mirror of
https://xff.cz/git/pinephone-keyboard
synced 2024-12-22 12:58:48 -05:00
50 lines
1.7 KiB
Plaintext
50 lines
1.7 KiB
Plaintext
Flashing tool from usb-flasher/ directory can be used to flash the
|
|
firmware over USB.
|
|
|
|
For example to build and flash your own firmware you could run these
|
|
commands:
|
|
|
|
# save the original firmware in case you want to restore it
|
|
|
|
./usb-flasher/ppkb-flasher info > saved-info.txt
|
|
./usb-flasher/ppkb-flasher --rom-out saved-rom.bin read
|
|
|
|
# build the new firmware (you may need sdcc 4.1, older versions may
|
|
# miscompile the firmware)
|
|
|
|
(cd firmware && ./build.sh)
|
|
|
|
# flash the new firmware
|
|
|
|
./usb-flasher/ppkb-flasher --rom-in firmware/build/fw.bin write reset
|
|
|
|
|
|
Full help output
|
|
----------------
|
|
|
|
Usage: ppkb-flasher [--rom-in <path>] [--rom-out <path>] [--verbose]
|
|
[--help] [<read|write|info|reset>...]
|
|
|
|
Options:
|
|
-i, --rom-in <path> Specify path to binary file you want to flash.
|
|
-o, --rom-out <path> Specify path where you want to store the contents
|
|
of code ROM read from the device.
|
|
-s, --rom-size <size> Specify how many bytes of code rom to flash
|
|
starting from offset 0x2000 in the rom file.
|
|
-v, --verbose Show details of what's going on.
|
|
-h, --help This help.
|
|
|
|
Commands:
|
|
info Display information about the firmware.
|
|
read Read ROM from the device to --rom-out file.
|
|
write Flash ROM file to the device from --rom-in.
|
|
reset Perform software reset of the MCU.
|
|
|
|
Format of the ROM files is a flat binary. Only the part of it starting
|
|
from 0x2000 will be flashed. Use -s to specify how many bytes to write.
|
|
|
|
Pinephone keyboard flashing tool 1.0
|
|
Written by Ondrej Jirman <megi@xff.cz>, 2021
|
|
Licensed under GPLv3, see https://xff.cz/git/pinephone-keyboard/ for
|
|
more information.
|