Packages and DBs now support using the UNIX epoch (seconds since Jan 1, 1970)
for use in builddate and installdate. This will only affect newly built
packages. Old existing packages with the text format are still supported, but
this is deprecated.
In the case of removal of text time support, this code will fail gracefully,
returning the start of the epoch for broken packages.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
In most cases, we want to fully scan a package when we load it, which serves
as a integrity verification check. However, there are times when it is only
desired to read the metadata and nothing else, so allow the caller of pkg_load
to choose the behavior they need.
This pays big dividends in speeding up pacman cache cleaning functionality.
Old (729 packages):
real 1m43.717s
user 1m20.785s
sys 0m2.993s
New (729 packages):
real 0m25.607s
user 0m19.389s
sys 0m0.543s
Signed-off-by: Dan McGee <dan@archlinux.org>
Previously, package names must match a specified scheme or they will cause
pacman add operations to fail. This is not a very intelligent or necessary
way to act, so remove the dependency on the name of the package to be
installed and read all relevant information from the metadata instead.
This does have one causality to be addressed later- pacman cache cleaning
functionality, which has never been phenomenal, just lost most capability.
Signed-off-by: Dan McGee <dan@archlinux.org>
As seen with the recent upgrade of pacman and the removal of the
pacman.d/current mirrorlist, files that were formerly in the backup array
get deleted upon their removal, which could be dangerous. Instead, we should
use the combined backup array of the old and new package. This fix should
address this issue in a relatively straightforward way.
In addition, old files should be moved to pacsave locations as expected.
Signed-off-by: Dan McGee <dan@archlinux.org>
The mistake fixed in commit 26441cf65c
was actually done at two places.
This fix the second one.
Also remove one unnecessary newline introduced by
commit d34b2c4ed8
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
My two previous hacks related to this part
(8038190c7c and
b15a5194d1) were caused by the lack of
understanding of a feature introduced a while ago:
Better control over CTRL-C interruptions -- do not leave the DB in an
inconsistent state (54008798ef).
Now I have been looking at this commit, and the added feature is indeed
interesting. The main problem I had with it is that it does a rather
unusual use of alpm_trans_release, which caused a few problems that I tried
to fix in a weird way. I think these problems were caused by the fact that
there weren't any difference between "interrupt transaction" and "release a
transaction which failed" actions from the alpm_trans_release POV. So I
decided to add a new function instead, alpm_trans_interrupt, which is
called on Ctrl+C, and which only sets trans->state to STATE_INTERRUPTED so
that remove_commit and add_commit can exit cleanly at a safe moment. This
allowed me to revert my two previous hacks as well.
Also ensure we handle SIGINT correctly in all cases- if a transaction is
not ongoing, then we can free the transaction and exit quickly.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows us to remove the hack in the frontend where we added a newline
to everything coming out of the pm_printf functions, and instead let the
developer put newlines where they want them. This should be the last hangover
of that auto-newline stuff.
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch cleans up and fix the _alpm_trans_update_depends function
and ensure that all requiredby fields are filled in case of multiple satisfiers
(previously, the handling of mutliple satisfiers in that function was inconsistent).
This makes a special case handling of requiredby in commit_single_pkg() obsolete,
and so allows cleaning that code as well.
Also fixed upgrade056 pactest because :
1) the requiredby fields were wrong, and this wouldn't happen with the fixed _alpm_trans_update_depends().
2) this is a very unusual case anyway (and handling all corner cases combined to a broken database
seems nearly impossible to achieve).
References :
http://www.archlinux.org/pipermail/pacman-dev/2007-July/008919.htmlhttp://www.archlinux.org/pipermail/pacman-dev/2007-July/008920.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
* Move alpm md5 functions to lib/libalpm/util.c
* Remove unneeded includes for md5.h
* Replace md5 implementation with one from http://www.xyssl.org
Dan: clean up XySSL code by removing parts we don't use, and add a note
saying what changed.
Dan: fix alpm_get_md5sum, off by one error on the malloc call and other
small things.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
There's no need for a second hashing algorithm. MD5 serves the purpose
of verifying that a package file hasn't been corrupted during download.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
We were using a void *data element in pmpkg_t before, which is unsafe by its
nature of being untyped. Reimplement data as origin_data being a union that
can hold either a path to a package file or a pointer to a cache database,
and make the other necesary updates in the code to reflect this. See package.h
for details.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a full refactoring of _alpm_add_commit into multiple functions and a
better layout for later. Some highlights:
* No regressions in pactest performance.
* Much cleaner layout. add_commit is split into four functions:
upgrade_remove, extract_single_file, commit_single_pkg, _alpm_add_commit
* No more super-functions, the heaviest (extract_single_file) is finally
under 400 lines, with much improved commenting as well.
* Incorporation of Andrew Fyfe's ideas for fixing FS #7484. Try to handle
all possible cases of extraction combinations with files, symlinks, dirs,
and non-existant entries on the filesystem. This should make our dealings
with libarchive fall more into our control.
