diff --git a/automated install/basic-install.sh b/automated install/basic-install.sh index 7c48fdb..416c421 100755 --- a/automated install/basic-install.sh +++ b/automated install/basic-install.sh @@ -1,29 +1,37 @@ #!/bin/bash -# Pi-hole automated install -# Raspberry Pi Ad-blocker +# Pi-hole: A black hole for Internet advertisements +# by Jacob Salmela +# Network-wide ad blocking via your Raspberry Pi # -# Install with this command (from the Pi): +# pi-hole.net/donate # -# curl -s "https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/automated%20install/basic-install.sh" | bash +# Install with this command (from your Pi): # -# Or run the commands below in order +# curl -L install.pi-hole.net | bash -clear -echo " _____ _ _ _ " -echo " | __ (_) | | | | " -echo " | |__) | __ | |__ ___ | | ___ " -echo " | ___/ | |__| | '_ \ / _ \| |/ _ \ " -echo " | | | | | | | | (_) | | __/ " -echo " |_| |_| |_| |_|\___/|_|\___| " -echo " " -echo " Raspberry Pi Ad-blocker " -echo " " -echo "Set a static IP before running this!" -echo " " -echo " Press Enter when ready " -echo " " -read +######## VARIABLES ######### +# Get the screen size in case we need a full-screen message and so we can display a dialog that is sized nicely +screenSize=$(stty -a | tr \; \\012 | egrep 'rows|columns' | cut '-d ' -f3) +# Find the rows and columns +rows=$(stty -a | tr \; \\012 | egrep 'rows' | cut -d' ' -f3) +columns=$(stty -a | tr \; \\012 | egrep 'columns' | cut -d' ' -f3) + +# Divide by two so the dialogs take up half of the screen, which looks nice. +r=$(( rows / 2 )) +c=$(( columns / 2 )) + +# Get the current network settings +IPv4addr=$(ip -4 addr show | awk '{match($0,/[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+/); ip = substr($0,RSTART,RLENGTH); print ip}' | sed '/^\s*$/d' | grep -v "127.0.0.1") +IPv4mask=$(ifconfig | awk -F':' '/inet addr/ && !/127.0.0.1/ {print $4}') +IPv4gw=$(ip route show | awk '/default\ via/ {print $3}') + +# IPv6 support to be added later +IPv6addr=$(ip addr show | awk '/scope\ global/ && /ff:fe/ {print $2}' | cut -d'/' -f1) + +####### FUCNTIONS ########## +backupLegacyPihole() +{ if [[ -f /etc/dnsmasq.d/adList.conf ]];then echo "Original Pi-hole detected. Initiating sub space transport..." sudo mkdir -p /etc/pihole/original/ @@ -36,58 +44,149 @@ if [[ -f /etc/dnsmasq.d/adList.conf ]];then else : fi +} -echo "Updating the Pi..." -sudo apt-get update -sudo apt-get -y upgrade +######## SCRIPT ############ +# Just back up the original Pi-hole right away since it won't take long and it gets it out of the way +backupLegacyPihole -echo "Installing tools..." -sudo apt-get -y install dnsutils -sudo apt-get -y install bc -sudo apt-get -y install toilet +# Display the welcome dialog +whiptail --msgbox --backtitle "Welcome..." --title "Pi-hole automated installer" "This installer will transform your Raspberry Pi into a network-wide ad blocker!" $r $c -echo "Installing DNS..." -sudo apt-get -y install dnsmasq -sudo update-rc.d dnsmasq enable +# Explain the need for a static address +whiptail --msgbox --backtitle "Initating network interface..." --title "Static IP Needed" "The Pi-hole is a SERVER so it needs a STATIC IP ADDRESS to function properly. -echo "Installing a Web server" -sudo apt-get -y install lighttpd php5-common php5-cgi php5 -sudo mkdir /var/www/html -sudo chown www-data:www-data /var/www/html -sudo chmod 775 /var/www/html -sudo usermod -a -G www-data pi +In the next section, you can choose to use your current network settings (DHCP) or to manually edit them." $r $c -echo "Stopping services to modify them..." -sudo service dnsmasq stop -sudo service lighttpd stop +# Ask if the user wannts to use DHCP settings as their static IP +if (whiptail --title "Static IP Address" --yesno "Do you want to use your current network settings as a static address? -echo "Backing up original config files and downloading Pi-hole ones..." -sudo mv /etc/dnsmasq.conf /etc/dnsmasq.conf.orig -sudo mv /etc/lighttpd/lighttpd.conf /etc/lighttpd/lighttpd.conf.orig -sudo mv /var/www/html/index.lighttpd.html /var/www/html/index.lighttpd.orig -sudo curl -o /etc/dnsmasq.conf "https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/dnsmasq.conf" -sudo curl -o /etc/lighttpd/lighttpd.conf "https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/lighttpd.conf" -sudo lighty-enable-mod fastcgi fastcgi-php -sudo mkdir /var/www/html/pihole -sudo curl -o /var/www/html/pihole/index.html "https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/index.html" + IP address: $IPv4addr + Subnet mask: $IPv4mask + Gateway: $IPv4gw" $r $c) then + # If they choose yes, let the user know that the IP address will not be available via DHCP and may cause a conflict. + whiptail --msgbox --backtitle "IP information..." --title "FYI: IP Conflict" "It is possible your router could still try to assign this IP to a device, which would cause a conflict. But in most cases the router is smart enough to not do that. -echo "Installing the Web interface..." -sudo wget https://github.com/jacobsalmela/AdminLTE/archive/master.zip -O /var/www/master.zip -sudo unzip /var/www/master.zip -d /var/www/html/ -sudo mv /var/www/html/AdminLTE-master /var/www/html/admin -sudo rm /var/www/master.zip 2>/dev/null -sudo touch /var/log/pihole.log -sudo chmod 644 /var/log/pihole.log -sudo chown dnsmasq:root /var/log/pihole.log +If you are worried, either manually set the address, or modify the DHCP reservation pool so it does not include the IP you want. -echo "Locating the Pi-hole..." -sudo curl -o /usr/local/bin/gravity.sh "https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/gravity.sh" -sudo curl -o /usr/local/bin/chronometer.sh "https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/Scripts/chronometer.sh" -sudo chmod 755 /usr/local/bin/gravity.sh -sudo chmod 755 /usr/local/bin/chronometer.sh +It is also possible to use a DHCP reservation, but if you are going to do that, you might as well set a static address." $r $c + # Nothing else to do since the variables are already set above +else + # Otherwise, we need to ask the user to input their desired settings. + # Start by getting the IPv4 address (pre-filling it with info gathered from DHCP) + # Start a loop to let the user enter their information with the chance to go back and edit it if necessary + until [[ $ipSettingsCorrect = True ]] + do + # Ask for the IPv4 address + IPv4addr=$(whiptail --backtitle "Calibrating network interface..." --title "IPv4 address" --inputbox "Enter your desired IPv4 address" $r $c $IPv4addr 3>&1 1>&2 2>&3) + if [[ $? = 0 ]];then + echo "Your static IPv4 address: $IPv4addr" + # Ask for the subnet mask + IPv4mask=$(whiptail --backtitle "Calibrating network interface..." --title "IPv4 netmask" --inputbox "Enter your desired IPv4 subnet mask" $r $c $IPv4mask 3>&1 1>&2 2>&3) + if [[ $? = 0 ]];then + echo "Your static IPv4 netmask: $IPv4mask" + # Ask for the gateway + IPv4gw=$(whiptail --backtitle "Calibrating network interface..." --title "IPv4 gateway (router)" --inputbox "Enter your desired IPv4 default gateway" $r $c $IPv4gw 3>&1 1>&2 2>&3) + if [[ $? = 0 ]];then + echo "Your static IPv4 gateway: $IPv4gw" + # Give the user a chance to review their settings before moving on + if (whiptail --title "Static IP Address" --yesno "Are these settings correct? + IP address: $IPv4addr + Subnet mask: $IPv4mask + Gateway: $IPv4gw" $r $c)then + # If the settings are correct, then we need to set the piholeIP + # Saving it to a temporary file us to retrieve it later when we run the gravity.sh script + echo $IPv4addr > /tmp/piholeIP + # After that's done, the loop ends and we move on + ipSettingsCorrect=True -echo "Entering the event horizon..." -sudo /usr/local/bin/gravity.sh + else + # If the settings are wrong, the loop continues + ipSettingsCorrect=False + fi + else + # Cancelling gateway settings window + ipSettingsCorrect=False + echo "User canceled." + exit + fi + else + # Cancelling subnet mask settings window + ipSettingsCorrect=False + echo "User canceled." + exit + fi + else + # Cancelling IPv4 settings window + ipSettingsCorrect=False + echo "User canceled." + exit + fi + done +# End the if statement for DHCP vs. static +fi -echo "Restarting..." -sudo reboot +# These are the commands to actually install the Pi-hole +# Create an associative array so we can display text to the user but run the associated command in the background. +declare -A cmdsAndEchoes=([sudo apt-get update]='Updating...' +[sudo apt-get -y upgrade]='Upgrading...' +[sudo apt-get -y install dnsutils bc toilet]='Installing chronomoter tools...' +[sudo apt-get -y install dnsmasq]='Installing a DNS server...' +[sudo apt-get -y install lighttpd php5-common php5-cgi php5]='Instaling a Web server and PHP...' +[sudo mkdir /var/www/html]='Making an HTML folder...' +[sudo chown www-data:www-data /var/www/html]='Setting permissions for the Web server...' +[sudo chmod 775 /var/www/html]='Setting permissions for the Web server...' +[sudo usermod -a -G www-data pi]='Setting permissions for the Web server...' +[sudo service dnsmasq stop]='Stopping dnsmasq to modify it...' +[sudo service lighttpd stop]='Stopping lighttpd to modify it...' +[sudo mv /etc/dnsmasq.conf /etc/dnsmasq.conf.orig]='Backing up the dnsmasq config file...' +[sudo mv /etc/lighttpd/lighttpd.conf /etc/lighttpd/lighttpd.conf.orig]='Backing up the lighttpd config file...' +[sudo mv /var/www/html/index.lighttpd.html /var/www/html/index.lighttpd.orig]='Backing up the default Web page...' +[sudo curl -o /etc/dnsmasq.conf https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/dnsmasq.conf]='Installing the dnsmasq config file...' +[sudo curl -o /etc/lighttpd/lighttpd.conf https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/lighttpd.conf]='Installing the lighttpd config file...' +[sudo lighty-enable-mod fastcgi fastcgi-php]='Enabling PHP...' +[sudo mkdir /var/www/html/pihole]='Making a directory for the Web interface...' +[sudo curl -o /var/www/html/pihole/index.html https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/index.html]='Installing a blank HTML page to take place of ads...' +[sudo wget https://github.com/jacobsalmela/AdminLTE/archive/master.zip -O /var/www/master.zip]='Downloading the Pi-hole dashboard...' +[sudo unzip /var/www/master.zip -d /var/www/html/]='Unpacking the dashboard...' +[sudo mv /var/www/html/AdminLTE-master /var/www/html/admin]='Renaming the dashboard...' +[sudo rm /var/www/master.zip 2>/dev/null]='Cleaning up the dashboard temp files...' +[sudo touch /var/log/pihole.log]='Creating a log file for the Pi-hole...' +[sudo chmod 644 /var/log/pihole.log]='Making sure the log is readable...' +[sudo chown dnsmasq:root /var/log/pihole.log]='Letting dnsmasq see the log file so stats can be displayed...' +[sudo curl -o /usr/local/bin/gravity.sh "https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/gravity.sh"]='Initating sub-space transport...' +[sudo curl -o /usr/local/bin/chronometer.sh "https://raw.githubusercontent.com/jacobsalmela/pi-hole/master/advanced/Scripts/chronometer.sh"]='Initating sub-space transport...' +[sudo chmod 755 /usr/local/bin/gravity.sh]='Making the scripts executable...' +[sudo chmod 755 /usr/local/bin/chronometer.sh]='Making the scripts executable...' +[sudo /usr/local/bin/gravity.sh]='Entering the event horizion...' +[sudo reboot]='Restarting...') + +# Everything in the parentheses is part of displaying the progress bar +( +# Get total number of commands to be run from the array +n=${#cmdsAndEchoes[*]}; + +# Set counter to increase every time a loop completes +i=0 + +# For each key in the array +for key in "${!cmdsAndEchoes[@]}" +do + +# Calculate the overall progress +percent=$(( 100*(++i)/n )) + +# Update dialog box using the value of each key in the array +# Show the percentage and the echo messages from the array +cat <