1
0
mirror of https://github.com/moparisthebest/curl synced 2024-11-16 14:35:03 -05:00
curl/lib/curl_darwinssl.c
Nick Zitzmann f92779198d darwinssl: fixed freeze involving the multi interface
Previously the curl_multi interface would freeze if darwinssl was
enabled and at least one of the handles tried to connect to a Web site
using HTTPS. Removed the "wouldblock" state darwinssl was using because
I figured out a solution for our "would block but in which direction?"
dilemma.
2012-07-25 23:22:11 +02:00

921 lines
28 KiB
C

/***************************************************************************
* _ _ ____ _
* Project ___| | | | _ \| |
* / __| | | | |_) | |
* | (__| |_| | _ <| |___
* \___|\___/|_| \_\_____|
*
* Copyright (C) 2012, Nick Zitzmann, <nickzman@gmail.com>.
* Copyright (C) 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
*
* This software is licensed as described in the file COPYING, which
* you should have received as part of this distribution. The terms
* are also available at http://curl.haxx.se/docs/copyright.html.
*
* You may opt to use, copy, modify, merge, publish, distribute and/or sell
* copies of the Software, and permit persons to whom the Software is
* furnished to do so, under the terms of the COPYING file.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
***************************************************************************/
/*
* Source file for all iOS and Mac OS X SecureTransport-specific code for the
* TLS/SSL layer. No code but sslgen.c should ever call or use these functions.
*/
#include "setup.h"
#ifdef USE_DARWINSSL
#ifdef HAVE_LIMITS_H
#include <limits.h>
#endif
#ifdef HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif
#include <Security/Security.h>
#include <Security/SecureTransport.h>
#include <CoreFoundation/CoreFoundation.h>
#include <CommonCrypto/CommonDigest.h>
#include "urldata.h"
#include "sendf.h"
#include "inet_pton.h"
#include "connect.h"
#include "select.h"
#include "sslgen.h"
#include "curl_darwinssl.h"
#define _MPRINTF_REPLACE /* use our functions only */
#include <curl/mprintf.h>
#include "curl_memory.h"
/* The last #include file should be: */
#include "memdebug.h"
/* From MacTypes.h (which we can't include because it isn't present in iOS: */
#define ioErr -36
/* The following two functions were ripped from Apple sample code,
* with some modifications: */
static OSStatus SocketRead(SSLConnectionRef connection,
void *data, /* owned by
* caller, data
* RETURNED */
size_t *dataLength) /* IN/OUT */
{
UInt32 bytesToGo = *dataLength;
UInt32 initLen = bytesToGo;
UInt8 *currData = (UInt8 *)data;
/*int sock = *(int *)connection;*/
struct ssl_connect_data *connssl = (struct ssl_connect_data *)connection;
int sock = connssl->ssl_sockfd;
OSStatus rtn = noErr;
UInt32 bytesRead;
int rrtn;
int theErr;
*dataLength = 0;
for(;;) {
bytesRead = 0;
rrtn = read(sock, currData, bytesToGo);
if(rrtn <= 0) {
/* this is guesswork... */
