curl/tests/testcurl.pl

659 lines
16 KiB
Perl
Executable File

#!/usr/bin/env perl
#***************************************************************************
# _ _ ____ _
# Project ___| | | | _ \| |
# / __| | | | |_) | |
# | (__| |_| | _ <| |___
# \___|\___/|_| \_\_____|
#
# Copyright (C) 1998 - 2008, Daniel Stenberg, <daniel@haxx.se>, et al.
#
# This software is licensed as described in the file COPYING, which
# you should have received as part of this distribution. The terms
# are also available at http://curl.haxx.se/docs/copyright.html.
#
# You may opt to use, copy, modify, merge, publish, distribute and/or sell
# copies of the Software, and permit persons to whom the Software is
# furnished to do so, under the terms of the COPYING file.
#
# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
# KIND, either express or implied.
#
# $Id$
###########################################################################
###########################
# What is This Script?
###########################
# testcurl.pl is the master script to use for automatic testing of CVS-curl.
# This is written for the purpose of being run from a crontab job or similar
# at a regular interval. The output is suitable to be mailed to
# curl-autocompile@haxx.se to be dealt with automatically (make sure the
# subject includes the word "autobuild" as the mail gets silently discarded
# otherwise). The most current build status (with a resonable backlog) will
# be published on the curl site, at http://curl.haxx.se/auto/
# USAGE:
# testcurl.pl [options] [curl-daily-name] > output
# Options:
#
# --configure=[options] Configure options
# --crosscompile This is a crosscompile
# --desc=[desc] Description of your test system
# --email=[email] Set email address to report as
# --extvercmd=[command] Command to use for displaying version with cross compiles.
# --mktarball=[command] Command to run after completed test
# --name=[name] Set name to report as
# --nocvsup Don't update from CVS even though it is a CVS tree
# --nobuildconf Don't run buildconf
# --runtestopts=[options] Options to pass to runtests.pl
# --setup=[file name] File name to read setup from (deprecated)
# --target=[your os] Specify your target environment.
#
# if [curl-daily-name] is omitted, a 'curl' CVS directory is assumed.
#
use strict;
use Cwd;
# Turn on warnings (equivalent to -w, which can't be used with /usr/bin/env)
#BEGIN { $^W = 1; }
use vars qw($version $fixed $infixed $CURLDIR $CVS $pwd $build $buildlog
$buildlogname $configurebuild $targetos $confsuffix $binext
$libext);
use vars qw($name $email $desc $confopts $runtestopts $setupfile $mktarball
$extvercmd $nocvsup $nobuildconf $crosscompile $timestamp);
# version of this script
$version='$Revision$';
$fixed=0;
# Determine if we're running from CVS or a canned copy of curl,
# or if we got a specific target option or setup file option.
$CURLDIR="curl";
$CVS=1;
$setupfile = 'setup';
while ($ARGV[0]) {
if ($ARGV[0] =~ /--target=/) {
$targetos = (split(/=/, shift @ARGV))[1];
}
elsif ($ARGV[0] =~ /--setup=/) {
$setupfile = (split(/=/, shift @ARGV))[1];
}
elsif ($ARGV[0] =~ /--extvercmd=/) {
$extvercmd = (split(/=/, shift @ARGV))[1];
}
elsif ($ARGV[0] =~ /--mktarball=/) {
$mktarball = (split(/=/, shift @ARGV))[1];
}
elsif ($ARGV[0] =~ /--name=/) {
$name = (split(/=/, shift @ARGV))[1];
}
elsif ($ARGV[0] =~ /--email=/) {
$email = (split(/=/, shift @ARGV))[1];
}
elsif ($ARGV[0] =~ /--desc=/) {
$desc = (split(/=/, shift @ARGV))[1];
}
elsif ($ARGV[0] =~ /--configure=/) {
$confopts = (split(/=/, shift @ARGV))[1];
}
elsif ($ARGV[0] =~ /--nocvsup/) {
$nocvsup=1;
shift @ARGV;
}
elsif ($ARGV[0] =~ /--nobuildconf/) {
$nobuildconf=1;
shift @ARGV;
}
elsif ($ARGV[0] =~ /--crosscompile/) {
$crosscompile=1;
shift @ARGV;
}
elsif ($ARGV[0] =~ /--runtestopts=/) {
$runtestopts = (split(/=/, shift @ARGV, 2))[1];
}
else {
$CURLDIR=shift @ARGV;
$CVS=0;
}
}
# Do the platform-specific stuff here
$configurebuild = 1;
$confsuffix = '';
$binext = '';
$libext = '.la'; # .la since both libcurl and libcares are made with libtool
if ($^O eq 'MSWin32' || $targetos) {
if (!$targetos) {
# If no target defined on Win32 lets assume vc
$targetos = 'vc';
}
if ($targetos =~ /vc/ || $targetos =~ /borland/) {
$binext = '.exe';
$libext = '.lib';
}
elsif ($targetos =~ /mingw32/) {
$binext = '.exe';
if ($^O eq 'MSWin32') {
$libext = '.a';
}
}
elsif ($targetos =~ /netware/) {
$configurebuild = 0;
$binext = '.nlm';
if ($^O eq 'MSWin32') {
$libext = '.lib';
}
else {
$libext = '.a';
