None of these warn at the normal "-Wall -Werror" level, but casts do occur
that we are fine with. Make them explicit to silence some warnings when
using "-Wconversion".
Signed-off-by: Dan McGee <dan@archlinux.org>
We were including the header in a lot of places it is no longer used.
Additionally, use the correct autoconf macro for determining whether
d_type is available as a member: HAVE_STRUCT_DIRENT_D_TYPE.
Signed-off-by: Dan McGee <dan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
The splitname function is a general utility function and so is better
suited to util.h. Rename it to _alpm_splitname to indicate it is an
internal libalpm function as was the case prior to splitting local and
sync db handling.
Signed-off-by: Allan McRae <allan@archlinux.org>
These functions are only needed by be_local and were only promoted
to db.{h,c} as part of the splitting of handling the local and sync
dbs. Move them into be_local.c and make them static again.
Signed-off-by: Allan McRae <allan@archlinux.org>
Read in list of packages for sync db from tar archive.
Breaks reading in _alpm_sync_db_read and a lot of pactests (which
is expected as they do not handle sync db in archives...).
Signed-off-by: Allan McRae <allan@archlinux.org>
Put the db_operations struct to use and completely split the handling
of the sync and local databases.
Signed-off-by: Allan McRae <allan@archlinux.org>
The file be_files.c is "split" to be_local.c and be_sync.c in order
to achieve separate handling of sync and local databases.
Some basic clean-up of functions that are only of use for local or
sync databases has been performed and some rough function renaming
in duplicated code has been performed to prevent compilation errors.
However, most of the clean-up and final separation of sync and local
db handling occurs in following patches.
Signed-off-by: Allan McRae <allan@archlinux.org>
These will be needed for the handling of both local and sync database
caches, so put them in a common location.
Signed-off-by: Allan McRae <allan@archlinux.org>
Move splitname, checkdbdir, get_pkgpath into db.{h,c} as these will be
needed to parse both the local and sync databases during the initial
splitting. They will be moved out of db.{h,c} at to more appropriate
locations at a later stage.
Signed-off-by: Allan McRae <allan@archlinux.org>
It doesn't do a whole lot yet, but these type of operations will
potentially be different for the DBs we load.
Signed-off-by: Dan McGee <dan@archlinux.org>
Cache bullshit only has relevance to be_files, so move it there.
Signed-off-by: Dan McGee <dan@archlinux.org>
[Allan: BIG rebase]
Signed-off-by: Allan McRae <allan@archlinux.org>
The request of FS#12950 is implemented.
On the backend side, I introduced a new function, alpm_db_set_pkgreason(),
to modify the install reason of a package in the local database. On the
front-end side, I introduced a new main operation, -D/--database, which has
two options, --asdeps and --asexplicit. I documented this in pacman manual.
I've created two pactests to test -D: database001.py and database002.py.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
After our recent screwup with size_t and ssize_t in the download code, I
found the `-Wsign-conversion` flag to GCC to see if we were doing anything
else boneheaded. I didn't find anything quite as bad, but we did have some
goofups- most of our public unsigned methods would return -1 on error, which
is a bit odd in an unsigned context.
Signed-off-by: Dan McGee <dan@archlinux.org>
Commit 34e1413d75 attempted to implement lazy loading of package databases.
Although it took care of my main complaint (creating the database directory
if it didn't exist), it didn't allow sync repos to be registered before
alpm_option_set_dbpath() had been called.
With this patch, we no longer compute the individual repository DB paths
until necessary, allowing full lazy loading to work as intended, and
allowing us to drop the extra setlibpath() calls from the frontend. This
allows the changes introduced in a2cd48960 (but later reverted) to be added
back in again.
Signed-off-by: Dan McGee <dan@archlinux.org>
See FS#13099. This makes sense especially for the pacman frontend, as we
show groups in the search output.
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes FS#14899. When running an -Sp operation without servers
configured for a repository, we would segfault, so add an assert to the
backend method returning the first server preventing a null pointer
dereference.
