Packages are already in the pkg db were given a warning, and then
readded anyway. With -n specified, the warning is printed, but skips
readding it.
Signed-off-by: Danny George <dangets@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Similar to the case for makedepends, it is useful to be able to
access this information without parsing a PKGBUILD.
Signed-off-by: Allan McRae <allan@archlinux.org>
This is useful for tools that automatically rebuild packages and
thus require to generate a build order. These entries are skipped
by pacman.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This removes some unnecessary quotes and adds quotes in a few places to
hopefully work correctly if the tempdir has spaces.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Dan McGee <dan@archlinux.org>
Passing the "-L" flag to stat means we get the size of the file
being pointed to for symlinks instead of the size of the symlink.
Keep "-L" usage in repo-add as we want the actual size of the
package/delta/signature there.
Signed-off-by: Allan McRae <allan@archlinux.org>
This addresses two problems:
1) echo's behavior is inconsistent when dealing with flags, and can
potentially be problematic.
$ echo -n
$ echo -- -n
-- -n
2) Always using the end of options markers prevents translated strings
from throwing errors, as shown in FS#28069.
The remaining "inconsistencies" are because printf is being used in a
guaranteed safe manner, e.g.
printf '%s\n' "$(gettext "--this can never break")"
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Use consistent blank lines across all commands, get rid of the
translated double newlines which only serve to confuse translators, and
fix -h/--help for that extra special third command this script offers.
Signed-off-by: Dan McGee <dan@archlinux.org>
Be more semantically accurate and avoid accidental overwriting of some
configuration variables that are considered to be constant.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
This prevents user error in adding a file generated via `gpg --sign`
rather than `--detach-sign`, for example. The same 16KiB limit is used
we use in our pacman download code.
The section is moved above the checksum generation to avoid presenting
info messages to the user if the signature isn't valid.
Addresses a shortcoming pointed out in FS#27453.
Signed-off-by: Dan McGee <dan@archlinux.org>
This addresses a short but sweet race condition currently existing in
repo-add and repo-remove. We do the smart thing and zip the database to
a location in a temporary directory and not over the original database
directly. However, we then proceed to move this file directly from the
temporary directory to our final location, which is more than likely a
cross-filesystem move (/tmp on tmpfs) and thus non-atomic.
Instead, zip the file to the same directory, prefixing the filename with
'.tmp.'. We then move the file into place. This move is guaranteed to be
atomic, so any reader of the database file will get either the old
version, the new version, or ENOENT.
We also perform a hardlink if possible instead of a move when shifting
the old database out of the way to '.old'; this ensures there is no
chance of a database file not existing during the whole process.
Only one small race condition should now be present- when the database
has been fully moved into place and the signature has not, you may see a
mismatch. There seems to be no good way to address this, and it existed
before this patch.
A final note- if someone had locked-down permissions on the directory
that the database files are in (e.g., could only write to foo.db.tar.gz,
foo.db, foo.db.tar.gz.old, foo.db.old, and the lock file), this would
break.
Signed-off-by: Dan McGee <dan@archlinux.org>
Given our semi-frequent use of pushd/popd, if we are in any directory
but the original and the database path given was relative, we won't
unlock the database file when cleaning up after an error.
Signed-off-by: Dan McGee <dan@archlinux.org>
Replace "/tmp" with "${TMPDIR:-/tmp}" to allow for overriding the
hardcoded path.
Since we only use "/tmp" in conjunction with mktemp(1), we could also
have used "--tmpdir", which is GNU-ish, however (and the BSD counterpart
"-t" has been deprecated in GNU mktemp).
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
This includes some fixes to the messages that are displayed when a
signal is caught in makepkg or repo-add:
* Instead of always showing "==> ERROR: TERM signal caught. Exiting...",
replace "TERM" by whatever signal is actually caught.
* Fix a typo in the SIGERR error message in repo-add ("occurred" instead
of "occured"). Francois already fixed this for makepkg in 1e51b81c.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
There is a small chance that a user sends SIGINT (or any other signal
that is trapped) when we're already in clean_up() which used to lead to
trap_exit() being executed and the remaining code in clean_up() being
skipped due to the bash signal/trap handler blocking EXIT (since its
handler is already being executed, even if it's interrupted).
In practice, this behaviour caused unexpected results (primarily because
pressing ^C at the wrong time left a lock file behind):
$ ./repo-add extra.db.tar.gz foobar
==> Extracting database to a temporary location...
^C
==> ERROR: Aborted by user! Exiting...
$ ./repo-add extra.db.tar.gz foobar
==> Extracting database to a temporary location...
==> ERROR: File 'foobar' not found.
==> No packages modified, nothing to do.
^C
==> ERROR: Aborted by user! Exiting...
