This adds a some new callback event and progress codes for package
loading, which was formerly bundled in with package validation before.
The main sync.c loop where loading occurred is now two loops running
sequentially. The behavior should not change with this patch outside of
progress and event display; more changes will come in following patches.
Signed-off-by: Dan McGee <dan@archlinux.org>
_alpm_pkg_load_internal() was becoming a monster. Extract the top bit of
the method that dealt with checksum and signature validation into a
separate method that should be called before one loads a package to
ensure it is valid.
Signed-off-by: Dan McGee <dan@archlinux.org>
Do this outside the loop to prevent the message from being displayed
(and pluralized!) for each individual package.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
None of these are hot-code paths, and at least the target reading has
little need for an arbitrary length limitation (however crazy it might
be to have longer arguments).
Signed-off-by: Dan McGee <dan@archlinux.org>
This is always true at the end since we return early if we couldn't
create the tmpdir, so it is totally unnecessary.
Signed-off-by: Dan McGee <dan@archlinux.org>
We shouldn't be going through the accessor that does a bunch of
unnecessary legwork, including potentially loading the pkgcache right
before we free it.
Signed-off-by: Dan McGee <dan@archlinux.org>
Rather than using a string-based path, we can restore the working
directory via a file descriptor and use of fchdir().
From the getcwd manpage:
Opening the current directory (".") and calling fchdir(2) to
return is usually a faster and more reliable alternative when
sufficiently many file descriptors are available.
Signed-off-by: Dan McGee <dan@archlinux.org>
We did a lot of both malloc-ing and stack printing to form some paths in
this code. Attempt to unify it all into the one get_pkgpath() method by
adding an optional third "filename" parameter, and form the necessary
path string all in one go.
Signed-off-by: Dan McGee <dan@archlinux.org>
1. Don't run it if something failed in package removal- this mirrors
what we already do in sync transactions.
2. Don't run it if we are invoking it for the replaces removal bit of a
sync transaction- it doesn't make sense to run ldconfig halfway through
a sync install; we should only run it once at the end.
Signed-off-by: Dan McGee <dan@archlinux.org>
We add them to this list with the root path not appended; we should be
searching for them this way as well.
Signed-off-by: Dan McGee <dan@archlinux.org>
We checked the (fgets == NULL and !feof) case, but never actually bailed
out of the loop if we were at the end of the file, causing infinite
looping.
Signed-off-by: Dan McGee <dan@archlinux.org>
This shouldn't really be declared with const, and causes a compile error
when -Wcast-qual is used. Remove the const specifier from the function
specification and all implementations.
Also fix one other trivial -Wcast-qual warning in _alpm_db_cmp().
Signed-off-by: Dan McGee <dan@archlinux.org>
We never ended up using or really needing this; kill it for now knowing
it is in git history if ever needed again.
Signed-off-by: Dan McGee <dan@archlinux.org>
This function doesn't exist on OSX. Since there aren't any other
candidates in alpm for which this function would make sense to use,
simply replace the function call with a loop that does the equivalent.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
single quotes expanded to nothing, leaving us with a command that
assumed the sed expression was the backup suffix. Use a pair of escaped
double quotes, which survives automake and ends up properly in makepkg.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is superfluous as the ensuing for loop will exit immediately on the
same condition avoided by the if.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Since c51b9ca, ldconfig.stub is required by pactest so we need to
include it as part of the dist tarball.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes build errors when performing a manual install straight to a
filesystem where the files already exist.
Reported-by: Sergej Pupykin <ml@sergej.pp.ru>
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
There is no need to print them into buffers; we can use the values
returned by gettext() directly without issue.
Signed-off-by: Dan McGee <dan@archlinux.org>
4ed12ae tightened up the logic to use only find, but ignored the fact
that since the manpage hard link names were no longer captured. They
were created as separate compressed manpages, rather than as hardlinks.
This also introduces a minor efficiency of deleting all hardlinks at
once and using proper iteration over an array rather than a string.
Note to anyone else touching this code: e2fsprogs and libpcap are useful
for testing this. If that changes in the future, you can use the below
bash to locate others:
IFS=$'\n' read -rd '' -a a < <(find /usr/share/man -type f \! -links 1)
pacman -Qqo "${a[@]}" | sort -u
I broke it!
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
When a sourceball passes this check without any warnings, a newline is
omitted. Similar to the if clause of this else block, print a single new
line at the end of the clause instead of accounting for each output.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
This prevents makepkg from aborting with 'file not found' when
changelog= or install= are declared in a PKGBUILD, but empty.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Similar to an earlier commit which accounts for .part files for full
packages, calculate the download_size for deltas keeping mind the
possibility of a partial transfer.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Check for the existance of a partial download of a package file before
jumping to delta calculations. Currently, if there were 10MiB remaining
in a 100MiB the values passed to the front end do not reflect this.
Refactored from an old patch originally by Dan.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
if ~/.netrc exists and has credentials for the hostname requested in a
download, they will be provided in an http auth request. This can still
be overridden by explcitly declaring user:pass in the URL.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a fix for a bash3 specific bug, where a file sourced by
/etc/profile would exit non-zero and make its way back up to makepkg,
forcing it to exit after package installation. Along with unsetting the
ERR handler, temporarily unset errexit to avoid this.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Display now looks like this, whereas before we would have just showed
'2M/s' for the extra repository download. The cutoff is placed at 100.0
to ensure we only use 4 character slots of width (e.g. '99.9', '100').
:: Synchronizing package databases...
testing 39.9 KiB 470K/s 00:00 [######################] 100%
core 51.4 KiB 469K/s 00:00 [######################] 100%
extra 768.8 KiB 2.1M/s 00:00 [######################] 100%
community-testing 1941.0 B 54.4M/s 00:00 [######################] 100%
multilib 26.6 KiB 458K/s 00:00 [######################] 100%
community 449.8 KiB 1649K/s 00:00 [######################] 100%
Signed-off-by: Dan McGee <dan@archlinux.org>
This will be the first thing printed when doing an upgrade. Currently
there is no output at all until we start resolving dependencies, which
can be a while in if specifying very large targets on the command line,
in which case it is nice to let the user know we are doing something.
Addresses FS#25822 in the most KISS way possible.
Signed-off-by: Dan McGee <dan@archlinux.org>
- display associated warnings on same line as pass/fail msg, to be more
consistent with checksum verification output
- properly error on a revoked key (matching pacman's behavior)
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
This adjusts type usage to match POSIX provided types from
<sys/types.h> rather than assuming everything will fit in a long or
unsigned long. Use fsblkcnt_t (unsigned) and blkcnt_t (signed) as
appropriate. These are affected the same way off_t is on 32 bit
platforms, where the types are extende to 64 bits if large file support
is enabled.
Because most numbers here are block counts, this isn't
near as pressing as using a 32-bit variable for file sizes where
anything over 2GiB can burn you; we likely can support files at least
512 but mainly 4096 times larger.
Signed-off-by: Dan McGee <dan@archlinux.org>
We don't need to keep track of how many files are in a package now that
said value is provided to us. It also makes more sense to use size_t
here for types rather than the (hopefully never too short) int.
Signed-off-by: Dan McGee <dan@archlinux.org>
Changes in commit dc3336c277 caused this to stop working as expected for
sync packages, due to the way the logic is structured. Ensure we always
enter the signature code if the bitflag is flipped on to check
signatures for packages. Rename 'use_sig' to 'has_sig' for clarity.
Signed-off-by: Dan McGee <dan@archlinux.org>
