mirror of
https://github.com/moparisthebest/minetest
synced 2024-11-17 23:05:07 -05:00
c5c727d627
ABM's are hardcoded to run every 1.0s, NodeTimers are hard coded to run at every 1.0s. Block mgmt is running every 2.0sec. However, these timers can be better tuned for both higher and lower values by server owners. Some server owners want to, and have the resources to send more packets per second to clients, and so they may wish to send smaller updates sooner. Right now all ABM's are coalesced into 1.0 second intervals, resulting in large send queues to all clients. By reducing the amount of possible timers, one can get a far better response rate and lower the perception of lag. On the other side of the camp, some servers may want to increase these values, which again isn't easily doable. The global settings abm_interval and nodetimer_interval are set to current values by default. I've tested with 0.2/0.5 type values and noticed a greatly improved response and better scattering of nodetimers, as well as enjoying not faceplanting into doors with pressure plates anymore.
1194 lines
48 KiB
Plaintext
1194 lines
48 KiB
Plaintext
# This file contains all settings displayed in the settings menu.
|
|
#
|
|
# General format:
|
|
# name (Readable name) type type_args
|
|
#
|
|
# Note that the parts are seperated by exactly one space
|
|
#
|
|
# `type` can be:
|
|
# - int
|
|
# - string
|
|
# - bool
|
|
# - float
|
|
# - enum
|
|
# - path
|
|
# - key (will be ignored in GUI, since a special key change dialog exists)
|
|
# - flags
|
|
# - noise_params
|
|
#
|
|
# `type_args` can be:
|
|
# * int:
|
|
# - default
|
|
# - default min max
|
|
# * string:
|
|
# - default (if default is not specified then "" is set)
|
|
# * bool:
|
|
# - default
|
|
# * float:
|
|
# - default
|
|
# - default min max
|
|
# * enum:
|
|
# - default value1,value2,...
|
|
# * path:
|
|
# - default (if default is not specified then "" is set)
|
|
# * key:
|
|
# - default
|
|
# * flags:
|
|
# Flags are always separated by comma without spaces.
|
|
# - default possible_flags
|
|
# * noise_params:
|
|
# TODO: these are currently treated like strings
|
|
#
|
|
# Comments directly above a setting are bound to this setting.
|
|
# All other comments are ignored.
|
|
#
|
|
# Comments and (Readable name) are handled by gettext.
|
|
# Comments should be complete sentences that describe the setting and possibly
|
|
# give the user additional useful insight.
|
|
# Sections are marked by a single line in the format: [Section Name]
|
|
# Sub-section are marked by adding * in front of the section name: [*Sub-section]
|
|
# Sub-sub-sections have two * etc.
|
|
# There shouldn't be too much settings per category; settings that shouldn't be
|
|
# modified by the "average user" should be in (sub-)categories called "Advanced".
|
|
|
|
[Client]
|
|
|
|
[*Controls]
|
|
# If enabled, you can place blocks at the position (feet + eye level) where you stand.
|
|
# This is helpful when working with nodeboxes in small areas.
|
|
enable_build_where_you_stand (Build inside player) bool false
|
|
|
|
# Player is able to fly without being affected by gravity.
|
|
# This requires the "fly" privilege on the server.
|
|
free_move (Flying) bool false
|
|
|
|
# Fast movement (via use key).
|
|
# This requires the "fast" privilege on the server.
|
|
fast_move (Fast movement) bool false
|
|
|
|
# If enabled together with fly mode, player is able to fly through solid nodes.
|
|
# This requires the "noclip" privilege on the server.
|
|
noclip (Noclip) bool false
|
|
|
|
# Smooths camera when moving and looking around.
|
|
# Useful for recording videos.
|
|
cinematic (Cinematic mode) bool false
|
|
|
|
# Smooths rotation of camera. 0 to disable.
|
|
camera_smoothing (Camera smoothing) float 0.0 0.0 0.99
|
|
|
|
# Smooths rotation of camera in cinematic mode. 0 to disable.
|
|
cinematic_camera_smoothing (Camera smoothing in cinematic mode) float 0.7 0.0 0.99
