1
0
mirror of https://github.com/moparisthebest/pacman synced 2024-11-15 22:05:02 -05:00
pacman/lib/libalpm/be_sync.c

547 lines
16 KiB
C
Raw Normal View History

/*
* be_sync.c : backend for sync databases
*
* Copyright (c) 2006-2011 Pacman Development Team <pacman-dev@archlinux.org>
Complete rework of package accessor logic Hopefully we've finally arrived at package handling nirvana, or at least this commit will get us a heck of a lot closer. The former method of getting the depends list for a package was the following: 1. call alpm_pkg_get_depends() 2. this method would check if the package came from the cache 3. if so, ensure our cache level is correct, otherwise call db_load 4. finally return the depends list Why did this suck? Because getting the depends list from the package shouldn't care about whether the package was loaded from a file, from the 'package cache', or some other system which we can't even use because the damn thing is so complicated. It should just return the depends list. So what does this commit change? It adds a pointer to a struct of function pointers to every package for all of these 'package operations' as I've decided to call them (I know, sounds completely straightforward, right?). So now when we call an alpm_pkg_get-* function, we don't do any of the cache logic or anything else there- we let the actual backend handle it by delegating all work to the method at pkg->ops->get_depends. Now that be_package has achieved equal status with be_files, we can treat packages from these completely different load points differently. We know a package loaded from a zip file will have all of its fields populated, so we can set up all its accessor functions to be direct accessors. On the other hand, the packages loaded from the local and sync DBs are not always fully-loaded, so their accessor functions are routed through the same logic as before. Net result? More code. However, this code now make it roughly 52 times easier to open the door to something like a read-only tar.gz database backend. Are you still reading? I'm impressed. Looking at the patch will probably be clearer than this long-winded explanation. Signed-off-by: Dan McGee <dan@archlinux.org> [Allan: rebase and adjust] Signed-off-by: Allan McRae <allan@archlinux.org>
2008-05-11 17:00:33 -04:00
* Copyright (c) 2002-2006 by Judd Vinet <jvinet@zeroflux.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "config.h"
#include <sys/stat.h>
/* libarchive */
#include <archive.h>
#include <archive_entry.h>
/* libalpm */
#include "util.h"
#include "log.h"
#include "alpm.h"
#include "alpm_list.h"
#include "package.h"
#include "handle.h"
#include "delta.h"
#include "deps.h"
#include "dload.h"
static char *get_sync_dir(pmhandle_t *handle)
{
const char *dbpath = alpm_option_get_dbpath(handle);
size_t len = strlen(dbpath) + 6;
char *syncpath;
struct stat buf;
MALLOC(syncpath, len, RET_ERR(handle, PM_ERR_MEMORY, NULL));
sprintf(syncpath, "%s%s", dbpath, "sync/");
if(stat(syncpath, &buf) != 0) {
_alpm_log(handle, PM_LOG_DEBUG, "database dir '%s' does not exist, creating it\n",
syncpath);
if(_alpm_makepath(syncpath) != 0) {
free(syncpath);
RET_ERR(handle, PM_ERR_SYSTEM, NULL);
}
} else if(!S_ISDIR(buf.st_mode)) {
_alpm_log(handle, PM_LOG_WARNING, _("removing invalid file: %s\n"), syncpath);
if(unlink(syncpath) != 0 || _alpm_makepath(syncpath) != 0) {
free(syncpath);
RET_ERR(handle, PM_ERR_SYSTEM, NULL);
}
}
return syncpath;
}
/** Update a package database
*
* An update of the package database \a db will be attempted. Unless
* \a force is true, the update will only be performed if the remote
* database was modified since the last update.
*
* A transaction is necessary for this operation, in order to obtain a
* database lock. During this transaction the front-end will be informed
* of the download progress of the database via the download callback.