theErr = errno;
if((rrtn == 0) && (theErr == 0)) {
/* try fix for iSync */
rtn = errSSLClosedGraceful;
}
else /* do the switch */
switch(theErr) {
case ENOENT:
/* connection closed */
rtn = errSSLClosedGraceful;
break;
case ECONNRESET:
rtn = errSSLClosedAbort;
break;
case EAGAIN:
rtn = errSSLWouldBlock;
connssl->ssl_direction = false;
break;
default:
rtn = ioErr;
break;
}
break;
}
else {
bytesRead = rrtn;
}
bytesToGo -= bytesRead;
currData += bytesRead;
if(bytesToGo == 0) {
/* filled buffer with incoming data, done */
break;
}
}
*dataLength = initLen - bytesToGo;
return rtn;
}
static OSStatus SocketWrite(SSLConnectionRef connection,
const void *data,
size_t *dataLength) /* IN/OUT */
{
UInt32 bytesSent = 0;
/*int sock = *(int *)connection;*/
struct ssl_connect_data *connssl = (struct ssl_connect_data *)connection;
int sock = connssl->ssl_sockfd;
int length;
UInt32 dataLen = *dataLength;
const UInt8 *dataPtr = (UInt8 *)data;
OSStatus ortn;
int theErr;
*dataLength = 0;
do {
length = write(sock,
(char*)dataPtr + bytesSent,
dataLen - bytesSent);
} while((length > 0) &&
( (bytesSent += length) < dataLen) );
if(length <= 0) {
theErr = errno;
if(theErr == EAGAIN) {
ortn = errSSLWouldBlock;
connssl->ssl_direction = true;
}
else {
ortn = ioErr;
}
}
else {
ortn = noErr;
}
*dataLength = bytesSent;
return ortn;
}
CF_INLINE const char *CipherNameForNumber(SSLCipherSuite cipher) {
switch (cipher) {
case SSL_RSA_WITH_NULL_MD5:
return "SSL_RSA_WITH_NULL_MD5";
break;
case SSL_RSA_WITH_NULL_SHA:
return "SSL_RSA_WITH_NULL_SHA";
break;
case SSL_RSA_EXPORT_WITH_RC4_40_MD5:
return "SSL_RSA_EXPORT_WITH_RC4_40_MD5";
break;
case SSL_RSA_WITH_RC4_128_MD5:
return "SSL_RSA_WITH_RC4_128_MD5";
break;
case SSL_RSA_WITH_RC4_128_SHA:
return "SSL_RSA_WITH_RC4_128_SHA";
break;
case SSL_RSA_EXPORT_WITH_RC2_CBC_40_MD5:
return "SSL_RSA_EXPORT_WITH_RC2_CBC_40_MD5";
break;
case SSL_RSA_WITH_IDEA_CBC_SHA:
return "SSL_RSA_WITH_IDEA_CBC_SHA";
break;
case SSL_RSA_EXPORT_WITH_DES40_CBC_SHA:
return "SSL_RSA_EXPORT_WITH_DES40_CBC_SHA";
break;
case SSL_RSA_WITH_DES_CBC_SHA:
return "SSL_RSA_WITH_DES_CBC_SHA";
break;
case SSL_RSA_WITH_3DES_EDE_CBC_SHA:
return "SSL_RSA_WITH_3DES_EDE_CBC_SHA";
break;
case SSL_DH_DSS_EXPORT_WITH_DES40_CBC_SHA:
return "SSL_DH_DSS_EXPORT_WITH_DES40_CBC_SHA";
break;
case SSL_DH_DSS_WITH_DES_CBC_SHA:
return "SSL_DH_DSS_WITH_DES_CBC_SHA";
break;
case SSL_DH_DSS_WITH_3DES_EDE_CBC_SHA:
return "SSL_DH_DSS_WITH_3DES_EDE_CBC_SHA";
break;
case SSL_DH_RSA_EXPORT_WITH_DES40_CBC_SHA:
return "SSL_DH_RSA_EXPORT_WITH_DES40_CBC_SHA";
break;
case SSL_DH_RSA_WITH_DES_CBC_SHA:
return "SSL_DH_RSA_WITH_DES_CBC_SHA";
break;
case SSL_DH_RSA_WITH_3DES_EDE_CBC_SHA:
return "SSL_DH_RSA_WITH_3DES_EDE_CBC_SHA";
break;
case SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA:
return "SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA";
break;
case SSL_DHE_DSS_WITH_DES_CBC_SHA:
return "SSL_DHE_DSS_WITH_DES_CBC_SHA";
break;
case SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA:
return "SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA";
break;
case SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA:
return "SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA";
break;
case SSL_DHE_RSA_WITH_DES_CBC_SHA:
return "SSL_DHE_RSA_WITH_DES_CBC_SHA";
break;
case SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA:
return "SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA";
break;
case SSL_DH_anon_EXPORT_WITH_RC4_40_MD5:
return "SSL_DH_anon_EXPORT_WITH_RC4_40_MD5";
break;
case SSL_DH_anon_WITH_RC4_128_MD5:
return "SSL_DH_anon_WITH_RC4_128_MD5";
break;
case SSL_DH_anon_EXPORT_WITH_DES40_CBC_SHA:
return "SSL_DH_anon_EXPORT_WITH_DES40_CBC_SHA";
break;
case SSL_DH_anon_WITH_DES_CBC_SHA:
return "SSL_DH_anon_WITH_DES_CBC_SHA";
break;
case SSL_DH_anon_WITH_3DES_EDE_CBC_SHA:
return "SSL_DH_anon_WITH_3DES_EDE_CBC_SHA";
break;
case SSL_FORTEZZA_DMS_WITH_NULL_SHA:
return "SSL_FORTEZZA_DMS_WITH_NULL_SHA";
break;
case SSL_FORTEZZA_DMS_WITH_FORTEZZA_CBC_SHA:
return "SSL_FORTEZZA_DMS_WITH_FORTEZZA_CBC_SHA";
break;
case TLS_RSA_WITH_AES_128_CBC_SHA:
return "TLS_RSA_WITH_AES_128_CBC_SHA";
break;
case TLS_DH_DSS_WITH_AES_128_CBC_SHA:
return "TLS_DH_DSS_WITH_AES_128_CBC_SHA";
break;
case TLS_DH_RSA_WITH_AES_128_CBC_SHA:
return "TLS_DH_RSA_WITH_AES_128_CBC_SHA";
break;
case TLS_DHE_DSS_WITH_AES_128_CBC_SHA:
return "TLS_DHE_DSS_WITH_AES_128_CBC_SHA";
break;
case TLS_DHE_RSA_WITH_AES_128_CBC_SHA:
return "TLS_DHE_RSA_WITH_AES_128_CBC_SHA";
break;
case TLS_DH_anon_WITH_AES_128_CBC_SHA:
return "TLS_DH_anon_WITH_AES_128_CBC_SHA";
break;
case TLS_RSA_WITH_AES_256_CBC_SHA:
return "TLS_RSA_WITH_AES_256_CBC_SHA";
break;
case TLS_DH_DSS_WITH_AES_256_CBC_SHA:
return "TLS_DH_DSS_WITH_AES_256_CBC_SHA";
break;
case TLS_DH_RSA_WITH_AES_256_CBC_SHA:
return "TLS_DH_RSA_WITH_AES_256_CBC_SHA";
break;
case TLS_DHE_DSS_WITH_AES_256_CBC_SHA:
return "TLS_DHE_DSS_WITH_AES_256_CBC_SHA";
break;
case TLS_DHE_RSA_WITH_AES_256_CBC_SHA:
return "TLS_DHE_RSA_WITH_AES_256_CBC_SHA";
break;
case TLS_DH_anon_WITH_AES_256_CBC_SHA:
return "TLS_DH_anon_WITH_AES_256_CBC_SHA";
break;
case TLS_ECDH_ECDSA_WITH_NULL_SHA:
return "TLS_ECDH_ECDSA_WITH_NULL_SHA";
break;
case TLS_ECDH_ECDSA_WITH_RC4_128_SHA:
return "TLS_ECDH_ECDSA_WITH_RC4_128_SHA";
break;
case TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA:
return "TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA";
break;
case TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA:
return "TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA";
break;
case TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA:
return "TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA";
break;
case TLS_ECDHE_ECDSA_WITH_NULL_SHA:
return "TLS_ECDHE_ECDSA_WITH_NULL_SHA";
break;
case TLS_ECDHE_ECDSA_WITH_RC4_128_SHA:
return "TLS_ECDHE_ECDSA_WITH_RC4_128_SHA";
break;
case TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA:
