moparisthebest/pacman
1
0
Fork 0
mirror of https://github.com/moparisthebest/pacman synced 2024-11-16 14:25:21 -05:00
Code Issues Releases Wiki Activity
ccbef232c9
pacman/doc/PKGBUILD.5.txt
Cedric Staniewski 4d2ec3751c makepkg: allow the use of only a package() function 
For some packages, generally the 'any' arch ones, a build step is not
required and therefore can be skipped. In these cases, a package()
function without a build() one is sufficient.

As a side effect, this commit makes meta packages without any function
at all in the PKGBUILD possible.

Fixes FS#15147.

Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-15 19:33:03 -06:00

412 lines
15 KiB
Plaintext
Raw Blame History

/////
vim:set ts=4 sw=4 syntax=asciidoc noet:
/////
PKGBUILD(5)
===========
Name
----
PKGBUILD - Arch Linux package build description file
Synopsis
--------
PKGBUILD
Description
-----------
This manual page is meant to describe general rules about PKGBUILDs. Once a
PKGBUILD is written, the actual package is built using makepkg and installed
with pacman.
NOTE: If you are using Arch Linux and have a local copy of the Arch Build
System (ABS) tree on your computer, or are using another distribution that
provides a similar tree of build files, you can copy the provided
PKGBUILD.proto file to a new package build directory and make customizations to
suit your needs. An up to date prototype file can also be found in the source
distribution of this package.
Options and Directives
----------------------
The following is a list of standard options and directives available for use
in a PKGBUILD. These are all understood and interpreted by makepkg, and most
will be directly transferred to the built package.
If you need to create any custom variables for use in your build process, it is
recommended to name your custom variables with an '_' (underscore) prefix.
This will prevent any possible name clashes with internal makepkg variables.
For example, to store the base kernel version in a variable, use something
similar to `$_basekernver`.
*pkgname*::
The name of the package. This has be a unix-friendly name as it will be
used in the package filename.
*pkgver*::
The version of the software as released from the author (e.g. '2.7.1').
*pkgrel*::
This is the release number specific to the Arch Linux release. This
allows package maintainers to make updates to the package's configure
flags, for example. A pkgrel of 1 is typically used for each upstream
software release and is incremented for intermediate PKGBUILD updates.
*pkgdesc*::
This should be a brief description of the package and its functionality.
Try to keep the description to one line of text.
*url*::
This field contains a URL that is associated with the software being
packaged. This is typically the project's website.
*license (array)*::
This field specifies the license(s) that apply to the package.
Commonly-used licenses are found in '/usr/share/licenses/common'. If you
see the package's license there, simply reference it in the license
field (e.g. `license=('GPL')`). If the package provides a license not
found in '/usr/share/licenses/common', then you should include the license
in the package itself and set `license=('custom')` or
`license=('custom:LicenseName')`. The license should be placed in
'$pkgdir/usr/share/licenses/$pkgname' when building the package. If
multiple licenses are applicable for a package, list all of them:
`license=('GPL' 'FDL')`.
*install*::
Specifies a special install script that is to be included in the package.
This file should reside in the same directory as the PKGBUILD, and will
be copied into the package by makepkg. It does not need to be included
in the source array (e.g. `install=pkgname.install`).
*changelog*::
Specifies a changelog file that is to be included in the package.
This file should reside in the same directory as the PKGBUILD, and will
be copied into the package by makepkg. It does not need to be included
in the source array (e.g. `changelog=$pkgname.changelog`).
*source (array)*::
An array of source files required to build the package. Source files
must either reside in the same directory as the PKGBUILD file, or be a
fully-qualified URL that makepkg will use to download the file. In order
to make the PKGBUILD as useful as possible, use the $pkgname and $pkgver
variables if possible when specifying the download location. Any files
that are compressed will automatically be extracted, unless found in
the noextract array listed below.
+
It is also possible to specify an optional filename, which is helpful
with weird URLs and for handling multiple source files with the same
name. The syntax is: `source=('filename::url')`.
*noextract (array)*::
An array of filenames corresponding to those from the source array. Files
listed here will not be extracted with the rest of the source files. This
is useful for packages which use compressed data which is downloaded but
not necessary to uncompress.
*md5sums (array)*::
This array contains an MD5 hash for every source file specified in the
source array (in the same order). makepkg will use this to verify source
file integrity during subsequent builds. To easily generate md5sums, run
``makepkg -g >> PKGBUILD''. If desired, move the md5sums line to an
appropriate location.
*sha1sums, sha256sums, sha384sums, sha512sums (arrays)*::
Alternative integrity checks that makepkg supports; these all behave
