configuration updates; making to build on msvc

minetest.conf.example

@@ -29,19 +29,6 @@
 
 #map-dir = /home/palle/custom_map
 
-# - The possible generators are:
-# (Indeed you can do all of them with only "power" 8))
-# H=value:
-#     constant <value>
-# H=slope.dot(pos):
-#     linear <height> <slope.X> <slope.Y>
-# H=slope.dot(pos^power):
-#     power <height> <slope.X> <slope.Y> <power>
-
-#mapgen_heightmap_blocksize = 32
-#height_randmax = constant 50.0
-#height_randfactor = constant 0.6
-#height_base = linear 0 0 0
 #plants_amount = 1.0
 #ravines_amount = 1.0
 #coal_amount = 1.0
@@ -59,10 +46,6 @@
 #max_block_send_distance = 5
 #max_block_generate_distance = 4
 
-#disable_water_climb = true
-# Note that this gets applied at map generation time
-#endless_water = true
-
 # 20 min/day
 #time_speed = 72
 # 4 min/day

src/defaultsettings.cpp

@@ -41,19 +41,6 @@ void set_default_settings()
 	// Server stuff
 	g_settings.setDefault("creative_mode", "false");
 	g_settings.setDefault("haxmode", "false");
-	/*g_settings.setDefault("heightmap_blocksize", "32");
-	g_settings.setDefault("height_randmax", "constant 45.0");
-	g_settings.setDefault("height_randfactor", "constant 0.6");
-	g_settings.setDefault("height_base", "linear 0 0 0");
-	g_settings.setDefault("plants_amount", "1.0");
-	g_settings.setDefault("ravines_amount", "1.0");
-	g_settings.setDefault("coal_amount", "1.0");*/
-	g_settings.setDefault("heightmap_blocksize", "16");
-	//g_settings.setDefault("height_randmax", "linear 0 0 30");
-	g_settings.setDefault("height_randmax", "linear 0.5 0 0");
-	//g_settings.setDefault("height_randfactor", "linear 0.50 -0.10 0");
-	g_settings.setDefault("height_randfactor", "linear 0.60 0 0");
-	g_settings.setDefault("height_base", "linear 5 0 0");
 	g_settings.setDefault("plants_amount", "1.0");
 	g_settings.setDefault("ravines_amount", "0");
 	g_settings.setDefault("coal_amount", "1.0");
@@ -62,9 +49,6 @@ void set_default_settings()
 	g_settings.setDefault("active_object_range", "2");
 	g_settings.setDefault("max_simultaneous_block_sends_per_client", "1");
 	g_settings.setDefault("max_simultaneous_block_sends_server_total", "4");
-	//g_settings.setDefault("water_moves", "true");
-	//g_settings.setDefault("disable_water_climb", "true");
-	//g_settings.setDefault("endless_water", "true");
 	g_settings.setDefault("max_block_send_distance", "6");
 	g_settings.setDefault("max_block_generate_distance", "6");
 	g_settings.setDefault("time_send_interval", "20");

src/main.cpp

@@ -221,6 +221,8 @@ TODO: Map generator version 2
 FIXME: The new pre-sunlight-propagation code messes up with initial
        water lighting
 
+TODO: Remove HMParams
+
 Doing now:
 ======================================================================
 
@@ -1269,10 +1271,10 @@ int main(int argc, char *argv[])
 	// Read map parameters from settings
 
 	HMParams hm_params;
-	hm_params.blocksize = g_settings.getU16("heightmap_blocksize");
+	/*hm_params.blocksize = g_settings.getU16("heightmap_blocksize");
 	hm_params.randmax = g_settings.get("height_randmax");
 	hm_params.randfactor = g_settings.get("height_randfactor");
-	hm_params.base = g_settings.get("height_base");
+	hm_params.base = g_settings.get("height_base");*/
 
 	MapParams map_params;
 	map_params.plants_amount = g_settings.getFloat("plants_amount");

src/servermain.cpp

@@ -259,10 +259,10 @@ int main(int argc, char *argv[])
 	// Read map parameters from settings
 
 	HMParams hm_params;
-	hm_params.blocksize = g_settings.getU16("heightmap_blocksize");
+	/*hm_params.blocksize = g_settings.getU16("heightmap_blocksize");
 	hm_params.randmax = g_settings.get("height_randmax");
 	hm_params.randfactor = g_settings.get("height_randfactor");
-	hm_params.base = g_settings.get("height_base");
+	hm_params.base = g_settings.get("height_base");*/
 
 	MapParams map_params;
 	map_params.plants_amount = g_settings.getFloat("plants_amount");

src/utility.cpp

@@ -113,7 +113,7 @@ float PointAttributeList::getInterpolatedFloat(v3s16 p)
 {
 	const u32 near_wanted_count = 5;
 	// Last is nearest, first is farthest
-	core::list<DFloat> near;
+	core::list<DFloat> near_list;
 
 	for(core::list<PointWithAttr>::Iterator
 			i = m_points.begin();
@@ -127,17 +127,17 @@ float PointAttributeList::getInterpolatedFloat(v3s16 p)
 		df.d = d;
 				