return "TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA";
break;
case TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA:
return "TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA";
break;
case TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA:
return "TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA";
break;
case TLS_ECDH_RSA_WITH_NULL_SHA:
return "TLS_ECDH_RSA_WITH_NULL_SHA";
break;
case TLS_ECDH_RSA_WITH_RC4_128_SHA:
return "TLS_ECDH_RSA_WITH_RC4_128_SHA";
break;
case TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA:
return "TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA";
break;
case TLS_ECDH_RSA_WITH_AES_128_CBC_SHA:
return "TLS_ECDH_RSA_WITH_AES_128_CBC_SHA";
break;
case TLS_ECDH_RSA_WITH_AES_256_CBC_SHA:
return "TLS_ECDH_RSA_WITH_AES_256_CBC_SHA";
break;
case TLS_ECDHE_RSA_WITH_NULL_SHA:
return "TLS_ECDHE_RSA_WITH_NULL_SHA";
break;
case TLS_ECDHE_RSA_WITH_RC4_128_SHA:
return "TLS_ECDHE_RSA_WITH_RC4_128_SHA";
break;
case TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA:
return "TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA";
break;
case TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA:
return "TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA";
break;
case TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA:
return "TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA";
break;
case TLS_ECDH_anon_WITH_NULL_SHA:
return "TLS_ECDH_anon_WITH_NULL_SHA";
break;
case TLS_ECDH_anon_WITH_RC4_128_SHA:
return "TLS_ECDH_anon_WITH_RC4_128_SHA";
break;
case TLS_ECDH_anon_WITH_3DES_EDE_CBC_SHA:
return "TLS_ECDH_anon_WITH_3DES_EDE_CBC_SHA";
break;
case TLS_ECDH_anon_WITH_AES_128_CBC_SHA:
return "TLS_ECDH_anon_WITH_AES_128_CBC_SHA";
break;
case TLS_ECDH_anon_WITH_AES_256_CBC_SHA:
return "TLS_ECDH_anon_WITH_AES_256_CBC_SHA";
break;
case SSL_RSA_WITH_RC2_CBC_MD5:
return "SSL_RSA_WITH_RC2_CBC_MD5";
break;
case SSL_RSA_WITH_IDEA_CBC_MD5:
return "SSL_RSA_WITH_IDEA_CBC_MD5";
break;
case SSL_RSA_WITH_DES_CBC_MD5:
return "SSL_RSA_WITH_DES_CBC_MD5";
break;
case SSL_RSA_WITH_3DES_EDE_CBC_MD5:
return "SSL_RSA_WITH_3DES_EDE_CBC_MD5";
break;
}
return "(NONE)";
}
static CURLcode darwinssl_connect_step1(struct connectdata *conn,
int sockindex)
{
struct SessionHandle *data = conn->data;
curl_socket_t sockfd = conn->sock[sockindex];
struct ssl_connect_data *connssl = &conn->ssl[sockindex];
bool sni = true;
#ifdef ENABLE_IPV6
struct in6_addr addr;
#else
struct in_addr addr;
#endif
/*SSLConnectionRef ssl_connection;*/
OSStatus err = noErr;
if(connssl->ssl_ctx)
(void)SSLDisposeContext(connssl->ssl_ctx);
err = SSLNewContext(false, &(connssl->ssl_ctx));
if(err != noErr) {
failf(data, "SSL: couldn't create a context: OSStatus %d", err);
return CURLE_OUT_OF_MEMORY;
}
/* check to see if we've been told to use an explicit SSL/TLS version */
(void)SSLSetProtocolVersionEnabled(connssl->ssl_ctx, kSSLProtocolAll, false);