Signed-off-by: Dan McGee <dan@archlinux.org>
This replaces the former -D operation that was undocumented and rather
hacky. It can be used with add, upgrade, or sync transactions and will affect
all packages installed. Should close FS #7193.
Also tell makepkg to use this new flag.
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes the failure of the requiredby004 pactest in a not so pretty way,
but it gets the job done. I purposely used the extremely long name of
PM_TRANS_TYPE_REMOVEUPGRADE to be both clear and in the hope that someone
else will figure out a better solution.
Original idea from Nagy Gabor, patch updated and cleaned for current code.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove versioncmp.c by moving all functions to locations that make sense.
Move replacement functions (for building without glibc) into util.c where
they belong, and do proper checks for them instead of using __sun__, etc.
Signed-off-by: Dan McGee <dan@archlinux.org>
There is no real reason to burden our translators with these messages, as
anyone helping to debug these will probably want them in English.
Signed-off-by: Dan McGee <dan@archlinux.org>
We shouldn't translate log messages to pacman.log so it is consistant and
can be parsed by other tools. Remove all gettext _() around these strings.
Signed-off-by: Dan McGee <dan@archlinux.org>
I ran flawfinder and sparse over the pacman source code and found a few
things that were worth fixing (and were quick fixes).
Signed-off-by: Dan McGee <dan@archlinux.org>
Adds the ARCHIVE_EXTRACT_NO_OVERWRITE libarchive flags
for extracting files and directories.
This will prevent symlinks for being overwritten by directories.
All other files that need to be extracted should already have
been deleted previously by pacman.
This flag is not used for extracting files in backup array
to /tmp/alpm_XXXX, because this file is created by mkstemp first,
and so needs to be overwritten by the file from the archive.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
With libarchive 2.2.3 (previously 1.3.1), archive_read_extract now returns ARCHIVE_WARN
when a package is extracted as user, because for example, UID=0 or SUID bit can't be set.
This patch makes pacman not treating these warnings as errors anymore,
but simply ignoring them.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
For future possibilities, don't extract any files that start with '.'.
This will allow us to add features such as the ChangeLog viewing without
having to wait to include these files in packages, because older versions
of pacman will be forward compatable with 'hidden' files at the root level
of the package.
Signed-off-by: Dan McGee <dan@archlinux.org>
This was a bad way to fix a problem upstream. Doing this resulted in
symlink permissions being applied to files installed on the system, leaving
some binaries with 77 permission, etc.
This reverts commit 4e6b7c1cde.
Add some 'const' keywords all over the code to make it a bit more strict on
what you can and can't do with data. This is especially important when we
return pointers to the pacman frontend- ideally this would always be
untouchable data.
Signed-off-by: Dan McGee <dan@archlinux.org>
This code depends on /etc/mtab existance, which is not very reliable in all
cases, especially in a chroot or non-Linux environment. Dump it for now
until we can find a better way.
Signed-off-by: Dan McGee <dan@archlinux.org>
Hackish fix to ensure libarchive extracts files and dirs with the right
permissions. For some reason extracting /tmp on install wasn't handled properly
by librachive, so an explicit chmod will fix this.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
* Remove some unnecessary conditional compiling in util.h- move the
functions tha required it to trans.c (along with a bunch of new header
includes).
* Clean up util.h a bit- remove some header includes, remove universal
libarchive include and only put it in the files that need it.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove inclusion of libintl.h from all files, because we can do it once
in util.c where the _() macro is defined.
Signed-off-by: Dan McGee <dan@archlinux.org>
the alpm strcmp operation which takes void* references.
* We had this great visibility patch, but never actually took advantage of
it. Added the right compile flag to make it work and added some more
SYMEXPORTs where necessary to have a successful compile.
reordering and adding ones that were forgotten (noticed when trying to
compile after reordering).
* Updated the HACKING file to include information on #include usage.
* print -> vprint in "making dir" function in pactest.
specified
* Use db->path when appropriate
* Commented out the FAKEROOT checks in libalpm. This should never ever be done.