|
|
|
|
# Invert vertical mouse movement.
|
|
invert_mouse (Invert mouse) bool false
|
|
|
|
# Mouse sensitivity multiplier.
|
|
mouse_sensitivity (Mouse sensitivity) float 0.2
|
|
|
|
# If enabled, "use" key instead of "sneak" key is used for climbing down and descending.
|
|
aux1_descends (Key use for climbing/descending) bool false
|
|
|
|
# Double-tapping the jump key toggles fly mode.
|
|
doubletap_jump (Double tap jump for fly) bool false
|
|
|
|
# If disabled "use" key is used to fly fast if both fly and fast mode are enabled.
|
|
always_fly_fast (Always fly and fast) bool true
|
|
|
|
# The time in seconds it takes between repeated right clicks when holding the right mouse button.
|
|
repeat_rightclick_time (Rightclick repetition interval) float 0.25
|
|
|
|
# Enable random user input (only used for testing).
|
|
random_input (Random input) bool false
|
|
|
|
# Continuous forward movement (only used for testing).
|
|
continuous_forward (Continuous forward) bool false
|
|
|
|
# Key for moving the player forward.
|
|
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
|
|
keymap_forward (Forward key) key KEY_KEY_W
|
|
|
|
# Key for moving the player backward.
|
|
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
|
|
keymap_backward (Backward key) key KEY_KEY_S
|
|
|
|
# Key for moving the player left.
|
|
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
|
|
keymap_left (Left key) key KEY_KEY_A
|
|
|
|
# Key for moving the player right.
|
|
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
|
|
keymap_right (Right key) key KEY_KEY_D
|
|
|
|
# Key for jumping.
|
|
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
|
|
keymap_jump (Jump key) key KEY_SPACE
|
|
|
|
# Key for sneaking.
|
|
# Also used for climbing down and descending in water if aux1_descends is disabled.
|
|
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
|
|
keymap_sneak (Sneak key) key KEY_LSHIFT
|
|
|
|
# Key for opening the inventory.
|
|
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
|
|
keymap_inventory (Inventory key) key KEY_KEY_I
|
|
|
|
# Key for moving fast in fast mode.
|
|
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
|
|
keymap_special1 (Use key) key KEY_KEY_E
|
|
|
|
# Key for opening the chat window.
|
|
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
|
|
keymap_chat (Chat key) key KEY_KEY_T
|
|
|
|
# Key for opening the chat window to type commands.
|
|
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
|
|
keymap_cmd (Command key) key /
|
|
|
|
# Key for opening the chat console.
|
|
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
|
|
keyman_console (Console key) key KEY_F10
|
|
|
|
# Key for toggling unlimited view range.
|
|
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
|
|
keymap_rangeselect (Range select key) key KEY_KEY_R
|
|
|
|
# Key for toggling flying.
|
|
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
|
|
keymap_freemove (Fly key) key KEY_KEY_K
|
|
|
|
# Key for toggling fast mode.
|
|
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
|
|
keymap_fastmove (Fast key) key KEY_KEY_J
|
|
|
|
# Key for toggling noclip mode.
|
|
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
|
|
keymap_noclip (Noclip key) key KEY_KEY_H
|
|
|
|
# Key for toggling cinematic mode.
|
|
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
|
|
keymap_cinematic (Cinematic mode key) key KEY_F8
|
|
|
|
# Key for toggling display of minimap.
|
|
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
|
|
keymap_minimap (Minimap key) key KEY_F9
|
|
|
|
# Key for taking screenshots.
|
|
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
|
|
keymap_screenshot (Screenshot) key KEY_F12
|
|
|
|
# Key for dropping the currently selected item.
|
|
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
|
|
keymap_drop (Drop item key) key KEY_KEY_Q
|
|
|
|
# Key for toggling the display of the HUD.
|
|
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
|
|
keymap_toggle_hud (HUD toggle key) key KEY_F1
|
|
|
|
# Key for toggling the display of the chat.
|
|
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
|
|
keymap_toggle_chat (Chat toggle key) key KEY_F2
|
|
|
|
# Key for toggling the display of the fog.
|
|
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
|
|
keymap_toggle_force_fog_off (Fog toggle key) key KEY_F3
|
|
|
|
# Key for toggling the camrea update. Only used for development
|
|
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
|
|
keymap_toggle_update_camera (Camera update toggle key) key
|
|
|
|
# Key for toggling the display of debug info.
|
|
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
|
|
keymap_toggle_debug (Debug info toggle key) key KEY_F5
|
|
|
|
# Key for toggling the display of the profiler. Used for development.
|
|
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
|
|
keymap_toggle_profiler (Profiler toggle key) key KEY_F6
|
|
|
|
# Key for switching between first- and third-person camera.
|
|
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
|
|
keymap_camera_mode (Toggle camera mode key) key KEY_F7
|
|
|
|
# Key for increasing the viewing range.
|
|
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
|
|
keymap_increase_viewing_range_min (View range increase key) key +
|
|
|
|
# Key for decreasing the viewing range.
|
|
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
|
|
keymap_decrease_viewing_range_min (View range decrease key) key -
|
|
|
|
# Key for printing debug stacks. Used for development.
|
|
# See http://irrlicht.sourceforge.net/docu/namespaceirr.html#a54da2a0e231901735e3da1b0edf72eb3
|
|
keymap_print_debug_stacks (Print stacks) key KEY_KEY_P
|
|
|
|
[*Network]
|
|
|
|
# Address to connect to.
|
|
# Leave this blank to start a local server.
|
|
# Note that the address field in the main menu overrides this setting.
|
|
address (Server address) string
|
|
|
|
# Port to connect to (UDP).
|
|
# Note that the port field in the main menu overrides this setting.
|
|
remote_port (Remote port) int 30000 1 65535
|
|
|
|
# Whether to support older servers before protocol version 25.
|
|
# Enable if you want to connect to 0.4.12 servers and before.
|
|
# Servers starting with 0.4.13 will work, 0.4.12-dev servers may work.
|
|
# Disabling this option will protect your password better.
|
|
send_pre_v25_init (Support older servers) bool true
|
|
|
|
# Save the map received by the client on disk.
|
|
enable_local_map_saving (Saving map received from server) bool false
|
|
|
|
# Enable usage of remote media server (if provided by server).
|
|
# Remote servers offer a significantly faster way to download media (e.g. textures)
|
|
# when connecting to the server.
|
|
enable_remote_media_server (Connect to external media server) bool true
|
|
|
|
# URL to the server list displayed in the Multiplayer Tab.
|
|
serverlist_url (Serverlist URL) string servers.minetest.net
|
|
|
|
# File in client/serverlist/ that contains your favorite servers displayed in the Multiplayer Tab.
|
|
serverlist_file (Serverlist file) string favoriteservers.txt
|
|
|
|
[*Graphics]
|
|
|
|
[**In-Game]
|
|
|
|
[***Basic]
|
|
|
|
# Enable VBO
|
|
enable_vbo (VBO) bool true
|
|
|
|
# Whether to fog out the end of the visible area.
|
|
enable_fog (Fog) bool true
|
|
|
|
# Leaves style:
|
|
# - Fancy: all faces visible
|
|
# - Simple: only outer faces, if defined special_tiles are used
|
|
# - Opaque: disable transparency
|
|
leaves_style (Leaves style) enum fancy fancy,simple,opaque
|
|
|
|
# Connects glass if supported by node.
|
|
connected_glass (Connect glass) bool false
|
|
|
|
# Enable smooth lighting with simple ambient occlusion.
|
|
# Disable for speed or for different looks.
|
|
smooth_lighting (Smooth lighting) bool true
|
|
|
|
# Clouds are a client side effect.
|
|
enable_clouds (Clouds) bool true
|
|
|
|
# Use 3D cloud look instead of flat.
|
|
enable_3d_clouds (3D clouds) bool true
|
|
|
|
# Method used to highlight selected object.
|
|
node_highlighting (Node highlighting) enum box box,halo
|
|
|
|
[***Filtering]
|
|
|
|
# Use mip mapping to scale textures. May slightly increase performance.
|
|
mip_map (Mipmapping) bool false
|
|
|
|
# Use anisotropic filtering when viewing at textures from an angle.
|
|
anisotropic_filter (Anisotropic filtering) bool false
|
|
|
|
# Use bilinear filtering when scaling textures.
|
|
bilinear_filter (Bilinear filtering) bool false
|
|
|
|
# Use trilinear filtering when scaling textures.
|
|
trilinear_filter (Trilinear filtering) bool false
|
|
|
|
# Filtered textures can blend RGB values with fully-transparent neighbors,
|
|
# which PNG optimizers usually discard, sometimes resulting in a dark or
|
|
# light edge to transparent textures. Apply this filter to clean that up
|
|
# at texture load time.
|
|
texture_clean_transparent (Clean transparent textures) bool false
|
|
|
|
# When using bilinear/trilinear/anisotropic filters, low-resolution textures
|
|
# can be blurred, so automatically upscale them with nearest-neighbor
|
|
# interpolation to preserve crisp pixels. This sets the minimum texture size
|
|
# for the upscaled textures; higher values look sharper, but require more
|
|
# memory. Powers of 2 are recommended. Setting this higher than 1 may not
|
|
# have a visible effect unless bilinear/trilinear/anisotropic filtering is
|
|
# enabled.
|
|
texture_min_size (Minimum texture size for filters) int 64
|
|
|
|
# Experimental option, might cause visible spaces between blocks
|
|
# when set to higher number than 0.
|
|
fsaa (FSAA) enum 0 0,1,2,4,8,16
|
|
|
|
[***Shaders]
|
|
|
|
# Shaders allow advanced visul effects and may increase performance on some video cards.
|
|
# Thy only work with the OpenGL video backend.
|
|
enable_shaders (Shaders) bool true
|
|
|
|
[****Tone Mapping]
|
|
|
|
# Enables filmic tone mapping
|
|
tone_mapping (Filmic tone mapping) bool false
|
|
|
|
[****Bumpmapping]
|
|
|
|
# Enables bumpmapping for textures. Normalmaps need to be supplied by the texture pack
|
|
# or need to be auto-generated.
|
|
# Requires shaders to be enabled.
|
|
enable_bumpmapping (Bumpmapping) bool false
|
|
|
|
# Enables on the fly normalmap generation (Emboss effect).
|
|
# Requires bumpmapping to be enabled.
|
|
generate_normalmaps (Generate normalmaps) bool false
|
|
|
|
# Strength of generated normalmaps.
|
|
normalmaps_strength (Normalmaps strength) float 0.6
|
|
|
|
# Defines sampling step of texture.
|
|
# A higher value results in smoother normal maps.
|
|
normalmaps_smooth (Normalmaps sampling) int 0 0 2
|
|
|
|
[****Parallax Occlusion]