$ ./repo-add extra.db.tar.gz foobar
==> ERROR: Failed to acquire lockfile: extra.db.tar.gz.lck.
==> ERROR: Held by process 18522
Fix this and reduce the chance of race conditions in signal handlers by:
* Unhooking all traps in both clean_up() and trap_exit().
* Call clean_up() explicitly in trap_exit() to make sure we remove the
lock file and the temporary directory even if we send SIGINT when
clean_up() is already being executed but didn't reach the unhook code
yet.
Also, add an optional parameter to clean_up() to allow for setting an
explicit exit code when we call clean_up() from trap_exit().
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
When creating a repo outside the current directory, the signature
symlink was not created.
Reported-by: Gaetan Bisson <bisson@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The use of warning once we had already started adding a package was
confusing as it broke the standard indent pattern. It was especially bad
if adding multiple packages as it wasn't clear what sub-messages applied
to which package being added. This should be an output change only from:
==> Adding package '/tmp/sync/netcfg-2.6.7-1-any.pkg.tar.xz'
-> Computing checksums...
-> Adding package signature...
==> WARNING: An entry for 'netcfg-2.6.7-1' already existed
-> Removing existing entry 'netcfg-2.6.7-1'...
-> Creating 'desc' db entry...
-> Creating 'depends' db entry...
to:
==> Adding package '/tmp/sync/netcfg-2.6.7-1-any.pkg.tar.xz'
==> WARNING: An entry for 'netcfg-2.6.7-1' already existed
-> Computing checksums...
-> Adding package signature...
-> Removing existing entry 'netcfg-2.6.7-1'...
-> Creating 'desc' db entry...
-> Creating 'depends' db entry...
Signed-off-by: Dan McGee <dan@archlinux.org>
When adding a package to a repo, it is useful to be able to see
that repo-add has indeed found the signature file.
[Dan: update text to be more in line with other messages]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The full path to the signature file when it is created is in a temporary
directory so only print the filename.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This prevents a dangling symlink being left behind if the repo goes
from being signed to unsigned.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This adds the '.tar.Z' option to both repo-add and makepkg for no other
reason than "why not", and because bsdtar supports it natively with the
'-Z' flag. Also update the documentation accordingly.
Signed-off-by: Dan McGee <dan@archlinux.org>
If you are keeping a copy of the old database, you probably want
to keep a copy of its signature too. Also, delete the previously
backed-up database signature if no new one is being copied.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
vim recognises what type of shell script it's dealing with by looking at
the shebang. If detection fails it falls back to sh which doesn't
support some bash features. Adding a normal, possibly broken, shebang
which gets fixed by the Makefile allows vim to detect bash syntax.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Dan McGee <dan@archlinux.org>
Revert to the old behavior that 6f5a90 attempted to simplify and go with
the original proposed solution of using "ugly" bash to detect empty
directories.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
We fubar-ed this pretty good.
1. The whole old/new move shuffle was totally busted if you used a
relative path to your database, as we would just build the database in
place.
2. Our prior temp directory layout had the database files extracted
directly into it. When we tried to create a xxx.db.tar.gz file in this
same directory, due to the fact that we were no longer using a shell
wildcard, we tried to include the db in ourself, which is a big failure.
Fix all this by extracting to tree/ so we can have a clean top-level
temp directory.
3. Fix the inclusion of the './' directory entry; ensure the regex
prunes both leading paths of '.' as well as './'.
Where is that test suite again?
Signed-off-by: Dan McGee <dan@archlinux.org>
Allow one of 4 archive extensions: .tar{,.gz,.xz,.bz2} for each of the 2
valid repo extensions: .db and .files. Check for this via
'verify_repo_extension' directly after option parsing to assert that
this extension is present, and again after files have been added to get
the proper archive option for bsdtar.
Signed-off-by: Dave Reisner <d@falconindy.com>
Dump the whole conditional and filter the contents of the directory to
create an empty or non-empty archive.
Signed-off-by: Dave Reisner <d@falconindy.com>
Fixes FS#24893.
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This ranks high on the code readability scale. The same function formats
all of our data and writes to the metadata file at once.
Signed-off-by: Dave Reisner <d@falconindy.com>
Fields like groups and depends should be stored as arrays. This requires
rewriting our write_list_entry function to accomodate our new data type.
This new function will not write to a file, but rather only format it.
Signed-off-by: Dave Reisner <d@falconindy.com>
grep and sed aren't needed here, and this removes the truly ugly
manipulation of IFS. The process substituion could just as well be a
herestring, but it breaks vim's syntax highlighting. Style over
substance, mang.
Signed-off-by: Dave Reisner <d@falconindy.com>
Allan McRae