similar to the md5sums option described above. To enable use and generation
of these checksums, be sure to set up the `INTEGRITY_CHECK` option in
linkman:makepkg.conf[5].
*groups (array)*::
An array of symbolic names that represent groups of packages, allowing
you to install multiple packages by requesting a single target. For
example, one could install all KDE packages by installing the 'kde' group.
*arch (array)*::
Defines on which architectures the given package is available (e.g.
`arch=('i686' 'x86_64')`). Packages that contain no architecture specific
files may use arch=('any').
*backup (array)*::
A space-delimited array of filenames, without preceding slashes, that
should be backed up if the package is removed or upgraded. This is
commonly used for packages placing configuration files in /etc. See
Handling Config Files in linkman:pacman[8] for more information.
*depends (array)*::
An array of packages that this package depends on to run. Packages in
this list should be surrounded with single quotes and contain at least
the package name. Entries can also include a version requirement of the
form 'name<>version', where <> is one of five comparisons: >= (greater
than or equal to), <= (less than or equal to), = (equal to), > (greater
than), or < (less than).
*makedepends (array)*::
An array of packages that this package depends on to build, but are not
needed at runtime. Packages in this list follow the same format as
depends.
*optdepends (array)*::
An array of packages (and accompanying reasons) that are not essential for
base functionality, but may be necessary to make full use of the contents
of this package. optdepends are currently for informational purposes only
and are not utilized by pacman during dependency resolution. The format
for specifying optdepends is:
optdepends=('fakeroot: for makepkg usage as normal user')
*conflicts (array)*::
An array of packages that will conflict with this package (i.e. they
cannot both be installed at the same time). This directive follows the
same format as depends. Versioned conflicts are also supported.
*provides (array)*::
An array of ``virtual provisions'' that this package provides. This allows
a package to provide dependencies other than its own package name. For
example, the dcron package can provide 'cron', which allows packages to
depend on 'cron' rather than 'dcron OR fcron'.
Versioned provisions are also possible, in the 'name=version' format.
For example, dcron can provide 'cron=2.0' to satisfy the 'cron>=2.0'
dependency of other packages. Provisions involving the '>' and '<'
operators are invalid as only specific versions of a package may be
provided.
*replaces (array)*::
An array of packages that this package should replace, and can be used
to handle renamed/combined packages. For example, if the 'j2re' package
is renamed to 'jre', this directive allows future upgrades to continue
as expected even though the package has moved. Sysupgrade is currently
the only pacman operation that utilizes this field, a normal sync will
not use its value.
*options (array)*::
This array allows you to override some of makepkg's default behavior
when building packages. To set an option, just include the option name
in the options array. To reverse the default behavior, place an ``!'' at
the front of the option. Only specify the options you specifically want
to override, the rest will be taken from linkman:makepkg.conf[5].
*NOTE:* 'force' is a special option only used in a linkman:PKGBUILD[5],
do not use it unless you know what you are doing.
*strip*;;
Strip symbols from binaries and libraries. If you frequently
use a debugger on programs or libraries, it may be helpful to
disable this option.
*docs*;;
Save doc directories. If you wish to delete doc directories,
specify `!docs` in the array.
*libtool*;;
Leave libtool (.la) files in packages. Specify `!libtool` to
remove them.
*emptydirs*;;
Leave empty directories in packages.
*zipman*;;
Compress man and info pages with gzip.
*ccache*;;
Allow the use of ccache during build. More useful in its negative
form `!ccache` with select packages that have problems building
with ccache.
*distcc*;;
Allow the use of distcc during build. More useful in its negative
form `!distcc` with select packages that have problems building
with distcc.
*makeflags*;;
Allow the use of user-specific makeflags during build as specified
in linkman:makepkg.conf[5]. More useful in its negative form
`!makeflags` with select packages that have problems building with
custom makeflags such as `-j2` (or higher).
*force*;;
Force the package to be upgraded by a pacman system upgrade
operation, even if the version number would normally not trigger
such an upgrade. This is useful when the version numbering scheme
of a package changes (or is alphanumeric). See linkman:pacman[8] for
more information on version comparisons.
build() Function
----------------
In addition to the above directives, the optional build() bash function usually
comprises the remainder of the PKGBUILD. This is directly sourced and executed by
makepkg, so anything that bash or the system has available is available for use
here. Be sure any exotic commands used are covered by `makedepends`.
All of the above variables such as `pkgname` and `pkgver` are available for use
in the build function. In addition, makepkg defines three variables for your