|
|
|
|
# Enables parallax occlusion mapping.
|
|
# Requires shaders to be enabled.
|
|
enable_parallax_occlusion (Parallax occlusion) bool false
|
|
|
|
# 0 = parallax occlusion with slope information (faster).
|
|
# 1 = relief mapping (slower, more accurate).
|
|
parallax_occlusion_mode (Parallax occlusion mode) int 1 0 1
|
|
|
|
# Strength of parallax.
|
|
3d_parallax_strength (Parallax occlusion strength) float 0.025
|
|
|
|
# Number of parallax occlusion iterations.
|
|
parallax_occlusion_iterations (Parallax occlusion iterations) int 4
|
|
|
|
# Overall scale of parallax occlusion effect.
|
|
parallax_occlusion_scale (Parallax occlusion Scale) float 0.08
|
|
|
|
# Overall bias of parallax occlusion effect, usually scale/2.
|
|
parallax_occlusion_bias (Parallax occlusion bias) float 0.04
|
|
|
|
[****Waving Nodes]
|
|
|
|
# Set to true enables waving water.
|
|
# Requires shaders to be enabled.
|
|
enable_waving_water (Waving water) bool false
|
|
|
|
water_wave_height (Waving water height) float 1.0
|
|
|
|
water_wave_length (Waving water length) float 20.0
|
|
|
|
water_wave_speed (Waving water speed) float 5.0
|
|
|
|
# Set to true enables waving leaves.
|
|
# Requires shaders to be enabled.
|
|
enable_waving_leaves (Waving leaves) bool false
|
|
|
|
# Set to true enables waving plants.
|
|
# Requires shaders to be enabled.
|
|
enable_waving_plants (Waving plants) bool false
|
|
|
|
[***Advanced]
|
|
|
|
# If FPS would go higher than this, limit it by sleeping
|
|
# to not waste CPU power for no benefit.
|
|
fps_max (Maximum FPS) int 60
|
|
|
|
# Maximum FPS when game is paused.
|
|
pause_fps_max (FPS in pause menu) int 20
|
|
|
|
# View distance in nodes.
|
|
# Min = 20
|
|
viewing_range (Viewing range) int 100
|
|
|
|
# Width component of the initial window size.
|
|
screenW (Screen width) int 800
|
|
|
|
# Height component of the initial window size.
|
|
screenH (Screen height) int 600
|
|
|
|
# Fullscreen mode.
|
|
fullscreen (Full screen) bool false
|
|
|
|
# Bits per pixel (aka color depth) in fullscreen mode.
|
|
fullscreen_bpp (Full screen BPP) int 24
|
|
|
|
# Vertical screen synchronization.
|
|
vsync (V-Sync) bool false
|
|
|
|
# Field of view in degrees.
|
|
fov (Field of view) int 72 30 160
|
|
|
|
# Adjust the gamma encoding for the light tables. Lower numbers are brighter.
|
|
# This setting is for the client only and is ignored by the server.
|
|
display_gamma (Gamma) float 1.8 1.0 3.0
|
|
|
|
# Path to texture directory. All textures are first searched from here.
|
|
texture_path (Texture path) path
|
|
|
|
# The rendering back-end for Irrlicht.
|
|
video_driver (Video driver) enum opengl null,software,burningsvideo,direct3d8,direct3d9,opengl
|
|
|
|
# Height on which clouds are appearing.
|
|
cloud_height (Cloud height) int 120
|
|
|
|
# Radius of cloud area stated in number of 64 node cloud squares.
|
|
# Values larger than 26 will start to produce sharp cutoffs at cloud area corners.
|
|
cloud_radius (Cloud radius) int 12
|
|
|
|
# Multiplier for view bobbing.
|
|
# For example: 0 for no view bobbing; 1.0 for normal; 2.0 for double.
|
|
view_bobbing_amount (View bobbing) float 1.0
|
|
|
|
# Multiplier for fall bobbing.
|
|
# For example: 0 for no view bobbing; 1.0 for normal; 2.0 for double.
|
|
fall_bobbing_amount (Fall bobbing) float 0.0
|
|
|
|
# 3D support.
|
|
# Currently supported:
|
|
# - none: no 3d output.
|
|
# - anaglyph: cyan/magenta color 3d.
|
|
# - interlaced: odd/even line based polarisation screen support.
|
|
# - topbottom: split screen top/bottom.
|
|
# - sidebyside: split screen side by side.
|
|
# - pageflip: quadbuffer based 3d.
|
|
3d_mode (3D mode) enum none none,anaglyph,interlaced,topbottom,sidebyside,pageflip
|
|
|
|
# In-game chat console background color (R,G,B).
|
|
console_color (Console color) string (0,0,0)
|
|
|
|
# In-game chat console background alpha (opaqueness, between 0 and 255).
|
|
console_alpha (Console alpha) int 200 0 255
|
|
|
|
# Selection box border color (R,G,B).
|
|
selectionbox_color (Selection box color) string (0,0,0)
|
|
|
|
# Width of the selectionbox's lines around nodes.
|
|
selectionbox_width (Selection box width) int 2 1 5
|
|
|
|
# Crosshair color (R,G,B).
|
|
crosshair_color (Crosshair color) string (255,255,255)
|
|
|
|
# Crosshair alpha (opaqueness, between 0 and 255).
|
|
crosshair_alpha (Crosshair alpha) int 255 0 255
|
|
|
|
# Whether node texture animations should be desynchronized per mapblock.
|
|
desynchronize_mapblock_texture_animation (Desynchronize block animation) bool true
|
|
|
|
# Maximum proportion of current window to be used for hotbar.
|
|
# Useful if there's something to be displayed right or left of hotbar.
|
|
hud_hotbar_max_width (Maximum hotbar width) float 1.0
|
|
|
|
# Enables caching of facedir rotated meshes.
|
|
enable_mesh_cache (Mesh cache) bool false
|
|
|
|
# Enables minimap.
|
|
enable_minimap (Minimap) bool true
|
|
|
|
# Shape of the minimap. Enabled = round, disabled = square.
|
|
minimap_shape_round (Round minimap) bool true
|
|
|
|
# True = 256
|
|
# False = 128
|
|
# Useable to make minimap smoother on slower machines.
|
|
minimap_double_scan_height (Minimap scan height) bool true
|
|
|
|
# Make fog and sky colors depend on daytime (dawn/sunset) and view direction.
|
|
directional_colored_fog (Colored fog) bool true
|
|
|
|
# The strength (darkness) of node ambient-occlusion shading.
|
|
# Lower is darker, Higher is lighter. The valid range of values for this
|
|
# setting is 0.25 to 4.0 inclusive. If the value is out of range it will be
|
|
# set to the nearest valid value.
|
|
ambient_occlusion_gamma (Ambient occlusion gamma) float 2.2 0.25 4.0
|
|
|
|
# Enables animation of inventory items.
|
|
inventory_items_animations (Inventory items animations) bool false
|
|
|
|
[**Menus]
