Supported by libarchive as of version 3.1.0 when compiled against lzo2
or in the presence of the lzop binary.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
In makepkg, passing -sr --needed causes there to be a conflict when
pacman goes to remove the dependencies, as the --needed flag is not an
option for pacman -R. This patch makes --needed not get added to the
PACMAN_OPTS array, but it acts like ASDEPS, and is only added to an
install function.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
The idea of having separate build() and package() functions is that
build() is run as a normal uses and package() as (fake)root. Any
files placed in $pkgdir during build() can have the wrong permissions.
Restrict access to $pkgdir during build() - unless there is no package()
function.
Also, set $pkgdir to something "useful" during build(). For split
packages, this uses "<path>/pkg/$pkgbase" because it is not obvious
which $pkgdir is being referred to.
Signed-off-by: Allan McRae <allan@archlinux.org>
Rearrange tidy_install so we first remove docs, unwanted files,
libtool files, and empty directories. Then check for missing backup
files and references to $srcdir and $pkgdir. Finally compress manpages,
strip debug symbols, and compress executables with upx.
Fixes FS33318
Signed-off-by: Chirantan Ekbote <chirantan.ekbote@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
The difference between the echo and the printf's in write_pkginfo seemed
to be somewhat sporadic. Also, the INFAKEROOT check was doing the same
exact thing as the SPLITPKG check, but formatted much differently and
consuming two extra lines. I think this makes it more readable than it
was previously, if nothing else.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Packages are already in the pkg db were given a warning, and then
readded anyway. With -n specified, the warning is printed, but skips
readding it.
Signed-off-by: Danny George <dangets@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
When building sources with a pkgver function, makepkg will print out the
original version before pkgver() is run, claiming that that is the
package that will be built. This patch simply re-prints the output
later, after pkgver() has been run so people can see which package they
are actually building.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Amazingly, using "sleep 1" to convince btrfs to report correct file
sizes is only a 90% fix. Sometimes more sleep is needed.
Instead we use the --apparent-size argument to du to get actual file
sizes. This is used only on Linux as the various BSDs do not support
this argument.
Signed-off-by: Allan McRae <allan@archlinux.org>
Fun fact about bash: the below is valid and will only ever print 'a'!
fn() {
continue 2
}
for x in {1..5}; do
for y in {a..e}; do
echo "$y"
fn
done
done
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Add an mtree file to the package with all file information. This
can be added to the local pacman database on install allowing full
package verification.
Signed-off-by: Allan McRae <allan@archlinux.org>
Places logs in a pre-defined location. The logs are always neatly
labeled with package names and numbers, and this way can be more easily
sent to network shares as they are written or compressed/cleaned en
masse.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Specifically, we shouldn't allow newlines in the pkgdesc field, as
pacman will ignore the continuation and end the description prematurely
as written to the local DB. Normalize ALL whitespace, replacing it with
single whitespace characters.
Fixes strange errors as seen by FS#32852.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Instead of blindly consuming data from the .PKGINFO file, parse it more
closely and only declare variables as needed.
Should help to avoid nonsensical errors and possibly dangerous command
execution as seen in FS#32852.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Although it should be currently quite obvious what package is being
created when "Creating package..." is printed, it will not be in the
future when a debug package is potentially created too. Also, given
$pkgname is always correctly set when split packaging now, we no
longer need to pass that around.
Signed-off-by: Allan McRae <allan@archlinux.org>
When using the "debug" option in combination with "strip", move the
debugging symbols into a separate directory ($pkgdir-debug/usr/lib/debug)
suitable for creating a package from.
Create hardlinks between debugging symbols of hardlinked files and add
symlinks in the .build_id directory if the binary has a build ID.
Signed-off-by: Allan McRae <allan@archlinux.org>
Unify split and single packages to always use a folder within pkg/
as thier $pkgdir. This will allow a folder for storing a package with
stripped debug symbols to be added within pkg/ too.
Signed-off-by: Allan McRae <allan@archlinux.org>
Move stripping of files to a spearate function that will be expanded
for the handling of creating debug symbol packages.
Signed-off-by: Allan McRae <allan@archlinux.org>
Add a "debug" option that appends the compiler flags specified in the
variables DEBUG_CFLAGS and DEBUG_CXXFLAGS in makepkg.conf to their
counterpart buildflags.
