moparisthebest/curl
1
0
Fork 0
mirror of https://github.com/moparisthebest/curl synced 2024-11-17 15:05:02 -05:00
Code Issues Releases Wiki Activity
2eabb7d590
curl/lib/smtp.c
Steve Holme 9e8ced9890 imap/smtp: Fixed incorrect SASL mechanism selection with XOAUTH2 servers 
XOAUTH2 would be selected in preference to LOGIN and PLAIN if the IMAP
or SMTP server advertised support for it even though a user's password
was supplied but bearer token wasn't.

Modified the selection logic so that XOAUTH2 will only be selected if
the server supports it and A) The curl user/libcurl programmer has
specifically asked for XOAUTH via the ;AUTH=XOAUTH login option or 2)
The bearer token is specified. Obviously if XOAUTH is asked for via
the login option but no token is specified the user will receive a
authentication failure which makes more sense than no known
authentication mechanisms supported!
2013-09-04 21:27:01 +01:00

1920 lines
54 KiB
C
Raw Blame History

/***************************************************************************
* _ _ ____ _
* Project ___| | | | _ \| |
* / __| | | | |_) | |
* | (__| |_| | _ <| |___
* \___|\___/|_| \_\_____|
*
* Copyright (C) 1998 - 2013, Daniel Stenberg, <daniel@haxx.se>, et al.
*
* This software is licensed as described in the file COPYING, which
* you should have received as part of this distribution. The terms
* are also available at http://curl.haxx.se/docs/copyright.html.
*
* You may opt to use, copy, modify, merge, publish, distribute and/or sell
* copies of the Software, and permit persons to whom the Software is
* furnished to do so, under the terms of the COPYING file.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
* RFC1870 SMTP Service Extension for Message Size
* RFC2195 CRAM-MD5 authentication
* RFC2831 DIGEST-MD5 authentication
* RFC3207 SMTP over TLS
* RFC4422 Simple Authentication and Security Layer (SASL)
* RFC4616 PLAIN authentication
* RFC4954 SMTP Authentication
* RFC5321 SMTP protocol
* RFC6749 OAuth 2.0 Authorization Framework
* Draft SMTP URL Interface
*
***************************************************************************/
#include "curl_setup.h"
#ifndef CURL_DISABLE_SMTP
#ifdef HAVE_NETINET_IN_H
#include <netinet/in.h>
#endif
#ifdef HAVE_ARPA_INET_H
#include <arpa/inet.h>
#endif
#ifdef HAVE_UTSNAME_H
#include <sys/utsname.h>
#endif
#ifdef HAVE_NETDB_H
#include <netdb.h>
#endif
#ifdef __VMS
#include <in.h>
#include <inet.h>
#endif
#if (defined(NETWARE) && defined(__NOVELL_LIBC__))
#undef in_addr_t
#define in_addr_t unsigned long
#endif
#include <curl/curl.h>
#include "urldata.h"
#include "sendf.h"
#include "if2ip.h"
#include "hostip.h"
#include "progress.h"
#include "transfer.h"
#include "escape.h"
#include "http.h" /* for HTTP proxy tunnel stuff */
#include "socks.h"
#include "smtp.h"
#include "strtoofft.h"
#include "strequal.h"
#include "sslgen.h"
#include "connect.h"
#include "strerror.h"
#include "select.h"
#include "multiif.h"
#include "url.h"
#include "rawstr.h"
#include "curl_gethostname.h"
#include "curl_sasl.h"
#include "warnless.h"
#define _MPRINTF_REPLACE /* use our functions only */
#include <curl/mprintf.h>
#include "curl_memory.h"
/* The last #include file should be: */
#include "memdebug.h"
/* Local API functions */
static CURLcode smtp_regular_transfer(struct connectdata *conn, bool *done);
static CURLcode smtp_do(struct connectdata *conn, bool *done);
static CURLcode smtp_done(struct connectdata *conn, CURLcode status,
bool premature);
static CURLcode smtp_connect(struct connectdata *conn, bool *done);
static CURLcode smtp_disconnect(struct connectdata *conn, bool dead);
static CURLcode smtp_multi_statemach(struct connectdata *conn, bool *done);
static int smtp_getsock(struct connectdata *conn, curl_socket_t *socks,
int numsocks);
static CURLcode smtp_doing(struct connectdata *conn, bool *dophase_done);
static CURLcode smtp_setup_connection(struct connectdata *conn);
static CURLcode smtp_parse_url_options(struct connectdata *conn);
static CURLcode smtp_parse_url_path(struct connectdata *conn);
/*
* SMTP protocol handler.
