Problems due to concurrent running instances of pacman can be difficult
to diagnose. Log a warning to make it more obvious that that's what
happened, that it's a bad idea, and hopefully encourage people who do
things like removing the lock file to run pacman from an install script
to at least be courteous enough to put it back when they're done.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Rather than have individual callers log failure, just
do it directly in _alpm_handle_unlock.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
CHECK_ERR checks gpg_err which is a local variable. Calling
gpg_op_import_result cannot modify it.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Ignored packages are from the transaction remove list which consists of
duplicated packages so a direct pointer comparison is not appropriate.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Consolidates repeated code and replaces dangerous
strdup calls with STRDUP.
Also fix a couple variables named "pkg" that
refer to file paths.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Since 017184fa, alpm_sync_sysupgrade will not add both a replacement and
a literal upgrade to the transaction.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Prevents the need to modify paths, removing strndup as an unchecked
point of failure, and lengths only need to be calculated if the paths
match.
Also removed an old comment regarding directory/symlink compatibility.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Much like with events, instead of using a bunch of void* arguments for
all questions, we now send one pointer to an alpm_question_t union.
This contains the type of question that was triggered.
With this information, a question-specific struct can be accessed in
order to get additional arguments.
Signed-off-by: Olivier Brunel <jjk@jjacky.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Because for the new question types, we'll need to use alpm_errno_t let's
move its definition up.
Of course to do so, we also need to move that of alpm_handle_t as well, so move
all opaque structures on top.
Signed-off-by: Olivier Brunel <jjk@jjacky.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Use of this flag causes connections to be closed on 404s -- a common
occurrence when your config sets DatabaseOptional. Handle the error
gracefully, so that the connection can be reused.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
alpm downloads databases based on basename causing [foo] and [bar/foo]
to silently overwrite each other.
Also remove an extra tab
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Provide pkgbase information for non-split packages with pkgbase set.
Also record the version of the "base" package. This is useful for
matching package files to source packages.
Signed-off-by: Allan McRae <allan@archlinux.org>
Use MALLOC instead of malloc for safety in libalpm. Some changes are pure
refactoring, but for others this provides a success check for memory
allocation.
Signed-off-by: Allan McRae <allan@archlinux.org>
ALPM still adds a warning to the log, but doesn't emit an event about
said warning, instead using a specific event to let the frontend what
happened/how to inform the user.
Note that there are 2 cases for installing a .pacnew file, to not
overwrite user changes and because file is in NoUpgrade. In the later case
the warning was a bit different: it happened before and said "extracting"
instead of "installed." Now both happen after and are phrased the same.
Signed-off-by: Olivier Brunel <jjk@jjacky.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
This moves the "wrong args" error up from trans_commit to add_pkg when
used with a local pkg and adds the error for remove_pkg when used with
a sync pkg, which currently just removes the db entry.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
These will be emmitted when download a package file from a repository,
indicating that the download starts, and whether it was successfull or
not.
Note that when multiple servers are available, no event is emmitted when
switching to another server.
(This doesn't apply to alpm_fetch_pkgurl(), but since it is called by
the frontend, it shouldn't have problems knowing when the download
starts and when it ends.)
Signed-off-by: Olivier Brunel <jjk@jjacky.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
To go along with RETRIEVE_START, one other event will be emmitted once
the downloads are done: RETRIEVE_DONE if all files were successfully
downloaded, else RETRIEVE_FAILED.
Signed-off-by: Olivier Brunel <jjk@jjacky.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
When ALPM emits a log message, it still goes through _alpm_log() but
instead of calling a specific log callback, it goes as an event.
Signed-off-by: Olivier Brunel <jjk@jjacky.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Instead of using two void* arguments for all events, we now send one
pointer to an alpm_event_t struct. This contains the type of event that
was triggered.
With this information, the pointer can then be typecasted to the
event-specific struct in order to get additional arguments.
Signed-off-by: Olivier Brunel <jjk@jjacky.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
This greatly speeds up file list generation times by avoiding
uncompressing the whole package.
pacman -S base with a deliberate file conflict:
before: 9.1 seconds
after: 2.2 seconds
Signed-off-by: Florian Pritz <bluewind@xinu.at>
If the user opted not to remove the unresolvable packages from the
transaction, the list was neither free'd nor saved to the transaction to
be free'd in trans_release.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Front-ends should be able to free memory that alpm hands them.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
FS#34240. This is useful for translators and has little cost to us since
we moved to transifex for translations.
Signed-off-by: Allan McRae <allan@archlinux.org>
_alpm_resolvedeps resets pm_errno to 0 by calling alpm_checkdeps.
Whenever the last call succeeded, pm_errno was not properly set,
preventing pacman from properly handling the error and leaking
additional memory. We know pm_errno should be ALPM_ERR_UNSATISFIED_DEPS
if resolvedeps has failed, so just set it manually.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
If the db directory did not exist when local_db_populate was called, the
pkgcache wouldn't be initialized, causing pkghash_add_pkg to fail.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Forcing vim users to view files with a tabstop of 2 seems really
unnecessary when noet is set. I find it much easier to read code with
ts=4 and I dislike having to override the modeline by hand.
Command run:
find . -type f -exec sed -i '/vim.* noet/s# ts=2 sw=2##' {} +
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Allan McRae <allan@archlinux.org>
Because this event is triggered when an optdepend for another package is
being removed.
Signed-off-by: Olivier Brunel <jjk@jjacky.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
We only care that packages are being installed from a repo, not how
many.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Commit e47eb9a7 commented out base64_encode, which left base64_enc_map
unused, causing warnings under clang.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
It's a boolean, so signedness doesn't matter, and the public API already
exposes it as an int through alpm_pkg_has_scriptlet().
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
The alpm_decode_signature function was made available for frontends to
display signature information, but this required libalpm to be build with
gpgme support. As that function did not require anything from gpgme,
have it build unconditionally.
Signed-off-by: Allan McRae <allan@archlinux.org>
This shrinks down the total size of the package struct by a handful of
bytes, saving us some memory and cache pressure when we are loading up
the entirety of the sync and local databases.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
When calling open(), use O_CLOEXEC as much as possible to ensure the
file descriptor is closed when and if a process using libalpm forks.
For most of these cases, and especially in utility functions, the file
descriptor is opened and closed in the same function, so we don't have
too much to worry about. However, for things like the log file and
database lock file, we should ensure descriptors aren't left hanging
around for children to touch.
This patch is inspired by the problem in FS#36161, where an open file
descriptor to the current working directory prevents chroot() from
working on FreeBSD. We don't need this file descriptor in the child
process, so open it (and now several others) with O_CLOEXEC.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
