The current --skipinteg is a bit weird. It does not skip integrity
checks, but instead does them and prints a warning. Change this
behaviour to actually skipping the checks.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The presence of all install and changelog files (multiple files may
be used with package splitting) is checked for in check_sanity().
All install and changelog files are copied to the source location
when using --source. The check for install and changelog file presence
is removed in create_srcpackage() as this is redundant to the checks
performed in check_sanity().
Moved install and changelog handling in create_srcpackage() to after
source array files, as this is more logical and readily allows for the
following.
A check is made when creating a source package that a symlink to an
install file has not already been added. This can occur if the
install file is used multiple times or if it is listed in the source
array.
Fixes FS#18831, FS#18394 and partially fixes FS#16004
Signed-off-by: Allan McRae <allan@archlinux.org>
Compare a list of packages on the system before and after dependency
resolution in order to get a complete list of packages to remove. This
allows makepkg to remove packages installed due to provides.
Bail in cases where packages that were on the system originally have been
removed as there is a risk of breaking the system when removing the new
packages.
Fixes FS#15144.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We had the long option wrong in some places and its behavior wasn't
documented at all with regards to -U/--upgrade.
Signed-off-by: Dan McGee <dan@archlinux.org>
It caught me by surprise that:
1. These weren't being tested at all
2. The --dbonly combined with -U not only "works" but is also completely
undocumented. It also has some weird behavior on install vs. upgrade that
may need addressing.
Add some tests which will hopefully provoke some discussion.
Signed-off-by: Dan McGee <dan@archlinux.org>
In addition, I permuted shortopts to make it more readable.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
The request of FS#12950 is implemented.
On the backend side, I introduced a new function, alpm_db_set_pkgreason(),
to modify the install reason of a package in the local database. On the
front-end side, I introduced a new main operation, -D/--database, which has
two options, --asdeps and --asexplicit. I documented this in pacman manual.
I've created two pactests to test -D: database001.py and database002.py.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Don't explicitly add things to the list that might not need to be there, and
get the fallback list of libraries correct.
Signed-off-by: Dan McGee <dan@archlinux.org>
Include the object file directly from the libalpm version comparison code as
it is the only thing we need. This drops the dependency of vercmp on
libalpm and all of the stuff we know it drags in.
Signed-off-by: Dan McGee <dan@archlinux.org>
It isn't really necessary here and it helps us get rid of some link
pollution so we can have a slim vercmp binary.
Signed-off-by: Dan McGee <dan@archlinux.org>
This will facilitate using this object file on its own in the vercmp tool
which will be done in a future commit. The net impact on the generated
binaries should not be noticeable after this commit.
Signed-off-by: Dan McGee <dan@archlinux.org>
File permissions are not guaranteed to stay the same on exit from fakeroot,
so repackaging may result in files with different permissions. This is
avoided when using a package() function (or split packages) as the
packaging step is rerun.
Signed-off-by: Allan McRae <allan@archlinux.org>
[Dan: touched up message for translation purposes]
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch fixes 2 issues I encountered when cross-compiling pacman.
First is the test for libfetch which requires explicit linking to all
libraries libfetch depends on.
The other problem results from the AC_CHECK_PROGS test for git. This
test will stop configure with an error when cross-compiling.
The fix moves the call to AC_CHECK_PROG so that is only called of
--enable-git is actually set.
Signed-off-by: Matthias Lanzinger <mlaenz@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Just as we do in -Qi, we can compute required by information for sync
database packages. The behavior seems sane; for a given package, the -Sii
required by will show all packages in *any* sync database that require it.
Implements FS#16244.
Signed-off-by: Dan McGee <dan@archlinux.org>
Since we were searching for '.pkg.tar.gz' before, we now have started to
show extensions during the download when we have a '.pkg.tar.xz' package.
Just look for '.pkg.tar.' (or '.db.tar.') instead and suppress anything
found from that point on.
Signed-off-by: Dan McGee <dan@archlinux.org>
Basically I'm the idiot that thought I could make it better and completely
forgot how freeing the contents of the original lists would screw up our
nice little diff extraction lists. This caused segfaults among other
problems. Last time I try to do that...
Program received signal SIGSEGV, Segmentation fault.
0x00007ffff627ce26 in strcmp () from /lib/libc.so.6
(gdb) bt
Signed-off-by: Dan McGee <dan@archlinux.org>
Follow-up to the previous "Only extract new DB entries" patch; move the
partial extraction code inside one side of the loop so we can use the same
code for actually doing file extraction.
Signed-off-by: Dan McGee <dan@archlinux.org>
This implements FS#15198. The idea apparently came from Csaba Henk
<csaba-ml <at> creo.hu> which submitted a patch to Frugalware, so thanks to
him, even though I did not look at the code :)
The idea is to only extract folders for new packages into the package
database and clean up the old directories. This is essentially implementing
Xyne's "rebase" script within pacman.
If using -Syy, just remove and extract everything.
If using -Sy :
1. Generate list of directories in DB
2. Generate list of directories in archive
3. Compare both
4. Clean up old directories
5. Extract new directories
Original-work-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
[Dan: fix compile error, s/int/size_t/]
Signed-off-by: Dan McGee <dan@archlinux.org>
And a new --print-format option to configure the output.
This implements FS#14208
Example usage :
pacman -Sp --print-format "%r/%n-%v : %l [%s]" kdelibs
extra/kdelibs-4.3.2-4 : ftp://mir2.archlinuxfr.org/archlinux/extra/os/i686/kdelibs-4.3.2-4-i686.pkg.tar.gz [0,00]
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes FS#17523
We always used a fixed value of 50 for textlen, which is often not enough
for download progress bar. At least we can use a bigger width on large
terminal (e.g. 60% of width) and keep 50 as minimum.
before:
nautilus-2.28.4-1-x... 5.7M 789.2K/s 00:00:07 [####################################] 100%
after:
nautilus-2.28.4-1-x86_64 5.7M 770.7K/s 00:00:08 [##############################] 100%
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
1 - Explain magic numbers
2 - There was a weird off by 1 mess in the progress bar. The code supposedly
shared the width between 50 chars for text (textlen) and the rest for the
progress bar (proglen = getcols() - textlen).
But the code actually used textlen + 1 for the text and proglen - 1 for the
progress bar (with haslen=1, the progress bar was actually empty), which was
a bit confusing so I changed it.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
When a man page has both symbolic and hard links, any symlink pointing
to other than the alphabetically first hardlink was not "compressed"
and left dangling towards the uncompressed man page. Fixes FS#18569.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The newly added variables STRIP_BINARIES, STRIP_SHARED and STRIP_STATIC,
that are set in makepkg.conf, specify the strip options used on binaries
and shared and static libraries.
In addition, files are now stripped more aggressively by default.
Implements FS#13592 the way it was suggested by Allan in the comments.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
It was noted in FS#17533 that setgid bits are carried down into any created
subdirectories, and thus could end up being in a built package if the
original package directory was marked g+s. When we create src/ and pkg/,
explicitly chmod them to remove any sticky bits.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
When PKGDEST pointed to a non-writable location, makepkg would fail
after completing the build process. This patch makes it abort as
soon as PKGDEST is parsed.
Also, move the SRCDEST check to the same point rather than right
before downloading sources (which was after dependency checks).
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The location of the used utilities may and does differ between various
distributions and therefore absolute paths do not work well. Since the
main purpose of its introduction was to avoid side-effects caused by
aliases, it is sufficient to disable possible aliases temporarily by
preceding the commands with a backslash.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Dan McGee <dan@archlinux.org>
