minetest/src/cavegen.cpp

/*
Minetest
Copyright (C) 2010-2013 celeron55, Perttu Ahola <celeron55@gmail.com>

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU Lesser General Public License as published by
the Free Software Foundation; either version 2.1 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/

#include "util/numeric.h"
#include "map.h"
#include "mapgen.h"
#include "mapgen_v5.h"
#include "mapgen_v6.h"
#include "mapgen_v7.h"
#include "cavegen.h"

NoiseParams nparams_caveliquids(0, 1, v3f(150.0, 150.0, 150.0), 776, 3, 0.6, 2.0);


///////////////////////////////////////// Caves V5


CaveV5::CaveV5(Mapgen *mg, PseudoRandom *ps)
{
	this->mg             = mg;
	this->vm             = mg->vm;
	this->ndef           = mg->ndef;
	this->water_level    = mg->water_level;
	this->ps             = ps;
	c_water_source       = ndef->getId("mapgen_water_source");
	c_lava_source        = ndef->getId("mapgen_lava_source");
	c_ice                = ndef->getId("mapgen_ice");
	this->np_caveliquids = &nparams_caveliquids;
	this->ystride        = mg->csize.X;
 
	if (c_ice == CONTENT_IGNORE)
		c_ice = CONTENT_AIR;

	dswitchint = ps->range(1, 14);
	flooded    = ps->range(1, 2) == 2;

	part_max_length_rs  = ps->range(2, 4);
	tunnel_routepoints  = ps->range(5, ps->range(15, 30));
	min_tunnel_diameter = 5;
	max_tunnel_diameter = ps->range(7, ps->range(8, 24));

	large_cave_is_flat = (ps->range(0, 1) == 0);
}


void CaveV5::makeCave(v3s16 nmin, v3s16 nmax, int max_stone_height)
{
	node_min = nmin;
	node_max = nmax;
	main_direction = v3f(0, 0, 0);

	// Allowed route area size in nodes
	ar = node_max - node_min + v3s16(1, 1, 1);
	// Area starting point in nodes
	of = node_min;

	// Allow a bit more
	//(this should be more than the maximum radius of the tunnel)
	s16 insure = 10;
	s16 more = MYMAX(MAP_BLOCKSIZE - max_tunnel_diameter / 2 - insure, 1);
	ar += v3s16(1,0,1) * more * 2;
	of -= v3s16(1,0,1) * more;

	route_y_min = 0;
	// Allow half a diameter + 7 over stone surface
	route_y_max = -of.Y + max_stone_y + max_tunnel_diameter / 2 + 7;

	// Limit maximum to area
	route_y_max = rangelim(route_y_max, 0, ar.Y - 1);

	s16 min = 0;
		if (node_min.Y < water_level && node_max.Y > water_level) {
			min = water_level - max_tunnel_diameter/3 - of.Y;
			route_y_max = water_level + max_tunnel_diameter/3 - of.Y;
		}
	route_y_min = ps->range(min, min + max_tunnel_diameter);
	route_y_min = rangelim(route_y_min, 0, route_y_max);

	s16 route_start_y_min = route_y_min;
	s16 route_start_y_max = route_y_max;

	route_start_y_min = rangelim(route_start_y_min, 0, ar.Y - 1);
	route_start_y_max = rangelim(route_start_y_max, route_start_y_min, ar.Y - 1);

	// Randomize starting position
	orp = v3f(
		(float)(ps->next() % ar.X) + 0.5,
		(float)(ps->range(route_start_y_min, route_start_y_max)) + 0.5,
		(float)(ps->next() % ar.Z) + 0.5
	);

	// Add generation notify begin event
	v3s16 abs_pos(of.X + orp.X, of.Y + orp.Y, of.Z + orp.Z);
	GenNotifyType notifytype = GENNOTIFY_LARGECAVE_BEGIN;
	mg->gennotify.addEvent(notifytype, abs_pos);

	// Generate some tunnel starting from orp
	for (u16 j = 0; j < tunnel_routepoints; j++)
		makeTunnel(j % dswitchint == 0);

