Fixes FS#17140.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
(cherry picked from commit 0199a7ee71)
Signed-off-by: Dan McGee <dan@archlinux.org>
We free'd the handle but didn't NULL out the global variable, leading to
problems if you try to reinitialize the library. Make sure we clean up after
ourselves.
Signed-off-by: Dan McGee <dan@archlinux.org>
Introduce $SRCPKGDEST to define a destination dir for source packages
instead of saving them in $PKGDEST with binary packages.
The simple patch doesn't break old behavior.
Signed-off-by: Nezmer <git@nezmer.info>
Signed-off-by: Dan McGee <dan@archlinux.org>
pkgbase is used in the following rm calls, and since pkgname can be
present when pkgbase is not, it is safer to check for pkgbase.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When makepkg exits in create_srcpackage(), the (temporary) srclinks
directory is left behind.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently, "makepkg -R" creates a package with a wrong updated $pkgver.
Signed-off-by: Nezmer <Nezmer@allurelinux.org>
[Allan: adjusted comment]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is particularly useful when using pacman wrappers which call sudo
by themselves and therefore should not be run as root.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
If PACMAN environment variable is set, makepkg will try to use this
command to check for installed dependencies and to install or remove
packages. Otherwise, makepkg will fall back to pacman.
Implements FS#13028.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
[Dan: move envvar section in manpage]
Signed-off-by: Dan McGee <dan@archlinux.org>
Add a check that the package does not contain references to the
folder it was built in.
Fixes FS#14751
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
download_internal is supposed to always set pm_errno but did not in many
cases.
The most important (and tested) change is the one concerning fetchStat. This
is typically where the code will fail when the network is down for example.
Before commit d2dbb04a9a, this fetchStat call did not exist and the
same kind of errors would be encountered in the fetchXGet call that follows.
I just copied the error printing to restore the old behavior.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
getopt should already ensure that optarg is not NULL when an argument is
required, but just be extra safe and double check it before using optarg.
To be honest, I only did that to make clang shut up and eliminate the last
warnings it reported.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This function was quite huge (~230 lines) and difficult to parse, now it is
slightly better.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Some users reported duplicated database entries in /var/lib/pacman/local/,
for example, both foo-1.0-1 and foo-2.0-1 subdirectories existed. (Bogus
3rd-party scripts, backup?) In this case pacman reported no error and its
behaviour was mysterious.
From now on, pacman detects this situation and prints an error message.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This ensures we never have trailing whitespace. Take the following text,
with line numbers added for clarity:
1. Title : item1 item2 item3 item4
2. item5 item6 item7 item8
3. item9 itemA itemB itemC
Laszlo Papp helpfully pointed out we would have two trailing spaces on line
three after the last item. However, we also had these trailing spaces on
lines one and two, which the initial patch didn't take care of. This can be
seen on something like `pacman -Qi glibc`.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a bit embarrassing. For example:
$ pacman -Qi mesa
...
Required By : mesa mesa mesa mesa mesa mesa
Something is clearly not right, and the problem was introduced in commit
0bc961. Fix the issue by getting the package name off the correct variable.
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows makepkg to only build a specified subset of packages
from a split PKGBUILD. This is very useful in combination with the
-R flag or when bumping the pkgrel of a single package.
Fixes FS#15956.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When PKGDEST is used, symlinks to the packages will be put in the build
directory. This combines the convenience of a global package cache with
the ease of having a package (i.e. a symlink) in the build directory for
testing and installation purpose.
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
[Allan: add comment documenting clean-up addition]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Sorry for this being such a huge patch, but I believe it is necessary for
quite a few reasons which I will attempt to explain herein. I've been
mulling this over for a while, but wasn't super happy with making the
download interface more complex. Instead, if we carefully order things in
the internal download code, we can actually make the interface simpler.
1. FS#15657 - This involves `name.db.tar.gz.part` files being left around the
filesystem, and then causing all sorts of issues when someone attempts to
rerun the operation they canceled. We need to ensure that if we resume a
download, we are resuming it on exactly the same file; if we cannot be
almost postive of that then we need to start over.
2. http://www.mail-archive.com/pacman-dev@archlinux.org/msg03536.html - Here
we have a lighttpd bug to ruin the day. If we send both a Range: header and
If-Modified-Since: header across the wire in a GET request, lighttpd doesn't
do what we want in several cases. If the file hadn't been modified, it
returns a '304 Not Modified' instead of a '206 Partial Content'. We need to
do a stat (e.g. HEAD in HTTP terms) operation here, and the proceed
accordingly based off the values we get back from it.
