#!/usr/bin/env bash # Pi-hole: A black hole for Internet advertisements # by Jacob Salmela # Network-wide ad blocking via your Raspberry Pi # # pi-hole.net/donate # # Install with this command (from your Pi): # # curl -L install.pi-hole.net | bash ######## VARIABLES ######### tmpLog=/tmp/pihole-install.log instalLogLoc=/etc/pihole/install.log # Get the screen size in case we need a full-screen message and so we can display a dialog that is sized nicely screenSize=$(stty -a | tr \; \\012 | egrep 'rows|columns' | cut '-d ' -f3) # Find the rows and columns rows=$(stty -a | tr \; \\012 | egrep 'rows' | cut -d' ' -f3) columns=$(stty -a | tr \; \\012 | egrep 'columns' | cut -d' ' -f3) # Divide by two so the dialogs take up half of the screen, which looks nice. r=$(( rows / 2 )) c=$(( columns / 2 )) # Find IP used to route to outside world IPv4info=$(ip route get 8.8.8.8) IPv4dev=$(echo $IPv4info| awk '{print $5}') IPv4addr=$(ip -o -f inet addr show dev $IPv4dev | awk '{print $4}') IPv4gw=$(echo $IPv4info | awk '{print $3}') # IPv6 support to be added later #IPv6eui64=$(ip addr show | awk '/scope\ global/ && /ff:fe/ {print $2}' | cut -d'/' -f1) #IPv6linkLocal=$(ip addr show | awk '/inet/ && /scope\ link/ && /fe80/ {print $2}' | cut -d'/' -f1) availableInterfaces=$(ip link show | awk -F' ' '/[0-9]: [a-z]/ {print $2}' | grep -v "lo" | cut -d':' -f1) dhcpcdFile=/etc/dhcpcd.conf ####### FUCNTIONS ########## backupLegacyPihole() { if [[ -f /etc/dnsmasq.d/adList.conf ]];then echo "Original Pi-hole detected. Initiating sub space transport" sudo mkdir -p /etc/pihole/original/ sudo mv /etc/dnsmasq.d/adList.conf /etc/pihole/original/adList.conf.$(date "+%Y-%m-%d") sudo mv /etc/dnsmasq.conf /etc/pihole/original/dnsmasq.conf.$(date "+%Y-%m-%d") sudo mv /etc/resolv.conf /etc/pihole/original/resolv.conf.$(date "+%Y-%m-%d") sudo mv /etc/lighttpd/lighttpd.conf /etc/pihole/original/lighttpd.conf.$(date "+%Y-%m-%d") sudo mv /var/www/pihole/index.html /etc/pihole/original/index.html.$(date "+%Y-%m-%d") sudo mv /usr/local/bin/gravity.sh /etc/pihole/original/gravity.sh.$(date "+%Y-%m-%d") else : fi } welcomeDialogs() { # Display the welcome dialog whiptail --msgbox --backtitle "Welcome" --title "Pi-hole automated installer" "This installer will transform your Raspberry Pi into a network-wide ad blocker!" $r $c # Explain the need for a static address whiptail --msgbox --backtitle "Initating network interface" --title "Static IP Needed" "The Pi-hole is a SERVER so it needs a STATIC IP ADDRESS to function properly. In the next section, you can choose to use your current network settings (DHCP) or to manually edit them." $r $c } chooseInterface() { # Turn the available interfaces into an array so it can be used with a whiptail dialog interfacesArray=() while read -r line do interfacesArray+=("$line" "available" "ON") done <<< "$availableInterfaces" # Find out how many interfaces are available to choose from interfaceCount=$(echo "$availableInterfaces" | wc -l) chooseInterfaceCmd=(whiptail --separate-output --radiolist "Choose An Interface" $r $c $interfaceCount) chooseInterfaceOptions=$("${chooseInterfaceCmd[@]}" "${interfacesArray[@]}" 2>&1 >/dev/tty) for desiredInterface in $chooseInterfaceOptions do piholeInterface=$desiredInterface echo "Using interface: $piholeInterface" echo ${piholeInterface} > /tmp/piholeINT done } use4andor6() { # Let use select IPv4 and/or IPv6 cmd=(whiptail --separate-output --checklist "Select Protocols" $r $c 2) options=(IPv4 "Block ads over IPv4" on IPv6 "Block ads over IPv4" off) choices=$("${cmd[@]}" "${options[@]}" 2>&1 >/dev/tty) clear for choice in $choices do case $choice in IPv4) echo "IPv4 selected." useIPv4=true ;; IPv6) echo "IPv6 selected." useIPv6=true ;; esac done } useIPv6dialog() { whiptail --msgbox --backtitle "Coming soon..." --title "IPv6 not yet supported" "I need your help for IPv6. Consider donating at: http://pi-hole.net/donate" $r $c } getStaticIPv4Settings() { # Ask if the user wannts to use DHCP settings as their static IP if (whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Do you want to use your current network settings as a static address? IP address: $IPv4addr Gateway: $IPv4gw" $r $c) then # If they choose yes, let the user know that the IP address will not be available via DHCP and may cause a conflict. whiptail --msgbox --backtitle "IP information" --title "FYI: IP Conflict" "It is possible your router could still try to assign this IP to a device, which would cause a conflict. But in most cases the router is smart enough to not do that. If you are worried, either manually set the address, or modify the DHCP reservation pool so it does not include the IP you want. It is also possible to use a DHCP reservation, but if you are going to do that, you might as well set a static address." $r $c # Nothing else to do since the variables are already set above else # Otherwise, we need to ask the user to input their desired settings. # Start by getting the IPv4 address (pre-filling it with info gathered from DHCP) # Start a loop to let the user enter their information with the chance to go back and edit it if necessary until [[ $ipSettingsCorrect = True ]] do # Ask for the IPv4 address IPv4addr=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 