	// Add generation notify end event
	abs_pos = v3s16(of.X + orp.X, of.Y + orp.Y, of.Z + orp.Z);
	notifytype = GENNOTIFY_LARGECAVE_END;
	mg->gennotify.addEvent(notifytype, abs_pos);
}


void CaveV5::makeTunnel(bool dirswitch)
{
	// Randomize size
	s16 min_d = min_tunnel_diameter;
	s16 max_d = max_tunnel_diameter;
	rs = ps->range(min_d, max_d);
	s16 rs_part_max_length_rs = rs * part_max_length_rs;

	v3s16 maxlen;
	maxlen = v3s16(
		rs_part_max_length_rs,
		rs_part_max_length_rs / 2,
		rs_part_max_length_rs
	);

	v3f vec;
	// Jump downward sometimes
	vec = v3f(
		(float)(ps->next() % maxlen.X) - (float)maxlen.X / 2,
		(float)(ps->next() % maxlen.Y) - (float)maxlen.Y / 2,
		(float)(ps->next() % maxlen.Z) - (float)maxlen.Z / 2
	);

	// Do not make caves that are above ground.
	// It is only necessary to check the startpoint and endpoint.
	v3s16 orpi(orp.X, orp.Y, orp.Z);
	v3s16 veci(vec.X, vec.Y, vec.Z);
	v3s16 p;

	p = orpi + veci + of + rs / 2;
	if (p.Z >= node_min.Z && p.Z <= node_max.Z &&
			p.X >= node_min.X && p.X <= node_max.X) {
		u32 index = (p.Z - node_min.Z) * ystride + (p.X - node_min.X);
		s16 h = mg->heightmap[index];
		if (h < p.Y)
			return;
	} else if (p.Y > water_level) {
		return; // If it's not in our heightmap, use a simple heuristic
	}

	p = orpi + of + rs / 2;
	if (p.Z >= node_min.Z && p.Z <= node_max.Z &&
			p.X >= node_min.X && p.X <= node_max.X) {
		u32 index = (p.Z - node_min.Z) * ystride + (p.X - node_min.X);
		s16 h = mg->heightmap[index];
		if (h < p.Y)
			return;
	} else if (p.Y > water_level) {
		return;
	}

	vec += main_direction;

	v3f rp = orp + vec;
	if (rp.X < 0)
		rp.X = 0;
	else if (rp.X >= ar.X)
		rp.X = ar.X - 1;

	if (rp.Y < route_y_min)
		rp.Y = route_y_min;
	else if (rp.Y >= route_y_max)
		rp.Y = route_y_max - 1;

	if (rp.Z < 0)
		rp.Z = 0;
	else if (rp.Z >= ar.Z)
		rp.Z = ar.Z - 1;

	vec = rp - orp;

	float veclen = vec.getLength();
	if (veclen < 0.05)
		veclen = 1.0;

	// Every second section is rough
	bool randomize_xz = (ps->range(1, 2) == 1);

	// Carve routes
	for (float f = 0; f < 1.0; f += 1.0 / veclen)
		carveRoute(vec, f, randomize_xz);

	orp = rp;
}


void CaveV5::carveRoute(v3f vec, float f, bool randomize_xz) 
{
	MapNode airnode(CONTENT_AIR);
	MapNode waternode(c_water_source);
	MapNode lavanode(c_lava_source);

	v3s16 startp(orp.X, orp.Y, orp.Z);
	startp += of;

	float nval = NoisePerlin3D(np_caveliquids, startp.X,
		startp.Y, startp.Z, mg->seed);
	MapNode liquidnode = (nval < 0.40 && node_max.Y < MGV5_LAVA_DEPTH) ?
		lavanode : waternode;

	v3f fp = orp + vec * f;
	fp.X += 0.1 * ps->range(-10, 10);
	fp.Z += 0.1 * ps->range(-10, 10);
	v3s16 cp(fp.X, fp.Y, fp.Z);

	s16 d0 = -rs/2;
	s16 d1 = d0 + rs;
	if (randomize_xz) {
		d0 += ps->range(-1, 1);
		d1 += ps->range(-1, 1);
	}

	for (s16 z0 = d0; z0 <= d1; z0++) {
		s16 si = rs / 2 - MYMAX(0, abs(z0) - rs / 7 - 1);
		for (s16 x0 = -si - ps->range(0,1); x0 <= si - 1 + ps->range(0,1); x0++) {
			s16 maxabsxz = MYMAX(abs(x0), abs(z0));