Signed-off-by: Allan McRae <allan@archlinux.org>
When using "makepkg -R" without a packge function, we should still
run tidy_install as the user might have added other packaging options
such as (e.g.) '!emptydir' to remove empty directories on repackaging.
Of course we can not revert some options when repackaging without a
package function.
Signed-off-by: Allan McRae <allan@archlinux.org>
Simply add the option to pass the --needed flag to pacman when using -i
with makepkg. When using makepkg in scripts, particularly for git
packages with the new version functions and not just a date, this can
save disk io and time instead of reinstalling.
This would mostly be useful with the --noconfirm option.
Signed-off-by: wgiokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Most of makepkg already uses sentence case. This cleans up the last few
stragglers.
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
After we install dependencies, we source /etc/profile so that new
elements get added to the path. As this can override any local setting
of PATH, we store the full path of the PACMAN variable passed to makepkg.
Also, add a check for PACMAN availability if it is needed to deal with any
dependency operations.
Reported-by: Martin Panter <vadmium à gmail·com>
Signed-off-by: Allan McRae <allan@archlinux.org>
This resolves an inconsistency with how the $PACMAN variable was interpreted.
Previously “makepkg” would extract the first word from the $PACMAN variable
and check that it existed as a command. This appears to have been happening
ever since the variable was implemented in revision 66c6d28 (makepkg: allow
to specify an alternative pacman command). Thus it looks like command
arguments were originally allowed in the variable.
However the run_pacman() function now quotes $PACMAN, so the whole variable
has to be just the command name. This quoting was introduced more recently,
perhaps in revision 622326b (makepkg: fix sudo/su calling of pacman).
Signed-off-by: Allan McRae <allan@archlinux.org>
The package() function has been around since pacman-3.3 and has
significant advantages including limited fakeroot usage and correct
repackaging. The ability to use PKGBUILDs without a package function
will be removed in a future release.
Signed-off-by: Allan McRae <allan@archlinux.org>
There are valid reasons for a source files PGP signature to be changed
(expired key, expired signature, additional person signing...). Thus
providing a checksum for signature files can potentially cause a
PKGBUILD to require unnecessary updating.
Avoid this issue by using "SKIP" for the signature checksum.
Fixes FS#31590.
Signed-off-by: Allan McRae <allan@archlinux.org>
Using the last match in the BUILDENV and OPTIONS arrays allows the
user to easily override these values without specifying the entire
array. For example add "BUILDENV+=(sign)" in ~/.makepkg.conf.
Fixes FS#26701.
Signed-off-by: Allan McRae <allan@archlinux.org>
The list of which download protocol should look in makepkg.conf for the
download agent was hard coded into makepkg. Instead, fallback to checking
the the download agents array for any non-local or (implemented) vcs
source.
Signed-off-by: Allan McRae <allan@archlinux.org>
* For any vcs other that git, the fall through resulted in being handled by the
code for std url, hence fragments were being left on.
* Handle vcs urls than end in a slash correctly, eg http://example.com/project/
Signed-off-by: Gary van der Merwe <garyvdm@gmail.com>
Before this patch, makepkg does not check if $dir is a local clone of
the right repo.
For example, git fetch would be run even if $dir is not a local
bare clone of a git repo in present in source(), but a subdir of
a checked-out one. That means makepkg can potentially fetch from
a completely unrelated remote and update completely unrelated
dirs/files.
This patch adds a check to make sure we are fetching from the right
remote.
Signed-off-by: Mohammad Alsaleh <msal@i2pmail.org>
Before this patch, makepkg would only check if $dir exists as an
indication that a local clone exists. And if $dir does exist, makepkg
will run git fetch inside it unconditionally.
After applying this patch, makepkg will check if the existent $dir is
empty. And if it is, it will be used to store a local clone.
Signed-off-by: Mohammad Alsaleh <msal@i2pmail.org>
Three warnings after someone deliberately typed --noextract is a
tad excessive... Also, an empty $srcdir is perfectly valid when
the source array is empty, although using --noextact then is
wasteful.
Signed-off-by: Allan McRae <allan@archlinux.org>
Rather than calling upon ls for this, use a proper shell function which
uses globbing to determine the existance of files in a directory.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Somewhere in the arg parse refactoring, the args array went away and we
simply stashed our remaining parameters as positionals. Fix this up so
that pkgdelta doesn't mysteriously hang in read_pkginfo().
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
