pinephone-keyboard/firmware/em85f684a.h

295 lines
16 KiB
C
Raw Normal View History

2021-06-13 18:09:38 -04:00
/**
* Pinephone Keyboard Firmware
*
* Copyright (C) 2021 Ondřej Jirman <megi@xff.cz>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __EM85F684A_H__
#define __EM85F684A_H__
__sfr __at(0x87) PCON; // Power Control
__sfr __at(0xc0) RSTSC; // Reset Source
__sfr __at(0xbf) P0_PRST; // Peripheral Reset
__sfr __at(0xee) P0_WDTKEY; // WDT Key
__sfr __at(0xef) P0_WDTCR; // WDT Control Register
__sfr __at(0x88) TCON; // Timer Control
__sfr __at(0x89) TMOD; // Timer Mode
__sfr __at(0x8a) TL0; // Timer 0 Low Byte
__sfr __at(0x8b) TL1; // Timer 1 Low Byte
__sfr __at(0x8c) TH0; // Timer 0 High Byte
__sfr __at(0x8d) TH1; // Timer 1 High Byte
__sfr __at(0x8e) CKCON0; // Clock Control 0
__sfr __at(0x8f) CKCON1; // Clock Control 1 (LOWCLK)
__sfr __at(0xa8) IE; // Interrupt Enable
__sfr __at(0xb8) IP; // Interrupt Priority
__sfr __at(0x81) SP; // Stack Pointer
__sfr __at(0x82) DPL; // Data Pointer Low
__sfr __at(0x83) DPH; // Data Pointer High
__sfr __at(0x84) DPL1; // Data Pointer Low Byte 1
__sfr __at(0x85) DPH1; // Data Pointer High Byte 1
__sfr __at(0x86) PAGESW; // Page Switch
__sfr __at(0xd0) PSW0; // Program Status Word 0
__sfr __at(0xd8) PSW1; // Program Status Word 1
__sfr __at(0xe0) ACC; // Accumulator
__sfr __at(0xf0) B; // B Register
__sfr __at(0x98) SCON; // Serial Control
__sfr __at(0x99) SBUF; // Serial Data Buffer
__sfr __at(0x80) P5; // Port 5 Data Registers
__sfr __at(0x90) P6; // Port 6 Data Registers
__sfr __at(0xa0) P7; // Port 7 Data Registers
__sfr __at(0xb0) P8; // Port 8 Data Registers
__sfr __at(0xe8) P9; // Port 9 Data Registers
__sfr __at(0xf5) P0_PHCON1; // Pull-High Control 1
__sfr __at(0xf7) P0_PHDSC1; // Port High Drive/Sink Control 1
__sfr __at(0xf9) P0_P5M0; // Port 5 Configuration Mode 0 Registers
__sfr __at(0xfa) P0_P6M0; // Port 6 Configuration Mode 0 Registers
__sfr __at(0xfb) P0_P7M0; // Port 7 Configuration Mode 0 Registers
__sfr __at(0xfc) P0_P8M0; // Port 8 Configuration Mode 0 Registers
__sfr __at(0xfd) P0_PHCON0; // Pull-High Control 0
__sfr __at(0xff) P0_PHDSC0; // Port High Drive/Sink Control 0
__sfr __at(0xf9) P1_P9M0; // Port 9 Configuration Mode 0 Registers
__sfr __at(0xfd) P1_PHCON2; // Pull-High Control 2
__sfr __at(0xff) P1_PHDSC2; // Port High Drive/Sink Control 2
__sfr __at(0xe9) P0_FLKEY; // Flash Key
__sfr __at(0xea) P0_FLCR; // Flash Control Register
__sfr __at(0xeb) P0_FPKEY; // Enhanced Protection Key
__sfr __at(0xec) P0_EPPOINTL; // Enhanced Protection Point Low Byte
__sfr __at(0xed) P0_EPPOINTH; // Enhanced Protection Point High Byte
__sfr __at(0x91) P0_ADCS; // ADCS(ADC Channel Select)
__sfr __at(0x92) P0_ADCR1; // ADC Control Register 1
__sfr __at(0x93) P0_ADCR2; // ADC Control