			s16 si2 = rs / 2 - MYMAX(0, maxabsxz - rs / 7 - 1);

			for (s16 y0 = -si2; y0 <= si2; y0++) {
				if (large_cave_is_flat) {
					// Make large caves not so tall
					if (rs > 7 && abs(y0) >= rs / 3)
						continue;
				}

				v3s16 p(cp.X + x0, cp.Y + y0, cp.Z + z0);
				p += of;

				if (vm->m_area.contains(p) == false)
					continue;

				u32 i = vm->m_area.index(p);
				content_t c = vm->m_data[i].getContent();
				if (!ndef->get(c).is_ground_content)
					continue;

				int full_ymin = node_min.Y - MAP_BLOCKSIZE;
				int full_ymax = node_max.Y + MAP_BLOCKSIZE;

				if (flooded && full_ymin < water_level &&
						full_ymax > water_level)
					vm->m_data[i] = (p.Y <= water_level) ?
						waternode : airnode;
				else if (flooded && full_ymax < water_level)
					vm->m_data[i] = (p.Y < startp.Y - 4) ?
						liquidnode : airnode;
				else
					vm->m_data[i] = airnode;
			}
		}
	}
}


///////////////////////////////////////// Caves V6


CaveV6::CaveV6(MapgenV6 *mg, PseudoRandom *ps, PseudoRandom *ps2, bool is_large_cave)
{
	this->mg             = mg;
	this->vm             = mg->vm;
	this->ndef           = mg->ndef;
	this->water_level    = mg->water_level;
	this->large_cave     = is_large_cave;
	this->ps             = ps;
	this->ps2            = ps2;
	this->c_water_source = mg->c_water_source;
	this->c_lava_source  = mg->c_lava_source;

	min_tunnel_diameter = 2;
	max_tunnel_diameter = ps->range(2, 6);
	dswitchint          = ps->range(1, 14);
	flooded             = true;

	if (large_cave) {
		part_max_length_rs  = ps->range(2,4);
		tunnel_routepoints  = ps->range(5, ps->range(15,30));
		min_tunnel_diameter = 5;
		max_tunnel_diameter = ps->range(7, ps->range(8,24));
	} else {
		part_max_length_rs = ps->range(2,9);
		tunnel_routepoints = ps->range(10, ps->range(15,30));
	}

	large_cave_is_flat = (ps->range(0,1) == 0);
}


void CaveV6::makeCave(v3s16 nmin, v3s16 nmax, int max_stone_height)
{
	node_min = nmin;
	node_max = nmax;
	max_stone_y = max_stone_height;
	main_direction = v3f(0, 0, 0);

	// Allowed route area size in nodes
	ar = node_max - node_min + v3s16(1, 1, 1);
	// Area starting point in nodes
	of = node_min;

	// Allow a bit more
	//(this should be more than the maximum radius of the tunnel)
	const s16 max_spread_amount = MAP_BLOCKSIZE;
	s16 insure = 10;
	s16 more = MYMAX(max_spread_amount - max_tunnel_diameter / 2 - insure, 1);
	ar += v3s16(1,0,1) * more * 2;
	of -= v3s16(1,0,1) * more;

	route_y_min = 0;
	// Allow half a diameter + 7 over stone surface
	route_y_max = -of.Y + max_stone_y + max_tunnel_diameter / 2 + 7;

	// Limit maximum to area
	route_y_max = rangelim(route_y_max, 0, ar.Y - 1);

	if (large_cave) {
		s16 min = 0;
		if (node_min.Y < water_level && node_max.Y > water_level) {
			min = water_level - max_tunnel_diameter/3 - of.Y;
			route_y_max = water_level + max_tunnel_diameter/3 - of.Y;
		}
		route_y_min = ps->range(min, min + max_tunnel_diameter);
		route_y_min = rangelim(route_y_min, 0, route_y_max);
	}

	s16 route_start_y_min = route_y_min;
	s16 route_start_y_max = route_y_max;

	route_start_y_min = rangelim(route_start_y_min, 0, ar.Y-1);
	route_start_y_max = rangelim(route_start_y_max, route_start_y_min, ar.Y-1);

