Leave the hostname == null checks so we can fall back if a hostname is not
found. Also convert message-id to upper case to match Apple Mail (for
privacy).
I wrote this fix to avoid obviously specifying that I am using a mobile device
to reply to an email.
Others want this for ease of filtering messages from their host by Message-ID.
The naturalize tool detected that using "uee" is more consistent with
the current codebase state:
* "uee" in LocalStore is 28.47% probable ("usee" 5.01%)
* "uee" in TextBody is 45.02% probable ("usee" 9.10%)
This builds upon the efforts started 2 commits back where \r\n is used for
all message text and \n is only used when the text is inside an
EolConvertingEditText widget.
The problem:
Configure the account (just an example -- problems can occur in other
configurations as well):
Message Format: HTML
Reply quoting style: Prefix
Quote message when replying: yes
Reply after quoted text: yes
Reply to a message that has a large quantity (20+) of \r\n scattered in
the body of its HTML version (not an unusual scenario).
Add a reply. Save the message as a draft. Go back & open the draft
again. A fatal IndexOutOfBoundsException occurs.
The cause:
When the draft was saved, the X-K9mail-Identity header was computed and
added to the message, then the text of the message was processed with
MimeUtility.fixDraftTextBody, replacing all occurrences of \r\n with \n in
the quoted message before being saved in LocalStore, thus invalidating the
X-K9mail-Identity header.
The fix:
Remove MimeUtility.fixDraftTextBody and implement
MessageCompose$EolConvertingEditText instead. Any message text placed in
an EolConvertingEditText widget is assured to have \n line endings. Any
message text extracted from an EolConvertingEditText widget is assured to
have \r\n line endings. The X-K9mail-Identity header will always be
computed correctly.
Issues thought to be related: 4782, 5010, 5634, 5725
As noted in some of the referenced issues, errors didn't always result in
a fatal exception, but instead with mixed up text.
Ref: commit f9a35aeaee
Don't convert the content-type to lower case in
MimeMessage.getContentType. The content-type may have optional parameters
that are case sensitive (boundary, name).
In removing the lower-case conversion from getContentType, a review was
made for inappropriate case-sensitive comparisons which use data obtained
with getContentType. The only ones found were in isMimeType in both
Message and MimeBodyPart.
Case-sensitive instances of isMimeType were made case-insensitive. Also,
isMimeType was moved from Message to MimeMessage for symmetry with
MimeBodyPart (MimeMessage & MimeBodyPart are similar and contain a good
bit of duplication such as this).
The unit test required fixing now that the case of the boundary text is
preserved.
References:
Commits 2c5186 and dc4002 added the toLowerCase to getContentType in
MimeMessage & MimeBodyPart (Issue 94).
Later, commit 50cd60 removed the toLowerCase addition from MimeBodyPart
(Issue 1289).
Fix the unit test to match.
All line endings in the unit test are now the same.
(Just for consistency. Not a big deal, since such problems are fixed when
the messages are run through EOLConvertingOutputStream.)
The preceding commit resulted in attachments of type message/rfc822 being
sent with 8bit encoding even when the SMTP server did not support
8BITMIME. This commit assures that messages will be converted to 7bit
when necessary.
A new interface CompositeBody was created that extends Body, and classes
Message and Multipart were changed from implementing Body to
CompositeBody. Additional classes BinaryTempFileMessageBody and
LocalAttachmentMessageBody were created (by extending BinaryTempFileBody
and LocalAttachmentBody, respectively), and they too implement
CompositeBody.
A CompositeBody is a Body containing a composite-type that can contain
subparts that may require recursive processing when converting from 8bit
to 7bit. The Part to which a CompositeBody belongs is only permitted to
use 8bit or 7bit encoding for the CompositeBody.
Previously, a Message was created so that it was 7bit clean by default
(even though that meant base64 encoding all attachments, including
messages). Then, if the SMTP server supported 8BITMIME,
Message.setEncoding("8bit") was called so that bodies of type TextBody
would been transmitted using 8bit encoding rather than quoted-printable.
