Many alpm_option_get/set_*() functions already check this
and set pm_errno to the right value, but not all, so
this improves consistency.
Signed-off-by: Rémy Oudompheng <remy@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
* introduces new macro in util.h (DOUBLE_EQ) for properly comparing
floating point values
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This was discussed and more or less agreed upon on the mailing list. A
huge checkin, but if we just do it and let people adjust the pain will
end soon enough. Rebasing should be relatively straighforward for anyone
that sees conflicts; just be sure you use the new return style if
possible.
The following semantic patch was used to do the change, along with some
hand-massaging in order to preserve parenthesis where appropriate:
The semantic match that finds this problem is as follows, although some
hand-massaging was done in order to keep parenthesis where appropriate:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression a;
@@
- return(a);
+ return a;
// </smpl>
A macros_file was also provided with the following content:
Additional steps taken, mainly for ASSERT() macros:
$ sed -i -e 's#return(NULL)#return NULL#' lib/libalpm/*.c
$ sed -i -e 's#return(-1)#return -1#' lib/libalpm/*.c
Signed-off-by: Dan McGee <dan@archlinux.org>
We only call these from the transaction init and teardown, so move them
to that file, mark them static, and push more of the logic of handle
manipulation into these functions.
Signed-off-by: Dan McGee <dan@archlinux.org>
According to FOPEN(3), using fclose on an fdopen'd file stream also
closes the underlying file descriptor. This happened in _alpm_lckmk
(util.c), which meant that when alpm_trans_release closed it again, the
log file (which reused the original file descriptor) was closed instead.
Signed-off-by: Jonathan Conder <jonno.conder@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The old function was written in a time before we relied on it for nearly
every operation. Since then, we have switched to the archive backend and now
fast parsing is a big deal.
The former function made a per-character call to the libarchive
archive_read_data() function, which resulted in some 21 million calls in a
typical "load all sync dbs" operation. If we instead do some buffering of
our own and read the blocks directly, and then find our newlines from there,
we can cut out the multiple layers of overhead and go from archive to parsed
data much quicker.
Both users of the former function are switched over to the new signature,
made easier by the macros now in place in the sync backend parsing code.
Performance: for a `pacman -Su` (no upgrades available),
_alpm_archive_fgets() goes from being 29% of the total time to 12% The time
spent on the libarchive function being called dropped from 24% to 6%.
This pushes _alpm_pkg_find back to the title of slowest low-level function.
Signed-off-by: Dan McGee <dan@archlinux.org>
Always declare a function with (void) rather than () when we expect
no arguements. Fixes all warnings with -Wstrict-prototypes.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is prepping for the addition of a hash field to each package to greatly
speed up the string comparisons we frequently do on package name in
_alpm_pkg_find.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a delta specific definition so it makes more sense to put
it in the delta specific header file.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The splitname function is a general utility function and so is better
suited to util.h. Rename it to _alpm_splitname to indicate it is an
internal libalpm function as was the case prior to splitting local and
sync db handling.
Signed-off-by: Allan McRae <allan@archlinux.org>
After our recent screwup with size_t and ssize_t in the download code, I
found the `-Wsign-conversion` flag to GCC to see if we were doing anything
else boneheaded. I didn't find anything quite as bad, but we did have some
goofups- most of our public unsigned methods would return -1 on error, which
is a bit odd in an unsigned context.
Signed-off-by: Dan McGee <dan@archlinux.org>
This function is unused since commit
358cc5804a.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
[Dan: also kill from util.h]
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes FS#15294.
The code to run a command inside a chroot was refactored from the
_alpm_runscriptlet function to _alpm_run_chroot.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
free() is designed to do nothing if it is passed a NULL pointer, so there is
no need to check for it on our end. Change/fix the macro.
Signed-off-by: Dan McGee <dan@archlinux.org>
This crude function allows reading from an archive on a line-by-line basis
similar to the familiar fgets() call on a FILE stream. This is the first
step in being able to read DB entries straight from an archive.
Signed-off-by: Dan McGee <dan@archlinux.org>
test_delta_md5sum and test_pkg_md5sum were simple wrappers to test_md5sum,
and only used once, so not very useful. I removed them.
Also, test_md5sum and alpm_pkg_checkmd5sum functions were a bit duplicated,
so I refactored them with a new _alpm_test_md5sum function in libalpm/util.c
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
This also affects all structures with static strings, such as depmiss,
conflict, etc. This should help a lot with memory usage, and hopefully make
things a bit more "idiot proof".