|
|
|
|
# Use a cloud animation for the main menu background.
|
|
menu_clouds (Clouds in menu) bool true
|
|
|
|
# Scale gui by a user specified value.
|
|
# Use a nearest-neighbor-anti-alias filter to scale the GUI.
|
|
# This will smooth over some of the rough edges, and blend
|
|
# pixels when scaling down, at the cost of blurring some
|
|
# edge pixels when images are scaled by non-integer sizes.
|
|
gui_scaling (GUI scaling) float 1.0
|
|
|
|
# When gui_scaling_filter is true, all GUI images need to be
|
|
# filtered in software, but some images are generated directly
|
|
# to hardware (e.g. render-to-texture for nodes in inventory).
|
|
gui_scaling_filter (GUI scaling filter) bool false
|
|
|
|
# When gui_scaling_filter_txr2img is true, copy those images
|
|
# from hardware to software for scaling. When false, fall back
|
|
# to the old scaling method, for video drivers that don't
|
|
# propery support downloading textures back from hardware.
|
|
gui_scaling_filter_txr2img (GUI scaling filter txr2img) bool true
|
|
|
|
# Delay showing tooltips, stated in milliseconds.
|
|
tooltip_show_delay (Tooltip delay) int 400
|
|
|
|
# Whether freetype fonts are used, requires freetype support to be compiled in.
|
|
freetype (Freetype fonts) bool true
|
|
|
|
# Path to TrueTypeFont or bitmap.
|
|
font_path (Font path) path fonts/liberationsans.ttf
|
|
|
|
font_size (Font size) int 15
|
|
|
|
# Font shadow offset, if 0 then shadow will not be drawn.
|
|
font_shadow (Font shadow) int 1
|
|
|
|
# Font shadow alpha (opaqueness, between 0 and 255).
|
|
font_shadow_alpha (Font shadow alpha) int 128 0 255
|
|
|
|
mono_font_path (Monospace font path) path fonts/liberationmono.ttf
|
|
|
|
mono_font_size (Monospace font size) int 15
|
|
|
|
# This font will be used for certain languages.
|
|
fallback_font_path (Fallback font) path fonts/DroidSansFallbackFull.ttf
|
|
fallback_font_size (Fallback font size) int 15
|
|
fallback_font_shadow (Fallback font shadow) int 1
|
|
fallback_font_shadow_alpha (Fallback font shadow alpha) int 128 0 255
|
|
|
|
# Path to save screenshots at.
|
|
screenshot_path (Screenshot folder) path
|
|
|
|
# Format of screenshots.
|
|
screenshot_format (Screenshot format) enum png png,jpg,bmp,pcx,ppm,tga
|
|
|
|
# Screenshot quality. Only used for JPEG format.
|
|
# 1 means worst quality; 100 means best quality.
|
|
# Use 0 for default quality.
|
|
screenshot_quality (Screenshot quality) int 0 0 100
|
|
|
|
[**Advanced]
|
|
|
|
# Adjust dpi configuration to your screen (non X11/Android only) e.g. for 4k screens.
|
|
screen_dpi (DPI) int 72
|
|
|
|
[*Sound]
|
|
|
|
enable_sound (Sound) bool true
|
|
|
|
sound_volume (Volume) float 0.7 0.0 1.0
|
|
|
|
[*Advanced]
|
|
|
|
# Timeout for client to remove unused map data from memory.
|
|
client_unload_unused_data_timeout (Mapblock unload timeout) int 600
|
|
|
|
# Maximum number of mapblocks for client to be kept in memory.
|
|
# Set to -1 for unlimited amount.
|
|
client_mapblock_limit (Mapblock limit) int 5000
|
|
|
|
# Whether to show the client debug info (has the same effect as hitting F5).
|
|
show_debug (Show debug info) bool false
|
|
|
|
[Server / Singleplayer]
|
|
|
|
# Name of the server, to be displayed when players join and in the serverlist.
|
|
server_name (Server name) string Minetest server
|
|
|
|
# Description of server, to be displayed when players join and in the serverlist.
|
|
server_description (Server description) string mine here
|
|
|
|
# Domain name of server, to be displayed in the serverlist.
|
|
server_address (Server address) string game.minetest.net
|
|
|
|
# Homepage of server, to be displayed in the serverlist.
|
|
server_url (Server URL) string http://minetest.net
|
|
|
|
# Automaticaly report to the serverlist.
|
|
server_announce (Announce server) bool false
|
|
|
|
# Announce to this serverlist.
|
|
# If you want to announce your ipv6 address, use serverlist_url = v6.servers.minetest.net.
|
|
serverlist_url (Serverlist URL) string servers.minetest.net
|
|
|
|
[*Network]
|
|
|
|
# Network port to listen (UDP).
|
|
# This value will be overridden when starting from the main menu.
|
|
port (Server port) int 30000
|
|
|
|
# The network interface that the server listens on.
|
|
bind_address (Bind address) string
|
|
|
|
# Enable to disallow old clients from connecting.
|
|
# Older clients are compatible in the sense that they will not crash when connecting
|
|
# to new servers, but they may not support all new features that you are expecting.
|
|
strict_protocol_version_checking (Strict protocol checking) bool false
|
|
|
|
# Specifies URL from which client fetches media instead of using UDP.
|
|
# $filename should be accessible from $remote_media$filename via cURL
|
|
# (obviously, remote_media should end with a slash).
|
|
# Files that are not present will be fetched the usual way.
|
|
remote_media (Remote media) string
|
|
|
|
# Enable/disable running an IPv6 server. An IPv6 server may be restricted
|
|
# to IPv6 clients, depending on system configuration.
|
|
# Ignored if bind_address is set.
|
|
ipv6_server (IPv6 server) bool false
|
|
|
|
[**Advanced]
|
|
|
|
# How many blocks are flying in the wire simultaneously per client.
|
|
max_simultaneous_block_sends_per_client (Maximum simultaneously blocks send per client) int 10
|
|
|
|
# How many blocks are flying in the wire simultaneously for the whole server.
|
|
max_simultaneous_block_sends_server_total (Maximum simultaneously bocks send total) int 40
|
|
|
|
# To reduce lag, block transfers are slowed down when a player is building something.
|
|
# This determines how long they are slowed down after placing or removing a node.
|
|
full_block_send_enable_min_time_from_building () float 2.0
|
|
|
|
# Maximum number of packets sent per send step, if you have a slow connection
|
|
# try reducing it, but don't reduce it to a number below double of targeted
|
|
# client number.
|
|
max_packets_per_iteration (Max. packets per iteration) int 1024
|
|
|
|
[*Game]
|
|
|
|
# Default game when creating a new world.
|
|
# This will be overridden when creating a world from the main menu.
|
|
default_game (Default game) string minetest
|
|
|
|
# Message of the day displayed to players connecting.
|
|
motd (Message of the day) string
|
|
|
|
# Maximum number of players that can connect simultaneously.
|
|
max_users (Maximum users) int 15
|
|
|
|
# World directory (everything in the world is stored here).
|
|
# Not needed if starting from the main menu.
|
|
map-dir (Map directory) path
|
|
|
|
# Time in seconds for item entity (dropped items) to live.
|
|
# Setting it to -1 disables the feature.
|
|
item_entity_ttl (Item entity TTL) int 900
|
|
|
|
# Enable players getting damage and dying.
|
|
enable_damage (Damage) bool false
|
|
|
|
# A chosen map seed for a new map, leave empty for random.
|
|
# Will be overridden when creating a new world in the main menu.
|
|
fixed_map_seed (Fixed map seed) string
|
|
|
|
# New users need to input this password.
|
|
default_password (Default password) string
|
|
|
|
# The privileges that new users automatically get.
|
|
# See /privs in game for a full list on your server and mod configuration.
|
|
default_privs (Default privileges) string interact, shout
|
|
|
|
# Whether players are shown to clients without any range limit.
|
|
# Deprecated, use the setting player_transfer_distance instead.
|
|
unlimited_player_transfer_distance (Unlimited player transfer distance) bool true
|
|
|
|
# Defines the maximal player transfer distance in blocks (0 = unlimited).
|
|
player_transfer_distance (Player transfer distance) int 0
|
|
|
|
# Whether to allow players to damage and kill each other.
|
|
enable_pvp (Player versus Player) bool true
|
|
|
|
# If this is set, players will always (re)spawn at the given position.
|
|
static_spawnpoint (Static spawnpoint) string
|
|
|
|
# If enabled, new players cannot join with an empty password.
|
|
disallow_empty_password (Disallow empty passwords) bool false
|
|
|
|
# If enabled, disable cheat prevention in multiplayer.
|
|
disable_anticheat (Disable anticheat) bool false
|
|
|
|
# If enabled, actions are recorded for rollback.
|
|
# This option is only read when server starts.
|
|
enable_rollback_recording (Rollback recording) bool false
|
|
|
|
# A message to be displayed to all clients when the server shuts down.
|
|
kick_msg_shutdown (Shutdown message) string Server shutting down.