*/
const struct Curl_handler Curl_handler_smtp = {
"SMTP", /* scheme */
smtp_setup_connection, /* setup_connection */
smtp_do, /* do_it */
smtp_done, /* done */
ZERO_NULL, /* do_more */
smtp_connect, /* connect_it */
smtp_multi_statemach, /* connecting */
smtp_doing, /* doing */
smtp_getsock, /* proto_getsock */
smtp_getsock, /* doing_getsock */
ZERO_NULL, /* domore_getsock */
ZERO_NULL, /* perform_getsock */
smtp_disconnect, /* disconnect */
ZERO_NULL, /* readwrite */
PORT_SMTP, /* defport */
CURLPROTO_SMTP, /* protocol */
PROTOPT_CLOSEACTION | PROTOPT_NOURLQUERY /* flags */
};
#ifdef USE_SSL
/*
* SMTPS protocol handler.
*/
const struct Curl_handler Curl_handler_smtps = {
"SMTPS", /* scheme */
smtp_setup_connection, /* setup_connection */
smtp_do, /* do_it */
smtp_done, /* done */
ZERO_NULL, /* do_more */
smtp_connect, /* connect_it */
smtp_multi_statemach, /* connecting */
smtp_doing, /* doing */
smtp_getsock, /* proto_getsock */
smtp_getsock, /* doing_getsock */
ZERO_NULL, /* domore_getsock */
ZERO_NULL, /* perform_getsock */
smtp_disconnect, /* disconnect */
ZERO_NULL, /* readwrite */
PORT_SMTPS, /* defport */
CURLPROTO_SMTP | CURLPROTO_SMTPS, /* protocol */
PROTOPT_CLOSEACTION | PROTOPT_SSL
| PROTOPT_NOURLQUERY /* flags */
};
#endif
#ifndef CURL_DISABLE_HTTP
/*
* HTTP-proxyed SMTP protocol handler.
*/
static const struct Curl_handler Curl_handler_smtp_proxy = {
"SMTP", /* scheme */
Curl_http_setup_conn, /* setup_connection */
Curl_http, /* do_it */
Curl_http_done, /* done */
ZERO_NULL, /* do_more */
ZERO_NULL, /* connect_it */
ZERO_NULL, /* connecting */
ZERO_NULL, /* doing */
ZERO_NULL, /* proto_getsock */
ZERO_NULL, /* doing_getsock */
ZERO_NULL, /* domore_getsock */
ZERO_NULL, /* perform_getsock */
ZERO_NULL, /* disconnect */
ZERO_NULL, /* readwrite */
PORT_SMTP, /* defport */
CURLPROTO_HTTP, /* protocol */
PROTOPT_NONE /* flags */
};
#ifdef USE_SSL
/*
* HTTP-proxyed SMTPS protocol handler.
*/
static const struct Curl_handler Curl_handler_smtps_proxy = {
"SMTPS", /* scheme */
Curl_http_setup_conn, /* setup_connection */
Curl_http, /* do_it */
Curl_http_done, /* done */
ZERO_NULL, /* do_more */
ZERO_NULL, /* connect_it */
ZERO_NULL, /* connecting */
ZERO_NULL, /* doing */
ZERO_NULL, /* proto_getsock */
ZERO_NULL, /* doing_getsock */
ZERO_NULL, /* domore_getsock */
ZERO_NULL, /* perform_getsock */
ZERO_NULL, /* disconnect */
ZERO_NULL, /* readwrite */
PORT_SMTPS, /* defport */
CURLPROTO_HTTP, /* protocol */
PROTOPT_NONE /* flags */
};
#endif
#endif
#ifdef USE_SSL
static void smtp_to_smtps(struct connectdata *conn)
{
conn->handler = &Curl_handler_smtps;
}
#else
#define smtp_to_smtps(x) Curl_nop_stmt
#endif
/***********************************************************************
*
* pop3_endofresp()
*
* Checks for an ending SMTP status code at the start of the given string, but
* also detects various capabilities from the EHLO response including the
* supported authentication mechanisms.