Register 2
__sfr __at(0x94) P0_ADDH; // ADDH (Converted value AD11~AD4 of ADC)
__sfr __at(0x95) P0_ADDL; // ADDH (Converted value AD11~AD4 of ADC)
__sfr __at(0xa9) P0_TC3CR1; // TC3CR1: Timer 3 Control Register 1
__sfr __at(0xaa) P0_TC3CR2; // TC3CR1: Timer 3 Control Register 2
__sfr __at(0xab) P0_TC3DA; // Timer 3 DATA Buffer A
__sfr __at(0xac) P0_TC3DB; // Timer 3 DATA Buffer B
__sfr __at(0x9a) P0_SPIRX; // SPI Receive Data Buffer Control Register
__sfr __at(0x9b) P0_SPIBUFPTR1; // SPI Read FIFO counter(pointer) Register 1
__sfr __at(0x9c) P0_SPIBUFPTR2; // SPI Read FIFO counter(pointer) Register 2
__sfr __at(0xa1) P0_SPICON1; // SPICON1: SPI Control Register 1
__sfr __at(0xa2) P0_SPICON2; // SPICON2: SPI Control Register 2
__sfr __at(0xa3) P0_SPITDBR; // SPITDBR: SPI Transmit Data Buffer Register
__sfr __at(0xa4) P0_SPIRDBR; // SPIRDBR: SPI Receive Data Buffer Register
__sfr __at(0xa5) P0_SPISR1; // SPISR1: SPI Status Register 1
__sfr __at(0xa6) P0_SPISR2; // SPISR1: SPI Status Register 2
__sfr __at(0xa7) P0_SPITX; // SPI Transmit Data Buffer Control Register
__sfr __at(0xae) P0_ICEN; // Input-Change Enable
__sfr __at(0xaf) P0_EEXSF; // Extended External Interrupt Status Flag.
__sfr __at(0xb1) P0_EIE1; // Extended Interrupt Enable 1
__sfr __at(0xb2) P0_EIE2; // Extended Interrupt Enable 2
__sfr __at(0xb3) P0_EIE3; // Extended Interrupt Enable 3
__sfr __at(0xb5) P0_EXEN; // External Interrupt Pin Enable.
__sfr __at(0xb6) P0_EIESC1; // External Interrupt Edge Select Control 1
__sfr __at(0xb7) P0_EIESC2; // External Interrupt Edge Select Control 2
__sfr __at(0xb9) P0_EIP1; // Extended Interrupt Priority 1
__sfr __at(0xba) P0_EIP2; // Extended Interrupt Priority 2
__sfr __at(0xbb) P0_EIP3; // Extended Interrupt Priority 3
__sfr __at(0xc1) P0_I2CACR1; // I2CA Status and Control Register 1
__sfr __at(0xc2) P0_I2CACR2; // I2CA Status and Control Register 2
__sfr __at(0xc3) P0_I2CASA; // I2CA Slave Address Register
__sfr __at(0xc4) P0_I2CADB; // I2CA Data Buffer Register
__sfr __at(0xc5) P0_I2CADAL; // I2CA Device Address Register L
__sfr __at(0xc6) P0_I2CADAH; // I2CA Device Address Register H
__sfr __at(0xc7) P0_I2CASF; // I2CA status flag
__sfr __at(0xcd) P0_DEVPD1; // Peripheral power down
__sfr __at(0xce) P0_DEVPD2; // Peripheral power down
__sfr __at(0xcf) P0_DEVPD3; // Peripheral power down
__sfr __at(0xd1) P0_SMBTO1; // SMbus Time Out 1 Register
__sfr __at(0xd2) P0_SMBTR1; // SMbus Timer reload 1 Register
__sfr __at(0xd3) P0_SMBTO2; // SMbus Time Out 2 Register
__sfr __at(0xd4) P0_SMBTR2; // SMbus Timer reload 2 Register
__sfr __at(0xd5) P0_SMBTO3; // SMbus Time Out 3 Register
__sfr __at(0xd6) P0_SMBTR3; // SMbus Timer reload 3 Register
__sfr __at(0xd7) P0_I2CBINT; // I2C interrupt status and control register
__sfr __at(0xd9) P0_I2CBCR1; // I2CB