|
|
|
|
# A message to be displayed to all clients when the server crashes.
|
|
kick_msg_crash (Crash message) string This server has experienced an internal error. You will now be disconnected.
|
|
|
|
# Whether to ask clients to reconnect after a (Lua) crash.
|
|
# Set this to true if your server is set up to restart automatically.
|
|
ask_reconnect_on_crash (Ask to reconnect after crash) bool false
|
|
|
|
# From how far clients know about objects, stated in mapblocks (16 nodes).
|
|
active_object_send_range_blocks (Active object send range) int 3
|
|
|
|
# How large area of blocks are subject to the active block stuff, stated in mapblocks (16 nodes).
|
|
# In active blocks objects are loaded and ABMs run.
|
|
active_block_range (Active block range) int 2
|
|
|
|
# From how far blocks are sent to clients, stated in mapblocks (16 nodes).
|
|
max_block_send_distance (Max block send distance) int 10
|
|
|
|
# Maximum number of forceloaded mapblocks.
|
|
max_forceloaded_blocks (Maximum forceloaded blocks) int 16
|
|
|
|
# Interval of sending time of day to clients.
|
|
time_send_interval (Time send interval) int 5
|
|
|
|
# Controls length of day/night cycle.
|
|
# Examples: 72 = 20min, 360 = 4min, 1 = 24hour, 0 = day/night/whatever stays unchanged.
|
|
time_speed (Time speed) int 72
|
|
|
|
# Interval of saving important changes in the world, stated in seconds.
|
|
server_map_save_interval (Map save interval) float 5.3
|
|
|
|
[**Physics]
|
|
|
|
movement_acceleration_default (Default acceleration) float 3
|
|
movement_acceleration_air (Acceleration in air) float 2
|
|
movement_acceleration_fast (Fast mode acceleration) float 10
|
|
movement_speed_walk (Walking speed) float 4
|
|
movement_speed_crouch (Crouch speed) float 1.35
|
|
movement_speed_fast (Fast mode speed) float 20
|
|
movement_speed_climb (Climbing speed) float 2
|
|
movement_speed_jump (Jumping speed) float 6.5
|
|
movement_speed_descend (Descending speed) float 6
|
|
movement_liquid_fluidity (Liquid fluidity) float 1
|
|
movement_liquid_fluidity_smooth (Liquid fluidity smoothing) float 0.5
|
|
movement_liquid_sink (Liquid sink) float 10
|
|
movement_gravity (Gravity) float 9.81
|
|
|
|
[**Advanced]
|
|
|
|
# Handling for deprecated lua api calls:
|
|
# - legacy: (try to) mimic old behaviour (default for release).
|
|
# - log: mimic and log backtrace of deprecated call (default for debug).
|
|
# - error: abort on usage of deprecated call (suggested for mod developers).
|
|
deprecated_lua_api_handling (Deprecated Lua API handling) enum legacy legacy,log,error
|
|
|
|
# Useful for mod developers.
|
|
mod_profiling (Mod profiling) bool false
|
|
|
|
# Detailed mod profile data. Useful for mod developers.
|
|
detailed_profiling (Detailed mod profiling) bool false
|
|
|
|
# Profiler data print interval. 0 = disable. Useful for developers.
|
|
profiler_print_interval (Profiling print interval) int 0
|
|
|
|
# Number of extra blocks that can be loaded by /clearobjects at once.
|
|
# This is a trade-off between sqlite transaction overhead and
|
|
# memory consumption (4096=100MB, as a rule of thumb).
|
|
max_clearobjects_extra_loaded_blocks (Max. clearobjects extra blocks) int 4096
|
|
|
|
# How much the server will wait before unloading unused mapblocks.
|
|
# Higher value is smoother, but will use more RAM.
|
|
server_unload_unused_data_timeout (Unload unused server data) int 29
|
|
|
|
# Maximum number of statically stored objects in a block.
|
|
max_objects_per_block (Maxmimum objects per block) int 49
|
|
|
|
# See http://www.sqlite.org/pragma.html#pragma_synchronous
|
|
sqlite_synchronous (Synchronous SQLite) enum 2 0,1,2
|
|
|
|
# Length of a server tick and the interval at which objects are generally updated over network.
|
|
dedicated_server_step (Dedicated server step) float 0.1
|
|
|
|
# Time in between active block management cycles
|
|
active_block_mgmt_interval (Active Block Management interval) float 2.0
|
|
|
|
# Length of time between ABM execution cycles
|
|
abm_interval (Active Block Modifier interval) float 1.0
|
|
|
|
# Length of time between NodeTimer execution cycles
|
|
nodetimer_interval (NodeTimer interval) float 1.0
|
|
|
|
# If enabled, invalid world data won't cause the server to shut down.
|
|
# Only enable this if you know what you are doing.
|
|
ignore_world_load_errors (Ignore world errors) bool false
|
|
|
|
# Max liquids processed per step.
|
|
liquid_loop_max (Liquid loop max) int 100000
|
|
|
|
# The time (in seconds) that the liquids queue may grow beyond processing
|
|
# capacity until an attempt is made to decrease its size by dumping old queue
|
|
# items. A value of 0 disables the functionality.
|
|
liquid_queue_purge_time (Liquid queue purge time) int 0
|
|
|
|
# Liquid update interval in seconds.
|
|
liquid_update (Liquid update tick) float 1.0
|
|
|
|
[*Mapgen]