switch(data->set.ssl.version) {
default:
case CURL_SSLVERSION_DEFAULT:
(void)SSLSetProtocolVersionEnabled(connssl->ssl_ctx,
kSSLProtocol3,
true);
(void)SSLSetProtocolVersionEnabled(connssl->ssl_ctx,
kTLSProtocol1,
true);
break;
case CURL_SSLVERSION_TLSv1:
(void)SSLSetProtocolVersionEnabled(connssl->ssl_ctx,
kTLSProtocol1,
true);
break;
case CURL_SSLVERSION_SSLv2:
(void)SSLSetProtocolVersionEnabled(connssl->ssl_ctx,
kSSLProtocol2,
true);
break;
case CURL_SSLVERSION_SSLv3:
(void)SSLSetProtocolVersionEnabled(connssl->ssl_ctx,
kSSLProtocol3,
true);
break;
}
/* No need to load certificates here. SecureTransport uses the Keychain
* (which is also part of the Security framework) to evaluate trust. */
/* SSL always tries to verify the peer, this only says whether it should
* fail to connect if the verification fails, or if it should continue
* anyway. In the latter case the result of the verification is checked with
* SSL_get_verify_result() below. */
err = SSLSetEnableCertVerify(connssl->ssl_ctx,
data->set.ssl.verifypeer?true:false);
if(err != noErr) {
failf(data, "SSL: SSLSetEnableCertVerify() failed: OSStatus %d", err);
return CURLE_SSL_CONNECT_ERROR;
}
/* If this is a domain name and not an IP address, then configure SNI: */
if((0 == Curl_inet_pton(AF_INET, conn->host.name, &addr)) &&
#ifdef ENABLE_IPV6
(0 == Curl_inet_pton(AF_INET6, conn->host.name, &addr)) &&
#endif
sni) {
err = SSLSetPeerDomainName(connssl->ssl_ctx, conn->host.name,
strlen(conn->host.name));
if(err != noErr) {
infof(data, "WARNING: SSL: SSLSetPeerDomainName() failed: OSStatus %d",
err);
}
}
err = SSLSetIOFuncs(connssl->ssl_ctx, SocketRead, SocketWrite);
if(err != noErr) {
failf(data, "SSL: SSLSetIOFuncs() failed: OSStatus %d", err);
return CURLE_SSL_CONNECT_ERROR;
}
/* pass the raw socket into the SSL layers */
/* We need to store the FD in a constant memory address, because
* SSLSetConnection() will not copy that address. I've found that
* conn->sock[sockindex] may change on its own. */
connssl->ssl_sockfd = sockfd;
/*ssl_connection = &(connssl->ssl_sockfd);
err = SSLSetConnection(connssl->ssl_ctx, ssl_connection);*/
err = SSLSetConnection(connssl->ssl_ctx, connssl);
if(err != noErr) {
failf(data, "SSL: SSLSetConnection() failed: %d", err);
return CURLE_SSL_CONNECT_ERROR;
}
connssl->connecting_state = ssl_connect_2;
return CURLE_OK;
}
static CURLcode
darwinssl_connect_step2(struct connectdata *conn, int sockindex)
{
struct SessionHandle *data = conn->data;
struct ssl_connect_data *connssl = &conn->ssl[sockindex];
OSStatus err;
SSLCipherSuite cipher;
DEBUGASSERT(ssl_connect_2 == connssl->connecting_state
|| ssl_connect_2_reading == connssl->connecting_state
|| ssl_connect_2_writing == connssl->connecting_state);
/* Here goes nothing: */
err = SSLHandshake(connssl->ssl_ctx);
if(err != noErr) {
switch (err) {
case errSSLWouldBlock: /* they're not done with us yet */
connssl->connecting_state = connssl->ssl_direction ?