	// Randomize starting position
	orp = v3f(
		(float)(ps->next() % ar.X) + 0.5,
		(float)(ps->range(route_start_y_min, route_start_y_max)) + 0.5,
		(float)(ps->next() % ar.Z) + 0.5
	);

	// Add generation notify begin event
	v3s16 abs_pos(of.X + orp.X, of.Y + orp.Y, of.Z + orp.Z);
	GenNotifyType notifytype = large_cave ?
		GENNOTIFY_LARGECAVE_BEGIN : GENNOTIFY_CAVE_BEGIN;
	mg->gennotify.addEvent(notifytype, abs_pos);

	// Generate some tunnel starting from orp
	for (u16 j = 0; j < tunnel_routepoints; j++)
		makeTunnel(j % dswitchint == 0);

	// Add generation notify end event
	abs_pos = v3s16(of.X + orp.X, of.Y + orp.Y, of.Z + orp.Z);
	notifytype = large_cave ?
		GENNOTIFY_LARGECAVE_END : GENNOTIFY_CAVE_END;
	mg->gennotify.addEvent(notifytype, abs_pos);
}


void CaveV6::makeTunnel(bool dirswitch)
{
	if (dirswitch && !large_cave) {
		main_direction = v3f(
			((float)(ps->next() % 20) - (float)10) / 10,
			((float)(ps->next() % 20) - (float)10) / 30,
			((float)(ps->next() % 20) - (float)10) / 10
		);
		main_direction *= (float)ps->range(0, 10) / 10;
	}

	// Randomize size
	s16 min_d = min_tunnel_diameter;
	s16 max_d = max_tunnel_diameter;
	rs = ps->range(min_d, max_d);
	s16 rs_part_max_length_rs = rs * part_max_length_rs;

	v3s16 maxlen;
	if (large_cave) {
		maxlen = v3s16(
			rs_part_max_length_rs,
			rs_part_max_length_rs / 2,
			rs_part_max_length_rs
		);
	} else {
		maxlen = v3s16(
			rs_part_max_length_rs,
			ps->range(1, rs_part_max_length_rs),
			rs_part_max_length_rs
		);
	}

	v3f vec(
		(float)(ps->next() % maxlen.X) - (float)maxlen.X / 2,
		(float)(ps->next() % maxlen.Y) - (float)maxlen.Y / 2,
		(float)(ps->next() % maxlen.Z) - (float)maxlen.Z / 2
	);

	// Jump downward sometimes
	if (!large_cave && ps->range(0, 12) == 0) {
		vec = v3f(
			(float)(ps->next() % maxlen.X) - (float)maxlen.X / 2,
			(float)(ps->next() % (maxlen.Y * 2)) - (float)maxlen.Y,
			(float)(ps->next() % maxlen.Z) - (float)maxlen.Z / 2
		);
	}

	// Do not make caves that are entirely above ground, to fix
	// shadow bugs caused by overgenerated large caves.
	// It is only necessary to check the startpoint and endpoint.
	v3s16 orpi(orp.X, orp.Y, orp.Z);
	v3s16 veci(vec.X, vec.Y, vec.Z);
	s16 h1;
	s16 h2;

	v3s16 p1 = orpi + veci + of + rs / 2;
	if (p1.Z >= node_min.Z && p1.Z <= node_max.Z &&
			p1.X >= node_min.X && p1.X <= node_max.X) {
		u32 index1 = (p1.Z - node_min.Z) * mg->ystride +
			(p1.X - node_min.X);
		h1 = mg->heightmap[index1];
	} else {
		h1 = water_level; // If not in heightmap
	}

	v3s16 p2 = orpi + of + rs / 2;
	if (p2.Z >= node_min.Z && p2.Z <= node_max.Z &&
			p2.X >= node_min.X && p2.X <= node_max.X) {
		u32 index2 = (p2.Z - node_min.Z) * mg->ystride +
			(p2.X - node_min.X);
		h2 = mg->heightmap[index2];
	} else {
		h2 = water_level;
	}