In addition, add a new error code to libalpm that indicates we have no
servers configured for a repository. This makes -Sy and -S <package>
operations fail gracefully and helpfully when a repo is set up with no
servers, as the default mirrorlist in Arch is provided this way.
Signed-off-by: Dan McGee <dan@archlinux.org>
We don't need to create the directories when local or sync dbs are
registered. For example, if a sync db does not exist, we cannot even do
"pacman -Q" as an user.
Instead, we can create the local db if needed during the db_prepare
operation, and sync dbs on db_update.
Also remove some more useless abstractions in db_update and switch to a much
more efficient way to remove a sync db : rm -rf.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
These db_open and db_close looked quite useless. And they caused the db
directory to be opened on a simple registering of a database. This is
totally unneeded, this opening can be delayed to when we actually need it.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
This is more consistent with the private functions :
_alpm_db_get_{pkg,grp}cache
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
When this function got a rewrite in commit f43805d875, argument and variable
names got a bit mixed up when separating the casts from the strcmp
operation. Fix the mixup which also fixes a possible segfault when this
function is called.
Signed-off-by: Dan McGee <dan@archlinux.org>
If a Server specified in pacman.conf had a trailing slash, libalpm ended up
building URLs with double slashes, and this broke libdownload with errors
like the following one :
error: failed retrieving file 'redland-1.0.8-1-i686.pkg.tar.gz'
from 192.168.0.90 : Command okay
So the public function alpm_db_set_server will make sure to remove the
trailing slash of servers. For the private function
_alpm_download_single_file, I only added a comment.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This fixes FS#2334.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
[Dan: add some comments to the code]
Signed-off-by: Dan McGee <dan@archlinux.org>
We have been using unsigned long as a file size type for a while, which
works but isn't quite correct and could easily break. Worse was probably our
use of int in the download callback functions, which could be restrictive
for packages > 2GB in size.
Switch all file size variables to use off_t, which is the preferred type for
file sizes. Note that at least on Linux, all applications compiled against
libalpm must now be sure to use large file support, where _FILE_OFFSET_BITS
is defined to be 64 or there will be some weird issues that crop up.
Signed-off-by: Dan McGee <dan@archlinux.org>
* remove obsolete and unused *_cmp helper functions like deppkg_cmp and
_alpm_grp_cmp
* new alpm_list_remove_str function, used 6 times in handle.c
* remove _alpm_prov_cmp / _alpm_db_whatprovides and replace them by
a more general alpm_find_pkg_satisfiers with a cleaner implementation.
before: alpm_db_whatprovides(db, targ)
after: alpm_find_pkg_satisfiers(alpm_db_getpkgcache(db), targ)
* remove satisfycmp and replace alpm_list_find + satisfycmp usage by
_alpm_find_dep_satisfiers.
before : alpm_list_find(_alpm_db_get_pkgcache(db), dep, satisfycmp)
after : _alpm_find_dep_satisfiers(_alpm_db_get_pkgcache(db), dep)
* remove _alpm_pkgname_pkg_cmp, which was used with alpm_list_remove, and
use _alpm_pkg_find + alpm_list_remove with _alpm_pkg_cmp instead.
This commit actually get rids of all complicated and asymmetric _cmp
functions. I first thought these functions were worth it, be caused it
allowed us to reuse list_find and list_remove. But this was at the detriment
of the clarity and also the ease of use of these functions, dangerous
because of their asymmetricity.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
We have some useless abstractions like an alpm_db_rewind function. I've read
somewhere that readdir() was the worst filesystem function call invented,
and what do we do? Add a wrapper around it. Kill this abstraction and move
some other things into be_files that should be there anyway because they
are so tied to how a files backend works.
Signed-off-by: Dan McGee <dan@archlinux.org>
This will reduce the need for running an -Syy if the DB was only
half-extracted, as the mtime won't get updated until the new database is
completely in place.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove what was a pretty weird abstraction in the libalpm backend. Instead
of parsing server URLs as we get them (of which we don't usually use more
than a handful anyway), wait until they are actually used, which allows us
to store them as a simple string list instead. This allows us to remove a
lot of code, and will greatly simplify the continuing refactoring of the
download code.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add new stub functions that work by calling the existing (terrible) download
forreal function, which needs a serious overhaul. Hide the existing
functions and switch all former users to the new functions.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is the first in what will be a series of patches to clean up the
current download code in libalpm. Start by moving download code out of
server.c and into download.c.