Currently our pactest pass/fail rate is identical before and after this
patch. This is not to say it is a perfect patch- I have yet to pull valgrind
out. However, this should be quite safe to use in all situations from here
on out, and we can start plugging the memleaks.
Original-work-by: Aaron Griffin <aaronmgriffin@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Update the GPL boilerplate to direct people to the GNU website for a copy of
the license, as well as bump all of Judd's copyrights to 2007.
Signed-off-by: Dan McGee <dan@archlinux.org>
Legacy code is hitting the trash here. Remove unnecessary _alpm_time2string
time storage abstraction in favor of just writing the time_t value to the
disk.
The only drawback is that everyone's sync DBs will have to be updated at
least once so that the lastupdate values are stored right. :)
Signed-off-by: Dan McGee <dan@archlinux.org>
Linux lstat follows POSIX standards and dereferences a symlink pointing
to a directory if there is a trailing slash. For purposes of libalpm, we
don't want this so make a lstat wrapper that suppresses this behavior.
Signed-off-by: Dan McGee <dan@archlinux.org>
%d was used, which worked for Linux and FreeBSD. Not so for Darwin. The
warning was probably spat out when compiling on x68_64 as well, but no
developers use this architecture as their primary one.
Signed-off-by: Dan McGee <dan@archlinux.org>
These macros take the place of the common 4 or 5 line blocks of code we had
in most places that called malloc or calloc. This should reduce some code
duplication and make memory allocation more standard in libalpm.
Highlights:
* Note that the MALLOC macro actually uses calloc, this is just for safety
so that memory is initialized to 0. This can be easily changed in one
place.
* One malloc call was completely eliminated- it made more sense to do it
on the stack.
* The use of RET_ERR in public functions (mainly the alpm_*_new functions)
was standardized, this makes sense so pm_errno is set.
Signed-off-by: Dan McGee <dan@archlinux.org>
Anything dealing with libintl and localization should be correctly guarded
inside an ENABLE_NLS block on both the pacman and libalpm sides.
Signed-off-by: Dan McGee <dan@archlinux.org>
Delta files will be used if the size is smaller than a percent
(MAX_DELTA_RATIO) of the package size.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Change the default visibility of libalpm functions to internal instead of
hidden- this allows for slightly better optimization because it tells GCC
that the function can never be called outside of the current module (see
http://gcc.gnu.org/onlinedocs/gcc/Function-Attributes.html).
Also added some attributes to the pacman print functions so that they check
the format strings being passed to them.
Signed-off-by: Dan McGee <dan@archlinux.org>
installdate should never be present in a package descfile, so get rid of it.
With the last commit, we also don't need the util strtoupper function.
Signed-off-by: Dan McGee <dan@archlinux.org>
In order to best resolve bug 6404, move some cachedir handling stuff out of
sync.c and into util.c and create two new functions: filecache_find and
filecache_setup. sync.c was rewritten to use these, and alpm_fetch_pkgurl
now also uses these routines.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove versioncmp.c by moving all functions to locations that make sense.
Move replacement functions (for building without glibc) into util.c where
they belong, and do proper checks for them instead of using __sun__, etc.
Signed-off-by: Dan McGee <dan@archlinux.org>
The scriptlet calling had some unneeded complexity for the time being
which we aren't using here. Let's get rid of it until we find a good way
to implement it correctly.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove the logmask functionality from the backend as it has been moved to
the frontend, and change the logging callback function to use pm_printf.
In addition, make much better use of va_list- use the args list instead
of a arbitrarily chosen string to print to in the logging functions.
Signed-off-by: Dan McGee <dan@archlinux.org>
This change allows us to use all autoconf specified paths, most notably
$(localstatedir). It is quite a change and touches a lot of files, as
all references to the DB and cache were done with the ROOTDIR as a prefix.
* add --lock command-line option to pacman to specify the location of the
lockfile (this can now be specified at configure time by setting the
$localstatedir path).
* Rip quite a few settings out of configure.ac as they are now picked by
setting the paths during configure or make.
* Fix bug with /tmp fallback for sync downloads not working correctly
(related to root location, now the system tmp dir is used).
* Simplified the parameters to some libalpm functions, and added get/set
for the new lockfile option.
* Renamed several of the DEFS to names without the PM_ prefix.
Signed-off-by: Dan McGee <dan@archlinux.org>
Small change (addition of a 'strreplace' function) which replaces
any $repo tokens found in a server line with the name of the repo
or section being processed.
While this is more simplistic than suggestions on flyspray, it works
and I think it is cleaner. Merits can be discussed further.
Ref: FS#6389
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