status and control register 1
__sfr __at(0xda) P0_I2CBCR2; // I2CB status and control register 2
__sfr __at(0xdb) P0_I2CBSA; // I2CB Slave Address Register
__sfr __at(0xdc) P0_I2CBDB; // I2CB Data Buffer Register
__sfr __at(0xdd) P0_I2CBDAL; // I2CB Device Address Register L
__sfr __at(0xde) P0_I2CBDAH; // I2CB Device Address Register H
__sfr __at(0xdf) P0_I2CBCR3; // I2CB status and control register 3
__sfr __at(0xe1) P0_I2CBCR4; // I2CB status and control register 4
__sfr __at(0xe2) P0_I2CBAUTOCNT; // I2C SCL auto-counter
__sfr __at(0xe3) P0_I2CBSCLFIR; // I2CB SCL digital filter
__sfr __at(0xe4) P0_I2CBSDAFIR; // I2CB SDA digital filter
__sfr __at(0xe5) P0_I2CBSTASU; // I2C start/stop setup time timing register
__sfr __at(0xe6) P0_I2CBSTADH; // I2C start/stop hold time timing register
__sfr __at(0x91) P1_IRCTEST; // IRC Test Control Register
__sfr __at(0xa1) P1_STBCNT; // IRC Stable Count Register
__sfr __at(0xa2) P1_IRCCTRL; // IRC Control Register
__sfr __at(0xa3) P1_RETRIMTIME; // IRC Re-Trim Period Register
__sfr __at(0xa4) P1_IRCFCVAL; // IRC FC Value Register
__sfr __at(0xa5) P1_IRCCAVAL; // IRC CA Value Register
__sfr __at(0xa6) P1_IRCFRVAL; // IRC FR Value Register
__sfr __at(0xa7) P1_AUTOTRIMSTA; // IRC Auto-Trim Status Register
__sfr __at(0xa9) P1_MTFCCTRL; // IRC Manual-Trim FC Value Control Register
__sfr __at(0xaa) P1_MTCACTRL; // IRC Manual-Trim CA Value Control Register
__sfr __at(0xab) P1_MTFRCTRL; // IRC Manual-Trim FR Value Control Register
__sfr __at(0xac) P1_SOFCNTL; // IRC SOF Count Low Byte Register
__sfr __at(0xad) P1_SOFCNTH; // IRC SOF Count Low Byte Register
__sfr __at(0xae) P1_UDCACKCTRL; // UDC ACK Interrupt Control Register
__sfr __at(0xaf) P1_EPASCTRL; // Endpoint Access Control Register
__sfr __at(0xb1) P1_UDCCTRL; // UDCCTRL: UDC Control Register
__sfr __at(0xb2) P1_UDCSTA; // UDC Status Register
__sfr __at(0xb3) P1_UDCCFSTA; // UDC Load Configuration Status Register
__sfr __at(0xb4) P1_UDCCFDATA; // UDC Load Configuration Data Register
__sfr __at(0xb5) P1_UDCINT0EN; // UDC Interrupt0 Enable Register
__sfr __at(0xb6) P1_UDCINT1EN; // UDC Interrupt1 Enable Register
__sfr __at(0xb7) P1_UDCINT2EN; // UDC Interrupt2 Enable Register
__sfr __at(0xb9) P1_UDCINT0STA; // UDC Interrupt0 Status Register
__sfr __at(0xba) P1_UDCINT1STA; // UDC Interrupt1 Status Register
__sfr __at(0xbb) P1_UDCINT2STA; // UDC Interrupt2 Status Register
__sfr __at(0xbc) P1_UDCEPCTRL; // Device End-point Control Register
__sfr __at(0xbd) P1_UDCEPBUF0CTRL; // Device End-point Buffer0 Control Register
__sfr __at(0xbe) P1_UDCEPBUF1CTRL; // Device End-point Buffer1 Control Register
__sfr __at(0xbf) P1_UDCEP0BUFDATA; // UDC Endpoint0 Data Register
__sfr __at(0xc1) P1_UDCEP1BUFDATA; // UDC Endpoint1 Data Register
__sfr __at(0xc2) P1_UDCEP2BUFDATA; // UDC Endpoint2 Data Register
__sfr __at(0xc3) P1_UDCEP3BUFDATA; // UDC Endpoint3 Data Register
__sfr __at(0xc4) P1_UDCEP4BUFDATA; // UDC Endpoint4 Data Register
__sfr __at(0xc5) P1_UDCBUFSTA; // UDC Buffer Status Register
__sfr __at(0xc9) P1_UDCEP1DATAINCNT; // UDC Endpoint1 Data In Count Register
__sfr __at(0xca) P1_UDCEP1DATAOUTCNT; // UDC Endpoint1 Data Out Count Register
__sfr __at(0xcb) P1_UDCEP2DATAINCNT; // UDC Endpoint2 Data In Count Register
__sfr __at(0xcc) P1_UDCEP2DATAOUTCNT; // UDC Endpoint2 Data Out Count Register
__sfr __at(0xcd) P1_UDCEP3DATAINCNT; // UDC Endpoint3 Data In Count Register
__sfr __at(0xce) P1_UDCEP3DATAOUTCNT; // UDC Endpoint3 Data Out Count Register
__sfr __at(0xcf) P1_UDCEP4DATAINCNT; // UDC Endpoint4 Data In Count Register
__sfr __at(0xd1) P1_UDCEP4DATAOUTCNT; // UDC Endpoint4 Data Out Count Register
__sfr __at(0xd2) P1_UDCEP1BUFDEPTH; // UDC Endpoint1 Buffer Depth Register
__sfr __at(0xd3) P1_UDCEP2BUFDEPTH; // UDC Endpoint2 Buffer Depth Register
__sfr __at(0xd4) P1_UDCEP3BUFDEPTH; // UDC Endpoint3 Buffer Depth Register
__sfr __at(0xd5) P1_UDCEP4BUFDEPTH; // UDC Endpoint4 Buffer Depth Register
__sfr __at(0xd6) P1_PHYTEST0; // PHY Test0 Mode Register
__sfr __at(0xd7) P1_PHYTEST1; // PHY Test1 Mode Register
__sfr __at(0xd9) P1_UDCRESCTRL; // UDC Response Control Register
__sfr __at(0xda) P1_USBCTRL; // UDC ACK Interrupt Control Register
__sfr __at(0xdb) P1_SE1CTL; // SE1 Control register
__sfr __at(0xdc) P1_PWMDTR; // PWMA Control Register
__sfr __at(0xdd) P1_PWMDTCR; // Dead Time Control Register
__sfr __at(0xde) P1_TMREN; // PWM Source Clock Control Register
__sfr __at(0xdf) P1_PWMSF; // PWM Status Flag
__sfr __at(0xe1) P1_PWMACR; // PWMA Control Register
__sfr __at(0xe2) P1_PRDAL; // Low Byte of PWMA Period
__sfr __at(0xe4) P1_DTAL; // Low Byte of PWMA Duty
__sfr __at(0xe6) P1_TMRAL; // Low Byte of PWMA Timer
__sfr __at(0xe9) P1_PWMBCR; // PWMB Control Register
__sfr __at(0xea) P1_PRDBL; // Low Byte of PWMB Period
__sfr __at(0xec) P1_DTBL; // Low Byte of PWMB Timer
__sfr __at(0xee) P1_TMRBL; // Low Byte of PWMB Timer
__sfr __at(0xf1) P1_PWMCCR; // PWMC Control Register
__sfr __at(0xf2) P1_PRDCL; // Low Byte of PWMC Period
__sfr __at(0xf4) P1_DTCL; // Low Byte of PWMB Timer
__sfr __at(0xf6) P1_TMRCL; // Low Byte of PWMB Timer
__sbit __at(0xc7) SWRSF; // Software Reset Force and Flag
__sbit __at(0xc2) WTSF; // Watchdog Reset Flag.
__sbit __at(0xc0) PORSF; // Power-On Flag
__sbit __at(0x8f) TF1; // Timer 1 Overflow Flag.
__sbit __at(0x8e) TR1; // Timer 1 Run Control.
__sbit __at(0x8d) TF0; // Timer 0 Overflow Flag.
__sbit __at(0x8c) TR0; // Timer 0 Run Control.