|
|
|
|
# Name of map generator to be used when creating a new world.
|
|
# Creating a world in the main menu will override this.
|
|
mg_name (Mapgen name) enum v6 v5,v6,v7,flat,valleys,fractal,singlenode
|
|
|
|
# Water surface level of the world.
|
|
water_level (Water level) int 1
|
|
|
|
# From how far blocks are generated for clients, stated in mapblocks (16 nodes).
|
|
max_block_generate_distance (Max block generate distance) int 6
|
|
|
|
# Where the map generator stops.
|
|
# Please note:
|
|
# - Limited to 31000 (setting above has no effect)
|
|
# - The map generator works in groups of 80x80x80 nodes (5x5x5 MapBlocks).
|
|
# - Those groups have an offset of -32, -32 nodes from the origin.
|
|
# - Only groups which are within the map_generation_limit are generated
|
|
map_generation_limit (Map generation limit) int 31000 0 31000
|
|
|
|
# Global map generation attributes.
|
|
# In Mapgen v6 the 'decorations' flag controls all decorations except trees
|
|
# and junglegrass, in all other mapgens this flag controls all decorations.
|
|
# The default flags set in the engine are: caves, light, decorations
|
|
# The flags string modifies the engine defaults.
|
|
# Flags that are not specified in the flag string are not modified from the default.
|
|
# Flags starting with 'no' are used to explicitly disable them.
|
|
mg_flags (Mapgen flags) flags caves,dungeons,light,decorations caves,dungeons,light,decorations,nocaves,nodungeons,nolight,nodecorations
|
|
|
|
[**Advanced]
|
|
|
|
# Size of chunks to be generated at once by mapgen, stated in mapblocks (16 nodes).
|
|
chunksize (Chunk size) int 5
|
|
|
|
# Dump the mapgen debug infos.
|
|
enable_mapgen_debug_info (Mapgen debug) bool false
|
|
|
|
# Maximum number of blocks that can be queued for loading.
|
|
emergequeue_limit_total (Absolute limit of emerge queues) int 256
|
|
|
|
# Maximum number of blocks to be queued that are to be loaded from file.
|
|
# Set to blank for an appropriate amount to be chosen automatically.
|
|
emergequeue_limit_diskonly (Limit of emerge queues on disk) int 32
|
|
|
|
# Maximum number of blocks to be queued that are to be generated.
|
|
# Set to blank for an appropriate amount to be chosen automatically.
|
|
emergequeue_limit_generate (Limit of emerge queues to generate) int 32
|
|
|
|
# Number of emerge threads to use. Make this field blank, or increase this number
|
|
# to use multiple threads. On multiprocessor systems, this will improve mapgen speed greatly
|
|
# at the cost of slightly buggy caves.
|
|
num_emerge_threads (Number of emerge threads) int 1
|
|
|
|
# Noise parameters for biome API temperature, humidity and biome blend.
|
|
mg_biome_np_heat (Mapgen biome heat noise parameters) noise_params 50, 50, (750, 750, 750), 5349, 3, 0.5, 2.0
|
|
mg_biome_np_heat_blend (Mapgen heat blend noise parameters) noise_params 0, 1.5, (8, 8, 8), 13, 2, 1.0, 2.0
|
|
mg_biome_np_humidity (Mapgen biome humidity noise parameters) noise_params 50, 50, (750, 750, 750), 842, 3, 0.5, 2.0
|
|
mg_biome_np_humidity_blend (Mapgen biome humidity blend noise parameters) noise_params 0, 1.5, (8, 8, 8), 90003, 2, 1.0, 2.0
|
|
|
|
[***Mapgen v5]
|
|
|
|
mgv5_np_filler_depth (Mapgen v5 filler depth noise parameters) noise_params 0, 1, (150, 150, 150), 261, 4, 0.7, 2.0
|
|
mgv5_np_factor (Mapgen v5 factor noise parameters) noise_params 0, 1, (250, 250, 250), 920381, 3, 0.45, 2.0
|
|
mgv5_np_height (Mapgen v5 height noise parameters) noise_params 0, 10, (250, 250, 250), 84174, 4, 0.5, 2.0
|
|
mgv5_np_cave1 (Mapgen v5 cave1 noise parameters) noise_params 0, 12, (50, 50, 50), 52534, 4, 0.5, 2.0
|
|
mgv5_np_cave2 (Mapgen v5 cave2 noise parameters) noise_params 0, 12, (50, 50, 50), 10325, 4, 0.5, 2.0
|
|
# TODO
|
|
#mgv5_np_ground = {
|
|
# offset = 0
|
|
# scale = 40
|
|
# spread = (80, 80, 80)
|
|
# seed = 983240
|
|
# octaves = 4
|
|
# persistence = 0.55
|
|
# lacunarity = 2.0
|
|
# flags = "eased"
|
|
#}
|
|
|
|
[***Mapgen v6]
|
|
|
|
# Map generation attributes specific to Mapgen v6.
|
|
# When snowbiomes are enabled jungles are automatically enabled, the 'jungles' flag is ignored.
|
|
# The default flags set in the engine are: biomeblend, mudflow
|
|
# The flags string modifies the engine defaults.
|
|
# Flags that are not specified in the flag string are not modified from the default.
|
|
# Flags starting with 'no' are used to explicitly disable them.
|
|
mgv6_spflags (Mapgen v6 flags) flags jungles,biomeblend,mudflow,snowbiomes,trees jungles,biomeblend,mudflow,snowbiomes,flat,trees,nojungles,nobiomeblend,nomudflow,nosnowbiomes,noflat,notrees
|
|
|
|
# Controls size of deserts and beaches in Mapgen v6.
|
|
# When snowbiomes are enabled 'mgv6_freq_desert' is ignored.
|
|
mgv6_freq_desert (Mapgen v6 desert frequency) float 0.45
|
|
mgv6_freq_beach (Mapgen v6 beach frequency) float 0.15
|
|
|
|
mgv6_np_terrain_base (Mapgen v6 terrain base noise parameters) noise_params -4, 20, (250, 250, 250), 82341, 5, 0.6, 2.0
|
|
mgv6_np_terrain_higher (Mapgen v6 terrain altitude noise parameters) noise_params 20, 16, (500, 500, 500), 85039, 5, 0.6, 2.0
|
|
mgv6_np_steepness (Mapgen v6 steepness noise parameters) noise_params 0.85, 0.5, (125, 125, 125), -932, 5, 0.7, 2.0
|
|
mgv6_np_height_select (Mapgen v6 height select noise parameters) noise_params 0.5, 1, (250, 250, 250), 4213, 5, 0.69, 2.0
|
|
mgv6_np_mud (Mapgen v6 mud noise parameters) noise_params 4, 2, (200, 200, 200), 91013, 3, 0.55, 2.0
|
|
mgv6_np_beach (Mapgen v6 beach noise parameters) noise_params 0, 1, (250, 250, 250), 59420, 3, 0.50, 2.0
|
|
mgv6_np_biome (Mapgen v6 biome noise parameters) noise_params 0, 1, (500, 500, 500), 9130, 3, 0.50, 2.0
|
|
mgv6_np_cave (Mapgen v6 cave noise parameters) noise_params 6, 6, (250, 250, 250), 34329, 3, 0.50, 2.0
|
|
mgv6_np_humidity (Mapgen v6 humidity noise parameters) noise_params 0.5, 0.5, (500, 500, 500), 72384, 3, 0.50, 2.0
|
|
mgv6_np_trees (Mapgen v6 trees noise parameters) noise_params 0, 1, (125, 125, 125), 2, 4, 0.66, 2.0
|
|
mgv6_np_apple_trees (Mapgen v6 apple trees noise parameters) noise_params 0, 1, (100, 100, 100), 342902, 3, 0.45, 2.0
|
|
|
|
[***Mapgen v7]