*/
static bool smtp_endofresp(struct connectdata *conn, char *line, size_t len,
int *resp)
{
struct smtp_conn *smtpc = &conn->proto.smtpc;
bool result = FALSE;
size_t wordlen;
if(len < 4 || !ISDIGIT(line[0]) || !ISDIGIT(line[1]) || !ISDIGIT(line[2]))
return FALSE; /* Nothing for us */
/* Do we have a command response? */
result = (line[3] == ' ') ? TRUE : FALSE;
if(result)
*resp = curlx_sltosi(strtol(line, NULL, 10));
/* Are we processing EHLO command data? */
if(smtpc->state == SMTP_EHLO && (!result || (result && *resp/100 == 2))) {
line += 4;
len -= 4;
/* Does the server support the STARTTLS capability? */
if(len >= 8 && !memcmp(line, "STARTTLS", 8))
smtpc->tls_supported = TRUE;
/* Does the server support the SIZE capability? */
else if(len >= 4 && !memcmp(line, "SIZE", 4))
smtpc->size_supported = TRUE;
/* Do we have the authentication mechanism list? */
else if(len >= 5 && !memcmp(line, "AUTH ", 5)) {
line += 5;
len -= 5;
/* Loop through the data line */
for(;;) {
while(len &&
(*line == ' ' || *line == '\t' ||
*line == '\r' || *line == '\n')) {
line++;
len--;
}
if(!len)
break;
/* Extract the word */
for(wordlen = 0; wordlen < len && line[wordlen] != ' ' &&
line[wordlen] != '\t' && line[wordlen] != '\r' &&
line[wordlen] != '\n';)
wordlen++;
/* Test the word for a matching authentication mechanism */
if(wordlen == 5 && !memcmp(line, "LOGIN", 5))
smtpc->authmechs |= SASL_MECH_LOGIN;
else if(wordlen == 5 && !memcmp(line, "PLAIN", 5))
smtpc->authmechs |= SASL_MECH_PLAIN;
else if(wordlen == 8 && !memcmp(line, "CRAM-MD5", 8))
smtpc->authmechs |= SASL_MECH_CRAM_MD5;
else if(wordlen == 10 && !memcmp(line, "DIGEST-MD5", 10))
smtpc->authmechs |= SASL_MECH_DIGEST_MD5;
else if(wordlen == 6 && !memcmp(line, "GSSAPI", 6))
smtpc->authmechs |= SASL_MECH_GSSAPI;
else if(wordlen == 8 && !memcmp(line, "EXTERNAL", 8))
smtpc->authmechs |= SASL_MECH_EXTERNAL;
else if(wordlen == 4 && !memcmp(line, "NTLM", 4))
smtpc->authmechs |= SASL_MECH_NTLM;
else if(wordlen == 7 && !memcmp(line, "XOAUTH2", 7))
smtpc->authmechs |= SASL_MECH_XOAUTH2;
line += wordlen;
len -= wordlen;
}
}
}
return result;
}
/***********************************************************************
*
* state()
*
* This is the ONLY way to change SMTP state!
*/
static void state(struct connectdata *conn, smtpstate newstate)
{
struct smtp_conn *smtpc = &conn->proto.smtpc;
#if defined(DEBUGBUILD) && !defined(CURL_DISABLE_VERBOSE_STRINGS)
/* for debug purposes */
static const char * const names[] = {
"STOP",
"SERVERGREET",
"EHLO",
"HELO",
"STARTTLS",
"UPGRADETLS",
"AUTH_PLAIN",
"AUTH_LOGIN",
"AUTH_LOGIN_PASSWD",
"AUTH_CRAMMD5",
"AUTH_DIGESTMD5",
"AUTH_DIGESTMD5_RESP",
"AUTH_NTLM",
"AUTH_NTLM_TYPE2MSG",
"AUTH_XOAUTH2",
"AUTH_FINAL",
"MAIL",
"RCPT",
"DATA",
"POSTDATA",
"QUIT",
/* LAST */
};
if(smtpc->state != newstate)
infof(conn->data, "SMTP %p state change from %s to %s\n",
(void *)smtpc, names[smtpc->state], names[newstate]);
#endif
smtpc->state = newstate;
}
/***********************************************************************
*
* smtp_perform_ehlo()
*
* Sends the EHLO command to not only initialise communication with the ESMTP
* server but to also obtain a list of server side supported capabilities.
*/
static CURLcode smtp_perform_ehlo(struct connectdata *conn)
{
CURLcode result = CURLE_OK;
struct smtp_conn *smtpc = &conn->proto.smtpc;
smtpc->authmechs = 0; /* No known authentication mechanisms yet */
smtpc->authused = 0; /* Clear the authentication mechanism used
for esmtp connections */
smtpc->tls_supported = FALSE; /* Clear the TLS capability */
/* Send the EHLO command */
result = Curl_pp_sendf(&smtpc->pp, "EHLO %s", smtpc->domain);
if(!result)
state(conn, SMTP_EHLO);
return result;
}
/***********************************************************************
*
* smtp_perform_helo()
*
* Sends the HELO command to initialise communication with the SMTP server.
*/
static CURLcode smtp_perform_helo(struct connectdata *conn)
{
CURLcode result = CURLE_OK;
struct smtp_conn *smtpc = &conn->proto.smtpc;
smtpc->authused = 0; /* No authentication mechanism used in smtp
connections */
/* Send the HELO command */
result = Curl_pp_sendf(&smtpc->pp, "HELO %s", smtpc->domain);
if(!result)
state(conn, SMTP_HELO);
return result;
}
/***********************************************************************
*
* smtp_perform_starttls()
*
* Sends the STLS command to start the upgrade to TLS.
*/
static CURLcode smtp_perform_starttls(struct connectdata *conn)
{
CURLcode result = CURLE_OK;
/* Send the STARTTLS command */
result = Curl_pp_sendf(&conn->proto.smtpc.pp, "%s", "STARTTLS");
if(!result)
state(conn, SMTP_STARTTLS);
return result;
}
/***********************************************************************
*
* smtp_perform_upgrade_tls()
*
* Performs the upgrade to TLS.