}
}
}
if (($^O eq 'MSWin32') &&
($targetos =~ /vc/ || $targetos =~ /mingw32/ || $targetos =~ /borland/)) {
# Set these things only when building ON Windows and for Win32 platform.
# FOR Windows since we might be cross-compiling on another system. Non-
# Windows builds still default to configure-style builds with no confsuffix.
$configurebuild = 0;
$confsuffix = '-win32';
}
$ENV{LANG}="C";
sub rmtree($) {
my $target = $_[0];
if ($^O eq 'MSWin32') {
foreach (glob($target)) {
s:/:\\:g;
system("rd /s /q $_");
}
} else {
system("rm -rf $target");
}
}
sub grepfile($$) {
my ($target, $fn) = @_;
open(F, $fn) or die;
while (<F>) {
if (/$target/) {
close(F);
return 1;
}
}
close(F);
return 0;
}
sub logit($) {
my $text=$_[0];
if ($text) {
print "testcurl: $text\n";
}
}
sub mydie($){
my $text=$_[0];
logit "$text";
chdir $pwd; # cd back to the original root dir
if ($pwd && $build) {
# we have a build directory name, remove the dir
logit "removing the $build dir";
rmtree "$pwd/$build";
}
if (-r $buildlog) {
# we have a build log output file left, remove it
logit "removing the $buildlogname file";
unlink "$buildlog";
}
logit "ENDING HERE"; # last line logged!
exit 1;
}
if (open(F, "$setupfile")) {
while (<F>) {
if (/(\w+)=(.*)/) {
eval "\$$1=$2;";
}
}
close(F);
$infixed=$fixed;
} else {
$infixed=0; # so that "additional args to configure" works properly first time...
}
if (!$name) {
print "please enter your name\n";
$name = <>;
chomp $name;
$fixed=1;
}
if (!$email) {
print "please enter your contact email address\n";
$email = <>;
chomp $email;
$fixed=2;
}
if (!$desc) {
print "please enter a one line system description\n";
$desc = <>;
chomp $desc;
$fixed=3;
}
if (!$confopts) {
if ($infixed < 4) {
print "please enter your additional arguments to configure\n";
print "examples: --with-ssl --enable-debug --enable-ipv6 --with-krb4\n";
$confopts = <>;
chomp $confopts;
}
}
if ($fixed < 4) {
$fixed=4;
open(F, ">$setupfile") or die;
print F "name='$name'\n";
print F "email='$email'\n";
print F "desc='$desc'\n";
print F "confopts='$confopts'\n";
print F "fixed='$fixed'\n";
close(F);
}
my $str1066os = 'o' x 1066;
# Set timestamp to the UTC this script is running. Its value might
# be changed later in the script to the value present in curlver.h
$timestamp = scalar(gmtime)." UTC";
logit "STARTING HERE"; # first line logged, for scripts to trigger on
logit 'TRANSFER CONTROL ==== 1120 CHAR LINE' . $str1066os . 'LINE_END';
logit "NAME = $name";
logit "EMAIL = $email";
logit "DESC = $desc";
logit "CONFOPTS = $confopts";
logit "CPPFLAGS = ".$ENV{CPPFLAGS};
logit "CFLAGS = ".$ENV{CFLAGS};
logit "LDFLAGS = ".$ENV{LDFLAGS};
logit "CC = ".$ENV{CC};
logit "target = ".$targetos;
logit "version = $version"; # script version
logit "date = $timestamp"; # When the test build starts
$str1066os = undef;
# Make $pwd to become the path without newline. We'll use that in order to cut
# off that path from all possible logs and error messages etc.
$pwd = getcwd();
if (-d $CURLDIR) {
if ($CVS && -d "$CURLDIR/CVS") {
logit "$CURLDIR is verified to be a fine source dir";
# remove the generated sources to force them to be re-generated each
# time we run this test
unlink "$CURLDIR/src/hugehelp.c";
} elsif (!$CVS && -f "$CURLDIR/tests/testcurl.pl") {
logit "$CURLDIR is verified to be a fine daily source dir"
} else {
mydie "$CURLDIR is not a daily source dir or checked out from CVS!"
