Only one of these looked like a real red flag, in find_requiredby(), but
it doesn't hurt to fix several of them up anyway.
Unfortunately, we can't turn this on universally due to things like the
sync(), remove(), etc. builtins which we often use as variable names.
Signed-off-by: Dan McGee <dan@archlinux.org>
Documented the _alpm_download() function in dload.c
Signed-off-by: Kerrick Staley <mail@kerrickstaley.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We didn't do due diligence before and ensure prior pm_errno values
weren't influencing what happened in further ALPM calls. I observed one
case of early setup code setting pm_errno to PM_ERR_WRONG_ARGS and that
flag persisting the entire time we were calling library code.
Add a new CHECK_HANDLE() macro that does two things: 1) ensures the
handle variable passed to it is non-NULL and 2) clears any existing
pm_errno flag set on the handle. This macro can replace many places we
used the ASSERT(handle != NULL, ...) pattern before.
Several other other places only need a simple 'set to zero' of the
pm_errno field.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the last user of our global handle object. Once again the diff
is large but the functional changes are not.
Signed-off-by: Dan McGee <dan@archlinux.org>
This requires a lot of line changes, but not many functional changes as
more often than not our handle variable is already available in some
fashion.
Signed-off-by: Dan McGee <dan@archlinux.org>
This will make the patching process less invasive as we start to remove
this variable from all source files.
Signed-off-by: Dan McGee <dan@archlinux.org>
The usefulness of this is rather limited due to it not being compiled
into production builds. When you do choose to see the output, it is
often overwhelming and not helpful. The best bet is to use a debugger
and/or well-placed fprintf() statements.
Signed-off-by: Dan McGee <dan@archlinux.org>
Callers to curl_download_internal now tell us if its okay to continue a
transfer, so obey this instead of using a heuristic.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
If a connection drops below 1kb/s for 10s, curl will kill the transfer
and we'll report failure. This is the average transfer speed over the
delta defined by CURLOPT_LOW_SPEED_TIME, so setting a low value here
shouldn't bother folks using 14.4k dial-up.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This started off removing the "(void)foo" hacks to work around
unused function parameters and ended up fixing every warning
generated by -Wunused-parameter.
Dan: rename to UNUSED.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
There's a lot of related moving parts here:
* Iteration through mirrors is moved back to the calling functions. This
allows removal of _alpm_download_single_file and _alpm_download_files.
* The download function gets a few more arguments to influence behavior.
This allows several different scenarios to customize behavior:
- database
- database signature (req'd and optional)
- package
- package via direct URL
- package signature via direct URL (req'd and optional)
* For databases, we need signatures from the same mirror, so structure
the code accordingly.
Some-inspiration-from: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The allow_resume is the start of the fix to the "don't ever resume
database downloads" problem, as well as being useful for '.sig'
downloads as well. For now, we say "always allow resume", but this will
eventually get pushed down as necessary.
Error checks are reworked in order to correctly error out when a file is
not found on the remote end and reports 0 bytes downloaded. In addition,
the two error messages printed are now different as one reports a more
specific error message provided via the cURL error buffer.
Some example output from an -Sy run with [testing], [community],
[community2], [eee], and [nonexistant] defined as repos. [community2]
and [nonexistant] are both invalid, one using FTP and one using HTTP.
:: Synchronizing package databases...
testing is up to date
community is up to date
error: failed retrieving file 'community2.db' from ftp.archlinux.org : Given file does not exist
error: failed to update community2 (FTP: couldn't retrieve (RETR failed) the specified file)
eee is up to date
error: failed retrieving file 'nonexistant.db' from code.toofishes.net : The requested URL returned error: 404
error: failed to update nonexistant (HTTP response code said error)
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the standard, and we have had a few of these introduced lately
that should not be here.