Now, messages are created with 8bit encoding by default. Then, if the
SMTP server does not support 8BITMIME, Message.setUsing7bitTransport is
called to recursively convert the message and its subparts to 7bit. The
method setUsing7bitTransport was added to the interfaces Part and
CompositeBody.
setEncoding no longer iterates over parts in Multipart. That task belongs
to setUsing7bitTransport, which may in turn call setEncoding on the parts.
MimeUtility.getEncodingforType was created as a helper function for
choosing a default encoding that should be used for a given MIME type when
an attachment is added to a message (either while composing or when
retrieving from LocalStore).
setEncoding was implemented in MimeBodyPart to assure that the encoding
set in the Part's headers was the same as set for the Part's Body. (The
method already existed in MimeMessage, which has similarities with
MimeBodyPart.)
MimeMessage.parse(InputStream in, boolean recurse) was implemented so that
the parser could be told to recursively process nested messages read from
the InputStream, thus giving access to all subparts at any level that may
need to be converted from 8bit to 7bit.
Issue 5734 exemplifies the problem: receive a message with an attachment
of type message/rfc822 that doesn't use base64 encoding for the body of
the attached message. K-9 Mail incorrectly stores the attached message
locally with its original headers but using base64 encoding for the body.
A discrepancy thus exists between what the headers say about the encoding
of the body versus the actual encoding used. This is obvious when
attempting to view the attachment (either by using a compatible message
viewer available on the device or by saving the attachment to a file and
viewing the file contents).
The process: When a message with an attached sub-message is received,
Message.parse puts the attachment in a new MimeMessage with the
attachment's body in a BinaryTempFileBody. LocalFolder.saveAttachment
then calls Message.writeTo (which later calls BinaryTempFileBody.writeTo)
to place the entire attachment (headers and body) in a new file that will
become a LocalAttachmentBody. Until now, BinaryTempFileBody.writeTo
could only save the message body using base64 encoding.
This commit implements BinaryTempFileBody.setEncoding and assures that the
body is written out with the same encoding that was found in its headers.
This reverts commit bbdec62e37.
Aside from being the incorrect solution for fixing the problem
described in pull request 211, the patch generates 'Dead code'
warnings inside the if(){} statements on lines 46 and 47.
The correct fix for the problem was already implemented in commit
5678786c97.
Although the logcat in the pull request was generated after the fix,
line numbers in the log indicate that it was based on an outdated
version of MimeUtility.java from before the fix.
Previously, <html>, <head>, & <body> tags were
attached to messages before they were stored locally.
But now that the <head> element also needs to include
a <meta> element (for proper MessageWebView display),
it seems unecesary to store all these tags with each
message.
Now the tags are no longer stored with the messages. Instead,
MessageWebView applies the tags before displaying the message.
This also eliminates the need to upgrade an older
message database where all the old messages would have
otherwise needed to be wrapped with the new tags.
LocalMessage already has a content preview in it; reuse that.
Remove unneeded MimeMessage#getPreview() method now that we don't need
to generate a preview anymore.
* rbayer/IMAPsearch: (21 commits)
More cleanup
Code Cleanup getRemoteSearchFullText -> isRemoteSearchFullText line wraps for preference items
Refactor to allow fetching of extra search results beyond original request. Most code moved out of ImapStore and ImapFolder and into MessagingController.searchRemoteMessagesSynchronous. Should make it easier to add remoteSearch for other server types.
Prevent delete of search results while search results open
remove duplicated code block
Don't hide Crypto when IMAPsearch disabled
Code Style Cleanup: Tabs -> 4 spaces Remove trailing whitespace from blank lines
tabs -> spaces (my bad...)
Fix opening of folders to be Read-Write when necessary, even if they were previously opened Read-Only.
add missing file
Working IMAP search, with passable UI.
UI improvements
Simple help info when enabling Remote Search
Dependency for preferences
Basic IMAP search working
bug encounted when replying to a message such as:
From: "bar, foo" <foobar@example.com>
the field was originally folded on the tab, but the CRLF was already stripped before this error.
