This allows us to do all delta verification up front, followed by
whatever needs to be done with any found errors. In this case, we call
prompt_to_delete() for each error.
Add back the missing EVENT(ALPM_EVENT_DELTA_INTEGRITY_DONE) that
accidentally got removed in commit 062c391919.
Remove use of *data; we never even look at the stuff in this array for
the error code we were returning and this would be much better handled
by one callback per error anyway, or at least some strongly typed return
values.
Signed-off-by: Dan McGee <dan@archlinux.org>
This adds two new static methods, check_validity() and load_packages(),
to sync.c which are simply code fragments pulled out of our
do-everything sync commit code.
Signed-off-by: Dan McGee <dan@archlinux.org>
This adds a some new callback event and progress codes for package
loading, which was formerly bundled in with package validation before.
The main sync.c loop where loading occurred is now two loops running
sequentially. The behavior should not change with this patch outside of
progress and event display; more changes will come in following patches.
Signed-off-by: Dan McGee <dan@archlinux.org>
_alpm_pkg_load_internal() was becoming a monster. Extract the top bit of
the method that dealt with checksum and signature validation into a
separate method that should be called before one loads a package to
ensure it is valid.
Signed-off-by: Dan McGee <dan@archlinux.org>
1. Don't run it if something failed in package removal- this mirrors
what we already do in sync transactions.
2. Don't run it if we are invoking it for the replaces removal bit of a
sync transaction- it doesn't make sense to run ldconfig halfway through
a sync install; we should only run it once at the end.
Signed-off-by: Dan McGee <dan@archlinux.org>
Check for the existance of a partial download of a package file before
jumping to delta calculations. Currently, if there were 10MiB remaining
in a 100MiB the values passed to the front end do not reflect this.
Refactored from an old patch originally by Dan.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Neither deltas nor filename attributes are ever present in the local
database, so we can remove all of the indirection for accessing these
attributes.
Signed-off-by: Dan McGee <dan@archlinux.org>
Put all the callback stuff in alpm.h in one spot, and make the following
renames for clarity with the new structure:
ALPM_TRANS_EVT_* --> ALPM_EVENT_*
ALPM_TRANS_CONV_* --> ALPM_QUESTION_*
ALPM_TRANS_PROGRESS_* --> ALPM_PROGRESS_*
alpm_option_get_convcb() --> alpm_option_get_questioncb()
alpm_option_set_convcb() --> alpm_option_set_questioncb()
Signed-off-by: Dan McGee <dan@archlinux.org>
This was just disgusting before, unnecessary to limit these to only
usage in a transaction. Still a lot of more room for cleanup but we'll
start by attaching them to the handle rather than the transaction we may
or may not even want to use these callbacks.
Signed-off-by: Dan McGee <dan@archlinux.org>
The call to apply was tucked inside validate, and the EVENT callbacks
were done outside the function rather than inside. Reorganize things a
bit to make more sense.
Signed-off-by: Dan McGee <dan@archlinux.org>
We currently have csize, isize, and size concepts, and sometimes the
difference isn't clear. Ensure the following holds:
* size (aka csize): always the compressed size of the package; available
for everything except local packages (where it will return 0)
* isize: always the installed size of the package; available for all
three package types
Signed-off-by: Dan McGee <dan@archlinux.org>
This upgrades the simple 15/17 scaling by package number we used before
to package sized based scaling, which is much more accurate. Addresses
some of the issues raised in FS#25817.
Signed-off-by: Dan McGee <dan@archlinux.org>
Just pass the entire sync package in if we have it; that way we can do
any necessary operations involving it rather than have a parameter list
growing endlessly.
Signed-off-by: Dan McGee <dan@archlinux.org>
This avoids error spam when no servers are configured for a repo and a
sync operation is performed:
Proceed with installation? [Y/n] y
:: Retrieving packages from testing...
warning: failed to retrieve some files from testing
warning: failed to retrieve some files from testing
warning: failed to retrieve some files from testing
warning: failed to retrieve some files from testing
warning: failed to retrieve some files from testing
warning: failed to retrieve some files from testing
warning: failed to retrieve some files from testing
warning: failed to retrieve some files from testing
warning: failed to retrieve some files from testing
warning: failed to retrieve some files from testing
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a far more accurate description of what this is, since it's more
than likely not really a filename at all, but the name after a final
slash on a URL.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This changes the signature of _alpm_pkg_dup() to return an integer error
code and provide the new package in a passed pointer argument. All
callers are now more robust with checking the return value of this
function to ensure a fatal error did not occur.
