Before this, if you do pacman -Sy<tab> it completes to -y. Now, with -S
and the other operations in the actual option _arguments, it won't
remove the operations.
Signed-off-by: Daniel Wallace <danielwallace@gtmanfred.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Quoting output substitutions makes whitespace errors such as FS#30101
much more obvious:
old:
missing perl-test-pod dependency for perl-test-output
new:
missing 'perl-test-pod ' dependency for 'perl-test-output'
Several of the quoted substitutions should not be capable of containing
whitespace in theory, but this errs on the side of caution as the point
of the tool is to find error conditions.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Passing the local package list to alpm_checkdeps as both the local
packages and packages to be upgraded did nothing but cause extra
overhead as the packages were all removed from the installed package
list because they were being upgraded.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Several tests require complete file lists in order to provide accurate
results. These can be non-obvious. Adding missing parent directories
helps insure the integrity of tests against human error. Filling in
parent directories also allows us to check that file lists are actually
valid.
There didn't seem to be a good place to do this that was always
guaranteed to be run, so this adds a finalize() function to packages
that will always be run before the package is actually used to allow for
this type of tidying.
Fixes FS#30723
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Because --noextract also implies to not download/verify source files, it wasn't
possible to simply do that, without either extracting and/or building.
(Note: --verifysource takes precedence over --noextract)
Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Make all VCS download functions uses get_filename to get the repo name.
In addition, creating a working directory from a Bazaar repository now shows
the short-name of the repository, not the full path on disk.
I'm not sure if the name of the variable that holds the basename of the local
clone should still be `repo`, but I have left the variable name for simplicity.
Signed-off-by: Neer Sighted <neersighted@myopera.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Previously makepkg would clone vcs sources in the download function,
regardless of the noextract settings. Now the download_* functions only
download or update the vcs sources, and the new extract_* functions just
create working copies using the specified protocols. The extract_sources
function will call the needed extract function for the protocol
specified. The tarball extraction has also been moved into its own
extract_file function to keep things consistent.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Currently pacman either prints 'adding' or 'upgrading' when installing
a package. This make pacman print and log the other possible actions:
'downgrade' and 'reinstall'
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
This also rearranges some code to ensure that declarations and code
aren't mixed.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Added an `ask` message function that emulates pacman's appearance.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Color enabled by default, use --nocolor to disable colored output.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Use --nocolor to suppress colored output from pacman-key, otherwise
output will be in color.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Color enabled by default, use --nocolor to turn off colors.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Use the same colors as makepkg in messages. Add in the 'plain' function
as well.
To use the colors, you need to include the term_colors.sh file, or add
definitions for the colors explicitly.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
colstr_t colstr will hold the colourizing agents.
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Colours can be enabled in two ways:
- Add Color to pacman.conf. This enables colours automatically.
- Use --color=WHEN where WHEN is none/auto/always.
WHEN as 'never' disables colours (overrides config file), as 'auto'
enables colours when stdout is a tty, and 'always' enables colours no
matter what.
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Remove the format component of the "Total Download Size" and related
messages. The heading will be colourized, the size won't.
However since the length of these messages can vary by language, we need
a pretty printer to format them nicely.
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Basically all translation messages that need colouring but _also_ happen
to be format strings need to be split up.
This makes it easy to conditionally embed colour codes into the output
at runtime.
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
This will substantially simplify the logic to add colours to messages.
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Make makepkg use a recursive clone when creating the working directory.
This will initialize submodules
Signed-off-by: Allan McRae <allan@archlinux.org>
Since 882bff36 literals would be searched before replacers, resulting in a
package being replaced by another not actually being replaced under certain
conditions (e.g. they're both in the same repo).
This change effectively reversed the expectations in test sync132. This patch
switches the order back to replacers first, thus making sure if a package is
replacing another one, the change will always happen, even if both are in the
same repo.
Note that a package replacing another one in a repo with higher priority will
not be done, see FS#11737 and test sync1105
Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
During a sysupgrade, if a package is replaced by another, and an update for the
former package is found (on another repo) the replaced package would be
re-installed.
Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Although technically correct, this results in my system taking ~30 seconds
to resolve all filelists when removing a package that has a directory not
owned by any package. The check for if any package own the empty directory
is a rare enough occurance, and it will be even rarer when that directory
has a directory symlink in its path, so just revert this at this stage.
Signed-off-by: Allan McRae <allan@archlinux.org>
alpm_filelist_contains is listed in alpm.h and should be public but was
not exported.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Fix FS#31556 by printing filename instead of entryname. Thus,
removing a lot of confusion from the output.
Signed-off-by: Allan McRae <allan@archlinux.org>
This removes the restriction on the length of the command line, as xargs
will work around by running multiple instances of the command for us.
As seen: https://bbs.archlinux.org/viewtopic.php?pid=1232959
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Pacman currently bails when trying to extract a file over a directory
when using --force. Instead of ignoring all conflict, perform the
check and skip any file-file conflicts. Conflicts between directories
and files are still flagged and cause the transation to abort.
As a bonus, we now know about files changing packages when using
--force, so we can skip removing them fixing upgrade046.
Signed-off-by: Allan McRae <allan@archlinux.org>