__sbit __at(0x8b) IE1; // External Interrupt 1 Status Flag
__sbit __at(0x8a) IT1; // External Interrupt 1 Type Select
__sbit __at(0x89) IE0; // External Interrupt 0 Status Flag
__sbit __at(0x88) IT0; // External Interrupt 0 Type Select
__sbit __at(0xaf) EA; // Enable All Interrupt
__sbit __at(0xae) ICIE; // Input-Change Interrupts
__sbit __at(0xac) ES0; // Enable UART Interrupt
__sbit __at(0xab) ET1; // Enable Timer 1 Interrupt
__sbit __at(0xaa) EX1; // Enable External Interrupt 1.
__sbit __at(0xa9) ET0; // Enable Timer 0 Interrupt
__sbit __at(0xa8) EX0; // Enable External Interrupt 0
__sbit __at(0xbe) PICIE; // Input-Change Interrupt Priority Control.
__sbit __at(0xbc) PS0; // UART Interrupt Priority Control.
__sbit __at(0xbb) PT1; // Timer 1 Interrupt Priority Control.
__sbit __at(0xba) PX1; // External Interrupt 1 Priority Control.
__sbit __at(0xb9) PT0; // Timer 0 Interrupt Priority Control.
__sbit __at(0xb8) PX0; // External Interrupt 0 Priority Control
__sbit __at(0xd7) CY; // Carry Flag.
__sbit __at(0xd6) AC; // Auxiliary Carry Flag
__sbit __at(0xd5) F0; // User Flag 0.
__sbit __at(0xd2) OV; // Overflow Flag.
__sbit __at(0xd1) F1; // User Flag 1
__sbit __at(0xd0) PARITY; // Parity Flag
__sbit __at(0xd8) SHSF; // System-Hold Flag
// GPIO port data register bits
__sbit __at(0x87) P57;
__sbit __at(0x86) P56;
__sbit __at(0x85) P55;
__sbit __at(0x84) P54;
__sbit __at(0x83) P53;
__sbit __at(0x82) P52;
__sbit __at(0x81) P51;
__sbit __at(0x80) P50;
__sbit __at(0x97) P67;
__sbit __at(0x96) P66;
__sbit __at(0x95) P65;
__sbit __at(0x94) P64;
__sbit __at(0x93) P63;
__sbit __at(0x92) P62;
__sbit __at(0x91) P61;
__sbit __at(0x90) P60;
__sbit __at(0xa7) P77;
__sbit __at(0xa6) P76;
__sbit __at(0xa5) P75;
__sbit __at(0xa4) P74;
__sbit __at(0xa3) P73;
__sbit __at(0xa2) P72;
__sbit __at(0xa1) P71;
__sbit __at(0xa0) P70;
__sbit __at(0xb7) P87;
__sbit __at(0xb6) P86;
__sbit __at(0xb5) P85;
__sbit __at(0xb4) P84;
__sbit __at(0xb3) P83;
__sbit __at(0xb2) P82;
__sbit __at(0xb1) P81;
__sbit __at(0xb0) P80;
__sbit __at(0xef) P97;
__sbit __at(0xee) P96;
__sbit __at(0xed) P95;
__sbit __at(0xec) P94;
__sbit __at(0xeb) P93;
__sbit __at(0xea) P92;
__sbit __at(0xe9) P91;
__sbit __at(0xe8) P90;
#define IRQ_EINT0 0 // External Interrupt 0
#define IRQ_TIMER0 1 // Timer0 Overflow
#define IRQ_EINT1 2 // External Interrupt 1
#define IRQ_TIMER1 3 // Timer1 Overflow
#define IRQ_UART0 4 // Serial Port 0
#define IRQ_PINCHANGE 6 // PIN CHANGE Interrupt 0
#define IRQ_SYSTEMHOLD 8 // System Hold Interrupt
#define IRQ_INT2_3 10 // External Interrupt 2~3
#define IRQ_SPI 11 // SPI Interrupt
#define IRQ_ADC 13 // ADC Conversion Complete
#define IRQ_TIMER2 14 // Timer2 Overflow
#define IRQ_PWMA 15 // PWMA Interrupt
#define IRQ_USB 17 // USB Interrupt
#define IRQ_I2CA 20 // I2CA Interrupt
#define IRQ_PWMB 23 // PWMB Interrupt
#define IRQ_PWMC 24 // PWMC Interrupt
#define IRQ_I2CB 28 // I2CB Interrupt
#endif