We allow load failures to proceed as otherwise we have a chicken and egg
problem- if a 'desc' local database entry is missing, the best way of
restoring said file is `pacman -Sf --dbonly packagename`. This patch
fixes a segfault that was occurring in this case.
Fixes the segfault reported in FS#25667.
Signed-off-by: Dan McGee <dan@archlinux.org>
$ pacman -S cronie
resolving dependencies...
looking for inter-conflicts...
:: cronie and fcron are in conflict (@.). Remove fcron? [y/N] n
$ sudo pacman -S pacman
resolving dependencies...
looking for inter-conflicts...
:: pacman and pacman-git are in conflict (pKÈ). Remove pacman-git? [y/N]
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
When we switched to using alpm_depcmp() in resolving replacments, we had
some interesting behavior with regard to providers and packages not
found in repositories. Teach the replacement resolving code to not look
at provisions at all to be slightly more sane.
Signed-off-by: Dan McGee <dan@archlinux.org>
The functions alpm_db_get_name(), alpm_pkg_get_name(), and
alpm_pkg_get_version() are not necessary at all, so remove the calling
and indirection when used in the backend, which makes things slightly
more efficient and reduces code size.
Signed-off-by: Dan McGee <dan@archlinux.org>
* Move is_local standalone field to status enum
* Create VALID/INVALID flag pair
* Create EXISTS/MISSING flag pair
With these additional fields, we can be more intelligent with database
loading and messages to the user. We now only warn once if a sync
database does not exist and do not continue to try to load it once we
have marked it as missing.
The reason for the flags existing in pairs is so the unknown case can be
represented. There should never be a time when both flags in the same
group are true, but if they are both false, it represents the unknown
case. Care is taken to always manipulate both flags at the same time.
Signed-off-by: Dan McGee <dan@archlinux.org>
This reverts some hacky behavior from 5fc3ec and resets the handle's
pm_errno where it should be reset -- prior to each download. This
prevents a transaction with a download from being aborted when a package
is successfully grabbed from a secondary server.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
Previously, the behavior was such that if a sync operation required
packages from multiple repos, a download error in the first repo would
cause a hard repo, ignoring the remainder of the repositories. Change
this behavior so that we do a better job of fetching as many packages as
possible before aborting the transaction.
There's a little bit of refactoring mixed in here to get rid of some
useless variables. Since we now depend heavily on the value of
handle->pm_errno being accurate the determine the function's return
value, we clear it when the transaction state is set.
Fixes FS#25532.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
A partial fix for this was in commit 7de92cb22, but this should fix the
remaining cases. There are still several issues dealing with "provision
as replacement" selection however.
Addresses FS#25538 and FS#25527.
Signed-off-by: Dan McGee <dan@archlinux.org>
We did this with depends way back in commit c244cfecf6 in 2007. We
can do it with these fields as well.
Of note is the inclusion of provides even though only '=' is supported-
we'll parse other things, but no guarantees are given as to behavior,
which is more or less similar to before since we only looked for the
equals sign.
Also of note is the non-inclusion of optdepends; this will likely be
resolved down the road.
The biggest benefactors of this change will be the resolving code that
formerly had to parse and reparse several of these fields; it only
happens once now at load time. This does lead to the disadvantage that
we will now always be parsing this information up front even if we never
need it in the split form, but as these are uncommon fields and our
parser is quite efficient it shouldn't be a big concern.
Signed-off-by: Dan McGee <dan@archlinux.org>
This prevents iteration through the remainder of the current tree, with
pacman claiming that they're all replacements to the original
replacement candidate.
:: Synchronizing package databases...
allanbrokeit is up to date
testing is up to date
core is up to date
extra is up to date
community-testing is up to date
community is up to date
:: Starting full system upgrade...
