moparisthebest
/
pinephone-keyboard
mirror of https://xff.cz/git/pinephone-keyboard
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

Fix key release change detection in polling mode

This commit is contained in:
Ondrej Jirman 2021-06-18 18:28:56 +02:00
parent 93687e1b04
commit c8d8eef090
1 changed files with 30 additions and 26 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

56
firmware/main.c
View File

@ -61,7 +61,7 @@ void pinchange_interupt(void) __interrupt(IRQ_PINCHANGE)
if (P0_ICEN & BIT(1))
p6_changed = 1;
// clear input change flags
P0_ICEN = BIT(5);
@ -80,6 +80,8 @@ void timer1_interupt(void) __interrupt(IRQ_TIMER1)
TF1 = 0;
}
// {{{ Key scanning
// Keyboard has 12 columns and 6 rows directly connected to GPIOs.
//
// C1 P95
@ -262,6 +264,9 @@ void ext_int_deassert(void)
P1_P9M0 |= BIT(0);
}
// }}}
// {{{ I2C
#define I2C_N_REGS 16
static uint8_t i2c_transfer = 0x00;
@ -274,7 +279,7 @@ static uint8_t i2c_cmd_len = 0;
//XXX: we need this to be able to determine when it's safe to go back to sleep/power down
void i2c_b_interupt(void) __interrupt(IRQ_I2CB)
{
{
uint8_t saved_page = PAGESW;
uint8_t tmp;
PAGESW = 0;
@ -289,7 +294,7 @@ void i2c_b_interupt(void) __interrupt(IRQ_I2CB)
P0_I2CBCR1 &= ~BIT(7); // clear data pending
P0_I2CBINT &= ~BIT(7);
}
// handle RX
if (P0_I2CBINT & BIT(6)) {
tmp = P0_I2CBDB;
@ -301,7 +306,7 @@ void i2c_b_interupt(void) __interrupt(IRQ_I2CB)
P0_I2CBCR1 &= ~BIT(7); // clear data pending
P0_I2CBINT &= ~BIT(6);
}
// handle stop condition
if (P0_I2CBINT & BIT(4)) {
i2c_addr = 0;
@ -312,7 +317,7 @@ void i2c_b_interupt(void) __interrupt(IRQ_I2CB)
PAGESW = saved_page;
}
//
//
// Slave mode I2C for communication with the SoC
//
// - address is 0x15
@ -380,7 +385,7 @@ void main(void)
P0_DEVPD1 |= BIT(6) | BIT(5) | BIT(3) | BIT(1); // PWM A, timer 3, SPI, LVD
P0_DEVPD2 |= BIT(6) | BIT(3) | BIT(0); // PWM C, PWM B, I2C A
P0_DEVPD3 |= BIT(2) | BIT(1) | BIT(0); // PWM E, PWM D, PWM F
// keep UART, SPI, and I2C A in reset
//P0_PRST |= BIT(0) | BIT(2) | BIT(3);
@ -427,30 +432,29 @@ void main(void)
run_tasks = 0;
#if POLL_INPUT
// every 10ms we will scan the keyboard keys state and check for changes
// every 20ms we will scan the keyboard keys state and check for changes
uint8_t keys[12];
uint8_t active_rows = keyscan_scan(keys);
if (active_rows) {
// pressing FN+PINE+F switches to flashing mode (keys 1:2 3:5 5:2, electrically)
if (keys[0] & BIT(2) && keys[2] & BIT(5) && keys[4] & BIT(2)) {
EA = 0;
__asm__("mov r6,#0x5a");
__asm__("mov r7,#0xe7");
__asm__("ljmp 0x0118");
}
// check for changes
if (!memcmp(i2c_regs + 4, keys, 12))
continue;
// signal interrupt
memcpy(i2c_regs + 4, keys, 12);
ext_int_assert();
delay_us(100);
ext_int_deassert();
// pressing FN+PINE+F switches to flashing mode (keys 1:2 3:5 5:2, electrically)
if (keys[0] & BIT(2) && keys[2] & BIT(5) && keys[4] & BIT(2)) {
EA = 0;
__asm__("mov r6,#0x5a");
__asm__("mov r7,#0xe7");
__asm__("ljmp 0x0118");
}
// check for changes
if (!memcmp(i2c_regs + 4, keys, 12))
continue;
// signal interrupt
memcpy(i2c_regs + 4, keys, 12);
ext_int_assert();
delay_us(100);
ext_int_deassert();
#else
//XXX: not figured out yet, not tested, not working
if (scan_active) {
uint8_t active_rows = keyscan_scan(i2c_regs + 4);
if (!active_rows) {
@ -461,7 +465,7 @@ void main(void)
//PCON |= BIT(1);
//__asm__("nop");
}
// pressing FN+PINE+F switches to flashing mode (keys 1:2 3:5 5:2, electrically)
if (i2c_regs[4 + 0] & BIT(2) && i2c_regs[4 + 2] & BIT(5) && i2c_regs[4 + 4] & BIT(2)) {
EA = 0;
@ -472,7 +476,7 @@ void main(void)
continue;
}
if (keyscan_idle_is_pressed()) {
scan_active = 1;
keyscan_active();