Currently makepkg clears the whole $pkgbasedir which is needless. Moreover,
in the obscure case of multiple makepkg runs (with different $pkgname) that
share a $pkgdirbase, only $pkgdir's from the last run will remain. Since
I consider the contents of $pkgdir an important artifact, this commit restricts
the deletion to individual $pkgdir's.
When CLEANUP is set, the behavior is unchanged.
Discussed in:
https://lists.archlinux.org/pipermail/pacman-dev/2015-February/019939.html
Signed-off-by: Allan McRae <allan@archlinux.org>
makepkg --packagelist prints the name of each package that would
normally be produced, minus $PKGEXT, and exits.
Implements FS#42150
Signed-off-by: Ivy Foster <joyfulgirl@archlinux.us>
Signed-off-by: Allan McRae <allan@archlinux.org>
We use the get_pkg_arch function with the package name parameter in two places:
1) checking if the package is already built
2) installing build packages
Currently this failed when a package override for "arch" was an array, despite
all our documentation stating that it is indeed an array. This change makes
these two places fail if there is package override for arch that is not an
array - i.e. of the form arch='i686'.
Signed-off-by: Ivy Foster <joyfulgirl@archlinux.us>
Signed-off-by: Allan McRae <allan@archlinux.org>
There was some manual check to know if the local repository was really a clone
of the one specified in PKGBUILD. This check has been removed because it is
buggy and not necessary.
It is buggy because this check needs to be semantic, not a simple string
comparison. For example, I was blocked from building a PKGBUILD because Bazaar
was returning two different strings for the same location (for HTTP one was
url-encoded while the other was not, and for local paths one was absolute while
the other was relative). While this may be a bug in Bazaar, the check is
unreliable since the comparison is not semantic (http://foo.com/%2Bplus and
http://foo.com/+plus obviously refer to the same location for example).
Specially, it is useless because the intention is updating the existing local
clone. However, if the local clone is not a real clone of the repository
specified in PKGBUILD (which was what this buggy check tried to tell), next step
which is a pull operation will fail anyway. This is because bzr pull does not
perform merges, it just makes one branch into a mirror of another.
There was a reason provided when this manual check was added for Git, but no
reason provided for copying such check when Bazaar support was added, see
commits below. In fact, Mercurial lacks such manual check.
* c926c39b04
* 3b02f80dcb
Fixes FS#43448.
Signed-off-by: Allan McRae <allan@archlinux.org>
This performs all the needed work for libmakepkg to be included in
tarballs, installed into the correct place, and read into makepkg.
Also change the install root for libmakepkg to an architecture independant
location.
Signed-off-by: Allan McRae <allan@archlinux.org>
This can decrease package size by optimizing PNG image size. Images are
just stored with better compression and/or filter options. The actual
image content is not altered.
Additionally this can automatically fix broken PNG images which caused
some trouble lately.
Signed-off-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Allan McRae <allan@archlinux.org>
Commit 9e5e86aa was supposed to fix this. Instead I picked another [[ -f ]]
statement in the same region and added the hardlink test to it instead, thus
not fixing the bug.
Signed-off-by: Allan McRae <allan@archlinux.org>
This fixes the issue where if the user explicitly set the name of the cloned source
to eg. foo.git, the directory name in $SRCDEST would be foo.git as expected, but the
clone in $srcdir would be stripped of the .git suffix.
Signed-off-by: Lukáš Jirkovský <l.jirkovsky@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
If an already used array is passed array_build, some entries from the old
array could be carried over if the old array was longer than the new one.
Clear the destination array before adding elements to it to prevent this
issue.
Fixes: https://bugs.archlinux.org/task/43387
Signed-off-by: Allan McRae <allan@archlinux.org>
I suspect this is just wrong -- you never need to quote the replacement
side of a PE. In bash 4.3, this is essentially a no-op, but because of
a bug in bash 4.2, we get embedded quotes as a result of this
replacement. The relevant changelog item in bash is:
Fixed a bug that caused single quotes that resulted from $'...' quoting
in the replacement portion of a double-quoted ${word/pat/rep} expansion
to be treated as quote characters.
But this doesn't apply to us. Let's just drop the excessive quoting...
Signed-off-by: Allan McRae <allan@archlinux.org>
When a shared library uses an absolute symlink for its its .so file, the check
if the shared version of a static library exists fails. Test for the presence
of a broken symlink too.
Signed-off-by: Allan McRae <allan@archlinux.org>
This bombs out when "$trusted" expands to the empty string. We're
better off passing the var by name and letting bash default to "0" when
the var is empty
Fixes: https://bugs.archlinux.org/task/43269
Signed-off-by: Allan McRae <allan@archlinux.org>
I don't see an easy fix to avoid printing this more than once, so let's
at least differentiate the messaging so that it's more clear what's
going on.