ssl_connect_2_writing : ssl_connect_2_reading;
return CURLE_OK;
break;
case errSSLServerAuthCompleted:
/* the documentation says we need to call SSLHandshake() again */
return darwinssl_connect_step2(conn, sockindex);
case errSSLXCertChainInvalid:
case errSSLUnknownRootCert:
case errSSLNoRootCert:
case errSSLCertExpired:
failf(data, "SSL certificate problem: OSStatus %d", err);
return CURLE_SSL_CACERT;
break;
default:
failf(data, "Unknown SSL protocol error in connection to %s:%d",
conn->host.name, err);
return CURLE_SSL_CONNECT_ERROR;
break;
}
}
else {
/* we have been connected fine, we're not waiting for anything else. */
connssl->connecting_state = ssl_connect_3;
/* Informational message */
(void)SSLGetNegotiatedCipher(connssl->ssl_ctx, &cipher);
infof (data, "SSL connection using %s\n", CipherNameForNumber(cipher));
return CURLE_OK;
}
}
static CURLcode
darwinssl_connect_step3(struct connectdata *conn,
int sockindex)
{
struct SessionHandle *data = conn->data;
struct ssl_connect_data *connssl = &conn->ssl[sockindex];
CFStringRef server_cert_summary;
char server_cert_summary_c[128];
CFArrayRef server_certs;
SecCertificateRef server_cert;
OSStatus err;
CFIndex i, count;
/* There is no step 3!
* Well, okay, if verbose mode is on, let's print the details of the
* server certificates. */
err = SSLCopyPeerCertificates(connssl->ssl_ctx, &server_certs);
if(err == noErr) {
count = CFArrayGetCount(server_certs);
for(i = 0L ; i < count ; i++) {
server_cert = (SecCertificateRef)CFArrayGetValueAtIndex(server_certs, i);
server_cert_summary = SecCertificateCopySubjectSummary(server_cert);
memset(server_cert_summary_c, 0, 128);
if(CFStringGetCString(server_cert_summary,
server_cert_summary_c,
128,
kCFStringEncodingUTF8)) {
infof(data, "Server certificate: %s\n", server_cert_summary_c);
}
CFRelease(server_cert_summary);
}
CFRelease(server_certs);
}
connssl->connecting_state = ssl_connect_done;
return CURLE_OK;
}
static Curl_recv darwinssl_recv;
static Curl_send darwinssl_send;
static CURLcode
darwinssl_connect_common(struct connectdata *conn,
int sockindex,
bool nonblocking,
bool *done)
{
CURLcode retcode;
struct SessionHandle *data = conn->data;
struct ssl_connect_data *connssl = &conn->ssl[sockindex];
curl_socket_t sockfd = conn->sock[sockindex];
long timeout_ms;
int what;
/* check if the connection has already been established */
if(ssl_connection_complete == connssl->state) {
*done = TRUE;
return CURLE_OK;
}
if(ssl_connect_1==connssl->connecting_state) {
/* Find out how much more time we're allowed */
timeout_ms = Curl_timeleft(data, NULL, TRUE);
if(timeout_ms < 0) {
/* no need to continue if time already is up */
failf(data, "SSL connection timeout");
return CURLE_OPERATION_TIMEDOUT;
}
retcode = darwinssl_connect_step1(conn, sockindex);
if(retcode)
return retcode;
}
while(ssl_connect_2 == connssl->connecting_state ||
ssl_connect_2_reading == connssl->connecting_state ||
ssl_connect_2_writing == connssl->connecting_state) {
/* check allowed time left */
timeout_ms = Curl_timeleft(data, NULL, TRUE);
if(timeout_ms < 0) {
/* no need to continue if time already is up */
failf(data, "SSL connection timeout");
return CURLE_OPERATION_TIMEDOUT;
}
/* if ssl is expecting something, check if it's available. */
if(connssl->connecting_state == ssl_connect_2_reading
|| connssl->connecting_state == ssl_connect_2_writing) {
curl_socket_t writefd = ssl_connect_2_writing ==
connssl->connecting_state?sockfd:CURL_SOCKET_BAD;
curl_socket_t readfd = ssl_connect_2_reading ==
connssl->connecting_state?sockfd:CURL_SOCKET_BAD;
what = Curl_socket_ready(readfd, writefd, nonblocking?0:timeout_ms);
if(what < 0) {
/* fatal error */
failf(data, "select/poll on SSL socket, errno: %d", SOCKERRNO);
return CURLE_SSL_CONNECT_ERROR;
}
else if(0 == what) {
if(nonblocking) {
*done = FALSE;
return CURLE_OK;
}
else {
/* timeout */
failf(data, "SSL connection timeout");
return CURLE_OPERATION_TIMEDOUT;
}
}
/* socket is readable or writable */
}
/* Run transaction, and return to the caller if it failed or if this
* connection is done nonblocking and this loop would execute again. This
* permits the owner of a multi handle to abort a connection attempt
* before step2 has completed while ensuring that a client using select()
* or epoll() will always have a valid fdset to wait on.