*/
static CURLcode smtp_perform_upgrade_tls(struct connectdata *conn)
{
CURLcode result = CURLE_OK;
struct smtp_conn *smtpc = &conn->proto.smtpc;
/* Start the SSL connection */
result = Curl_ssl_connect_nonblocking(conn, FIRSTSOCKET, &smtpc->ssldone);
if(!result) {
if(smtpc->state != SMTP_UPGRADETLS)
state(conn, SMTP_UPGRADETLS);
if(smtpc->ssldone) {
smtp_to_smtps(conn);
result = smtp_perform_ehlo(conn);
}
}
return result;
}
/***********************************************************************
*
* smtp_perform_authenticate()
*
* Sends an AUTH command allowing the client to login with the appropriate
* SASL authentication mechanism.
*/
static CURLcode smtp_perform_authenticate(struct connectdata *conn)
{
CURLcode result = CURLE_OK;
struct SessionHandle *data = conn->data;
struct smtp_conn *smtpc = &conn->proto.smtpc;
const char *mech = NULL;
char *initresp = NULL;
size_t len = 0;
smtpstate state1 = SMTP_STOP;
smtpstate state2 = SMTP_STOP;
/* Check we have a username and password to authenticate with and end the
connect phase if we don't */
if(!conn->bits.user_passwd) {
state(conn, SMTP_STOP);
return result;
}
/* Calculate the supported authentication mechanism, by decreasing order of
security, as well as the initial response where appropriate */
#ifndef CURL_DISABLE_CRYPTO_AUTH
if((smtpc->authmechs & SASL_MECH_DIGEST_MD5) &&
(smtpc->prefmech & SASL_MECH_DIGEST_MD5)) {
mech = "DIGEST-MD5";
state1 = SMTP_AUTH_DIGESTMD5;
smtpc->authused = SASL_MECH_DIGEST_MD5;
}
else if((smtpc->authmechs & SASL_MECH_CRAM_MD5) &&
(smtpc->prefmech & SASL_MECH_CRAM_MD5)) {
mech = "CRAM-MD5";
state1 = SMTP_AUTH_CRAMMD5;
smtpc->authused = SASL_MECH_CRAM_MD5;
}
else
#endif
#ifdef USE_NTLM
if((smtpc->authmechs & SASL_MECH_NTLM) &&
(smtpc->prefmech & SASL_MECH_NTLM)) {
mech = "NTLM";
state1 = SMTP_AUTH_NTLM;
state2 = SMTP_AUTH_NTLM_TYPE2MSG;
smtpc->authused = SASL_MECH_NTLM;
if(data->set.sasl_ir)
result = Curl_sasl_create_ntlm_type1_message(conn->user, conn->passwd,
&conn->ntlm,
&initresp, &len);
}
else
#endif
if((smtpc->authmechs & SASL_MECH_XOAUTH2) &&
(smtpc->prefmech & SASL_MECH_XOAUTH2) &&
(smtpc->prefmech != SASL_AUTH_ANY) || conn->xoauth2_bearer) {
mech = "XOAUTH2";
state1 = SMTP_AUTH_XOAUTH2;
state2 = SMTP_AUTH_FINAL;
smtpc->authused = SASL_MECH_XOAUTH2;
if(data->set.sasl_ir)
result = Curl_sasl_create_xoauth2_message(conn->data, conn->user,
conn->xoauth2_bearer,
&initresp, &len);
}
else if((smtpc->authmechs & SASL_MECH_LOGIN) &&
(smtpc->prefmech & SASL_MECH_LOGIN)) {
mech = "LOGIN";
state1 = SMTP_AUTH_LOGIN;
state2 = SMTP_AUTH_LOGIN_PASSWD;
smtpc->authused = SASL_MECH_LOGIN;
if(data->set.sasl_ir)
result = Curl_sasl_create_login_message(conn->data, conn->user,
&initresp, &len);
}
else if((smtpc->authmechs & SASL_MECH_PLAIN) &&
(smtpc->prefmech & SASL_MECH_PLAIN)) {
mech = "PLAIN";
state1 = SMTP_AUTH_PLAIN;
state2 = SMTP_AUTH_FINAL;
smtpc->authused = SASL_MECH_PLAIN;
if(data->set.sasl_ir)
result = Curl_sasl_create_plain_message(conn->data, conn->user,
conn->passwd, &initresp, &len);
}
if(!result) {
if(mech) {
/* Perform SASL based authentication */
if(initresp &&
8 + strlen(mech) + len <= 512) { /* AUTH <mech> ...<crlf> */
result = Curl_pp_sendf(&smtpc->pp, "AUTH %s %s", mech, initresp);
if(!result)
state(conn, state2);
}
else {
result = Curl_pp_sendf(&smtpc->pp, "AUTH %s", mech);
if(!result)
state(conn, state1);
}
Curl_safefree(initresp);
}
else {
/* Other mechanisms not supported */
infof(conn->data, "No known authentication mechanisms supported!\n");
result = CURLE_LOGIN_DENIED;
}
}
return result;
}
/***********************************************************************
*
* smtp_perform_mail()
*
* Sends an MAIL command to initiate the upload of a message.