|
|
|
|
# Map generation attributes specific to Mapgen v7.
|
|
# The 'ridges' flag controls the rivers.
|
|
# The default flags set in the engine are: mountains, ridges
|
|
# The flags string modifies the engine defaults.
|
|
# Flags that are not specified in the flag string are not modified from the default.
|
|
# Flags starting with 'no' are used to explicitly disable them.
|
|
mgv7_spflags (Mapgen v7 flags) flags mountains,ridges mountains,ridges,nomountains,noridges
|
|
|
|
mgv7_np_terrain_base (Mapgen v7 terrain base noise parameters) noise_params 4, 70, (600, 600, 600), 82341, 5, 0.6, 2.0
|
|
mgv7_np_terrain_alt (Mapgen v7 terrain altitude noise parameters) noise_params 4, 25, (600, 600, 600), 5934, 5, 0.6, 2.0
|
|
mgv7_np_terrain_persist (Mapgen v7 terrain persistation noise parameters) noise_params 0.6, 0.1, (2000, 2000, 2000), 539, 3, 0.6, 2.0
|
|
mgv7_np_height_select (Mapgen v7 height select noise parameters) noise_params -12, 24, (500, 500, 500), 4213, 6, 0.7, 2.0
|
|
mgv7_np_filler_depth (Mapgen v7 filler depth noise parameters) noise_params 0, 1.2, (150, 150, 150), 261, 3, 0.7, 2.0
|
|
mgv7_np_mount_height (Mapgen v7 mount height noise parameters) noise_params 256, 112, (1000, 1000, 1000), 72449, 3, 0.6, 2.0
|
|
mgv7_np_ridge_uwater (Mapgen v7 ridge water noise parameters) noise_params 0, 1, (1000, 1000, 1000), 85039, 5, 0.6, 2.0
|
|
mgv7_np_mountain (Mapgen v7 mountain noise parameters) noise_params -0.6, 1, (250, 350, 250), 5333, 5, 0.63, 2.0
|
|
mgv7_np_ridge (Mapgen v7 ridge noise parameters) noise_params 0, 1, (100, 100, 100), 6467, 4, 0.75, 2.0
|
|
mgv7_np_cave1 (Mapgen v7 cave1 noise parameters) noise_params 0, 12, (100, 100, 100), 52534, 4, 0.5, 2.0
|
|
mgv7_np_cave2 (Mapgen v7 cave2 noise parameters) noise_params 0, 12, (100, 100, 100), 10325, 4, 0.5, 2.0
|
|
|
|
[***Mapgen flat]
|
|
|
|
# Map generation attributes specific to Mapgen flat.
|
|
# Occasional lakes and hills can be added to the flat world.
|
|
# The default flags set in the engine are: none
|
|
# The flags string modifies the engine defaults.
|
|
# Flags that are not specified in the flag string are not modified from the default.
|
|
# Flags starting with 'no' are used to explicitly disable them.
|
|
mgflat_spflags (Mapgen flat flags) flags lakes,hills,,nolakes,nohills
|
|
|
|
# Y of flat ground.
|
|
mgflat_ground_level (Mapgen flat ground level) int 8
|
|
|
|
# Y of upper limit of large pseudorandom caves.
|
|
mgflat_large_cave_depth (Mapgen flat large cave depth) int -33
|
|
|
|
# Terrain noise threshold for lakes.
|
|
# Controls proportion of world area covered by lakes.
|
|
# Adjust towards 0.0 for a larger proportion.
|
|
mgflat_lake_threshold (Mapgen flat lake threshold) float -0.45
|
|
|
|
# Controls steepness/depth of lake depressions.
|
|
mgflat_lake_steepness (Mapgen flat lake steepness) float 48.0
|
|
|
|
# Terrain noise threshold for hills.
|
|
# Controls proportion of world area covered by hills.
|
|
# Adjust towards 0.0 for a larger proportion.
|
|
mgflat_hill_threshold (Mapgen flat hill threshold) float 0.45
|
|
|
|
# Controls steepness/height of hills.
|
|
mgflat_hill_steepness (Mapgen flat hill steepness) float 64.0
|
|
|
|
# Determines terrain shape.
|
|
# The 3 numbers in brackets control the scale of the
|
|
# terrain, the 3 numbers should be identical.
|
|
mgflat_np_terrain (Mapgen flat terrain noise parameters) noise_params 0, 1, (600, 600, 600), 7244, 5, 0.6, 2.0
|
|
|
|
mgflat_np_filler_depth (Mapgen flat filler depth noise parameters) noise_params 0, 1.2, (150, 150, 150), 261, 3, 0.7, 2.0
|
|
mgflat_np_cave1 (Mapgen flat cave1 noise parameters) noise_params 0, 12, (128, 128, 128), 52534, 4, 0.5, 2.0
|
|
mgflat_np_cave2 (Mapgen flat cave2 noise parameters) noise_params 0, 12, (128, 128, 128), 10325, 4, 0.5, 2.0
|
|
|
|
[***Mapgen fractal]
|
|
|
|
# Choice of 18 fractals from 9 formulas.
|
|
# 1 = 4D "Roundy" mandelbrot set.
|
|
# 2 = 4D "Roundy" julia set.
|
|
# 3 = 4D "Squarry" mandelbrot set.
|
|
# 4 = 4D "Squarry" julia set.
|
|
# 5 = 4D "Mandy Cousin" mandelbrot set.
|
|
# 6 = 4D "Mandy Cousin" julia set.
|
|
# 7 = 4D "Variation" mandelbrot set.
|
|
# 8 = 4D "Variation" julia set.
|
|
# 9 = 3D "Mandelbrot/Mandelbar" mandelbrot set.
|
|
# 10 = 3D "Mandelbrot/Mandelbar" julia set.
|
|
# 11 = 3D "Christmas Tree" mandelbrot set.
|
|
# 12 = 3D "Christmas Tree" julia set.
|
|
# 13 = 3D "Mandelbulb" mandelbrot set.
|
|
# 14 = 3D "Mandelbulb" julia set.
|
|
# 15 = 3D "Cosine Mandelbulb" mandelbrot set.
|
|
# 16 = 3D "Cosine Mandelbulb" julia set.
|
|
# 17 = 4D "Mandelbulb" mandelbrot set.
|
|
# 18 = 4D "Mandelbulb" julia set.
|
|
mgfractal_fractal (Mapgen fractal fractal) int 1 1 18
|
|
|
|
# Iterations of the recursive function.
|
|
# Controls the amount of fine detail.
|
|
mgfractal_iterations (Mapgen fractal iterations) int 11
|
|
|
|
# Approximate (X,Y,Z) scale of fractal in nodes.
|
|
mgfractal_scale (Mapgen fractal scale) v3f (4096.0, 1024.0, 4096.0)
|
|
|
|
# (X,Y,Z) offset of fractal from world centre in units of 'scale'.
|
|
# Used to move a suitable spawn area of low land close to (0, 0).
|
|
# The default is suitable for mandelbrot sets, it needs to be edited for julia sets.
|
|
# Range roughly -2 to 2. Multiply by 'scale' for offset in nodes.
|
|
mgfractal_offset (Mapgen fractal offset) v3f (1.79, 0.0, 0.0)