*/
retcode = darwinssl_connect_step2(conn, sockindex);
if(retcode || (nonblocking &&
(ssl_connect_2 == connssl->connecting_state ||
ssl_connect_2_reading == connssl->connecting_state ||
ssl_connect_2_writing == connssl->connecting_state)))
return retcode;
} /* repeat step2 until all transactions are done. */
if(ssl_connect_3==connssl->connecting_state) {
retcode = darwinssl_connect_step3(conn, sockindex);
if(retcode)
return retcode;
}
if(ssl_connect_done==connssl->connecting_state) {
connssl->state = ssl_connection_complete;
conn->recv[sockindex] = darwinssl_recv;
conn->send[sockindex] = darwinssl_send;
*done = TRUE;
}
else
*done = FALSE;
/* Reset our connect state machine */
connssl->connecting_state = ssl_connect_1;
return CURLE_OK;
}
CURLcode
Curl_darwinssl_connect_nonblocking(struct connectdata *conn,
int sockindex,
bool *done)
{
return darwinssl_connect_common(conn, sockindex, TRUE, done);
}
CURLcode
Curl_darwinssl_connect(struct connectdata *conn,
int sockindex)
{
CURLcode retcode;
bool done = FALSE;
retcode = darwinssl_connect_common(conn, sockindex, FALSE, &done);
if(retcode)
return retcode;
DEBUGASSERT(done);
return CURLE_OK;
}
void Curl_darwinssl_close(struct connectdata *conn, int sockindex)
{
struct ssl_connect_data *connssl = &conn->ssl[sockindex];
(void)SSLClose(connssl->ssl_ctx);
(void)SSLDisposeContext(connssl->ssl_ctx);
connssl->ssl_ctx = NULL;
connssl->ssl_sockfd = 0;
}
void Curl_darwinssl_close_all(struct SessionHandle *data)
{
/* SecureTransport doesn't separate sessions from contexts, so... */
(void)data;
}
int Curl_darwinssl_shutdown(struct connectdata *conn, int sockindex)
{
struct ssl_connect_data *connssl = &conn->ssl[sockindex];
struct SessionHandle *data = conn->data;
ssize_t nread;
int what;
int rc;
char buf[120];
if(!connssl->ssl_ctx)
return 0;
if(data->set.ftp_ccc != CURLFTPSSL_CCC_ACTIVE)
return 0;
Curl_darwinssl_close(conn, sockindex);
rc = 0;
what = Curl_socket_ready(conn->sock[sockindex],
CURL_SOCKET_BAD, SSL_SHUTDOWN_TIMEOUT);
for(;;) {
if(what < 0) {
/* anything that gets here is fatally bad */
failf(data, "select/poll on SSL socket, errno: %d", SOCKERRNO);
rc = -1;
break;
}
if(!what) { /* timeout */
failf(data, "SSL shutdown timeout");
break;
}
/* Something to read, let's do it and hope that it is the close
notify alert from the server. No way to SSL_Read now, so use read(). */
nread = read(conn->sock[sockindex], buf, sizeof(buf));
if(nread < 0) {
failf(data, "read: %s", strerror(errno));
rc = -1;
}
if(nread <= 0)
break;
what = Curl_socket_ready(conn->sock[sockindex], CURL_SOCKET_BAD, 0);
}
return rc;
}
size_t Curl_darwinssl_version(char *buffer, size_t size)
{
return snprintf(buffer, size, "SecureTransport");
}
/*
* This function uses SSLGetSessionState to determine connection status.
