Note failure to detect a conflict between a directory in one package
and a file in the other when the directory is not currently on the
filesystem.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The wrong test file was inadvertantly committed in 44e9fdd0. Add the
correct test and tidy up the test which was committed.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When cleaning the cache, ask for each cachedir separately.
Allan: add some white space in output
Signed-off-by: Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This extra newline leaves a gap that looks strange in of itself,
but is highlighted when piping -g output to a PKGBUILD.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
add the asdeps flag for makepkg so that it does pacman -U --asdeps
[Allan: clean-up whitespace]
Signed-off-by: Daniel Wallace <daniel.wallace12@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
With glibc-2.16, using -D_FORTIFY_SOURCE requires that optimization (-O)
be used or it will prodice a warning message. Enable -Werror in our
test for _FORTIFY_SOURCE support to catch when a users specifies CFLAGS
without optimization.
The line to set CFLAGS="" when no CFLAGS are specified (either due to
being unset or geniunely empty) is required as autoconf will use
"-O2 -g" for its tests by defult when CFLAGS is unset, but will not add
them to the CFLAGS used...
Signed-off-by: Allan McRae <allan@archlinux.org>
Make an array out of our various glob skip patterns and loop through
them looking for items to skip. Additionally, when doing a full clean,
delete all objects rather than respect this skip list.
Signed-off-by: Dan McGee <dan@archlinux.org>
Give the generated package the correct architecture in its filename
rather than assuming the system architecture.
Also add updated copyright notice.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
74274b5dc3 which added the real_line_size to the buffer struct
didn't properly account for what happens when archive_fgets has to loop
more than once to find the end of a line. In most cases, this isn't a
problem, but could potentially cause a longer line such as PGP signature
to be improperly read.
This patch fixes the oversight and focuses on only calculating the line
length when we hit the end of line marker. The effective length is then
calculated via pointer arithmetic as:
(start_of_last_read + read_length) - start_of_line
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Take advantage of the fact that our filelists are arrays sorted by
filename with a known length and use a binary search. This should speed
up file conflict checking, particularly when larger packages are
involved.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This may very well be a no-op, but better safe than sorry.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
On the assumption that these arrays are already mostly sorted, use the
standard quicksort method to sort the files arrays. The files_msort
function name is tweaked to give it a more general name to reflect this
change.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
if fopen returns NULL, append the libc strerror-ized error message to
our own error message.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Avoid involving the user's ~/.curlrc file as this may alter the expected
behavior of downloads.
ref: https://bbs.archlinux.org/viewtopic.php?pid=1124441
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When checking if a package owns a directory, it is important to check
not only that all the files in the directory are part of the package,
but also if the directory is part of a package. This catches empty
subdirectories during conflict checking for directory to file/symlink
replacements.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When two packages own an empty directory, pacman finds no conflict when
one of those packages wants to replace the directory with a file or a
symlink. When it comes to actually extracting the new file/symlink,
pacman sees the directory is still there (we do not remove empty
directories if they are owned by a package) and refuses to extract.
Detect this potential conflict early and bail. Note that it is a
_potential_ conflict and not a guaranteed one as the other package owning
the directory could be updated or removed first which would remove
the conflict. However, pacman currently can not sort package installation
order to ensure this, so this conflict requires manual upgrade ordering.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add a man page for the pactree utility.
Feedback-from: Allan McRae <allan@archlinux.org>
Feedback-from: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Ram Bhamidipaty <rambham@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
I find that when copying the output of "pacman -Qs foo" into a
"pacman -Qi" operation to get more information on the packages, I
consistently copy the "local/" prefix. It is a minor usability
improvement to strip this if present.
Dan: Pluck out LOCAL_PREFIX and magic numbers.
Signed-off-by: Allan McRae <allan@archlinux.org>
This function is the reverse of human_to_size, and converts integer byte
sizes to human readable SI prefixed values.
A logical extension of this might be to mimic the formatter that pacman
uses and allow a second argument to be passed in which can coerce the
size, rather than reducing until the unit count is below 1024.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Update the documentation accordingly to mention that users can expect
huamn readable sizes to be acceptable.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
This is a bash wrapper around an awk function that parses human readable
sizes and returns their representative values in bytes, as a string. A
small test harness is added to validate the functionality.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Only load filesystem details for the mount points that we're actually
going to write to. This reduces our syscall count considerably. In the
case of installation, we would actually stat every mountpoint twice (an
extra round for download diskspace) which means (on my system) a total
of 60 syscalls to write to 3 partitions when installing the kernel
package. This change reduces the 60 syscalls down to the expected 3.
A slight debug output change is added here to discern between a
mountpoint added to our linked list versus when we actually load the fs
info.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
add mount_point_load_fsinfo() for platforms using getmntent().
Dan: move the #ifdef slightly so we don't have unused functions on
certain platforms (e.g., OS X).
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
With pacman-key now having the ability to use names in --list-keys etc,
we can remove the comments that temporarily blocked this in the zsh
completion file.
Signed-off-by: Daniel Wallace <daniel.wallace@gatech.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
Similar to the case for makedepends, it is useful to be able to
access this information without parsing a PKGBUILD.
Signed-off-by: Allan McRae <allan@archlinux.org>
I have noticed that quite a number of packages fail with "makepkg -R"
when their (make)dependencies are not installed. Adjust makepkg to
check for dependencies when used with -R. This can still be avoided
by using --nodeps/-d.
Signed-off-by: Allan McRae <allan@archlinux.org>
This is already being used (despite not working...) in packages
in the Arch Linux repos.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Allow makepkg to work correctly when used with find from busybox.
Fix handling of cross directory symlinks.
Signed-off-by: Jeremy Huntwork <jhuntwork@lightcubesolutions.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Check for an exact match when querying ownership of files in the root.
Previously, our test was too simple and would match the the basename of
package files against the query parameter, e.g.
$ pacman -Qo config
/config is owned by cower-git 20120614-1
Adds a new test to verify this behavior, query007.py.
Fixes FS#30388.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
m4 has a field day parsing escapes and actually vandalizes this string,
causing the error to look like:
==> ERROR: \PKGBUILD\ not found or is not a file
Avoid all quoting and just match up with how makepkg reports errors (no
quoting at all).
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
If known, callers can pass the line size to this function in order to
avoid an strlen call. Otherwise, they simply pass 0 and
_alpm_strip_newline will do the call instead.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