Done with:
find -name '*.c' | xargs sed -i -e 's#if (#if(#g'
find -name '*.c' | xargs sed -i -e 's#while (#while(#g'
Signed-off-by: Dan McGee <dan@archlinux.org>
That's a funny one, building with optimization levels (with both gcc and
clang) caused open_mode to always be set to "ab", which worked.
This was spotted both with clang-analyzer, and by Jakob who reported a
segfault as he was using an un-optimized build.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This greatly simplifies the cleanup fallthrough in our download function
and we'll be able to reuse this for signatures.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Based on the fact that localf always points to the same file, there's no
need to code in multiple fopen calls with varying results. Instead,
track the desired file open mode and make a single call to fopen.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Create a more general function that allows appending a suffix to a
filepath.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This lets us determine the real size of the file on disk so that we can
properly bump the progress bar when we're resuming a download.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Our curl callback does a whole lot of work for nothing if the front end
never defined a callback to receive the data we'd calculate for it.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
CURLINFO_HTTP_CODE is deprecated in favor of CURLINFO_RESPONSE_CODE.
Both yield the same values.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The files we transfer are generally compressed already, so this just
adds unnecessary overhead.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Use a static variable to effectively track the initialization state of
the progress callback via the last byte amount reported as downloaded by
libcurl.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
* introduces new macro in util.h (DOUBLE_EQ) for properly comparing
floating point values
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Drawing progress bars before calling curl_easy_perform() is needless as
the curl progress callback is called with zero progress before actually
downloading the file anyways. Fixes display of "0%" progress bars when
sync'ing package databases that are already up to date.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
This was discussed and more or less agreed upon on the mailing list. A
huge checkin, but if we just do it and let people adjust the pain will
end soon enough. Rebasing should be relatively straighforward for anyone
that sees conflicts; just be sure you use the new return style if
possible.
The following semantic patch was used to do the change, along with some
hand-massaging in order to preserve parenthesis where appropriate:
The semantic match that finds this problem is as follows, although some
hand-massaging was done in order to keep parenthesis where appropriate:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression a;
@@
- return(a);
+ return a;
// </smpl>
A macros_file was also provided with the following content:
Additional steps taken, mainly for ASSERT() macros:
$ sed -i -e 's#return(NULL)#return NULL#' lib/libalpm/*.c
$ sed -i -e 's#return(-1)#return -1#' lib/libalpm/*.c
Signed-off-by: Dan McGee <dan@archlinux.org>
this is just some debuggery to allow pacman to operate with both fetch
and curl at the same time. use the PACMANDL variable to control which
library is used.
Signed-off-by: Dave Reisner <d@falconindy.com>
This is a feature complete re-implementation of the fetch based internal
downloader, with a few improvements:
* support for SSL
* gzip and deflate compression on HTTP connections
* reuses a single connection over the entire session for lower resource
usage.
Signed-off-by: Dave Reisner <d@falconindy.com>
no actual code changes here. change preprocessor logic to include
get_tempfile, get_destfile, signal handler enum, and the interrupt
handler logic when either HAVE_LIBCURL or HAVE_LIBFETCH are defined.
Signed-off-by: Dave Reisner <d@falconindy.com>
Do this in preparation for implementing similar curl based
functionality. We want the ability to test these side by side.
Signed-off-by: Dave Reisner <d@falconindy.com>
We located files in a few places but didn't check if they were files or
directories. Ensure they are actually files using stat() and S_ISREG(); this
showed itself when trying to download to the directory name itself in
FS#22645.
Signed-off-by: Dan McGee <dan@archlinux.org>
None of these warn at the normal "-Wall -Werror" level, but casts do occur
that we are fine with. Make them explicit to silence some warnings when
using "-Wconversion".
Signed-off-by: Dan McGee <dan@archlinux.org>
We use PATH_MAX everywhere by including limits.h so there is no
point in doing a check for it in a different header when dealing
with FreeBSD's libfetch.
Also, remove autoconf check for strings.h header as it is not used
anywhere.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
