This implies following changes:
* contrib scripts can be built and installed easily by running make(1)
in "contrib/". This removes the need to pick all contrib scripts
manually when packaging pacman-contrib.
* contrib scripts will no longer be built when running make(1) in the
top level source directory. This seems like the most natural approach.
We install those separately and should act the same when building
stuff.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
This eliminates the need for strtrim() usage completely, instead relying
on the fact that the only allowed delimiter between key and value is the
" = " string.
Signed-off-by: Dan McGee <dan@archlinux.org>
Extract the actual unlinking of files into a new method, which
eliminates a goto used for flow control. Also fix up a few small issues
in the code:
* Unnecessary (unsigned long) cast, use '%zd' instead
* Total up errors returned from unlink_file calls and return to caller
* Be consistent with scriptlets- we run pre_remove on dbonly, so we
should also run post_remove. Both can be disabled by way of the
--noscriptlet argument.
* Don't pass an invalid pointer to oldpkg to the event callbacks;
instead call the callback before we free the object.
Signed-off-by: Dan McGee <dan@archlinux.org>
Instead of returning the same value as the parameter to this function,
return the length of the string, which can be useful to the caller when
its non-zero (e.g. to find the end of the string).
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Pacman assumes that the final character of a line specifing a repo
in pacman.conf is a "]". But it did not clean whitespace from the
line after removing any comments. So lines like:
[allanbrokeit] # could break system
caused pacman not to recognize the repo. Adjust config parsing to
strip comments before trimming whitespace from the end of the string.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Used in alpm_compute_md5sum() and alpm_compute_sha256sum().
Signed-off-by: Diogo Sousa <diogogsousa@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Ensures that config.h is always ordered correctly (first) in the
includes. Also means that new source files get this for free without
having to remember to add it.
We opt for -imacros over -include as its more portable, and the
added constraint by -imacros doesn't bother us for config.h.
This also touches the HACKING file to remove the explicit mention of
config.h as part of the includes.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Mostly a waste of time. Sure, we no longer make sure your pacman
database partition has enough space, but if you are using this option
you better know what you are doing anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
It is quite easy to hoist this potentially repeated computation out of
the loop; even if we don't end up using it, it is super cheap to do it
only once.
Signed-off-by: Dan McGee <dan@archlinux.org>
The return should probably be checked to ensure its not longer than
PATH_MAX, but I have no idea what the correct behavior is when that
happens.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
If CDPATH is set, this could possibly write to stdout.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
As per HACKING file, we use 'CTRL(' rather than 'CTRL ('
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
pacsysclean sort installed packages by decreasing installed size. It's
useful for finding large unused package when doing system clean-up. This
script is an improved version of other similar scripts posted on the
forums. Thanks goes to Dan for fixing and improving my original script.
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Allows renamed .asc/.sig files to be still discovered by makepkg. This
is needed for a package such as PuTTY, which provides abnormally named
sig files (.DSA and .RSA) which are valid input for gpg --verify.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
If someone specifies a bogus line such as
pacman -S baz adsf/boo base-devel
we are better off trying to process all targets and showing all relevant
errors before exiting. This is easier in -U and -R operations where we
aren't dealing with groups, but here we attempt to skip group selection
once we know a target has errored to avoid cluttering the output and
hiding the real problem.
Signed-off-by: Dan McGee <dan@archlinux.org>
If an early target fails, we stopped processing the rest of the list. We
should continue all the way through and show relevant errors for each
target if possible, and error out only at the end.
We do process all targets to check for URLs first and will error out if
some could not be processed; we then do a second loop and try to load
each target specified on the command line.
This mirrors a patch by Allan to do the same for removal operations.
Signed-off-by: Dan McGee <dan@archlinux.org>
On a removal operation, pacman currently reports an error for the
package that is not found in the database and then exists. Adjust
so that all unknown packages are reported.
Before:
> pacman -R foo bar
error: 'foo': target not found
After:
> pacman -R foo bar
error: 'foo': target not found
error: 'bar': target not found
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This converts our script generation to use the built-in AM_V_GEN macro,
which honors the V= setting passed to make and allows one to see the
full command if they truly desire. The AM_V_at macro is also used in
place of an explicit @ so verbose-mode compiles show all commands being
run.
We can also use these two macros in doc generation to quiet it down to
the level we expect.
Other minor changes:
* a pointless test call is removed in test/pacman/tests/
* sed is used instead of dos2unix as we depend on it anyway
* consecutive chmod calls are reduced to a single call (e.g., '+x,a-x')
Signed-off-by: Dan McGee <dan@archlinux.org>
Since we know the length of the line, we can use this all the way
through and do a cheaper operation than strdup() by just invoking malloc
and memcpy directly.
Signed-off-by: Dan McGee <dan@archlinux.org>
Be more semantically accurate and avoid accidental overwriting of some
configuration variables that are considered to be constant.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add a read-only variable "$myname" to every contrib script and hardcode
program names instead of relying on "$0". The variable name "$myname"
was chosen because it is already used in pacman and because we use
"$myver" to specify the program version in the official scripts.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is awesome, and I don't know why we haven't already done this. It
gives us the much more less verbose make output in a few different ways:
* If you run `make V=0`, you will get the quiet output.
* If you run `./configure --enable-silent-rules`, the quiet output is
the default; verbose output can be had by passing V=1 to make.
make[3]: Entering directory `/home/dmcgee/projects/pacman/lib/libalpm'
CC add.lo
CC be_local.lo
CC be_package.lo
CC be_sync.lo
CC delta.lo
.....
Signed-off-by: Dan McGee <dan@archlinux.org>
We were using the size of a pointer, not the size of the whole
archive_read_buffer struct. Thanks to Clang/LLVM 3.0 and Allan/Dave in
IRC for finding this one.
Signed-off-by: Dan McGee <dan@archlinux.org>
This prevents user error in adding a file generated via `gpg --sign`
rather than `--detach-sign`, for example. The same 16KiB limit is used
we use in our pacman download code.
The section is moved above the checksum generation to avoid presenting
info messages to the user if the signature isn't valid.
Addresses a shortcoming pointed out in FS#27453.
Signed-off-by: Dan McGee <dan@archlinux.org>
We had a 16 KiB limit on database signatures, we should do the same here
too to have a slight sanity check, even if we can't do so for the
package itself yet.
Signed-off-by: Dan McGee <dan@archlinux.org>
Be consistent with all other contrib scripts and support the "--help"
command line switch. Fixes FS#27258.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
Whereas comm will check inputs to see if they're sorted (and warn when
they aren't), grep doesn't even care about ordering. In this particular
instance -- neither do we. We're only interested that the two lists are
equivalent.
Fixes FS#26580.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Both currently marked as failing.
* sync303.py encapsulates the broken behavior reported in FS#27214.
* sync304.py shows how packages depending on a specific version of a
package in SyncFirst can cause breakage of the dependency resolver.
Signed-off-by: Dan McGee <dan@archlinux.org>
We do this in several of the package duplication steps; add a helper
function for doing so to reduce some of the repetitive code.
Also add a free_deplist function for our repeated depend list free calls
of both the data and the list.
Signed-off-by: Dan McGee <dan@archlinux.org>
Made existing documentation more consistent and added
documentation where there was none. One function still
needs documentation and is marked with 'TODO'.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
