of the last successful periodic mail and computes the next start time
as an offset from that successful finish. The ramifications of this
new method is that changing polling interval on an account does not
force delaying all accounts to poll next in the future by the new
interval. Instead, K-9 Mail now adjusts the next poll time based on
what the next poll time should be based on the last poll finish and
the new interval.
Example 1: In the old way, if the old polling interval was 1 hour, and
the next poll was 50 minutes away (10 minutes have passed), and you
changed the interval to 15 minutes, the poll would happen 15 minutes
from now. In the new way, the next poll will happen only 5 minutes
from now, which is 15 minutes since the last poll.
Example 2: In the old way, if the old polling interval was 1 hour, and
the next poll was 10 minutes away (50 minutes have passed), and you
changed the interval to 30 minutes, the poll would happen 30 minutes
from now. The next poll would then happen actually 80 minutes after
the previous poll completed. In the new way, it'll actually happen
immediately, because the time for the next poll, based on the new
schedule, has already passed.
Similar scenarios happen when a loss of network connectivity
occurs. In the old way, polling would resume using the restoration of
connectivity as the starting point. Each time network connectivity
was lost and restored, the next poll would be further delayed. *If
connectivity was lost and restored frequently, a poll might never
happen!* In the new way, the next poll is rescheduled based on the
time of the last successful poll, so will be rescheduled just like it
was before the loss of connectivity. If the time has already been
passed, the poll will happen immediately.
Provide for setting Sent folder to -NONE- which suppresses actually
saving sent mail in any folder.
Also, eliminate logging which folders are not configured for pushing.
It was just too much logging.
Only reschedule polling and setup pushing when necessary due to
particular setting changes. Makes the K-9 Mail UI much more
responsive to setting changes that do not affect polling and pushing.
The poll schedule is deliberately only rescheduled when the period is
decreased. An increase in period will still allow the next scheduled
check to happen as originally scheduled.
Fixes Issue 1034
Refresh Account from Preferences, so that it'll have a fresh copy of
all information. Failure to do this caused the AccountSettings
Activity to show stale information when invoked repeatedly from the
same prior Activity.
Provides for menu items to quickly change the mode of displayed
folders. Also, reorganizes the menu to have an Advanced sub-menu,
like Accounts page has.
Desparately needs a new icon for the Folders menu item.
physical keyboards, though, and should be modified to only re-setup
pushers. Current implementation causes a wasteful reschedule of
polling.
Also gets the help Toast for the folder up-to-date after the
FolderList/MessageList split.
force-closes and inconsistent data on activity reuse. Also, removing
broken/unused code to preserve activity state across invocations.
across invocations.
Don't show messages that are already deleted on the server when we
first download them.
Also, correct item 1 from my comments on r1355. No longer notify for
mails I sent when I selected not to be notified for mails I sent.
* Add an explicit configuration option for stars
* Replace now-outdated "left handed" widgets config option, now that
select widgets are always on the left.
* since the multi-modality of the message list was now only a "toggle
stars" option, kill that, as it was lots of code and rather redundant
always-available select action. For the moment, this means
that widgets_on_left does nothing at all. based on feedback, I may kill
the preference and multi-mode behaviour entirely in favor of "show stars?"
(and possibly "show stars on left"
Stars, "checkboxes" and color bars updated to actually fit in wide mode.
Fixes Issue 806
Make sure to close opened folders in finally blocks in
MessagingController.
Don't make another connection when deleting or copying a
message. (Nicely speeds up copy and delete, as well.)
Another connection is still created for creating a folder while
copying or deleting (a pretty rare event), and the IMAP IDLE
connections are not re-used for user initiated activity.
Automatically build jar file for external applications.
Create convenience functions in K9RemoteControl so that external
applications do not need to know the details of handling the Intents
and broadcasts.
Send a permission string in the broadcasts so that unauthorized
applications cannot intercept communication to authorized
applications, such as K-9 Mail.
to accept control from other Android applications. Allows for
changing both Account-level and global settings. Account-level
settings can be applied to a single Account or to all Accounts.
The file class file derived from src/com/fsck/k9/K9RemoteControl.java
will be bundled into a JAR file for use by external applications.
This facility will be used for:
Issue 215
Issue 730
Issue 864
Issue 884
global config option rather than a per-account one. (But with a new
implementation.) - As we now have views that show messages across
accounts, this needed to become a global)
MessagingController was calling the MessagingListener twice for
deleted messages. By the time the second call was made, some
Activities already had removed the message holder, so a null holder
was being put on the list.
This change should prevent the double calls, and adds protection
against have the MessageList MessagingListener called with a message
that is no longer in the MessageList.
Also, some logical cleanups.
push technology. This provide a layer of safety in case of
misconfiguration (accidentally setting too many folders to push using
classes), which can bog down the device till it is unusable. On a G1,
25 folders is a very large load. Fixes Issue 871.
Also, move some pending commands to the background to make way for
more important user interface activity.
On each IMAP account, the expunge behavior can be set to expunge
messages in a folder as soon as a move or delete is performed on the
folder ("immediately"), each time the folder is polled, or only when
executed manually.
In the Message List, there is now an Expunge action in the option
menu.
In the Folder List, there is now an Expunge action in the context
menu (long-press on the folder).
For IMAP accounts, it is also possible to disable the copying of deleted messages to the
Trash folder, by setting the Trash folder to -NONE-.
Fixes Issue 536.