*/
static CURLcode smtp_perform_mail(struct connectdata *conn)
{
char *from = NULL;
char *auth = NULL;
char *size = NULL;
CURLcode result = CURLE_OK;
struct SessionHandle *data = conn->data;
/* Calculate the FROM parameter */
if(!data->set.str[STRING_MAIL_FROM])
/* Null reverse-path, RFC-5321, sect. 3.6.3 */
from = strdup("<>");
else if(data->set.str[STRING_MAIL_FROM][0] == '<')
from = aprintf("%s", data->set.str[STRING_MAIL_FROM]);
else
from = aprintf("<%s>", data->set.str[STRING_MAIL_FROM]);
if(!from)
return CURLE_OUT_OF_MEMORY;
/* Calculate the optional AUTH parameter */
if(data->set.str[STRING_MAIL_AUTH] && conn->proto.smtpc.authused) {
if(data->set.str[STRING_MAIL_AUTH][0] != '\0')
auth = aprintf("%s", data->set.str[STRING_MAIL_AUTH]);
else
/* Empty AUTH, RFC-2554, sect. 5 */
auth = strdup("<>");
if(!auth) {
Curl_safefree(from);
return CURLE_OUT_OF_MEMORY;
}
}
/* Calculate the optional SIZE parameter */
if(conn->proto.smtpc.size_supported && conn->data->set.infilesize > 0) {
size = aprintf("%" FORMAT_OFF_T, data->set.infilesize);
if(!size) {
Curl_safefree(from);
Curl_safefree(auth);
return CURLE_OUT_OF_MEMORY;
}
}
/* Send the MAIL command */
if(!auth && !size)
result = Curl_pp_sendf(&conn->proto.smtpc.pp,
"MAIL FROM:%s", from);
else if(auth && !size)
result = Curl_pp_sendf(&conn->proto.smtpc.pp,
"MAIL FROM:%s AUTH=%s", from, auth);
else if(auth && size)
result = Curl_pp_sendf(&conn->proto.smtpc.pp,
"MAIL FROM:%s AUTH=%s SIZE=%s", from, auth, size);
else
result = Curl_pp_sendf(&conn->proto.smtpc.pp,
"MAIL FROM:%s SIZE=%s", from, size);
Curl_safefree(from);
Curl_safefree(auth);
Curl_safefree(size);
if(!result)
state(conn, SMTP_MAIL);
return result;
}
/***********************************************************************
*
* smtp_perform_rcpt_to()
*
* Sends a RCPT TO command for a given recipient as part of the message upload
* process.
*/
static CURLcode smtp_perform_rcpt_to(struct connectdata *conn)
{
CURLcode result = CURLE_OK;
struct SessionHandle *data = conn->data;
struct SMTP *smtp = data->req.protop;
/* Send the RCPT TO command */
if(smtp->rcpt) {
if(smtp->rcpt->data[0] == '<')
result = Curl_pp_sendf(&conn->proto.smtpc.pp, "RCPT TO:%s",
smtp->rcpt->data);
else
result = Curl_pp_sendf(&conn->proto.smtpc.pp, "RCPT TO:<%s>",
smtp->rcpt->data);
if(!result)
state(conn, SMTP_RCPT);
}
return result;
}
/***********************************************************************
*
* smtp_perform_quit()
*
* Performs the quit action prior to sclose() being called.
