That function wasn't big, but this might be useful
for later refactoring of the search for satisfier code.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
The _alpm_sortbydeps function has two main part :
1) initialization of the graph structure
2) the sorting itself
So it didn't seem bad to move the first part to a second function.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
.gitignore works recursively, so we don't need Makefile and Makefile.in
in all of the subdirectory .gitignore files.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a full refactoring of _alpm_add_commit into multiple functions and a
better layout for later. Some highlights:
* No regressions in pactest performance.
* Much cleaner layout. add_commit is split into four functions:
upgrade_remove, extract_single_file, commit_single_pkg, _alpm_add_commit
* No more super-functions, the heaviest (extract_single_file) is finally
under 400 lines, with much improved commenting as well.
* Incorporation of Andrew Fyfe's ideas for fixing FS #7484. Try to handle
all possible cases of extraction combinations with files, symlinks, dirs,
and non-existant entries on the filesystem. This should make our dealings
with libarchive fall more into our control.
Signed-off-by: Dan McGee <dan@archlinux.org>
This replaces the former -D operation that was undocumented and rather
hacky. It can be used with add, upgrade, or sync transactions and will affect
all packages installed. Should close FS #7193.
Also tell makepkg to use this new flag.
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes the failure of the requiredby004 pactest in a not so pretty way,
but it gets the job done. I purposely used the extremely long name of
PM_TRANS_TYPE_REMOVEUPGRADE to be both clear and in the hope that someone
else will figure out a better solution.
Original idea from Nagy Gabor, patch updated and cleaned for current code.
Signed-off-by: Dan McGee <dan@archlinux.org>
remove _alpm_ldconfig call from _alpm_sync_commit,
since sync operation causes an upgrade transaction,
where ldconfig is already run.
Reference:
http://www.archlinux.org/pipermail/pacman-dev/2007-April/008132.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
In 1c9f30b9fa
This change should be done AFTER the TODO in recursedeps is implemented.
Then we'll be able to first sort the list, then call recursedeps which keeps
it sorted. For now, the sorting should still be done as the last step.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Patch from Nagy that makes removedeps use alpm_depcmp.
I also renamed removedeps to recursedeps, as it can have
a more general usage, and added an include_explicit argument,
so we can control if packages explictly installed are added or not.
Note: Small changes made by me (Dan) as well- mostly some English grammar
correction and a few other cleanups.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently the d (nodeps) option skips the s (recursive) part,
rendering the Rsd combination totally useless.
This patch makes a recursive removal still possible using the nodeps option,
as Romashka asked there :
http://bugs.archlinux.org/task/6057#comment17784
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Remove versioncmp.c by moving all functions to locations that make sense.
Move replacement functions (for building without glibc) into util.c where
they belong, and do proper checks for them instead of using __sun__, etc.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove unused buildtype field from pmpkg_t struct and anything associated
with it, as it is unused at the moment. If we need to readd it, it is an
easy revert of this commit.
Signed-off-by: Dan McGee <dan@archlinux.org>
The three chk_ functions overlap for packages both in targets and in the
database. This caused the same conflict to be found in both direction
(A conflicts with B, and B conflicts with A).
This patch avoids this duplication. which shouldn't be needed, but other
changes might be required for that to work correctly.
This also has the unexpected side effect to hide the failure of sync022
pactest, for FS #7415. That's maybe not a good thing though..
Note from Dan: sync022 does succeed, but a sync023 pactest added to check
regressions also seems to pass. This may be a valid fix to this 'problem'
sync022 was meant to find.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Because of this commit:
ea1fef69ad
we lost a lot of gettext-ized messages on the libalpm side. Remove them
in order to clean out these files a bit.
Signed-off-by: Dan McGee <dan@archlinux.org>
There is no real reason to burden our translators with these messages, as
anyone helping to debug these will probably want them in English.
Signed-off-by: Dan McGee <dan@archlinux.org>
We shouldn't translate log messages to pacman.log so it is consistant and
can be parsed by other tools. Remove all gettext _() around these strings.
Signed-off-by: Dan McGee <dan@archlinux.org>
Move the translations from src/pacman/po to just po/ so we can include the
scripts gettext translations in the same message catalog as that of the
pacman frontend. The libalpm message catalog, for now, will remain a separate
existence.
Signed-off-by: Dan McGee <dan@archlinux.org>
I ran flawfinder and sparse over the pacman source code and found a few
things that were worth fixing (and were quick fixes).
Signed-off-by: Dan McGee <dan@archlinux.org>
Adds the ARCHIVE_EXTRACT_NO_OVERWRITE libarchive flags
for extracting files and directories.
This will prevent symlinks for being overwritten by directories.
All other files that need to be extracted should already have
been deleted previously by pacman.
This flag is not used for extracting files in backup array
to /tmp/alpm_XXXX, because this file is created by mkstemp first,
and so needs to be overwritten by the file from the archive.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
With libarchive 2.2.3 (previously 1.3.1), archive_read_extract now returns ARCHIVE_WARN
when a package is extracted as user, because for example, UID=0 or SUID bit can't be set.
This patch makes pacman not treating these warnings as errors anymore,
but simply ignoring them.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
I previously introduced some patches to make just about every path in
pacman/libalpm configurable; doing this with the lockfile seemed a bit too
far and we really should just place the lockfile where it belongs- with the
DB that needs locking.
More details in this thread:
http://archlinux.org/pipermail/pacman-dev/2007-June/008499.html
Signed-off-by: Dan McGee <dan@archlinux.org>
The scriptlet calling had some unneeded complexity for the time being
which we aren't using here. Let's get rid of it until we find a good way
to implement it correctly.
Signed-off-by: Dan McGee <dan@archlinux.org>
First reported here:
http://bbs.archlinux.org/viewtopic.php?pid=261861
Newly created files were done with the standard umask, so those that are
extracted seperately and copied to a .pacnew extension will have the wrong
permissions. This should hopefully fix this.
Signed-off-by: Dan McGee <dan@archlinux.org>
The alpm_splitdep function formerly overwrote the input string, causing
a few issues. Fix this.
Signed-off-by: Nagy Gabor <ngaba@petra.hos.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
For future possibilities, don't extract any files that start with '.'.
This will allow us to add features such as the ChangeLog viewing without
having to wait to include these files in packages, because older versions
of pacman will be forward compatable with 'hidden' files at the root level
of the package.
Signed-off-by: Dan McGee <dan@archlinux.org>
This was a bad way to fix a problem upstream. Doing this resulted in
symlink permissions being applied to files installed on the system, leaving
some binaries with 77 permission, etc.
This reverts commit 4e6b7c1cde.
This function is an absolute disaster, so we'll take it one step at a time
here. This was a quick once-over of the whole thing, trying to straighten
out some of the spaghetti code and fix some mistakes that others found.
We are now down to two failing pactests again: sync300 and upgrade051.
Signed-off-by: Dan McGee <dan@archlinux.org>