:: Replace util-linux-git with core/util-linux? [Y/n] n
:: Replace util-linux-git with core/vi? [Y/n] n
:: Replace util-linux-git with core/vpnc? [Y/n] n
:: Replace util-linux-git with core/wget? [Y/n] n
:: Replace util-linux-git with core/which? [Y/n] n
:: Replace util-linux-git with core/wireless-regdb? [Y/n] n
:: Replace util-linux-git with core/wireless_tools? [Y/n] n
:: Replace util-linux-git with core/wpa_actiond? [Y/n] n
:: Replace util-linux-git with core/wpa_supplicant? [Y/n] n
:: Replace util-linux-git with core/xfsprogs? [Y/n] n
:: Replace util-linux-git with core/xinetd? [Y/n] n
:: Replace util-linux-git with core/xz? [Y/n] n
:: Replace util-linux-git with core/zd1211-firmware? [Y/n] n
:: Replace util-linux-git with core/zlib? [Y/n] n
there is nothing to do
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
This is done extremely crudely and is not very efficient, but it does
push us down the path of being closer to right, as one additional test
now passes.
Signed-off-by: Dan McGee <dan@archlinux.org>
This is a bit of a mess, due to the fact that we have a progress meter
running. It is also ironic that we are in the midst of a method named
"commit" when we haven't done a damn thing yet, and can still fail hard
if either a checksum or signature is invalid or unrecognized.
Adapt the former test_md5sum method to be invoked for any of the various
failure types, which at least gives the user some indication of what
packages are failing. A second patch will be needed to actually show
worthwhile error codes, but this is going to involve modifying the
actual data passed with the callback.
Signed-off-by: Dan McGee <dan@archlinux.org>
Restore some sanity to the number of arguments passed to _alpm_download
and curl_download_internal.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
This means creating a new struct which can pass more descriptive data
from the back end sync functions to the downloader. In particular, we're
interested in the download size read from the sync DB. When the remote
server reports a size larger than this (via a content-length header),
abort the transfer.
In cases where the size is unknown, we set a hard upper limit of:
* 25MiB for a sync DB
* 16KiB for a signature
For reference, 25MiB is more than twice the size of all of the current
binary repos (with files) combined, and 16KiB is a truly gargantuan
signature.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
URLs might end with a slash and follow redirects, or could be a
generated by a script such as /getpkg.php?id=12345. In both cases, we
may have a better filename that we can write to, taken from either
content-disposition header, or the effective URL.
Specific to the first case, we write to a temporary file of the format
'alpmtmp.XXXXXX', where XXXXXX is randomized by mkstemp(3). Since this
is a randomly generated file, we cannot support resuming and the file is
unlinked in the event of an interrupt.
We also run into the possibility of changing out the filename from under
alpm on a -U operation, so callers of _alpm_download can optionally pass
a pointer to a *char to be filled in by curl_download_internal with the
actual filename we wrote to. Any sync operation will pass a NULL pointer
here, as we rely on specific names for packages from a mirror.
Fixes FS#22645.
Signed-off-by: Dave Reisner <d@falconindy.com>
They are placeholders, but important for things like trying to re-sync a
database missing a signature. By using the alpm_db_validity() method at
the right time, a client can take the appropriate action with these
invalid databases as necessary.
In pacman's case, we disallow just about anything that involves looking
at a sync database outside of an '-Sy' operation (although we do check
the validity immediately after). A few operations are still permitted-
'-Q' ops that don't touch sync databases as well as '-R'.
Signed-off-by: Dan McGee <dan@archlinux.org>
This gives us more granularity than the former Never/Optional/Always
trifecta. The frontend still uses these values temporarily but that will
be changed in a future patch.
* Use 'siglevel' consistenly in method names, 'level' as variable name
* The level becomes an enum bitmask value for flexibility
* Signature check methods now return a array of status codes rather than
a simple integer success/failure value. This allows callers to
determine whether things such as an unknown signature are valid.
* Specific signature error codes mostly disappear in favor of the above
returned status code; pm_errno is now set only to PKG_INVALID_SIG or
DB_INVALID_SIG as appropriate.
Signed-off-by: Dan McGee <dan@archlinux.org>
Using grp instead of group is a small saving at the cost of clarity.
Rename the following functions:
alpm_option_get_ignoregrps -> alpm_option_get_ignoregroups
alpm_option_add_ignoregrp -> alpm_option_add_ignoregroup
alpm_option_set_ignoregrps -> alpm_option_set_ignoregroups
alpm_option_remove_ignoregrp -> alpm_option_remove_ignoregroup
alpm_db_readgrp -> alpm_db_readgroup
alpm_db_get_grpcache -> alpm_db_get_groupcache
alpm_find_grp_pkgs -> alpm_find_group_pkgs
Signed-off-by: Allan McRae <allan@archlinux.org>