address" --inputbox "Enter your desired IPv4 address" $r $c $IPv4addr 3>&1 1>&2 2>&3) if [[ $? = 0 ]];then echo "Your static IPv4 address: $IPv4addr" # Ask for the gateway IPv4gw=$(whiptail --backtitle "Calibrating network interface" --title "IPv4 gateway (router)" --inputbox "Enter your desired IPv4 default gateway" $r $c $IPv4gw 3>&1 1>&2 2>&3) if [[ $? = 0 ]];then echo "Your static IPv4 gateway: $IPv4gw" # Give the user a chance to review their settings before moving on if (whiptail --backtitle "Calibrating network interface" --title "Static IP Address" --yesno "Are these settings correct? IP address: $IPv4addr Gateway: $IPv4gw" $r $c)then # If the settings are correct, then we need to set the piholeIP # Saving it to a temporary file us to retrieve it later when we run the gravity.sh script echo ${IPv4addr%/*} > /tmp/piholeIP # After that's done, the loop ends and we move on ipSettingsCorrect=True else # If the settings are wrong, the loop continues ipSettingsCorrect=False fi else # Cancelling gateway settings window ipSettingsCorrect=False echo "User canceled." exit fi else # Cancelling IPv4 settings window ipSettingsCorrect=False echo "User canceled." exit fi done # End the if statement for DHCP vs. static fi } setStaticIPv4() { # Append these lines to /etc/dhcpcd.conf to enable a static IP echo "interface $piholeInterface static ip_address=$IPv4addr static routers=$IPv4gw static domain_name_servers=$IPv4gw" | sudo tee -a $dhcpcdFile >/dev/null sudo ip addr replace dev $piholeInterface $IPv4addr } installScripts(){ sudo curl -o /usr/local/bin/gravity.sh https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/gravity.sh sudo curl -o /usr/local/bin/chronometer.sh https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/Scripts/chronometer.sh sudo curl -o /usr/local/bin/whitelist.sh https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/Scripts/whitelist.sh sudo curl -o /usr/local/bin/piholeLogFlush.sh https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/Scripts/piholeLogFlush.sh sudo chmod 755 /usr/local/bin/{gravity,chronometer,whitelist,piholeLogFlush}.sh } installConfigs(){ sudo mv /etc/dnsmasq.conf /etc/dnsmasq.conf.orig sudo mv /etc/lighttpd/lighttpd.conf /etc/lighttpd/lighttpd.conf.orig sudo curl -o /etc/dnsmasq.conf https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/dnsmasq.conf sudo curl -o /etc/lighttpd/lighttpd.conf https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/lighttpd.conf sudo sed -i "s/@INT@/$piholeInterface/" /etc/dnsmasq.conf } stopServices(){ sudo service dnsmasq stop || true sudo service lighttpd stop || true } installDependencies(){ sudo apt-get update sudo apt-get -y upgrade sudo apt-get -y install dnsutils bc toilet sudo apt-get -y install dnsmasq sudo apt-get -y install lighttpd php5-common php5-cgi php5 } installWebAdmin(){ sudo wget https://github.com/jacobsalmela/AdminLTE/archive/master.zip -O /var/www/master.zip sudo unzip -oq /var/www/master.zip -d /var/www/html/ sudo mv /var/www/html/AdminLTE-master /var/www/html/admin sudo rm /var/www/master.zip 2>/dev/null } installPiholeWeb(){ sudo mkdir /var/www/html/pihole sudo mv /var/www/html/index.lighttpd.html /var/www/html/index.lighttpd.orig sudo curl -o /var/www/html/pihole/index.html https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/index.html } installCron(){ sudo mv /etc/crontab /etc/crontab.orig sudo curl -o /etc/crontab https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/pihole.cron } installPiLog(){ sudo touch /var/log/pihole.log sudo chmod 644 /var/log/pihole.log sudo chown dnsmasq:root /var/log/pihole.log } installPihole() { installDependencies stopServices sudo chown www-data:www-data /var/www/html sudo chmod 775 /var/www/html sudo usermod -a -G www-data pi sudo lighty-enable-mod fastcgi fastcgi-php installScripts installConfigs installWebAdmin installPiholeWeb installCron installPiLog sudo /usr/local/bin/gravity.sh } ######## SCRIPT ############ # Start the installer welcomeDialogs # Just back up the original Pi-hole right away since it won't take long and it gets it out of the way backupLegacyPihole # Find interfaces and let the user choose one chooseInterface # Let the user decide if they want to block ads over IPv4 and/or IPv6 use4andor6 # Decide is IPv4 will be used if [[ "$useIPv4" = true ]];then echo "Using IPv4" getStaticIPv4Settings setStaticIPv4 else useIPv4=false echo "IPv4 will NOT be used." fi # Decide is IPv6 will be used if [[ "$useIPv6" = true ]];then # If only IPv6 is selected, exit because it is not supported yet if [[ "$useIPv6" = true ]] && [[ "$useIPv4" = false ]];then useIPv6dialog exit else useIPv6dialog fi else useIPv6=false echo "IPv6 will NOT be used. Consider a donation at pi-hole.net/donate" fi # Install and log everything to a file installPihole | tee $tmpLog # Move the log file into /etc/pihole for storage sudo mv $tmpLog $instalLogLoc whiptail --msgbox --backtitle "Make it so." --title "Installation Complete!" "Configure your devices to use the Pi-hole as their DNS server using this IP: $IPv4addr. If you set a new IP address, it should work fine, but you may want to reboot the Pi at some point. The install log is in /etc/pihole." $r $c sudo service dnsmasq start sudo service lighttpd start