Signed-off-by: Dan McGee <dan@archlinux.org>
Change the 'provname provver' format to 'provname=provver'.
In .PKGINFO, the provisions are copied from the PKGBUILD without quotes. So
the provision version was actually handled as a different provision...
See FS#9171.
Dan: Unfortunately we have to change our original specification for
versioned provisions with this patch, but it ends up being the simpler and
cleaner solution in the long run, and if there is any time to change it the
time is now before many packages have been built. Keeping the ' ' based
format would have required us to do special parsing in repo-add, as well as
being susceptible to users not using quotes in their provides array.
Hopefully this will resolve the issues we had with our initial plan. Sorry
for the confusion.
Acked-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This also affects all structures with static strings, such as depmiss,
conflict, etc. This should help a lot with memory usage, and hopefully make
things a bit more "idiot proof".
Currently our pactest pass/fail rate is identical before and after this
patch. This is not to say it is a perfect patch- I have yet to pull valgrind
out. However, this should be quite safe to use in all situations from here
on out, and we can start plugging the memleaks.
Original-work-by: Aaron Griffin <aaronmgriffin@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
Update the GPL boilerplate to direct people to the GNU website for a copy of
the license, as well as bump all of Judd's copyrights to 2007.
Signed-off-by: Dan McGee <dan@archlinux.org>
This closes out FS#6500 and covers cases where the package names contain regex
characters (i.e. the case of dvd+rw-tools)
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
The alpm_get_upgrades was exactly the same as find_replacements +
_alpm_sync_sysupgrade, except that it automatically made the eventual
replacements, without asking the user : Replace %s with %s/%s? [Y/n]
The replace question, asked in find_replacements. can now be skipped by
using a NULL trans argument, so that we get the same behavior as with
alpm_get_upgrades.
So alpm_db_get_upgrades() can now be replaced by
alpm_sync_sysupgrade(db_local, syncdbs).
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This patch introduces versioned provisions in "provision 1.0-1" format.
_alpm_db_whatprovides was modified accordingly (added sync500.py),
alpm_depcmp was modified accordingly (add043.py passes now; added add044.py
and add045.py).
Notes:
alpm_db_search now uses the whole versioned %PROVIDES% string in its search.
debug logging was simplified in alpm_depcmp.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Xavier: fixed a few typos, duplicate const strings with strdup before
modifying them, put some debugging back in alpm_depcmp, minor code cleanups
(var/function renaming), added a note in PKGBUILD man page.]
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: made strcmp checks clearer, added a comment]
Signed-off-by: Dan McGee <dan@archlinux.org>
And check the IgnorePkg handling is done correctly in the other places.
For example, -Qu and -Su will automatically skip the ignored packages (-Su will print a warning),
but -S will install ignored packages anyway, because it was asked explicitly.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
This file only contained one private function : _alpm_db_whatprovides .
And the public alpm_db_whatprovides was in db.c , so I moved everything there.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: updated POTFILES.in as well]
Signed-off-by: Dan McGee <dan@archlinux.org>
The old alpm_list_find was renamed to alpm_list_find_ptr, and a new
alpm_list_find was introduced, which uses the fn comparison-function
parameter in its decision.
Now both alpm_list_find_ptr (a new ptrcmp helper function was also
added) and alpm_list_find_str are just an alpm_list_find call.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: made ptrcmp a static function]
Signed-off-by: Dan McGee <dan@archlinux.org>
Legacy code is hitting the trash here. Remove unnecessary _alpm_time2string
time storage abstraction in favor of just writing the time_t value to the
disk.