use during the build and install process. These three variables are as follows:
*startdir*::
This contains the absolute path to the directory where the PKGBUILD was
located, which is usually the output of `$(pwd)` when makepkg is started.
*srcdir*::
This points to the directory where makepkg extracts or copies all source
files.
*pkgdir*::
This points to the directory where makepkg bundles the installed package
(this directory will become the root directory of your built package).
If you create any variables of your own in the build function, it is
recommended to use the bash `local` keyword to scope the variable to inside
the build function.
package() Function
------------------
An optional package() function can be specified in addition to the build() function.
This function is run immediately after the build() function. When specified in
combination with the fakeroot BUILDENV option in linkman:makepkg.conf[5], fakeroot
usage will be limited to running the packaging stage. An existing build() function
will be run as the user calling makepkg.
Package Splitting
-----------------
makepkg supports building multiple packages from a single PKGBUILD. This is achieved
by assigning an array of package names to the `pkgname` directive. Each split package
uses a corresponding packaging function with name `package_foo()`, where `foo` is the
name of the split package.
All options and directives for the split packages default to the global values given
within the PKGBUILD. However, some of these can be overridden within each split
package's packaging function. The following variables can be overridden: `pkgver`,
`pkgrel`, `pkgdesc`, `arch`, `license`, `groups`, `depends`, `optdepends`,
`provides`, `conflicts`, `replaces`, `backup`, `options`, `install` and `changelog`.
An optional global directive is available when building a split package:
*pkgbase*::
The name used to refer to the group of packages in the output of makepkg
and in the naming of source-only tarballs. If not specified, the first
element in the `pkgname` array is used.
Install/Upgrade/Remove Scripting
--------------------------------
Pacman has the ability to store and execute a package-specific script when it
installs, removes, or upgrades a package. This allows a package to configure
itself after installation and perform an opposite action upon removal.
The exact time the script is run varies with each operation:
*pre_install*::
script is run right before files are extracted. One argument is passed:
new package version.
*post_install*::
script is run right after files are extracted. One argument is passed:
new package version.
*pre_upgrade*::
script is run right before files are extracted. Two arguments are passed
in the following order: new package version, old package version.
*post_upgrade*::
script is run after files are extracted. Two arguments are passed
in the following order: new package version, old package version.
*pre_remove*::
script is run right before files are removed. One argument is passed:
old package version.
*post_remove*::
script is run right after files are removed. One argument is passed:
old package version.
To use this feature, create a file such as 'pkgname.install' and put it in the
same directory as the PKGBUILD script. Then use the install directive:
install=pkgname.install
The install script does not need to be specified in the source array. A
template install file is available with the source distribution of this
program, or one may be provided by your distribution. For example, Arch Linux
provides prototype install files in the ABS tree.
Development Directives
----------------------
makepkg supports building development versions of packages without having to
manually update the pkgver in the PKGBUILD. This was formerly done using the
separate utility 'versionpkg'. In order to utilize this functionality, your
PKGBUILD must use correct variable names depending on the SCM being fetched
from.
*CVS*::
The generated pkgver will be the date the package is built.
*_cvsroot*;;
The root of the CVS repository.
*_cvsmod*;;
The CVS module to fetch.
*SVN*::
The generated pkgver will be the latest SVN revision number.
*_svntrunk*;;
The trunk of the SVN repository.
*_svnmod*;;
The SVN module to fetch.
*Git*::
The generated pkgver will be one formatted by the 'git-describe'
command, with '-' characters converted to '_' characters.
*_gitroot*;;
The URL (all protocols supported) to the GIT repository.
*_gitname*;;
GIT tag or branch to use.
*Mercurial*::
The generated pkgver will be the hg tip revision number.
*_hgroot*;;
The URL of the mercurial repository.
*_hgrepo*;;
The repository to follow.
*Darcs*::
The generated pkgver will be the date the package is built.
*_darcstrunk*;;
URL to the repository trunk.
*_darcsmod*;;
Darcs module to use.
*Bazaar*::
The generated pkgver will be the latest Bazaar revision number (revno).
*_bzrtrunk*;;
URL to the bazaar repository.
*_bzrmod*;;
Bazaar module to use.
Example
-------
The following is an example PKGBUILD for the 'patch' package. For more
examples, look through the build files of your distribution's packages. For
those using Arch Linux, consult the ABS tree.
[source,sh]
-------------------------------
include::PKGBUILD-example.txt[]
-------------------------------
See Also
--------
linkman:makepkg[8], linkman:pacman[8], linkman:makepkg.conf[5]
include::footer.txt[]
Reference in New Issue View Git Blame Copy Permalink