*/
static CURLcode smtp_perform_quit(struct connectdata *conn)
{
CURLcode result = CURLE_OK;
/* Send the QUIT command */
result = Curl_pp_sendf(&conn->proto.smtpc.pp, "%s", "QUIT");
if(!result)
state(conn, SMTP_QUIT);
return result;
}
/* For the initial server greeting */
static CURLcode smtp_state_servergreet_resp(struct connectdata *conn,
int smtpcode,
smtpstate instate)
{
CURLcode result = CURLE_OK;
struct SessionHandle *data = conn->data;
(void)instate; /* no use for this yet */
if(smtpcode/100 != 2) {
failf(data, "Got unexpected smtp-server response: %d", smtpcode);
result = CURLE_FTP_WEIRD_SERVER_REPLY;
}
else
result = smtp_perform_ehlo(conn);
return result;
}
/* For STARTTLS responses */
static CURLcode smtp_state_starttls_resp(struct connectdata *conn,
int smtpcode,
smtpstate instate)
{
CURLcode result = CURLE_OK;
struct SessionHandle *data = conn->data;
(void)instate; /* no use for this yet */
if(smtpcode != 220) {
if(data->set.use_ssl != CURLUSESSL_TRY) {
failf(data, "STARTTLS denied. %c", smtpcode);
result = CURLE_USE_SSL_FAILED;
}
else
result = smtp_perform_authenticate(conn);
}
else
result = smtp_perform_upgrade_tls(conn);
return result;
}
/* For EHLO responses */
static CURLcode smtp_state_ehlo_resp(struct connectdata *conn, int smtpcode,
smtpstate instate)
{
CURLcode result = CURLE_OK;
struct SessionHandle *data = conn->data;
struct smtp_conn *smtpc = &conn->proto.smtpc;
(void)instate; /* no use for this yet */
if(smtpcode/100 != 2) {
if((data->set.use_ssl <= CURLUSESSL_TRY || conn->ssl[FIRSTSOCKET].use) &&
!conn->bits.user_passwd)
result = smtp_perform_helo(conn);
else {
failf(data, "Remote access denied: %d", smtpcode);
result = CURLE_REMOTE_ACCESS_DENIED;
}
}
else if(data->set.use_ssl && !conn->ssl[FIRSTSOCKET].use) {
/* We don't have a SSL/TLS connection yet, but SSL is requested */
if(smtpc->tls_supported)
/* Switch to TLS connection now */
result = smtp_perform_starttls(conn);
else if(data->set.use_ssl == CURLUSESSL_TRY)
/* Fallback and carry on with authentication */
result = smtp_perform_authenticate(conn);
else {
failf(data, "STARTTLS not supported.");
result = CURLE_USE_SSL_FAILED;
}
}
else
result = smtp_perform_authenticate(conn);
return result;
}
/* For HELO responses */
static CURLcode smtp_state_helo_resp(struct connectdata *conn, int smtpcode,
smtpstate instate)
{
CURLcode result = CURLE_OK;
struct SessionHandle *data = conn->data;
(void)instate; /* no use for this yet */
if(smtpcode/100 != 2) {
failf(data, "Remote access denied: %d", smtpcode);
result = CURLE_REMOTE_ACCESS_DENIED;
}
else
/* End of connect phase */
state(conn, SMTP_STOP);
return result;
}
/* For AUTH PLAIN (without initial response) responses */
static CURLcode smtp_state_auth_plain_resp(struct connectdata *conn,
int smtpcode,
smtpstate instate)
{
CURLcode result = CURLE_OK;
struct SessionHandle *data = conn->data;
size_t len = 0;
char *plainauth = NULL;
(void)instate; /* no use for this yet */
if(smtpcode != 334) {
failf(data, "Access denied: %d", smtpcode);
result = CURLE_LOGIN_DENIED;
}
else {
/* Create the authorisation message */
result = Curl_sasl_create_plain_message(conn->data, conn->user,
conn->passwd, &plainauth, &len);
/* Send the message */
if(!result) {
if(plainauth) {
result = Curl_pp_sendf(&conn->proto.smtpc.pp, "%s", plainauth);
if(!result)
state(conn, SMTP_AUTH_FINAL);
}
Curl_safefree(plainauth);
}
}
return result;
}
/* For AUTH LOGIN (without initial response) responses */
static CURLcode smtp_state_auth_login_resp(struct connectdata *conn,
int smtpcode,
smtpstate instate)
{
CURLcode result = CURLE_OK;
struct SessionHandle *data = conn->data;
size_t len = 0;
char *authuser = NULL;
(void)instate; /* no use for this yet */
if(smtpcode != 334) {
failf(data, "Access denied: %d", smtpcode);
result = CURLE_LOGIN_DENIED;
}
else {
/* Create the user message */
result = Curl_sasl_create_login_message(conn->data, conn->user,
&authuser, &len);
/* Send the user */
if(!result) {
if(authuser) {
result = Curl_pp_sendf(&conn->proto.smtpc.pp, "%s", authuser);
if(!result)
state(conn, SMTP_AUTH_LOGIN_PASSWD);
}
Curl_safefree(authuser);
}
}
return result;
}
/* For AUTH LOGIN user entry responses */