TODO test this quite a bit, as this will never cause the transactions to fail
if RW operations are requested... right now it is totally up to the front end
to decide when to fail
* Use realpath() to canonicalize the root path when specified, so
_alpm_makepath() doesn't freak out
* Fixed some output/indent of MDFile and SHAFile algorithms
* More efficient sprintf() usage in MDFile/SHAFile
* Added real error output to _alpm_makepath
* Moved entirely to alpm_pkg_get_* accessors, to read data on demand
* Mostly removed the INFRQ_ parameters from outside the be_files backend (making
the backend more extensible in the long run)
* packages created from _alpm_db_scan now have the db and origin set (making
accessors actually work for these packages)
* removed _alpm_db_ensure_pkgcache
* totally revamped the _alpm_checkconflicts function, making it cleaner and
easier to read (and thus fix in the long run) - maintainable code ftw
NOTE: feel free to rename the functions... I couldn't think of anything better
* removed an extra loop in sync.c:find_replacements - no sense in looping over
an entire DB while strcmp'ing the name, when we have get_pkgfromcache
Other:
* package struct "license" -> "licenses"
* Created _alpm_sync_find (duplicate code in some places, find_pkginsync
* Minor const correctness changes along the way
* fixed a couple extra '/' pathing issues (non-issues really)
* removed a duplicate pkg_cmp function
* Added some provision switching hackery. This could probably use some
refactoring,.. it solves the following case:
pkg1 and pkg2 provide 'foo' and are both installed
pkg3 depends on 'foo' and so lists 'pkg1' in the REQUIREDBY db section
pkg1 is upgraded and no longer provides 'foo'
** This code ensures that the REQUIREDBY of pkg3 is updated to require pkg2
now instead of pkg1
* Unified some functions names "package" -> "pkg" for consistency
* Removed the goofy 'faketarget' stuff used for dep testing
* Renamed alpm_pkg_isin -> alpm_pkg_find
* Renamed alpm_db_readpkg -> alpm_db_get_pkg
* Fixed a segfault in the conflict checking code
* Added an automatic failure in the case of -A/-U for a replacement of an
existing package. This requires a large amount of work and is postponed for
now. Example:
If ncmpc is installed, pacman -U /path/to/ncmpc-svn.pkg.tar.gz will fail
with and appropriate error message
from one package to another seemlessly (knock on wood). This is implemented
through the use of two skip lists in the trans struct- skip_add and
skip_remove, which replace the former trans->skiplist.
* Removed an unnecessary function parameter, added a necessary one.
* If a package has no backup files, print '(none)' under the heading so it is
more obvious.
* Updated my TODO list.
- the code should be clearer, more organized, commented, and have worthwhile
variable names now
- proactive backup=()s now work. That is, adding a file to a backup array
does what it should on the upgrade to that package, no longer forcing you to
wait a full upgrade cycle for it to take effect
* ldconfig was being run twice on an upgrade operation - fixed
* fixed another pm_fprintf/printf output corruption with the progress bars
* refactored some duplicate code for adjusting 'requiredby' lists
* Added config.rpath to .cvsignore
from the PKGINFO, and size is the stat() size of the archive
* Removed the useless 'output' param from package.c:parse_descfile
* Installation progress
- Call progress callback once at 0% for initialization
- 'needdisp' was useless
- alpm_list_count is called an excessive amount in these nested loops. Now we
only call it once per iteration
- Use the compressed sizes for PROGRESS calcs as uncompressed (isize) is not
exact (it is missing metadata sizes), and thus produces > 100% numbers
* The --debug params were goofy. New setup allows --debug without params,
--debug=<level> where level 1=debug output, 2=debug and download output,
3=debug, download, and function tracing output. This seems more sane to me.
* Removed PM_LOG_FLOW1 and PM_LOG_FLOW2. They were just confusing. When adding
new functions, it is near impossible to determin if your output should be
"flow1" or "flow2" without tracking all the way up the call chain. Rarely
would one ever say "ok, lets just show "flow2" output. These have both been
replaced with PM_LOG_DEBUG
* Removed the need for the root parameter on alpm_initialize. it is now
defaulted to PM_ROOT just like dbpath and cachedir. This allows alpm to be
initialized BEFORE option parsing in the front end, saving us some duplicate
variables in the frontend.
* Cleaned up front end variables due to early alpm_initialize call.
* Fix up add.c a bit better than it was in regards to FS #3492.
* Optimized the sqrt call in dependency cycle checking to a single call.
* Removal of an outdated comment.
* alpm_list_is_in --> alpm_list_find
* alpm_list_is_strin --> alpm_list_find_str
* Flip parameters of both functions to be inline with rest of alpm_list.
First commit, woohoo.
optimizations in order to make the code much more readable and
type-checkable. Every enum in the library now has it's own type that
should be used instead of the generic 'unsigned char'. In addition,
several #define statements dealing with constants were converted to
enums.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
* renamed pmlist_t -> alpm_list_t
* made alpm_list_t a public type (alpm_list.h header)
* removed additional storage for registered DBs in pacman source
* some code cleanup
* removed duplicate (pm)list_display functions from pacman source
* misc code cleanup
* Addition of hacky architecture check in the _splitname function
* Removal of libfetch from the archlinux proper - it has been renamed to
libdownload and can be found at http://phraktured.net/libdownload
* Merge of _some_ of the Frugalware makepkg change - this may still be
incomplete
* Removal of libftp from cvs proper
* PKGBUILD manpage now says 'PKGBUILD' instead of FrugalBuild (he he)
* Furthered the "lazy caching" to force the pkgcache to read nothing
(INFRQ_NONE) by default. Anything requiring package data should now check
the infolevel of each package and attempt to update it. This could be
ironed out a bit more later (by using the front-end get_info function
* Switched to libfetch. Drastic changes to the download code and the callback
progress bar functions. Also fixed the return value of
_alpm_downloadfiles_forreal. Downloading now supports http, ftp, https, and
files urls, along with 'mtime's and numerous other fancy features from
libfetch.
* Removed the PMList typedef, in favor of the same naming scheme other
structs use 'pmlist_t'
* Added a time stamp on debug output, to make it more informational
* Moved alpm_db_register to _alpm_db_register, making the public function
not take a callback parameter