Signed-off-by: Allan McRae <allan@archlinux.org>
We fixed this up to check architecture specific sources in ec679e09b2,
but fudged the array name in the in_array call.
Signed-off-by: Allan McRae <allan@archlinux.org>
Previously, we used a single boolean value to determine correlation of
sources to checksums. Since the introduction of arch-specific sources,
this is no longer sufficient, as we must ensure that we have checksums
for (potentially) multiple source arrays.
This change inlines the logic of have_sources to build an associative
array of source array names, unsetting them as we discover their
checksums. The error condition then becomes a non-empty correlation
array.
Fixes: https://bugs.archlinux.org/task/43192
Signed-off-by: Allan McRae <allan@archlinux.org>
We validated all sources when making a source package, whether or not they
are included in the tarball.
Signed-off-by: Allan McRae <allan@archlinux.org>
Before this, we'd see bizzare behavior of:
-> Adding changelog file (systemd.install)...
And, changelog files in the global section would not be added at all.
The code is clearly wrong here, as it references 'install' within a
loop of 'changelog' and 'install'. Let's use parameter indirection to
ensure that the proper file is identified and added.
Signed-off-by: Allan McRae <allan@archlinux.org>
File in noextract should still be symlinked into $srcdir so that they
can be accessed without using $SRCDEST. Using noextract on VCS files
makes no sense as these are not being extracted, so now this does
nothing.
Signed-off-by: Allan McRae <allan@archlinux.org>
This matches the behaviour with non-VCS sources. It also allows incremental
builds when subversion is used to obtain sources.
Signed-off-by: Lukáš Jirkovský <l.jirkovsky@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
bzr does not recognize bare ssh:// urls.
Fixes FS#41811
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
The local changes are discarded when updating. This matches the behaviour
when non-VCS sources are used. It also allows incremental builds.
This also changes the checkout during bzr source "extraction" to a heavyweight
checkout so that pulling a specific revision does not alter the original
download.
Original-work-by: Lukáš Jirkovský <l.jirkovsky@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
The local changes are discarded when updating. This matches the behaviour
when non-VCS sources are used. It also allows incremental builds.
Signed-off-by: Lukáš Jirkovský <l.jirkovsky@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Previously the sources were dowloaded in HEAD revision in the download_svn().
If a specific revision was requested in fragment, the code was updated to that
revision in extract_svn(). However, because SVN is a centralized system,
this means that the changed sources has to be downloaded again.
By moving the fragment handling to download_svn(), we get the correct revision
without having to download it later in extract_svn().
Signed-off-by: Lukáš Jirkovský <l.jirkovsky@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
The local changes are discarded when updating. This matches the behaviour
when non-VCS sources are used. It also allows incremental builds.
Signed-off-by: Lukáš Jirkovský <l.jirkovsky@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Similar to .PKGINFO, .SRCINFO provides structured metadata from the
PKGBUILD to be included with source packages.
The format is structured such that it contains a "pkgbase" and one to
many "pkgname" sections. Each "pkgname" section represents an "output
package", and inherits all of the attributes of the "pkgbase" section,
and then can define their own additive fields.
For example, a simple PKGBUILD:
pkgbase=ponies
pkgname=('applejack' 'pinkiepie')
pkgver=1.2.3
pkgrel=1
arch=('x86_64' 'i686')
depends=('friendship' 'magic')
build() { ...; }
package_applejack() {
provides=('courage')
...;
}
package_pinkiepie() {
provides=('laughter')
...;
}
Would yield the following .SRCINFO file:
pkgbase = ponies
pkgdesc = friendship is magic
pkgver = 1.2.3
pkgrel = 1
arch = x86_64
arch = i686
depends = friendship
depends = magic
pkgname = applejack
provides = courage
pkgname = pinkiepie
provides = laughter
The code to generate this new file is taken a project which I've been
incubating[0] under the guise of 'mkaurball', which creates .AURINFO
files for the AUR. AURINFO is the exactly same file as .SRCINFO, but
named as such to make it clear that this is specific to the AUR.
Because we're parsing shell in the packaging functions rather than
executing it, there *are* some limitations, but these only really crop
up in more "exotic" PKGBUILDs. Smoketesting[1] for accuracy in the Arch
repos yields 100% accuracy for [core] and [extra]. [community] clocks in
at ~98% accuracy (.3% difference per PKGBUILD), largely due to silly
haskell packages calling pacman from inside the PKGBUILD to determine
dependencies. [multilib] currently shows about 92% accuracy -- a
statistic which can be largely improved by utilizing the recently merged
arch-specific attribute work. This is also a smaller repo so the numbers
are somewhat inflated. In reality, this is only a .8% variance per
PKGBUILD.
Together, we can make PKGBUILD better.
[0] https://github.com/falconindy/pkgbuild-introspection
[1] https://github.com/falconindy/pkgbuild-introspection/blob/master/test/smoketest
Signed-off-by: Allan McRae <allan@archlinux.org>