static CURLcode smtp_state_auth_login_password_resp(struct connectdata *conn,
int smtpcode,
smtpstate instate)
{
CURLcode result = CURLE_OK;
struct SessionHandle *data = conn->data;
size_t len = 0;
char *authpasswd = NULL;
(void)instate; /* no use for this yet */
if(smtpcode != 334) {
failf(data, "Access denied: %d", smtpcode);
result = CURLE_LOGIN_DENIED;
}
else {
/* Create the password message */
result = Curl_sasl_create_login_message(conn->data, conn->passwd,
&authpasswd, &len);
/* Send the password */
if(!result) {
if(authpasswd) {
result = Curl_pp_sendf(&conn->proto.smtpc.pp, "%s", authpasswd);
if(!result)
state(conn, SMTP_AUTH_FINAL);
}
Curl_safefree(authpasswd);
}
}
return result;
}
#ifndef CURL_DISABLE_CRYPTO_AUTH
/* For AUTH CRAM-MD5 responses */
static CURLcode smtp_state_auth_cram_resp(struct connectdata *conn,
int smtpcode,
smtpstate instate)
{
CURLcode result = CURLE_OK;
struct SessionHandle *data = conn->data;
char *chlg64 = data->state.buffer;
size_t len = 0;
char *rplyb64 = NULL;
(void)instate; /* no use for this yet */
if(smtpcode != 334) {
failf(data, "Access denied: %d", smtpcode);
return CURLE_LOGIN_DENIED;
}
/* Get the challenge */
for(chlg64 += 4; *chlg64 == ' ' || *chlg64 == '\t'; chlg64++)
;
/* Terminate the challenge */
if(*chlg64 != '=') {
for(len = strlen(chlg64); len--;)
if(chlg64[len] != '\r' && chlg64[len] != '\n' && chlg64[len] != ' ' &&
chlg64[len] != '\t')
break;
if(++len) {
chlg64[len] = '\0';
}
}
/* Create the response message */
result = Curl_sasl_create_cram_md5_message(data, chlg64, conn->user,
conn->passwd, &rplyb64, &len);
/* Send the response */
if(!result) {
if(rplyb64) {
result = Curl_pp_sendf(&conn->proto.smtpc.pp, "%s", rplyb64);
if(!result)
state(conn, SMTP_AUTH_FINAL);
}
Curl_safefree(rplyb64);
}
return result;
}
/* For AUTH DIGEST-MD5 challenge responses */
static CURLcode smtp_state_auth_digest_resp(struct connectdata *conn,
int smtpcode,
smtpstate instate)
{
CURLcode result = CURLE_OK;
struct SessionHandle *data = conn->data;
char *chlg64 = data->state.buffer;
size_t len = 0;
char *rplyb64 = NULL;
(void)instate; /* no use for this yet */
if(smtpcode != 334) {
failf(data, "Access denied: %d", smtpcode);
return CURLE_LOGIN_DENIED;
}
/* Get the challenge */
for(chlg64 += 4; *chlg64 == ' ' || *chlg64 == '\t'; chlg64++)
;
/* Create the response message */
result = Curl_sasl_create_digest_md5_message(data, chlg64, conn->user,
conn->passwd, "smtp",
&rplyb64, &len);
/* Send the response */
if(!result) {
if(rplyb64) {
result = Curl_pp_sendf(&conn->proto.smtpc.pp, "%s", rplyb64);
if(!result)
state(conn, SMTP_AUTH_DIGESTMD5_RESP);
}
Curl_safefree(rplyb64);
}
return result;
}
/* For AUTH DIGEST-MD5 challenge-response responses */
static CURLcode smtp_state_auth_digest_resp_resp(struct connectdata *conn,
int smtpcode,
smtpstate instate)
{
CURLcode result = CURLE_OK;
struct SessionHandle *data = conn->data;
(void)instate; /* no use for this yet */
if(smtpcode != 334) {
failf(data, "Authentication failed: %d", smtpcode);
result = CURLE_LOGIN_DENIED;
}
else {
/* Send an empty response */
result = Curl_pp_sendf(&conn->proto.smtpc.pp, "%s", "");
if(!result)
state(conn, SMTP_AUTH_FINAL);
}
return result;
}
#endif
#ifdef USE_NTLM
/* For AUTH NTLM (without initial response) responses */
static CURLcode smtp_state_auth_ntlm_resp(struct connectdata *conn,
int smtpcode,
smtpstate instate)
{
CURLcode result = CURLE_OK;
struct SessionHandle *data = conn->data;
char *type1msg = NULL;
size_t len = 0;
(void)instate; /* no use for this yet */
if(smtpcode != 334) {
failf(data, "Access denied: %d", smtpcode);
result = CURLE_LOGIN_DENIED;
}
else {
/* Create the type-1 message */
result = Curl_sasl_create_ntlm_type1_message(conn->user, conn->passwd,
&conn->ntlm,
&type1msg, &len);
/* Send the message */
if(!result) {
if(type1msg) {
result = Curl_pp_sendf(&conn->proto.smtpc.pp, "%s", type1msg);
if(!result)
state(conn, SMTP_AUTH_NTLM_TYPE2MSG);
}
Curl_safefree(type1msg);
}
}
return result;
}
/* For NTLM type-2 responses (sent in reponse to our type-1 message) */
static CURLcode smtp_state_auth_ntlm_type2msg_resp(struct connectdata *conn,
int smtpcode,
smtpstate instate)
{
CURLcode result = CURLE_OK;