The only drawback is that everyone's sync DBs will have to be updated at
least once so that the lastupdate values are stored right. :)
Signed-off-by: Dan McGee <dan@archlinux.org>
Instead of using the often-busted REQUIREDBY entries in the pacman database,
compute them each time they are required. This should help many things:
1. Simplify the codebase
2. Prevent future database corruption
3. Ensure when we do use requiredby, it is always correct
4. Shrink the pmpkg_t memory overhead
Signed-off-by: Dan McGee <dan@archlinux.org>
Setting this option will change the download progress to show the amount
downloaded, download rate, ETA, and download percent of the entire
download list rather than per each individual file.
The progress bar is still based on the completion of the current file
regardless if the TotalDownload option is set.
This closes FS#7205.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This option acts as if IgnorePkg was set on each package in the group.
This closes FS#1592.
Signed-off-by: Nathan Jones <nathanj@insightbb.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
These macros take the place of the common 4 or 5 line blocks of code we had
in most places that called malloc or calloc. This should reduce some code
duplication and make memory allocation more standard in libalpm.
Highlights:
* Note that the MALLOC macro actually uses calloc, this is just for safety
so that memory is initialized to 0. This can be easily changed in one
place.
* One malloc call was completely eliminated- it made more sense to do it
on the stack.
* The use of RET_ERR in public functions (mainly the alpm_*_new functions)
was standardized, this makes sense so pm_errno is set.
Signed-off-by: Dan McGee <dan@archlinux.org>
My two previous hacks related to this part
(8038190c7c and
b15a5194d1) were caused by the lack of
understanding of a feature introduced a while ago:
Better control over CTRL-C interruptions -- do not leave the DB in an
inconsistent state (54008798ef).
Now I have been looking at this commit, and the added feature is indeed
interesting. The main problem I had with it is that it does a rather
unusual use of alpm_trans_release, which caused a few problems that I tried
to fix in a weird way. I think these problems were caused by the fact that
there weren't any difference between "interrupt transaction" and "release a
transaction which failed" actions from the alpm_trans_release POV. So I
decided to add a new function instead, alpm_trans_interrupt, which is
called on Ctrl+C, and which only sets trans->state to STATE_INTERRUPTED so
that remove_commit and add_commit can exit cleanly at a safe moment. This
allowed me to revert my two previous hacks as well.
Also ensure we handle SIGINT correctly in all cases- if a transaction is
not ongoing, then we can free the transaction and exit quickly.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
This reverts commit dfc85cb5f5
and b6f3fe6957.
This DB check is already in testdb (among others).
Also testdb now uses the db path set at make time by default,
so specifying the db path is optional.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
One string in de.po differed pretty strongly with its translated version.
It may still be totally wrong as far as translations go, but it compiles
now. Get translater to check.
Also, ensure the proper dbpath gets set in the db when it's created.
Signed-off-by: Travis Willard <travis@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Introduce two new methods into the API - alpm_db_register_sync and
alpm_db_register_local, which replace the functionality of
alpm_db_register. db_register_local always returns the local DB, and
db_register_sync will always try to register a sync DB. This conceptually
separates the local DB from sync DBs in the code. Also updated the pacman
frontend to use the new functions. In addition, this changes the location
of all sync DBs in the filesystem from $DBPATH/$REPO to $DBPATH/sync/$REPO,
This removes the silly limitation that a sync DB couldn't be named 'local',
along with structurally separating sync DBs and the local DB in the
filesystem.
Signed-off-by: Travis Willard <travis@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This allows us to remove the hack in the frontend where we added a newline
to everything coming out of the pm_printf functions, and instead let the
developer put newlines where they want them. This should be the last hangover
of that auto-newline stuff.
Signed-off-by: Dan McGee <dan@archlinux.org>
A bunch of changes related to my first "real" install of pacman-git into
/usr/local and trying to use it.
* Shift some uses of free -> FREE in libalpm.
* Move stat and sanity checks of config paths into libalpm from the
config and argument parsing in pacman.c.
* Fix issue where dbpath still was not defined early enough due to its
requirement for being used in alpm_db_register. This should be rewritten
so it doesn't have this dependency, but this will work for now.