*
* Example:
* @code
* alpm_list_t *syncs = alpm_option_get_syncdbs();
* if(alpm_trans_init(0, NULL, NULL, NULL) == 0) {
* for(i = syncs; i; i = alpm_list_next(i)) {
* pmdb_t *db = alpm_list_getdata(i);
* result = alpm_db_update(0, db);
* alpm_trans_release();
*
* if(result < 0) {
* printf("Unable to update database: %s\n", alpm_strerrorlast());
* } else if(result == 1) {
* printf("Database already up to date\n");
* } else {
* printf("Database updated\n");
* }
* }
* }
* @endcode
*
* @ingroup alpm_databases
* @note After a successful update, the \link alpm_db_get_pkgcache()
* package cache \endlink will be invalidated
* @param force if true, then forces the update, otherwise update only in case
* the database isn't up to date
* @param db pointer to the package database to update
* @return 0 on success, -1 on error (pm_errno is set accordingly), 1 if up to
* to date
*/
int SYMEXPORT alpm_db_update(int force, pmdb_t *db)
{
char *syncpath;
alpm_list_t *i;
int ret = -1;
mode_t oldmask;
pmhandle_t *handle;
pgp_verify_t check_sig;
/* Sanity checks */
ASSERT(db != NULL, return -1);
handle = db->handle;
handle->pm_errno = 0;
ASSERT(db != handle->db_local, RET_ERR(handle, PM_ERR_WRONG_ARGS, -1));
ASSERT(db->servers != NULL, RET_ERR(handle, PM_ERR_SERVER_NONE, -1));
/* make sure we have a sane umask */
oldmask = umask(0022);
syncpath = get_sync_dir(handle);
if(!syncpath) {
return -1;
}
check_sig = _alpm_db_get_sigverify_level(db);
for(i = db->servers; i; i = i->next) {
const char *server = i->data;
char *fileurl;
size_t len;
int sig_ret = 0;
/* print server + filename into a buffer (leave space for .sig) */
len = strlen(server) + strlen(db->treename) + 9;
CALLOC(fileurl, len, sizeof(char), RET_ERR(handle, PM_ERR_MEMORY, -1));
snprintf(fileurl, len, "%s/%s.db", server, db->treename);
ret = _alpm_download(handle, fileurl, syncpath, force, 0, 0);
if(ret == 0 && (check_sig == PM_PGP_VERIFY_ALWAYS ||
check_sig == PM_PGP_VERIFY_OPTIONAL)) {
int errors_ok = (check_sig == PM_PGP_VERIFY_OPTIONAL);
/* if we downloaded a DB, we want the .sig from the same server */
snprintf(fileurl, len, "%s/%s.db.sig", server, db->treename);
sig_ret = _alpm_download(handle, fileurl, syncpath, 1, 0, errors_ok);
/* errors_ok suppresses error messages, but not the return code */
sig_ret = errors_ok ? 0 : sig_ret;
}
FREE(fileurl);
if(ret != -1 && sig_ret != -1) {
break;
}
}
if(ret == 1) {
download: major refactor to address lingering issues Sorry for this being such a huge patch, but I believe it is necessary for quite a few reasons which I will attempt to explain herein. I've been mulling this over for a while, but wasn't super happy with making the download interface more complex. Instead, if we carefully order things in the internal download code, we can actually make the interface simpler. 1. FS#15657 - This involves `name.db.tar.gz.part` files being left around the filesystem, and then causing all sorts of issues when someone attempts to rerun the operation they canceled. We need to ensure that if we resume a download, we are resuming it on exactly the same file; if we cannot be almost postive of that then we need to start over. 2. http://www.mail-archive.com/pacman-dev@archlinux.org/msg03536.html - Here we have a lighttpd bug to ruin the day. If we send both a Range: header and If-Modified-Since: header across the wire in a GET request, lighttpd doesn't do what we want in several cases. If the file hadn't been modified, it returns a '304 Not Modified' instead of a '206 Partial Content'. We need to do a stat (e.g. HEAD in HTTP terms) operation here, and the proceed accordingly based off the values we get back from it. 3. The mtime stuff was rather ugly, and relied on the called function to write back to a passed in reference, which isn't the greatest. Instead, use the power of the filesystem to contain this info. Every file downloaded internally is now carefully timestamped with the remote file time. This should allow the resume logic to work. In order to guarantee this, we need to implement a signal handler that catches interrupts, notifies the running code, and causes it to set the mtimes on the file. It then rethrows the signal so the pacman signal handler (or any frontend) works as expected. 4. We did a lot of funky stuff in trying to track the DB last modified time. It is a lot easier to just keep the downloaded DB file around and track the time on that rather than in a funky dot file. It also kills a lot of code. 5. For GPG verification of the databases down the road, we are going to need the DB file around for at least a short bit of time anyway, so this gets us closer to that. Signed-off-by: Dan McGee <dan@archlinux.org> [Xav: fixed printf with off_t] Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
2009-11-12 00:39:26 -05:00
/* files match, do nothing */
handle->pm_errno = 0;
goto cleanup;
} else if(ret == -1) {
/* pm_errno was set by the download code */
_alpm_log(handle, PM_LOG_DEBUG, "failed to sync db: %s\n",
alpm_strerror(handle->pm_errno));
goto cleanup;
}
/* Cache needs to be rebuilt */
_alpm_db_free_pkgcache(db);
cleanup:
free(syncpath);
umask(oldmask);
return ret;
}
/* Forward decl so I don't reorganize the whole file right now */
static int sync_db_read(pmdb_t *db, struct archive *archive,
struct archive_entry *entry, pmpkg_t *likely_pkg);
/*
* This is the data table used to generate the estimating function below.