}
}
$build="build-$$";
$buildlogname="buildlog-$$";
$buildlog="$pwd/$buildlogname";
# remove any previous left-overs
rmtree "build-*";
rmtree "buildlog-*";
# this is to remove old build logs that ended up in the wrong dir
foreach (glob("$CURLDIR/buildlog-*")) { unlink $_; }
# create a dir to build in
mkdir $build, 0777;
if (-d $build) {
logit "build dir $build was created fine";
} else {
mydie "failed to create dir $build";
}
# get in the curl source tree root
chdir $CURLDIR;
# Do the CVS thing, or not...
if ($CVS) {
# this is a temporary fix to make things work again, remove later
logit "remove ares/aclocal.m4";
unlink "ares/aclocal.m4";
logit "update from CVS";
my $cvsstat;
sub cvsup() {
# update quietly to the latest CVS
if($nocvsup) {
logit "Skipping CVS update (--nocvsup)";
return 1;
}
else {
logit "run cvs up";
system("cvs -Q up -dP 2>&1");
}
$cvsstat=$?;
# return !RETURNVALUE so that errors return 0 while goodness
# returns 1
return !$cvsstat;
}
my $att=0;
while (!cvsup()) {
$att++;
logit "failed CVS update attempt number $att.";
if ($att > 20) {
$cvsstat=111;
last; # get out of the loop
}
sleep 5;
}
if ($cvsstat != 0) {
mydie "failed to update from CVS ($cvsstat), exiting";
}
elsif (!$nocvsup) {
# Set timestamp to the UTC the CVS update took place.
$timestamp = scalar(gmtime)." UTC";
}
if($nobuildconf) {
logit "told to not run buildconf";
}
elsif ($configurebuild) {
# remove possible left-overs from the past
unlink "configure";
unlink "autom4te.cache";
# generate the build files
logit "invoke buildconf, but filter off aclocal underquoted definition warnings";
open(F, "./buildconf 2>&1 |") or die;
open(LOG, ">$buildlog") or die;
while (<F>) {
next if /warning: underquoted definition of/;
print;
print LOG;
}
close(F);
close(LOG);
if (grepfile("^buildconf: OK", $buildlog)) {
logit "buildconf was successful";
}
else {
mydie "buildconf was NOT successful";
}
}
else {
logit "buildconf was successful (dummy message)";
}
}
# Set timestamp to the one in curlver.h if this isn't a CVS test build.
if ((-f "include/curl/curlver.h") &&
(open(F, "<include/curl/curlver.h"))) {
while (<F>) {
chomp;
if ($_ =~ /^\#define\s+LIBCURL_TIMESTAMP\s+\"(.+)\".*$/) {
my $stampstring = $1;
if ($stampstring !~ /CVS/) {
$stampstring =~ s/\s+UTC//;
$timestamp = $stampstring." UTC";
}
last;
}
}
close(F);