	// If startpoint and endpoint are above ground,
	// disable placing of nodes in carveRoute while
	// still running all pseudorandom calls to ensure
	// caves consistent with existing worlds.
	bool tunnel_above_ground = p1.Y > h1 && p2.Y > h2;

	vec += main_direction;

	v3f rp = orp + vec;
	if (rp.X < 0)
		rp.X = 0;
	else if (rp.X >= ar.X)
		rp.X = ar.X - 1;

	if (rp.Y < route_y_min)
		rp.Y = route_y_min;
	else if (rp.Y >= route_y_max)
		rp.Y = route_y_max - 1;

	if (rp.Z < 0)
		rp.Z = 0;
	else if (rp.Z >= ar.Z)
		rp.Z = ar.Z - 1;

	vec = rp - orp;

	float veclen = vec.getLength();
	// As odd as it sounds, veclen is *exactly* 0.0 sometimes, causing a FPE
	if (veclen < 0.05)
		veclen = 1.0;

	// Every second section is rough
	bool randomize_xz = (ps2->range(1, 2) == 1);

	// Carve routes
	for (float f = 0; f < 1.0; f += 1.0 / veclen)
		carveRoute(vec, f, randomize_xz, tunnel_above_ground);

	orp = rp;
}


void CaveV6::carveRoute(v3f vec, float f, bool randomize_xz, bool tunnel_above_ground)
{
	MapNode airnode(CONTENT_AIR);
	MapNode waternode(c_water_source);
	MapNode lavanode(c_lava_source);

	v3s16 startp(orp.X, orp.Y, orp.Z);
	startp += of;

	v3f fp = orp + vec * f;
	fp.X += 0.1 * ps->range(-10, 10);
	fp.Z += 0.1 * ps->range(-10, 10);
	v3s16 cp(fp.X, fp.Y, fp.Z);

	s16 d0 = -rs/2;
	s16 d1 = d0 + rs;
	if (randomize_xz) {
		d0 += ps->range(-1, 1);
		d1 += ps->range(-1, 1);
	}

	for (s16 z0 = d0; z0 <= d1; z0++) {
		s16 si = rs / 2 - MYMAX(0, abs(z0) - rs / 7 - 1);
		for (s16 x0 = -si - ps->range(0,1); x0 <= si - 1 + ps->range(0,1); x0++) {
			if (tunnel_above_ground)
				continue;

			s16 maxabsxz = MYMAX(abs(x0), abs(z0));
			s16 si2 = rs / 2 - MYMAX(0, maxabsxz - rs / 7 - 1);
			for (s16 y0 = -si2; y0 <= si2; y0++) {
				if (large_cave_is_flat) {
					// Make large caves not so tall
					if (rs > 7 && abs(y0) >= rs / 3)
						continue;
				}

				v3s16 p(cp.X + x0, cp.Y + y0, cp.Z + z0);
				p += of;

				if (vm->m_area.contains(p) == false)
					continue;

				u32 i = vm->m_area.index(p);
				content_t c = vm->m_data[i].getContent();
				if (!ndef->get(c).is_ground_content)
					continue;

				if (large_cave) {
					int full_ymin = node_min.Y - MAP_BLOCKSIZE;
					int full_ymax = node_max.Y + MAP_BLOCKSIZE;

					if (flooded && full_ymin < water_level &&
							full_ymax > water_level) {
						vm->m_data[i] = (p.Y <= water_level) ?
							waternode : airnode;
					} else if (flooded && full_ymax < water_level) {
						vm->m_data[i] = (p.Y < startp.Y - 2) ?
							lavanode : airnode;
					} else {
						vm->m_data[i] = airnode;
					}
				} else {
					if (c == CONTENT_IGNORE || c == CONTENT_AIR)
						continue;

					vm->m_data[i] = airnode;
					vm->m_flags[i] |= VMANIP_FLAG_CAVE;
				}
			}
		}
	}
}