Signed-off-by: Dan McGee <dan@archlinux.org>
This basically moves the code from alpm_release, which was mostly about
unregistering all databases, to a safer alpm_db_unregister_all.
This allows to avoid modifying the dbs_sync list while iterating over it,
and and also prevent alpm_release from looping infinitely when a database
can't be unregistered.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
This prevents alpm_release to loop infinitely in case of
an interrupted transaction, where the database wasn't
unregistered.
alpm_release should probably also be fixed, as it can
still loop if db_unregister fails for another reason.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
There is no real reason to burden our translators with these messages, as
anyone helping to debug these will probably want them in English.
Signed-off-by: Dan McGee <dan@archlinux.org>
Add some 'const' keywords all over the code to make it a bit more strict on
what you can and can't do with data. This is especially important when we
return pointers to the pacman frontend- ideally this would always be
untouchable data.
Signed-off-by: Dan McGee <dan@archlinux.org>
The db variable was left unset when calling alpm_db_register, leading
to a failure to ever register a sync db. Also added a check to ensure
DBPath was set when trying to register a database.
Signed-off-by: Dan McGee <dan@archlinux.org>
Switch over to the new frontend parseconfig.
* Fix a few issues in parseconfig
* Remove unused callback upon database registration
* Remove conf file related errors from error.c/alpm.h
Signed-off-by: Dan McGee <dan@archlinux.org>
alpm.h is the only "publically viewable" file, so there is no reason to have
functions in alpm.c that belong in package.c, db.c, etc. Move the functions
where they belong and leave only the library init functions in alpm.c.
Signed-off-by: Dan McGee <dan@archlinux.org>
This change allows us to use all autoconf specified paths, most notably
$(localstatedir). It is quite a change and touches a lot of files, as
all references to the DB and cache were done with the ROOTDIR as a prefix.
* add --lock command-line option to pacman to specify the location of the
lockfile (this can now be specified at configure time by setting the
$localstatedir path).
* Rip quite a few settings out of configure.ac as they are now picked by
setting the paths during configure or make.
* Fix bug with /tmp fallback for sync downloads not working correctly
(related to root location, now the system tmp dir is used).
* Simplified the parameters to some libalpm functions, and added get/set
for the new lockfile option.
* Renamed several of the DEFS to names without the PM_ prefix.
Signed-off-by: Dan McGee <dan@archlinux.org>
Remove inclusion of libintl.h from all files, because we can do it once
in util.c where the _() macro is defined.
Signed-off-by: Dan McGee <dan@archlinux.org>
- Check EACCES in can_remove_file, to verify - we're only checking for a
read-only FS here... if write permissions fail, we can still remove it
- Switched the message when creating DB directories from an error to a debug
message
* Fix the dep tests once and for all (it wasn't working for provides=()
packages)
reordering and adding ones that were forgotten (noticed when trying to
compile after reordering).
* Updated the HACKING file to include information on #include usage.
* print -> vprint in "making dir" function in pactest.
specified
* Use db->path when appropriate
* Commented out the FAKEROOT checks in libalpm. This should never ever be done.
TODO test this quite a bit, as this will never cause the transactions to fail
if RW operations are requested... right now it is totally up to the front end
to decide when to fail
* Use realpath() to canonicalize the root path when specified, so
_alpm_makepath() doesn't freak out
* Fixed some output/indent of MDFile and SHAFile algorithms
* More efficient sprintf() usage in MDFile/SHAFile
* Added real error output to _alpm_makepath
* Moved entirely to alpm_pkg_get_* accessors, to read data on demand
* Mostly removed the INFRQ_ parameters from outside the be_files backend (making
the backend more extensible in the long run)
* packages created from _alpm_db_scan now have the db and origin set (making
accessors actually work for these packages)
* removed _alpm_db_ensure_pkgcache
* totally revamped the _alpm_checkconflicts function, making it cleaner and
easier to read (and thus fix in the long run) - maintainable code ftw
NOTE: feel free to rename the functions... I couldn't think of anything better
* removed an extra loop in sync.c:find_replacements - no sense in looping over
an entire DB while strcmp'ing the name, when we have get_pkgfromcache
Other:
* package struct "license" -> "licenses"
* Created _alpm_sync_find (duplicate code in some places, find_pkginsync
* Minor const correctness changes along the way
* fixed a couple extra '/' pathing issues (non-issues really)
* removed a duplicate pkg_cmp function
* Unified some functions names "package" -> "pkg" for consistency
* Removed the goofy 'faketarget' stuff used for dep testing
* Renamed alpm_pkg_isin -> alpm_pkg_find
* Renamed alpm_db_readpkg -> alpm_db_get_pkg
properly
* Error when re-reading the DB for replacements, wrong info level
* Removed an duplicate debug message "checking for package replacements"
* Check ignorepkg for REAL upgrades...
