Change the 'provname provver' format to 'provname=provver'.
In .PKGINFO, the provisions are copied from the PKGBUILD without quotes. So
the provision version was actually handled as a different provision...
See FS#9171.
Dan: Unfortunately we have to change our original specification for
versioned provisions with this patch, but it ends up being the simpler and
cleaner solution in the long run, and if there is any time to change it the
time is now before many packages have been built. Keeping the ' ' based
format would have required us to do special parsing in repo-add, as well as
being susceptible to users not using quotes in their provides array.
Hopefully this will resolve the issues we had with our initial plan. Sorry
for the confusion.
Acked-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This addresses some of the issues in FS#9192. Attempt to clarify the -Rc
and -Rs options in the man page.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Add documentation for --holdver (from Scott) and --forcever (saying this
is an internal option that should not be used by most end users), and
re-alphabetize the --asroot option.
Signed-off-by: Dan McGee <dan@archlinux.org>
It turns out the orphan name was misleading. Real orphans are packages
installed as dependency no longer required by any others (-Qtd).
The -t option only shows package not required by any others, so --unrequired
describes it better.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Document the following:
* -R can take a group
* -S can take a group and provision
I also split up the -S description into multiple paragraphs because it
was getting too large.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
[Dan: added some feedback from the ML, rewrapped lines]
Signed-off-by: Dan McGee <dan@archlinux.org>
Update description of path specifiers for both pacman and pacman.conf in
their respective manpages. Ensure it is obvious that they are absolute and
not relative paths.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is an Arch-specific tool (although others could find use in it), so
off to the standalone ABS package it goes.
Signed-off-by: Dan McGee <dan@archlinux.org>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case manlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 012f793978 was a bit misguided in its
thinking, and resulted in a package built without asciidoc enabled not
installing the manpages to the system on a 'make install' operation. Fix
this behavior by making manpages required in a normal build, and in order to
disable their existence, the '--disable-doc' option must be used.
Hopefully this solves manpage issues for both developers and package
builders while allowing as much flexibility as possible.
Signed-off-by: Dan McGee <dan@archlinux.org>
Make the manpage a little more distro agnostic by referring to ABS in the
context of Arch Linux, and saying that prototype files are also available
with the pacman source.
Signed-off-by: Dan McGee <dan@archlinux.org>
During a pacman operation such as a group install, pacman can ask several
questions such as "local version is up to date. Upgrade anyway?". They are
usually all answered either by yes or by no:
* yes when you want to reinstall all the targets.
* no when you only want to install the missing ones (either because you are
installing a group, or because you are copying a pacman -S line from wiki or
whatever).
So instead of asking this question for each target, it is now now configured
with a flag. Yes will be the default -S behavior, No will be achieved with
the --needed flag.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This operation made sense in the days before sync DBs existed, but it no
longer has the same usefulness it once did.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
Note that if you are building manpages with asciidoc now, you must also
have source-highlight installed for it to correctly generate everything.
Signed-off-by: Dan McGee <dan@archlinux.org>
As the b96922679e commit showed with two
pactests (which were renamed to depconflict110/111), versioned conflicts are
now possible.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch introduces versioned provisions in "provision 1.0-1" format.
_alpm_db_whatprovides was modified accordingly (added sync500.py),
alpm_depcmp was modified accordingly (add043.py passes now; added add044.py
and add045.py).
Notes:
alpm_db_search now uses the whole versioned %PROVIDES% string in its search.
debug logging was simplified in alpm_depcmp.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Xavier: fixed a few typos, duplicate const strings with strdup before
modifying them, put some debugging back in alpm_depcmp, minor code cleanups
(var/function renaming), added a note in PKGBUILD man page.]
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: made strcmp checks clearer, added a comment]
Signed-off-by: Dan McGee <dan@archlinux.org>
This makes --ignore and --ignoregroup able to accept multiple
packages/groups by separating each with a comma.
For instance: pacman -Su --ignore kernel26,udev,glibc
This was requested in the comments of FS#8054.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We really don't need it since it is just links. However, we do need to figure
out how to get our old links to show up right.
Signed-off-by: Dan McGee <dan@archlinux.org>
The lack of descriptions on some of the variables was causing issues with
documentation generation. Adding text to them fixes this.
Signed-off-by: Dan McGee <dan@archlinux.org>
The old one was old. Use something a bit more recent and a bit simpler as
well so it actually looks OK in the manpage.
Signed-off-by: Dan McGee <dan@archlinux.org>
Delta files will be used if the size is smaller than a percent
(MAX_DELTA_RATIO) of the package size.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We had way too much going on with the Doxygen manpage generation. Clean it
up quite a bit by removing directory manpages, using relative paths, not
having a manpage for every single alpm function, and ensuring internal
functions are not documented publicly.
Signed-off-by: Dan McGee <dan@archlinux.org>
I suppose -Qii could be used for other things than displaying
the list of backup files, but currently, it's the only one,
so that's how I documented it..
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
If we don't have asciidoc installed or enabled, we should still have a
successful make. However, we want to ensure 'make dist' fails without
asciidoc. This commit should ensure this.
Signed-off-by: Dan McGee <dan@archlinux.org>
This reverts commit dfc85cb5f5
and b6f3fe6957.
This DB check is already in testdb (among others).
Also testdb now uses the db path set at make time by default,
so specifying the db path is optional.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
.gitignore works recursively, so we don't need Makefile and Makefile.in
in all of the subdirectory .gitignore files.
Signed-off-by: Dan McGee <dan@archlinux.org>
Spruce up the asciidoc formatting, fix a few issues that we had. Formatting
now looks pretty good in both the manpage output and the XHTML output.
Also added some options that we have changed since 3.0, and a few wording
updates, etc.
Signed-off-by: Dan McGee <dan@archlinux.org>