* "Weighted Avg" means averaging the bottom table values; thus each repo, big
* or small, will have equal influence. "Unweighted Avg" means averaging the
* sums of the top table columns, thus each package has equal influence. The
* final values are calculated by (surprise) averaging the averages, because
* why the hell not.
*
* Database Pkgs tar bz2 gz xz
* community 2096 5294080 256391 421227 301296
* core 180 460800 25257 36850 29356
* extra 2606 6635520 294647 470818 339392
* multilib 126 327680 16120 23261 18732
* testing 76 204800 10902 14348 12100
*
* Bytes Per Package
* community 2096 2525.80 122.32 200.97 143.75
* core 180 2560.00 140.32 204.72 163.09
* extra 2606 2546.25 113.06 180.67 130.23
* multilib 126 2600.63 127.94 184.61 148.67
* testing 76 2694.74 143.45 188.79 159.21
* Weighted Avg 2585.48 129.42 191.95 148.99
* Unweighted Avg 2543.39 118.74 190.16 137.93
* Average of Avgs 2564.44 124.08 191.06 143.46
*/
static size_t estimate_package_count(struct stat *st, struct archive *archive)
{
unsigned int per_package;
switch(archive_compression(archive)) {
case ARCHIVE_COMPRESSION_NONE:
per_package = 2564;
break;
case ARCHIVE_COMPRESSION_GZIP:
per_package = 191;
break;
case ARCHIVE_COMPRESSION_BZIP2:
per_package = 124;
break;
case ARCHIVE_COMPRESSION_COMPRESS:
per_package = 193;
break;
case ARCHIVE_COMPRESSION_LZMA:
case ARCHIVE_COMPRESSION_XZ:
per_package = 143;
break;
#ifdef ARCHIVE_COMPRESSION_UU
case ARCHIVE_COMPRESSION_UU:
per_package = 3543;
break;
#endif
default:
/* assume it is at least somewhat compressed */
per_package = 200;
}
return (size_t)((st->st_size / per_package) + 1);
}
static int sync_db_populate(pmdb_t *db)
{
const char *dbpath;
size_t est_count;
int count = 0;
struct stat buf;
struct archive *archive;
struct archive_entry *entry;
pmpkg_t *pkg = NULL;
if((archive = archive_read_new()) == NULL) {
RET_ERR(db->handle, PM_ERR_LIBARCHIVE, -1);
}
archive_read_support_compression_all(archive);
archive_read_support_format_all(archive);
dbpath = _alpm_db_path(db);
if(!dbpath) {
/* pm_errno set in _alpm_db_path() */
return -1;
}
_alpm_log(db->handle, PM_LOG_DEBUG, "opening database archive %s\n", dbpath);
if(archive_read_open_filename(archive, dbpath,
ARCHIVE_DEFAULT_BYTES_PER_BLOCK) != ARCHIVE_OK) {
_alpm_log(db->handle, PM_LOG_ERROR, _("could not open file %s: %s\n"), dbpath,
archive_error_string(archive));
archive_read_finish(archive);
RET_ERR(db->handle, PM_ERR_DB_OPEN, -1);
}
if(stat(dbpath, &buf) != 0) {
RET_ERR(db->handle, PM_ERR_DB_OPEN, -1);
}
est_count = estimate_package_count(&buf, archive);
/* initialize hash at 66% full */
db->pkgcache = _alpm_pkghash_create(est_count * 3 / 2);
if(db->pkgcache == NULL) {
RET_ERR(db->handle, PM_ERR_MEMORY, -1);
}
while(archive_read_next_header(archive, &entry) == ARCHIVE_OK) {
const struct stat *st;
st = archive_entry_stat(entry);
if(S_ISDIR(st->st_mode)) {
const char *name;
pkg = _alpm_pkg_new();
if(pkg == NULL) {
archive_read_finish(archive);
RET_ERR(db->handle, PM_ERR_MEMORY, -1);
}
name = archive_entry_pathname(entry);
if(_alpm_splitname(name, pkg) != 0) {
_alpm_log(db->handle, PM_LOG_ERROR, _("invalid name for database entry '%s'\n"),
name);
_alpm_pkg_free(pkg);
pkg = NULL;
continue;
}
/* duplicated database entries are not allowed */