* Properly check the NOSAVE flag
* some unlink_file (remove.c) cleanup
* fix indent level on handle.c
* Force libalpm paths to end with a '/' char
* Fixed 'target' looping in conflict.c (pmsyncpkg_t, not pmpkg_t)
* Added some debug output to cache and db scanning
** All pactest tests succeed again, yay **
* The --debug params were goofy. New setup allows --debug without params,
--debug=<level> where level 1=debug output, 2=debug and download output,
3=debug, download, and function tracing output. This seems more sane to me.
* Removed PM_LOG_FLOW1 and PM_LOG_FLOW2. They were just confusing. When adding
new functions, it is near impossible to determin if your output should be
"flow1" or "flow2" without tracking all the way up the call chain. Rarely
would one ever say "ok, lets just show "flow2" output. These have both been
replaced with PM_LOG_DEBUG
* Removed the need for the root parameter on alpm_initialize. it is now
defaulted to PM_ROOT just like dbpath and cachedir. This allows alpm to be
initialized BEFORE option parsing in the front end, saving us some duplicate
variables in the frontend.
* Cleaned up front end variables due to early alpm_initialize call.
optimizations in order to make the code much more readable and
type-checkable. Every enum in the library now has it's own type that
should be used instead of the generic 'unsigned char'. In addition,
several #define statements dealing with constants were converted to
enums.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
* Fixed -Ss output so as not to call alpm_list_getdata with a NULl list
* Added a NULL check in alpm_list_getdata
* Fixed alpm_list_add_sorted to properly handle a new / beginning insertions
* renamed pmlist_t -> alpm_list_t
* made alpm_list_t a public type (alpm_list.h header)
* removed additional storage for registered DBs in pacman source
* some code cleanup
* removed duplicate (pm)list_display functions from pacman source
* misc code cleanup
* avoid repeated regex compilations (regex for search string do not
change while scanning the package database)
* remove needless string duplication (regex function do not change target
string nor free them)
* code cleanup
This patch improves search performance:
bash-3.2$ time ./src/pacman/pacman.static.old -Ss "(database|web).*server" >/dev/null
real 0m1.026s
user 0m0.544s
sys 0m0.208s
bash-3.2$ time ./src/pacman/pacman.static -Ss "(database|web).*server" >/dev/null
real 0m0.777s
user 0m0.456s
sys 0m0.128s
bash-3.2$
* libalpm api changes - move from a _getinfo(p, WHAT_WE_WANT) scheme to a
typesafe _get_what_we_want(p) scheme [not 100% complete yet]
* some const correctness changes
* removal of PM_* types in alpm.h in favor of the pm*_t types used throughout
libalpm
* Accidental database read of a file-based package (whoops)
* Proper fetching of url-based -U or -A
Removed some newlines from _alpm_log calls, to make debug output more concise
* Furthered the "lazy caching" to force the pkgcache to read nothing
(INFRQ_NONE) by default. Anything requiring package data should now check
the infolevel of each package and attempt to update it. This could be
ironed out a bit more later (by using the front-end get_info function
* Switched to libfetch. Drastic changes to the download code and the callback
progress bar functions. Also fixed the return value of
_alpm_downloadfiles_forreal. Downloading now supports http, ftp, https, and
files urls, along with 'mtime's and numerous other fancy features from
libfetch.