*
* Return codes:
* 1 means the connection is still in place
* 0 means the connection has been closed
* -1 means the connection status is unknown
*/
int Curl_darwinssl_check_cxn(struct connectdata *conn)
{
struct ssl_connect_data *connssl = &conn->ssl[FIRSTSOCKET];
OSStatus err;
SSLSessionState state;
if(connssl->ssl_ctx) {
err = SSLGetSessionState(connssl->ssl_ctx, &state);
if(err == noErr)
return state == kSSLConnected || state == kSSLHandshake;
return -1;
}
return 0;
}
bool Curl_darwinssl_data_pending(const struct connectdata *conn,
int connindex)
{
const struct ssl_connect_data *connssl = &conn->ssl[connindex];
OSStatus err;
size_t buffer;
if(connssl->ssl_ctx) { /* SSL is in use */
err = SSLGetBufferedReadSize(connssl->ssl_ctx, &buffer);
if(err == noErr)
return buffer > 0UL;
return false;
}
else
return false;
}
void Curl_darwinssl_random(struct SessionHandle *data,
unsigned char *entropy,
size_t length)
{
/* arc4random_buf() isn't available on cats older than Lion, so let's
do this manually for the benefit of the older cats. */
size_t i;
u_int32_t random = 0;
for(i = 0 ; i < length ; i++) {
if(i % sizeof(u_int32_t) == 0)
random = arc4random();
entropy[i] = random & 0xFF;
random >>= 8;
}
i = random = 0;
(void)data;
}
void Curl_darwinssl_md5sum(unsigned char *tmp, /* input */
size_t tmplen,
unsigned char *md5sum, /* output */
size_t md5len)
{
(void)md5len;
(void)CC_MD5(tmp, tmplen, md5sum);
}
static ssize_t darwinssl_send(struct connectdata *conn,
int sockindex,
const void *mem,
size_t len,
CURLcode *curlcode)
{
/*struct SessionHandle *data = conn->data;*/
struct ssl_connect_data *connssl = &conn->ssl[sockindex];
size_t processed;
OSStatus err = SSLWrite(connssl->ssl_ctx, mem, len, &processed);
if(err != noErr) {
switch (err) {
case errSSLWouldBlock: /* we're not done yet; keep sending */
*curlcode = CURLE_AGAIN;
return -1;
break;
default:
failf(conn->data, "SSLWrite() return error %d", err);
*curlcode = CURLE_SEND_ERROR;
return -1;
break;
}
}
return (ssize_t)processed;
}
static ssize_t darwinssl_recv(struct connectdata *conn,
int num,
char *buf,
size_t buffersize,
CURLcode *curlcode)
{
/*struct SessionHandle *data = conn->data;*/
struct ssl_connect_data *connssl = &conn->ssl[num];
size_t processed;
OSStatus err = SSLRead(connssl->ssl_ctx, buf, buffersize, &processed);
if(err != noErr) {
switch (err) {
case errSSLWouldBlock: /* we're not done yet; keep reading */
*curlcode = CURLE_AGAIN;
return -1;
break;
default:
failf(conn->data, "SSLRead() return error %d", err);
*curlcode = CURLE_RECV_ERROR;
return -1;
break;
}
}
return (ssize_t)processed;
}
#endif /* USE_DARWINSSL */