if(_alpm_pkghash_find(db->pkgcache, pkg->name)) {
_alpm_log(db->handle, PM_LOG_ERROR, _("duplicated database entry '%s'\n"), pkg->name);
_alpm_pkg_free(pkg);
pkg = NULL;
continue;
}
pkg->origin = PKG_FROM_SYNCDB;
pkg->origin_data.db = db;
pkg->ops = &default_pkg_ops;
pkg->handle = db->handle;
/* add to the collection */
_alpm_log(db->handle, PM_LOG_FUNCTION, "adding '%s' to package cache for db '%s'\n",
pkg->name, db->treename);
db->pkgcache = _alpm_pkghash_add(db->pkgcache, pkg);
count++;
} else {
/* we have desc, depends or deltas - parse it */
if(sync_db_read(db, archive, entry, pkg) != 0) {
_alpm_log(db->handle, PM_LOG_ERROR,
_("could not parse package '%s' description file from db '%s'\n"),
pkg->name, db->treename);
_alpm_pkg_free(pkg);
pkg = NULL;
continue;
}
}
}
if(count > 0) {
db->pkgcache->list = alpm_list_msort(db->pkgcache->list, (size_t)count, _alpm_pkg_cmp);
}
archive_read_finish(archive);
_alpm_log(db->handle, PM_LOG_DEBUG, "added %d packages to package cache for db '%s'\n",
count, db->treename);
return count;
}
#define READ_NEXT(s) do { \
if(_alpm_archive_fgets(archive, &buf) != ARCHIVE_OK) goto error; \
s = _alpm_strtrim(buf.line); \
} while(0)
#define READ_AND_STORE(f) do { \
READ_NEXT(line); \
STRDUP(f, line, goto error); \
} while(0)
#define READ_AND_STORE_ALL(f) do { \
char *linedup; \
READ_NEXT(line); \
if(strlen(line) == 0) break; \
STRDUP(linedup, line, goto error); \
f = alpm_list_add(f, linedup); \
} while(1) /* note the while(1) and not (0) */
static int sync_db_read(pmdb_t *db, struct archive *archive,
struct archive_entry *entry, pmpkg_t *likely_pkg)
{
const char *entryname, *filename;
char *pkgname, *p, *q;
pmpkg_t *pkg;
struct archive_read_buffer buf;
entryname = archive_entry_pathname(entry);
if(entryname == NULL) {
_alpm_log(db->handle, PM_LOG_DEBUG,
"invalid archive entry provided to _alpm_sync_db_read, skipping\n");
return -1;
}
_alpm_log(db->handle, PM_LOG_FUNCTION, "loading package data from archive entry %s\n",
entryname);
memset(&buf, 0, sizeof(buf));
/* 512K for a line length seems reasonable */
buf.max_line_size = 512 * 1024;
/* get package and db file names */
STRDUP(pkgname, entryname, RET_ERR(db->handle, PM_ERR_MEMORY, -1));
p = pkgname + strlen(pkgname);
for(q = --p; *q && *q != '/'; q--);
filename = q + 1;
for(p = --q; *p && *p != '-'; p--);
for(q = --p; *q && *q != '-'; q--);
*q = '\0';
/* package is already in db due to parsing of directory name */
if(likely_pkg && strcmp(likely_pkg->name, pkgname) == 0) {
pkg = likely_pkg;
} else {
if(db->pkgcache == NULL) {
RET_ERR(db->handle, PM_ERR_MEMORY, -1);
}
pkg = _alpm_pkghash_find(db->pkgcache, pkgname);
}
if(pkg == NULL) {
_alpm_log(db->handle, PM_LOG_DEBUG, "package %s not found in %s sync database",
pkgname, db->treename);
return -1;
}
if(strcmp(filename, "desc") == 0 || strcmp(filename, "depends") == 0
|| strcmp(filename, "deltas") == 0) {
int ret;
while((ret = _alpm_archive_fgets(archive, &buf)) == ARCHIVE_OK) {
char *line = _alpm_strtrim(buf.line);
if(strcmp(line, "%NAME%") == 0) {
READ_NEXT(line);
if(strcmp(line, pkg->name) != 0) {
_alpm_log(db->handle, PM_LOG_ERROR, _("%s database is inconsistent: name "
"mismatch on package %s\n"), db->treename, pkg->name);
}
} else if(strcmp(line, "%VERSION%") == 0) {
READ_NEXT(line);
if(strcmp(line, pkg->version) != 0) {