///////////////////////////////////////// Caves V7


CaveV7::CaveV7(MapgenV7 *mg, PseudoRandom *ps)
{
	this->mg             = mg;
	this->vm             = mg->vm;
	this->ndef           = mg->ndef;
	this->water_level    = mg->water_level;
	this->ps             = ps;
	this->c_water_source = mg->c_water_source;
	this->c_lava_source  = mg->c_lava_source;
	this->c_ice          = mg->c_ice;
	this->np_caveliquids = &nparams_caveliquids;

	dswitchint = ps->range(1, 14);
	flooded    = ps->range(1, 2) == 2;

	part_max_length_rs  = ps->range(2, 4);
	tunnel_routepoints  = ps->range(5, ps->range(15, 30));
	min_tunnel_diameter = 5;
	max_tunnel_diameter = ps->range(7, ps->range(8, 24));

	large_cave_is_flat = (ps->range(0, 1) == 0);
}


void CaveV7::makeCave(v3s16 nmin, v3s16 nmax, int max_stone_height)
{
	node_min = nmin;
	node_max = nmax;
	max_stone_y = max_stone_height;
	main_direction = v3f(0, 0, 0);

	// Allowed route area size in nodes
	ar = node_max - node_min + v3s16(1, 1, 1);
	// Area starting point in nodes
	of = node_min;

	// Allow a bit more
	//(this should be more than the maximum radius of the tunnel)
	s16 insure = 10;
	s16 more = MYMAX(MAP_BLOCKSIZE - max_tunnel_diameter / 2 - insure, 1);
	ar += v3s16(1,0,1) * more * 2;
	of -= v3s16(1,0,1) * more;

	route_y_min = 0;
	// Allow half a diameter + 7 over stone surface
	route_y_max = -of.Y + max_stone_y + max_tunnel_diameter / 2 + 7;

	// Limit maximum to area
	route_y_max = rangelim(route_y_max, 0, ar.Y - 1);

	s16 min = 0;
	if (node_min.Y < water_level && node_max.Y > water_level) {
		min = water_level - max_tunnel_diameter/3 - of.Y;
		route_y_max = water_level + max_tunnel_diameter/3 - of.Y;
	}
	route_y_min = ps->range(min, min + max_tunnel_diameter);
	route_y_min = rangelim(route_y_min, 0, route_y_max);

	s16 route_start_y_min = route_y_min;
	s16 route_start_y_max = route_y_max;

	route_start_y_min = rangelim(route_start_y_min, 0, ar.Y - 1);
	route_start_y_max = rangelim(route_start_y_max, route_start_y_min, ar.Y - 1);

	// Randomize starting position
	orp = v3f(
		(float)(ps->next() % ar.X) + 0.5,
		(float)(ps->range(route_start_y_min, route_start_y_max)) + 0.5,
		(float)(ps->next() % ar.Z) + 0.5
	);

	// Add generation notify begin event
	v3s16 abs_pos(of.X + orp.X, of.Y + orp.Y, of.Z + orp.Z);
	GenNotifyType notifytype = GENNOTIFY_LARGECAVE_BEGIN;
	mg->gennotify.addEvent(notifytype, abs_pos);

	// Generate some tunnel starting from orp
	for (u16 j = 0; j < tunnel_routepoints; j++)
		makeTunnel(j % dswitchint == 0);

	// Add generation notify end event
	abs_pos = v3s16(of.X + orp.X, of.Y + orp.Y, of.Z + orp.Z);
	notifytype = GENNOTIFY_LARGECAVE_END;
	mg->gennotify.addEvent(notifytype, abs_pos);
}


void CaveV7::makeTunnel(bool dirswitch)
{
	// Randomize size
	s16 min_d = min_tunnel_diameter;
	s16 max_d = max_tunnel_diameter;
	rs = ps->range(min_d, max_d);
	s16 rs_part_max_length_rs = rs * part_max_length_rs;

	v3s16 maxlen;
	maxlen = v3s16(
		rs_part_max_length_rs,
		rs_part_max_length_rs / 2,
		rs_part_max_length_rs
	);

	v3f vec;
	// Jump downward sometimes
	vec = v3f(
		(float)(ps->next() % maxlen.X) - (float)maxlen.X / 2,
		(float)(ps->next() % maxlen.Y) - (float)maxlen.Y / 2,
		(float)(ps->next() % maxlen.Z) - (float)maxlen.Z / 2
	);

