Follow-up to the previous "Only extract new DB entries" patch; move the
partial extraction code inside one side of the loop so we can use the same
code for actually doing file extraction.
Signed-off-by: Dan McGee <dan@archlinux.org>
This implements FS#15198. The idea apparently came from Csaba Henk
<csaba-ml <at> creo.hu> which submitted a patch to Frugalware, so thanks to
him, even though I did not look at the code :)
The idea is to only extract folders for new packages into the package
database and clean up the old directories. This is essentially implementing
Xyne's "rebase" script within pacman.
If using -Syy, just remove and extract everything.
If using -Sy :
1. Generate list of directories in DB
2. Generate list of directories in archive
3. Compare both
4. Clean up old directories
5. Extract new directories
Original-work-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
[Dan: fix compile error, s/int/size_t/]
Signed-off-by: Dan McGee <dan@archlinux.org>
And a new --print-format option to configure the output.
This implements FS#14208
Example usage :
pacman -Sp --print-format "%r/%n-%v : %l [%s]" kdelibs
extra/kdelibs-4.3.2-4 : ftp://mir2.archlinuxfr.org/archlinux/extra/os/i686/kdelibs-4.3.2-4-i686.pkg.tar.gz [0,00]
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes FS#17523
We always used a fixed value of 50 for textlen, which is often not enough
for download progress bar. At least we can use a bigger width on large
terminal (e.g. 60% of width) and keep 50 as minimum.
before:
nautilus-2.28.4-1-x... 5.7M 789.2K/s 00:00:07 [####################################] 100%
after:
nautilus-2.28.4-1-x86_64 5.7M 770.7K/s 00:00:08 [##############################] 100%
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
1 - Explain magic numbers
2 - There was a weird off by 1 mess in the progress bar. The code supposedly
shared the width between 50 chars for text (textlen) and the rest for the
progress bar (proglen = getcols() - textlen).
But the code actually used textlen + 1 for the text and proglen - 1 for the
progress bar (with haslen=1, the progress bar was actually empty), which was
a bit confusing so I changed it.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
When a man page has both symbolic and hard links, any symlink pointing
to other than the alphabetically first hardlink was not "compressed"
and left dangling towards the uncompressed man page. Fixes FS#18569.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The newly added variables STRIP_BINARIES, STRIP_SHARED and STRIP_STATIC,
that are set in makepkg.conf, specify the strip options used on binaries
and shared and static libraries.
In addition, files are now stripped more aggressively by default.
Implements FS#13592 the way it was suggested by Allan in the comments.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
It was noted in FS#17533 that setgid bits are carried down into any created
subdirectories, and thus could end up being in a built package if the
original package directory was marked g+s. When we create src/ and pkg/,
explicitly chmod them to remove any sticky bits.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
When PKGDEST pointed to a non-writable location, makepkg would fail
after completing the build process. This patch makes it abort as
soon as PKGDEST is parsed.
Also, move the SRCDEST check to the same point rather than right
before downloading sources (which was after dependency checks).
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The location of the used utilities may and does differ between various
distributions and therefore absolute paths do not work well. Since the
main purpose of its introduction was to avoid side-effects caused by
aliases, it is sufficient to disable possible aliases temporarily by
preceding the commands with a backslash.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Dan McGee <dan@archlinux.org>
When using --downloadonly the "Total Installed Size" message is not
needed and perhaps misleading.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The "local database is up to date" message has been replaced with "there
is nothing to do" message. This used with "empty" -S, -R, -U operations too.
(Examples: pacman -S ignored_pkg, pacman -Ru needed_pkg.)
See FS#17859.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
Fixes issues noted in FS#16630.
Signed-off-by: Dan McGee <dan@archlinux.org>
(cherry picked from commit 03f35b1432)
Signed-off-by: Dan McGee <dan@archlinux.org>
The source command triggers / might trigger the ERR trap which makes
makepkg abort right after a successful installation of missing
dependencies.
Thanks to Xavier Chantry <shiningxc@gmail.com> for finding this
solution.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
(cherry picked from commit 77e84bea71)
Signed-off-by: Dan McGee <dan@archlinux.org>
Fixes FS#17140.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
(cherry picked from commit 0199a7ee71)
Signed-off-by: Dan McGee <dan@archlinux.org>
We free'd the handle but didn't NULL out the global variable, leading to
problems if you try to reinitialize the library. Make sure we clean up after
ourselves.
Signed-off-by: Dan McGee <dan@archlinux.org>
Introduce $SRCPKGDEST to define a destination dir for source packages
instead of saving them in $PKGDEST with binary packages.
The simple patch doesn't break old behavior.
Signed-off-by: Nezmer <git@nezmer.info>
Signed-off-by: Dan McGee <dan@archlinux.org>
pkgbase is used in the following rm calls, and since pkgname can be
present when pkgbase is not, it is safer to check for pkgbase.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When makepkg exits in create_srcpackage(), the (temporary) srclinks
directory is left behind.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Currently, "makepkg -R" creates a package with a wrong updated $pkgver.