3. The mtime stuff was rather ugly, and relied on the called function to
write back to a passed in reference, which isn't the greatest. Instead, use
the power of the filesystem to contain this info. Every file downloaded
internally is now carefully timestamped with the remote file time. This
should allow the resume logic to work. In order to guarantee this, we need
to implement a signal handler that catches interrupts, notifies the running
code, and causes it to set the mtimes on the file. It then rethrows the
signal so the pacman signal handler (or any frontend) works as expected.
4. We did a lot of funky stuff in trying to track the DB last modified time.
It is a lot easier to just keep the downloaded DB file around and track the
time on that rather than in a funky dot file. It also kills a lot of code.
5. For GPG verification of the databases down the road, we are going to need
the DB file around for at least a short bit of time anyway, so this gets us
closer to that.
Signed-off-by: Dan McGee <dan@archlinux.org>
[Xav: fixed printf with off_t]
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
* It makes the code clearer to read/understand
* Cppcheck tool doesn't show this anymore: [./util.c:215]: (error) Resource leak: fd
[Dan: don't change the coding style]
Signed-off-by: Dan McGee <dan@archlinux.org>
For some packages, generally the 'any' arch ones, a build step is not
required and therefore can be skipped. In these cases, a package()
function without a build() one is sufficient.
As a side effect, this commit makes meta packages without any function
at all in the PKGBUILD possible.
Fixes FS#15147.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Since commit fb97d32, which brought in this test, support for split
PKGBUILDs was added, and therefore, all values of pkgname and also
pkgbase have to be checked now.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
makepkg looks for a package() function when building a single package
but package_$pkgname() style package functions when building a split
package. This patch allows the use of a package_$pkgname() function
when building a single package for consistency. This is achieved by
having makepkg consider a non-split package with a package_$pkgname()
function as a split package (creating just the one package).
Fixes FS#16622.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
* FS#16623, second half of makepkg
* Includes stuff like -o to ||, -a to &&, etc.
* if [ $(type ... preserved due to a bash bug with [[ and set -e and ERR traps
Signed-off-by: Isaac Good <pacman@isaac.otherinbox.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
* FS#16623, first half of makepkg
* Includes stuff like -o to ||, -a to &&, etc.
* if [ $(type ... preserved due to a bash bug with [[ and set -e and ERR traps
Signed-off-by: Isaac Good <pacman@isaac.otherinbox.com>
[Dan: made commit message useful]
Signed-off-by: Dan McGee <dan@archlinux.org>
FS#16623 suggested this change for makepkg; this patch applies it to the
remaining files in the scripts directory.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Dan McGee <dan@archlinux.org>
The source command triggers / might trigger the ERR trap which makes
makepkg abort right after a successful installation of missing
dependencies.
Thanks to Xavier Chantry <shiningxc@gmail.com> for finding this
solution.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Fixes FS#16871 and makes the pkgdesc workaround obsolete.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Thanks to Laszlo Papp <djszapi@archlinux.us> for the following catch:
opendir(path)) == (DIR *)-1;
is maybe the result of misunderstanding the manpage. If an opendir() call
isn't successful it returns NULL rather than '(DIR *)-1'.
Noticed-by: Laszlo Papp <djszapi@archlinux.us>
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently makepkg takes the commandline arguments, assigns them to a
variable and passes that variable to the next makepkg call (within
fakeroot).
Use a comination of quotes and arrays in this process to ensure any
arguments passed within quotes and containing spaces stay as a single
argument during the second makepkg call.
Thanks to Dan for figuring out how to get this working.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
alpm_pkg_get_name() gives us little benefit in backend code besides a NULL
check on the package passed in; we could do that ourself if necessary. By
changing to direct references in the cases where we are sure we have a valid
package, we save a function call each time we need a package name. This
function can't be inlined because it is externally accessible.
This cuts the calls to get_name() from 1.3 million times in a
pacman -Qu operation to around 2400.
Signed-off-by: Dan McGee <dan@archlinux.org>
In doing so, it is possible to get rid of all the tests for colored
messages except for one global one.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
pkgbase is used in the following rm calls, and since pkgname can be
present when pkgbase is not, it is safer to check for pkgbase.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