	// Do not make caves that are above ground.
	// It is only necessary to check the startpoint and endpoint.
	v3s16 orpi(orp.X, orp.Y, orp.Z);
	v3s16 veci(vec.X, vec.Y, vec.Z);
	v3s16 p;

	p = orpi + veci + of + rs / 2;
	if (p.Z >= node_min.Z && p.Z <= node_max.Z &&
			p.X >= node_min.X && p.X <= node_max.X) {
		u32 index = (p.Z - node_min.Z) * mg->ystride + (p.X - node_min.X);
		s16 h = mg->ridge_heightmap[index];
		if (h < p.Y)
			return;
	} else if (p.Y > water_level) {
		return; // If it's not in our heightmap, use a simple heuristic
	}

	p = orpi + of + rs / 2;
	if (p.Z >= node_min.Z && p.Z <= node_max.Z &&
			p.X >= node_min.X && p.X <= node_max.X) {
		u32 index = (p.Z - node_min.Z) * mg->ystride + (p.X - node_min.X);
		s16 h = mg->ridge_heightmap[index];
		if (h < p.Y)
			return;
	} else if (p.Y > water_level) {
		return;
	}

	vec += main_direction;

	v3f rp = orp + vec;
	if (rp.X < 0)
		rp.X = 0;
	else if (rp.X >= ar.X)
		rp.X = ar.X - 1;

	if (rp.Y < route_y_min)
		rp.Y = route_y_min;
	else if (rp.Y >= route_y_max)
		rp.Y = route_y_max - 1;

	if (rp.Z < 0)
		rp.Z = 0;
	else if (rp.Z >= ar.Z)
		rp.Z = ar.Z - 1;

	vec = rp - orp;

	float veclen = vec.getLength();
	if (veclen < 0.05)
		veclen = 1.0;

	// Every second section is rough
	bool randomize_xz = (ps->range(1, 2) == 1);

	// Carve routes
	for (float f = 0; f < 1.0; f += 1.0 / veclen)
		carveRoute(vec, f, randomize_xz);

	orp = rp;
}


void CaveV7::carveRoute(v3f vec, float f, bool randomize_xz)
{
	MapNode airnode(CONTENT_AIR);
	MapNode waternode(c_water_source);
	MapNode lavanode(c_lava_source);

	v3s16 startp(orp.X, orp.Y, orp.Z);
	startp += of;

	float nval = NoisePerlin3D(np_caveliquids, startp.X,
		startp.Y, startp.Z, mg->seed);
	MapNode liquidnode = (nval < 0.40 && node_max.Y < MGV7_LAVA_DEPTH) ?
		lavanode : waternode;

	v3f fp = orp + vec * f;
	fp.X += 0.1 * ps->range(-10, 10);
	fp.Z += 0.1 * ps->range(-10, 10);
	v3s16 cp(fp.X, fp.Y, fp.Z);

	s16 d0 = -rs/2;
	s16 d1 = d0 + rs;
	if (randomize_xz) {
		d0 += ps->range(-1, 1);
		d1 += ps->range(-1, 1);
	}

	for (s16 z0 = d0; z0 <= d1; z0++) {
		s16 si = rs / 2 - MYMAX(0, abs(z0) - rs / 7 - 1);
		for (s16 x0 = -si - ps->range(0,1); x0 <= si - 1 + ps->range(0,1); x0++) {
			s16 maxabsxz = MYMAX(abs(x0), abs(z0));

			s16 si2 = rs / 2 - MYMAX(0, maxabsxz - rs / 7 - 1);

			for (s16 y0 = -si2; y0 <= si2; y0++) {
				if (large_cave_is_flat) {
					// Make large caves not so tall
					if (rs > 7 && abs(y0) >= rs / 3)
						continue;
				}

				v3s16 p(cp.X + x0, cp.Y + y0, cp.Z + z0);
				p += of;

				if (vm->m_area.contains(p) == false)
					continue;

				u32 i = vm->m_area.index(p);
				content_t c = vm->m_data[i].getContent();
				if (!ndef->get(c).is_ground_content)
					continue;

				int full_ymin = node_min.Y - MAP_BLOCKSIZE;
				int full_ymax = node_max.Y + MAP_BLOCKSIZE;

				if (flooded && full_ymin < water_level &&
						full_ymax > water_level)
					vm->m_data[i] = (p.Y <= water_level) ?
						waternode : airnode;
				else if (flooded && full_ymax < water_level)
					vm->m_data[i] = (p.Y < startp.Y - 4) ?
						liquidnode : airnode;
				else
					vm->m_data[i] = airnode;
			}
		}
	}
}