Signed-off-by: Nezmer <Nezmer@allurelinux.org>
[Allan: adjusted comment]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is particularly useful when using pacman wrappers which call sudo
by themselves and therefore should not be run as root.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
If PACMAN environment variable is set, makepkg will try to use this
command to check for installed dependencies and to install or remove
packages. Otherwise, makepkg will fall back to pacman.
Implements FS#13028.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
[Dan: move envvar section in manpage]
Signed-off-by: Dan McGee <dan@archlinux.org>
Add a check that the package does not contain references to the
folder it was built in.
Fixes FS#14751
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
download_internal is supposed to always set pm_errno but did not in many
cases.
The most important (and tested) change is the one concerning fetchStat. This
is typically where the code will fail when the network is down for example.
Before commit d2dbb04a9a, this fetchStat call did not exist and the
same kind of errors would be encountered in the fetchXGet call that follows.
I just copied the error printing to restore the old behavior.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
getopt should already ensure that optarg is not NULL when an argument is
required, but just be extra safe and double check it before using optarg.
To be honest, I only did that to make clang shut up and eliminate the last
warnings it reported.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This function was quite huge (~230 lines) and difficult to parse, now it is
slightly better.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Some users reported duplicated database entries in /var/lib/pacman/local/,
for example, both foo-1.0-1 and foo-2.0-1 subdirectories existed. (Bogus
3rd-party scripts, backup?) In this case pacman reported no error and its
behaviour was mysterious.
From now on, pacman detects this situation and prints an error message.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
This ensures we never have trailing whitespace. Take the following text,
with line numbers added for clarity:
1. Title : item1 item2 item3 item4
2. item5 item6 item7 item8
3. item9 itemA itemB itemC
Laszlo Papp helpfully pointed out we would have two trailing spaces on line
three after the last item. However, we also had these trailing spaces on
lines one and two, which the initial patch didn't take care of. This can be
seen on something like `pacman -Qi glibc`.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a bit embarrassing. For example:
$ pacman -Qi mesa
...
Required By : mesa mesa mesa mesa mesa mesa
Something is clearly not right, and the problem was introduced in commit
0bc961. Fix the issue by getting the package name off the correct variable.
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows makepkg to only build a specified subset of packages
from a split PKGBUILD. This is very useful in combination with the
-R flag or when bumping the pkgrel of a single package.
Fixes FS#15956.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When PKGDEST is used, symlinks to the packages will be put in the build
directory. This combines the convenience of a global package cache with
the ease of having a package (i.e. a symlink) in the build directory for
testing and installation purpose.
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
[Allan: add comment documenting clean-up addition]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Sorry for this being such a huge patch, but I believe it is necessary for
quite a few reasons which I will attempt to explain herein. I've been
mulling this over for a while, but wasn't super happy with making the
download interface more complex. Instead, if we carefully order things in
the internal download code, we can actually make the interface simpler.
1. FS#15657 - This involves `name.db.tar.gz.part` files being left around the
filesystem, and then causing all sorts of issues when someone attempts to
rerun the operation they canceled. We need to ensure that if we resume a
download, we are resuming it on exactly the same file; if we cannot be
almost postive of that then we need to start over.
2. http://www.mail-archive.com/pacman-dev@archlinux.org/msg03536.html - Here
we have a lighttpd bug to ruin the day. If we send both a Range: header and
If-Modified-Since: header across the wire in a GET request, lighttpd doesn't
do what we want in several cases. If the file hadn't been modified, it
returns a '304 Not Modified' instead of a '206 Partial Content'. We need to
do a stat (e.g. HEAD in HTTP terms) operation here, and the proceed
accordingly based off the values we get back from it.
3. The mtime stuff was rather ugly, and relied on the called function to
write back to a passed in reference, which isn't the greatest. Instead, use
the power of the filesystem to contain this info. Every file downloaded
internally is now carefully timestamped with the remote file time. This
should allow the resume logic to work. In order to guarantee this, we need
to implement a signal handler that catches interrupts, notifies the running
code, and causes it to set the mtimes on the file. It then rethrows the
signal so the pacman signal handler (or any frontend) works as expected.
4. We did a lot of funky stuff in trying to track the DB last modified time.
It is a lot easier to just keep the downloaded DB file around and track the
time on that rather than in a funky dot file. It also kills a lot of code.
5. For GPG verification of the databases down the road, we are going to need
the DB file around for at least a short bit of time anyway, so this gets us
closer to that.
Signed-off-by: Dan McGee <dan@archlinux.org>
[Xav: fixed printf with off_t]
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
* It makes the code clearer to read/understand
* Cppcheck tool doesn't show this anymore: [./util.c:215]: (error) Resource leak: fd
[Dan: don't change the coding style]
Signed-off-by: Dan McGee <dan@archlinux.org>
For some packages, generally the 'any' arch ones, a build step is not
required and therefore can be skipped. In these cases, a package()
function without a build() one is sufficient.
As a side effect, this commit makes meta packages without any function
at all in the PKGBUILD possible.
Fixes FS#15147.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