_alpm_log(db->handle, PM_LOG_ERROR, _("%s database is inconsistent: version "
"mismatch on package %s\n"), db->treename, pkg->name);
}
} else if(strcmp(line, "%FILENAME%") == 0) {
READ_AND_STORE(pkg->filename);
} else if(strcmp(line, "%DESC%") == 0) {
READ_AND_STORE(pkg->desc);
} else if(strcmp(line, "%GROUPS%") == 0) {
READ_AND_STORE_ALL(pkg->groups);
} else if(strcmp(line, "%URL%") == 0) {
READ_AND_STORE(pkg->url);
} else if(strcmp(line, "%LICENSE%") == 0) {
READ_AND_STORE_ALL(pkg->licenses);
} else if(strcmp(line, "%ARCH%") == 0) {
READ_AND_STORE(pkg->arch);
} else if(strcmp(line, "%BUILDDATE%") == 0) {
READ_NEXT(line);
pkg->builddate = _alpm_parsedate(line);
} else if(strcmp(line, "%PACKAGER%") == 0) {
READ_AND_STORE(pkg->packager);
} else if(strcmp(line, "%CSIZE%") == 0) {
/* Note: the CSIZE and SIZE fields both share the "size" field in the
* pkginfo_t struct. This can be done b/c CSIZE is currently only used
* in sync databases, and SIZE is only used in local databases.
*/
READ_NEXT(line);
pkg->size = atol(line);
/* also store this value to isize if isize is unset */
if(pkg->isize == 0) {
pkg->isize = pkg->size;
}
} else if(strcmp(line, "%ISIZE%") == 0) {
READ_NEXT(line);
pkg->isize = atol(line);
} else if(strcmp(line, "%MD5SUM%") == 0) {
READ_AND_STORE(pkg->md5sum);
} else if(strcmp(line, "%SHA256SUM%") == 0) {
/* we don't do anything with this value right now */
READ_NEXT(line);
} else if(strcmp(line, "%PGPSIG%") == 0) {
READ_AND_STORE(pkg->base64_sig);
} else if(strcmp(line, "%REPLACES%") == 0) {
READ_AND_STORE_ALL(pkg->replaces);
} else if(strcmp(line, "%DEPENDS%") == 0) {
/* Different than the rest because of the _alpm_splitdep call. */
while(1) {
READ_NEXT(line);
if(strlen(line) == 0) break;
pkg->depends = alpm_list_add(pkg->depends, _alpm_splitdep(line));
}
} else if(strcmp(line, "%OPTDEPENDS%") == 0) {
READ_AND_STORE_ALL(pkg->optdepends);
} else if(strcmp(line, "%CONFLICTS%") == 0) {
READ_AND_STORE_ALL(pkg->conflicts);
} else if(strcmp(line, "%PROVIDES%") == 0) {
READ_AND_STORE_ALL(pkg->provides);
} else if(strcmp(line, "%DELTAS%") == 0) {
/* Different than the rest because of the _alpm_delta_parse call. */
while(1) {
READ_NEXT(line);
if(strlen(line) == 0) break;
pkg->deltas = alpm_list_add(pkg->deltas, _alpm_delta_parse(line));
}
}
}
if(ret != ARCHIVE_EOF) {
goto error;
}
} else if(strcmp(filename, "files") == 0) {
/* currently do nothing with this file */
} else {
/* unknown database file */
_alpm_log(db->handle, PM_LOG_DEBUG, "unknown database file: %s\n", filename);
}
FREE(pkgname);
return 0;
error:
_alpm_log(db->handle, PM_LOG_DEBUG, "error parsing database file: %s\n", filename);
FREE(pkgname);
return -1;
}
static int sync_db_version(pmdb_t UNUSED *db)
{
return 2;
}
struct db_operations sync_db_ops = {
.populate = sync_db_populate,
.unregister = _alpm_db_unregister,
.version = sync_db_version,
};
pmdb_t *_alpm_db_register_sync(pmhandle_t *handle, const char *treename)
{
pmdb_t *db;
_alpm_log(handle, PM_LOG_DEBUG, "registering sync database '%s'\n", treename);
db = _alpm_db_new(treename, 0);
if(db == NULL) {
RET_ERR(handle, PM_ERR_DB_CREATE, NULL);
}
db->ops = &sync_db_ops;
db->handle = handle;
handle->dbs_sync = alpm_list_add(handle->dbs_sync, db);
return db;
}
/* vim: set ts=2 sw=2 noet: */