|
|
|
|
# W co-ordinate of the generated 3D slice of a 4D fractal.
|
|
# Determines which 3D slice of the 4D shape is generated.
|
|
# Has no effect on 3D fractals.
|
|
# Range roughly -2 to 2.
|
|
mgfractal_slice_w (Mapgen fractal slice w) float 0.0
|
|
|
|
# Julia set only: X component of hypercomplex constant determining julia shape.
|
|
# Range roughly -2 to 2.
|
|
mgfractal_julia_x (Mapgen fractal julia x) float 0.33
|
|
|
|
# Julia set only: Y component of hypercomplex constant determining julia shape.
|
|
# Range roughly -2 to 2.
|
|
mgfractal_julia_y (Mapgen fractal julia y) float 0.33
|
|
|
|
# Julia set only: Z component of hypercomplex constant determining julia shape.
|
|
# Range roughly -2 to 2.
|
|
mgfractal_julia_z (Mapgen fractal julia z) float 0.33
|
|
|
|
# Julia set only: W component of hypercomplex constant determining julia shape.
|
|
# Has no effect on 3D fractals.
|
|
# Range roughly -2 to 2.
|
|
mgfractal_julia_w (Mapgen fractal julia w) float 0.33
|
|
|
|
mgfractal_np_seabed (Mapgen fractal seabed noise parameters) noise_params -14, 9, (600, 600, 600), 41900, 5, 0.6, 2.0
|
|
mgfractal_np_filler_depth (Mapgen fractal filler depth noise parameters) noise_params 0, 1.2, (150, 150, 150), 261, 3, 0.7, 2.0
|
|
mgfractal_np_cave1 (Mapgen fractal cave1 noise parameters) noise_params 0, 12, (128, 128, 128), 52534, 4, 0.5, 2.0
|
|
mgfractal_np_cave2 (Mapgen fractal cave2 noise parameters) noise_params 0, 12, (128, 128, 128), 10325, 4, 0.5, 2.0
|
|
|
|
# Mapgen Valleys parameters
|
|
[***Mapgen Valleys]
|
|
|
|
# General parameters
|
|
[****General]
|
|
|
|
# Map generation attributes specific to Mapgen Valleys.
|
|
# 'altitude_chill' makes higher elevations colder, which may cause biome issues.
|
|
# 'humid_rivers' modifies the humidity around rivers and in areas where water would tend to pool,
|
|
# it may interfere with delicately adjusted biomes.
|
|
# The default flags set in the engine are: altitude_chill, humid_rivers
|
|
# The flags string modifies the engine defaults.
|
|
# Flags that are not specified in the flag string are not modified from the default.
|
|
# Flags starting with 'no' are used to explicitly disable them.
|
|
mg_valleys_spflags (Valleys C Flags) flags altitude_chill,humid_rivers altitude_chill,noaltitude_chill,humid_rivers,nohumid_rivers
|
|
|
|
# The altitude at which temperature drops by 20C
|
|
mg_valleys_altitude_chill (Altitude Chill) int 90
|
|
|
|
# Depth below which you'll find large caves.
|
|
mg_valleys_large_cave_depth (Large cave depth) int -33
|
|
|
|
# Creates unpredictable lava features in caves.
|
|
# These can make mining difficult. Zero disables them. (0-10)
|
|
mg_valleys_lava_features (Lava Features) int 0
|
|
|
|
# Depth below which you'll find massive caves.
|
|
mg_valleys_massive_cave_depth (Massive cave depth) int -256
|
|
|
|
# How deep to make rivers
|
|
mg_valleys_river_depth (River Depth) int 4
|
|
|
|
# How wide to make rivers
|
|
mg_valleys_river_size (River Size) int 5
|
|
|
|
# Creates unpredictable water features in caves.
|
|
# These can make mining difficult. Zero disables them. (0-10)
|
|
mg_valleys_water_features (Water Features) int 0
|
|
|
|
# Noise parameters
|
|
[****Noises]
|
|
|
|
# Caves and tunnels form at the intersection of the two noises
|
|
mg_valleys_np_cave1 (Cave noise #1) noise_params 0, 12, (100, 100, 100), 52534, 4, 0.5, 2.0
|
|
|
|
# Caves and tunnels form at the intersection of the two noises
|
|
mg_valleys_np_cave2 (Cave noise #2) noise_params 0, 12, (100, 100, 100), 10325, 4, 0.5, 2.0
|
|
|
|
# The depth of dirt or other filler
|
|
mg_valleys_np_filler_depth (Filler Depth) noise_params 0, 1.2, (256, 256, 256), 1605, 3, 0.5, 2.0
|
|
|
|
# Massive caves form here.
|
|
mg_valleys_np_massive_caves (Massive cave noise) noise_params 0, 1, (768, 256, 768), 59033, 6, 0.63, 2.0
|
|
|
|
# River noise -- rivers occur close to zero
|
|
mg_valleys_np_rivers (River Noise) noise_params 0, 1, (256, 256, 256), -6050, 5, 0.6, 2.0
|
|
|
|
# Base terrain height
|
|
mg_valleys_np_terrain_height (Terrain Height) noise_params -10, 50, (1024, 1024, 1024), 5202, 6, 0.4, 2.0
|
|
|
|
# Raises terrain to make valleys around the rivers
|
|
mg_valleys_np_valley_depth (Valley Depth) noise_params 5, 4, (512, 512, 512), -1914, 1, 1.0, 2.0
|
|
|
|
# Slope and fill work together to modify the heights
|
|
mg_valleys_np_inter_valley_fill (Valley Fill) noise_params 0, 1, (256, 512, 256), 1993, 6, 0.8, 2.0
|
|
|
|
# Amplifies the valleys
|
|
mg_valleys_np_valley_profile (Valley Profile) noise_params 0.6, 0.5, (512, 512, 512), 777, 1, 1.0, 2.0
|
|
|
|
# Slope and fill work together to modify the heights
|
|
mg_valleys_np_inter_valley_slope (Valley Slope) noise_params 0.5, 0.5, (128, 128, 128), 746, 1, 1.0, 2.0
|
|
|
|
[*Security]
|
|
|
|
# Prevent mods from doing insecure things like running shell commands.
|
|
secure.enable_security (Enable mod security) bool false
|
|
|
|
# Comma-separated list of trusted mods that are allowed to access insecure
|
|
# functions even when mod security is on (via request_insecure_environment()).
|
|
secure.trusted_mods (Trusted mods) string
|
|
|
|
# Comma-seperated list of mods that are allowed to access HTTP APIs, which
|
|
# allow them to upload and download data to/from the internet.
|
|
secure.http_mods (HTTP Mods) string
|
|
|
|
[Client and Server]
|
|
|
|
# Name of the player.
|
|
# When running a server, clients connecting with this name are admins.
|
|
# When starting from the main menu, this is overridden.
|
|
name (Player name) string
|
|
|
|
# Set the language. Leave empty to use the system language.
|
|
# A restart is required after changing this.
|
|
language (Language) enum ,be,cs,da,de,eo,es,et,fr,hu,id,it,ja,jbo,ko,ky,lt,nb,nl,pl,pt,pt_BR,ro,ru,tr,uk,zh_CN,zh_TW
|
|
|
|
# Level of logging to be written to debug.txt:
|
|
# - <nothing> (no logging)
|
|
# - none (messages with no level)
|
|
# - error
|
|
# - warning
|
|
# - action
|
|
# - info
|
|
# - verbose
|
|
debug_log_level (Debug log level) enum action ,warning,action,info,verbose
|
|
|
|
# IPv6 support.
|
|
enable_ipv6 (IPv6) bool true
|
|
|
|
[*Advanced]
|
|
|
|
# Default timeout for cURL, stated in milliseconds.
|
|
# Only has an effect if compiled with cURL.
|
|
curl_timeout (cURL timeout) int 5000
|
|
|
|
# Limits number of parallel HTTP requests. Affects:
|
|
# - Media fetch if server uses remote_media setting.
|
|
# - Serverlist download and server announcement.
|
|
# - Downloads performed by main menu (e.g. mod manager).
|
|
# Only has an effect if compiled with cURL.
|
|
curl_parallel_limit (cURL parallel limit) int 8
|
|
|
|
# Maximum time in ms a file download (e.g. a mod download) may take.
|
|
curl_file_download_timeout (cURL file download timeout) int 300000
|
|
|
|
# Makes DirectX work with LuaJIT. Disable if it causes troubles.
|
|
high_precision_fpu (High-precision FPU) bool true
|
|
|
|
# Replaces the default main menu with a custom one.
|
|
main_menu_script (Main menu script) string
|
|
|
|
main_menu_game_mgr (Main menu game manager) int 0
|
|
|
|
main_menu_mod_mgr (Main menu mod manager) int 1
|
|
|
|
modstore_download_url (Modstore download URL) string https://forum.minetest.net/media/
|
|
|
|
modstore_listmods_url (Modstore mods list URL) string https://forum.minetest.net/mmdb/mods/
|
|
|
|
modstore_details_url (Modstore details URL) string https://forum.minetest.net/mmdb/mod/*/
|