Separately, in WebDAV accounts, the user can now choose the
server-side equivalents of the special folders, just like for IMAP.
count, scoped for the Activity, the in-progress operation, the account
on which the operation is in progress, the folder for the operation,
when appropriate, and the progress of the operation, when it applies
to multiple items. For the MessageList, also use the determinate
progress bar to show progress for synchronization of the folder being
displayed.
Fixes Issue 924.
Also, a minor change that might help with Issue 913, by putting the
insertion of the pending command into a background thread.
from SQLite at once. The hope is that this will improve perceived
performance on large folders by starting message display sooner.
In the case of a background sync while we're loading, we _may_ end up
doing more work than necessary, since we implement paging by "date
received"
flag/unflag, mark as read/unread and delete. Also provides explicit
mode changing, and select/deselect all. Move and copy are partially
implemented, but disabled.
Desperately needs a new icon.
The "Sort by..." menu now toggles ascending/descending when the
currently selected sort mode is clicked.
Also, an ineffective change to setting the title in the Message List.
A bit more work is in order on that.
Tested to not break unix logfiles ;)
Comment #7 on issue 819 by jessev: Hide empty CC: lines in Message View
http://code.google.com/p/k9mail/issues/detail?id=819
My intent is to default to showing Subject. Date and From or To (depending on whether you're the sender) with a button/widget/hyperlink/something to fold down and show more detail.
--
You received this message because you are listed in the owner or CC fields of this issue, or because you starred this issue.
You may adjust your issue notification preferences at:
http://code.google.com/hosting/settings
Dec 1 19:15:48 mar-adentro kernel: [ 4291.016228] usb 1-6: reset high speed USB device using ehci_hcd and address 4
Dec 1 19:15:48 mar-adentro kernel: [ 4291.308225] usb 2-5: reset high speed USB device using ehci_hcd and address 2
Dec 1 19:15:48 mar-adentro kernel: [ 4291.552221] usb 3-1: reset full speed USB device using uhci_hcd and address 2
Dec 1 19:15:48 mar-adentro kernel: [ 4292.136224] usb 5-1: reset full speed USB device using uhci_hcd and address 2
Dec 1 19:15:48 mar-adentro kernel: [ 4292.425282] usb 3-1.1: reset full speed USB device using uhci_hcd and address 3
Dec 1 19:15:48 mar-adentro kernel: [ 4292.613282] usb 3-1.2: reset full speed USB device using uhci_hcd and address 4
Dec 1 19:15:48 mar-adentro kernel: [ 4292.780373] Restarting tasks ... done.
Dec 1 19:15:48 mar-adentro kernel: [ 4292.784292] usb 3-1.3: USB disconnect, address 7
Dec 1 19:15:49 mar-adentro kernel: [ 4293.230042] ADDRCONF(NETDEV_UP): eth0: link is not ready
Dec 1 19:15:49 mar-adentro kernel: [ 4293.987736] usb 3-1.3: new full speed USB device using uhci_hcd and address 8
Dec 1 19:15:50 mar-adentro kernel: [ 4294.141687] usb 3-1.3: configuration #1 chosen from 1 choice
Dec 1 19:15:54 mar-adentro pulseaudio[1548]: ratelimit.c: 82 events suppressed
Dec 1 19:16:06 mar-adentro kernel: [ 4310.825436] Registered led device: iwl-phy0::radio
Dec 1 19:16:06 mar-adentro kernel: [ 4310.825459] Registered led device: iwl-phy0::assoc
Dec 1 19:16:06 mar-adentro kernel: [ 4310.825479] Registered led device: iwl-phy0::RX
Dec 1 19:16:06 mar-adentro kernel: [ 4310.825500] Registered led device: iwl-phy0::TX
Dec 1 19:16:06 mar-adentro kernel: [ 4310.879827] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Dec 1 19:16:20 mar-adentro kernel: [ 4324.261675] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Dec 1 19:16:22 mar-adentro kernel: [ 4326.254795] padlock: VIA PadLock not detected.
Dec 1 19:44:22 mar-adentro kernel: [ 6006.712166] usb 2-4: new high speed USB device using ehci_hcd and address 5
Dec 1 19:44:22 mar-adentro kernel: [ 6006.865987] usb 2-4: configuration #1 chosen from 1 choice
Dec 1 19:44:22 mar-adentro kernel: [ 6006.869856] scsi7 : SCSI emulation for USB Mass Storage devices
Dec 1 19:44:27 mar-adentro kernel: [ 6011.871419] scsi 7:0:0:0: Direct-Access HTC Android Phone 0100 PQ: 0 ANSI: 2
Dec 1 19:44:27 mar-adentro kernel: [ 6011.873138] sd 7:0:0:0: Attached scsi generic sg2 type 0
Dec 1 19:44:27 mar-adentro kernel: [ 6011.906600] sd 7:0:0:0: [sdb] Attached SCSI removable disk
Dec 1 19:44:34 mar-adentro kernel: [ 6018.102244] sd 7:0:0:0: [sdb] 3862528 512-byte logical blocks: (1.97 GB/1.84 GiB)
Dec 1 19:44:34 mar-adentro kernel: [ 6018.110282] sdb: sdb1
Dec 1 20:00:57 mar-adentro pulseaudio[1548]: ratelimit.c: 1 events suppressed
Dec 1 20:28:13 mar-adentro pulseaudio[1548]: ratelimit.c: 2 events suppressed
LocalStore.purgeToVisibleLimit only to work on undeleted messages.
Convert LocalStore.clear() to use the new DELETED column.
Make markAllAsRead only work on undeleted messages.