}
# Show timestamp we are using for this test build.
logit "timestamp = $timestamp";
if ($configurebuild) {
if (-f "configure") {
logit "configure created (at least it exists)";
} else {
mydie "no configure created/found";
}
} else {
logit "configure created (dummy message)"; # dummy message to feign success
}
sub findinpath {
my $c;
my $e;
my $x='';
$x='.exe' if ($^O eq 'MSWin32');
my $s=':';
$s=';' if ($^O eq 'MSWin32');
my $p=$ENV{'PATH'};
my @pa = split($s, $p);
for $c (@_) {
for $e (@pa) {
if( -x "$e/$c$x") {
return $c;
}
}
}
}
my $make = findinpath("gmake", "make", "nmake");
if(!$make) {
mydie "Couldn't find make in the PATH";
}
logit "going with $make as make";
# change to build dir
chdir "$pwd/$build";
if ($configurebuild) {
# run configure script
print `../$CURLDIR/configure $confopts 2>&1`;
if (-f "lib/Makefile") {
logit "configure seems to have finished fine";
} else {
mydie "configure didn't work";
}
} else {
logit "copying files to build dir ...";
if (($^O eq 'MSWin32') && ($targetos !~ /netware/)) {
system("xcopy /s /q ..\\$CURLDIR .");
system("buildconf.bat");
}
elsif ($targetos =~ /netware/) {
system("cp -afr ../$CURLDIR/* .");
system("cp -af ../$CURLDIR/Makefile.dist Makefile");
system("$make -i -C lib -f Makefile.netware prebuild");
system("$make -i -C src -f Makefile.netware prebuild");
}
elsif ($^O eq 'linux') {
system("cp -afr ../$CURLDIR/* .");
system("cp -af ../$CURLDIR/Makefile.dist Makefile");
system("cp -af ../$CURLDIR/include/curl/curlbuild.h.dist ./include/curl/curlbuild.h");
system("$make -i -C lib -f Makefile.$targetos prebuild");
system("$make -i -C src -f Makefile.$targetos prebuild");
}
}
if(-f "./include/curl/curlbuild.h") {
logit "display include/curl/curlbuild.h";
if(open(F, "<./include/curl/curlbuild.h")) {
while(<F>) {
my $ll = $_;
print $ll if(($ll =~ /^ *# *define/) && ($ll !~ /__CURL_CURLBUILD_H/));
}
close(F);
}
}
else {
mydie "no curlbuild.h created/found";
}
logit "display lib/config$confsuffix.h";
open(F, "lib/config$confsuffix.h") or die "lib/config$confsuffix.h: $!";
while (<F>) {
print if /^ *#/;
}
close(F);
if (grepfile("define USE_ARES", "lib/config$confsuffix.h")) {
logit "setup to build ares";
logit "display ares/config$confsuffix.h";
if(open(F, "ares/config$confsuffix.h")) {
while (<F>) {
print if /^ *#/;
}
close(F);
}
logit "build ares";
chdir "ares";
if ($targetos && !$configurebuild) {
logit "$make -f Makefile.$targetos";
open(F, "$make -f Makefile.$targetos 2>&1 |") or die;
}
else {
logit "$make";
open(F, "$make 2>&1 |") or die;
}
while (<F>) {
s/$pwd//g;
print;
}
close(F);
if (-f "libcares$libext") {
logit "ares is now built successfully (libcares$libext)";
} else {
logit "ares build failed (libares$libext)";
}
# cd back to the curl build dir
chdir "$pwd/$build";
}
if ($configurebuild) {
logit "$make -i";
open(F, "$make -i 2>&1 |") or die;
while (<F>) {
s/$pwd//g;
print;
}
close(F);
}
else {
logit "$make -i $targetos";
if ($^O eq 'MSWin32') {
if ($targetos =~ /vc/) {
open(F, "nmake -i $targetos|") or die;
}
else {
open(F, "$make -i $targetos |") or die;
}
}
else {
open(F, "$make -i $targetos 2>&1 |") or die;
}
while (<F>) {
s/$pwd//g;
print;
}
close(F);
}
if (-f "lib/libcurl$libext") {
logit "libcurl was created fine (libcurl$libext)";
}
else {
mydie "libcurl was not created (libcurl$libext)";
}
if (-f "src/curl$binext") {
logit "curl was created fine (curl$binext)";
}
else {
mydie "curl was not created (curl$binext)";
}
if (!$crosscompile || (($extvercmd ne '') && (-x $extvercmd))) {
logit "display curl${binext} --version output";
my $cmd = ($extvercmd ne '' ? $extvercmd.' ' : '')."./src/curl${binext} --version|";
open(F, $cmd);
while(<F>) {
print;
print LOG;
}
close(F);
}
if ($configurebuild && !$crosscompile) {
my $o;
if($runtestopts) {
$o = "TEST_F=\"$runtestopts\" ";
}
logit "$make -k ${o}test-full";
open(F, "$make -k ${o}test-full 2>&1 |") or die;
open(LOG, ">$buildlog") or die;
while (<F>) {
s/$pwd//g;
print;
print LOG;
}
close(F);
close(LOG);
if (grepfile("^TEST", $buildlog)) {
logit "tests were run";
} else {
mydie "test suite failure";
}
if (grepfile("^TESTFAIL:", $buildlog)) {
logit "the tests were not successful";
} else {
logit "the tests were successful!";
}
} else {
# dummy message to feign success
if($crosscompile) {
logit "cross-compiling, can't run tests";
}
print "TESTDONE: 1 tests out of 0 (dummy message)\n";
}
# create a tarball if we got that option.
if (($mktarball ne '') && (-x $mktarball)) {
system($mktarball);
}
# mydie to cleanup
mydie "ending nicely";