 		// If near list is empty, add directly and continue
-		if(near.size() == 0)
+		if(near_list.size() == 0)
 		{
-			near.push_back(df);
+			near_list.push_back(df);
 			continue;
 		}
 		
 		// Get distance of farthest in near list
 		u32 near_d = 100000;
-		if(near.size() > 0)
+		if(near_list.size() > 0)
 		{
-			core::list<DFloat>::Iterator i = near.begin();
+			core::list<DFloat>::Iterator i = near_list.begin();
 			near_d = i->d;
 		}
 		
@@ -145,35 +145,35 @@ float PointAttributeList::getInterpolatedFloat(v3s16 p)
 			If point is closer than the farthest in the near list or
 			there are not yet enough points on the list
 		*/
-		if(d < near_d || near.size() < near_wanted_count)
+		if(d < near_d || near_list.size() < near_wanted_count)
 		{
 			// Find the right place in the near list and put it there
 			
 			// Go from farthest to near in the near list
-			core::list<DFloat>::Iterator i = near.begin();
+			core::list<DFloat>::Iterator i = near_list.begin();
-			for(; i != near.end(); i++)
+			for(; i != near_list.end(); i++)
 			{
 				// Stop when i is at the first nearer node
 				if(i->d < d)
 					break;
 			}
 			// Add df to before i
-			if(i == near.end())
+			if(i == near_list.end())
-				near.push_back(df);
+				near_list.push_back(df);
 			else
-				near.insert_before(i, df);
+				near_list.insert_before(i, df);
 
 			// Keep near list at right size
-			if(near.size() > near_wanted_count)
+			if(near_list.size() > near_wanted_count)
 			{
-				core::list<DFloat>::Iterator j = near.begin();
+				core::list<DFloat>::Iterator j = near_list.begin();
-				near.erase(j);
+				near_list.erase(j);
 			}
 		}
 	}
 	
 	// Return if no values found
-	if(near.size() == 0)
+	if(near_list.size() == 0)
 		return 0.0;
 	
 	/*
@@ -183,8 +183,8 @@ lopuks sit otetaan a/b
 	
 	float a = 0;
 	float b = 0;
-	for(core::list<DFloat>::Iterator i = near.begin();
+	for(core::list<DFloat>::Iterator i = near_list.begin();
-			i != near.end(); i++)
+			i != near_list.end(); i++)
 	{
 		if(i->d == 0)
 			return i->v;
@@ -220,17 +220,17 @@ float PointAttributeList::getInterpolatedFloat(v3s16 p)
 		df.d = d;
 				
 		// If near list is empty, add directly and continue
-		if(near.size() == 0)
+		if(near_list.size() == 0)
 		{
-			near.push_back(df);
+			near_list.push_back(df);
 			continue;
 		}
 		
 		// Get distance of farthest in near list
 		u32 near_d = 100000;
-		if(near.size() > 0)
+		if(near_list.size() > 0)
 		{
-			core::list<DFloat>::Iterator i = near.begin();
+			core::list<DFloat>::Iterator i = near_list.begin();
 			near_d = i->d;
 		}
 		
@@ -238,35 +238,35 @@ float PointAttributeList::getInterpolatedFloat(v3s16 p)
 			If point is closer than the farthest in the near list or
 			there are not yet enough points on the list
 		*/
-		if(d < near_d || near.size() < near_wanted_count)
+		if(d < near_d || near_list.size() < near_wanted_count)
 		{
 			// Find the right place in the near list and put it there
 			
 			// Go from farthest to near in the near list
-			core::list<DFloat>::Iterator i = near.begin();
+			core::list<DFloat>::Iterator i = near_list.begin();
-			for(; i != near.end(); i++)
+			for(; i != near_list.end(); i++)
 			{
 				// Stop when i is at the first nearer node
 				if(i->d < d)
 					break;
 			}
 			// Add df to before i
-			if(i == near.end())
+			if(i == near_list.end())
-				near.push_back(df);
+				near_list.push_back(df);
 			else
-				near.insert_before(i, df);
+				near_list.insert_before(i, df);
 
 			// Keep near list at right size
-			if(near.size() > near_wanted_count)
+			if(near_list.size() > near_wanted_count)
 			{
-				core::list<DFloat>::Iterator j = near.begin();
+				core::list<DFloat>::Iterator j = near_list.begin();
-				near.erase(j);
+				near_list.erase(j);
 			}
 		}
 	}
 	
 	// Return if no values found
-	if(near.size() == 0)
+	if(near_list.size() == 0)
 		return 0.0;
 	
 	/*
@@ -274,11 +274,11 @@ float PointAttributeList::getInterpolatedFloat(v3s16 p)
 	*/
 
 	u32 nearest_count = nearest_wanted_count;
-	if(nearest_count > near.size())
+	if(nearest_count > near_list.size())
-		nearest_count = near.size();
+		nearest_count = near_list.size();
 	core::list<DFloat> nearest;
 	{
-		core::list<DFloat>::Iterator i = near.getLast();
+		core::list<DFloat>::Iterator i = near_list.getLast();
 		for(u32 j=0; j<nearest_count; j++)
 		{
 			nearest.push_front(*i);