struct SessionHandle *data = conn->data;
char *type3msg = NULL;
size_t len = 0;
(void)instate; /* no use for this yet */
if(smtpcode != 334) {
failf(data, "Access denied: %d", smtpcode);
result = CURLE_LOGIN_DENIED;
}
else {
/* Create the type-3 message */
result = Curl_sasl_create_ntlm_type3_message(data,
data->state.buffer + 4,
conn->user, conn->passwd,
&conn->ntlm,
&type3msg, &len);
/* Send the message */
if(!result) {
if(type3msg) {
result = Curl_pp_sendf(&conn->proto.smtpc.pp, "%s", type3msg);
if(!result)
state(conn, SMTP_AUTH_FINAL);
}
Curl_safefree(type3msg);
}
}
return result;
}
#endif
/* For AUTH XOAUTH2 (without initial response) responses */
static CURLcode smtp_state_auth_xoauth2_resp(struct connectdata *conn,
int smtpcode, smtpstate instate)
{
CURLcode result = CURLE_OK;
struct SessionHandle *data = conn->data;
size_t len = 0;
char *xoauth = NULL;
(void)instate; /* no use for this yet */
if(smtpcode != 334) {
failf(data, "Access denied: %d", smtpcode);
result = CURLE_LOGIN_DENIED;
}
else {
/* Create the authorisation message */
result = Curl_sasl_create_xoauth2_message(conn->data, conn->user,
conn->xoauth2_bearer,
&xoauth, &len);
/* Send the message */
if(!result) {
if(xoauth) {
result = Curl_pp_sendf(&conn->proto.smtpc.pp, "%s", xoauth);
if(!result)
state(conn, SMTP_AUTH_FINAL);
}
Curl_safefree(xoauth);
}
}
return result;
}
/* For the final responses to the AUTH sequence */
static CURLcode smtp_state_auth_final_resp(struct connectdata *conn,
int smtpcode,
smtpstate instate)
{
CURLcode result = CURLE_OK;
struct SessionHandle *data = conn->data;
(void)instate; /* no use for this yet */
if(smtpcode != 235) {
failf(data, "Authentication failed: %d", smtpcode);
result = CURLE_LOGIN_DENIED;
}
else
/* End of connect phase */
state(conn, SMTP_STOP);
return result;
}
/* For MAIL responses */
static CURLcode smtp_state_mail_resp(struct connectdata *conn, int smtpcode,
smtpstate instate)
{
CURLcode result = CURLE_OK;
struct SessionHandle *data = conn->data;
struct SMTP *smtp = data->req.protop;
(void)instate; /* no use for this yet */
if(smtpcode/100 != 2) {
failf(data, "MAIL failed: %d", smtpcode);
result = CURLE_SEND_ERROR;
state(conn, SMTP_STOP);
}
else {
smtp->rcpt = data->set.mail_rcpt;
result = smtp_perform_rcpt_to(conn);
}
return result;
}
/* For RCPT responses */
static CURLcode smtp_state_rcpt_resp(struct connectdata *conn, int smtpcode,
smtpstate instate)
{
CURLcode result = CURLE_OK;
struct SessionHandle *data = conn->data;
struct SMTP *smtp = data->req.protop;
(void)instate; /* no use for this yet */
if(smtpcode/100 != 2) {
failf(data, "RCPT failed: %d", smtpcode);
result = CURLE_SEND_ERROR;
state(conn, SMTP_STOP);
}
else {
if(smtp->rcpt) {
smtp->rcpt = smtp->rcpt->next;
result = smtp_perform_rcpt_to(conn);
/* If we failed or still are sending RCPT data then return */
if(result || smtp->rcpt)
return result;
}
/* Send the DATA command */
result = Curl_pp_sendf(&conn->proto.smtpc.pp, "%s", "DATA");
if(!result)
state(conn, SMTP_DATA);
}
return result;
}
/* For DATA response */
static CURLcode smtp_state_data_resp(struct connectdata *conn, int smtpcode,
smtpstate instate)
{
struct SessionHandle *data = conn->data;
(void)instate; /* no use for this yet */
if(smtpcode != 354) {
state(conn, SMTP_STOP);
return CURLE_SEND_ERROR;
}
/* Set the progress upload size */
Curl_pgrsSetUploadSize(data, data->set.infilesize);
/* SMTP upload */
Curl_setup_transfer(conn, -1, -1, FALSE, NULL, FIRSTSOCKET, NULL);
/* End of DO phase */
state(conn, SMTP_STOP);
return CURLE_OK;
}
/* For POSTDATA responses, which are received after the entire DATA
part has been sent to the server */
static CURLcode smtp_state_postdata_resp(struct connectdata *conn,
int smtpcode,
smtpstate instate)
{
CURLcode result = CURLE_OK;
(void)instate; /* no use for this yet */
if(smtpcode != 250)
result = CURLE_RECV_ERROR;
/* End of DONE phase */
state(conn, SMTP_STOP);
return result;
}
static CURLcode smtp_statemach_act(struct connectdata *conn)
{
CURLcode result = CURLE_OK;
curl_socket_t sock = conn->sock[FIRSTSOCKET];
struct SessionHandle *data = conn->data;
int smtpcode;
struct smtp_conn *smtpc = &conn->proto.smtpc;
struct pingpong *pp = &smtpc->pp;
size_t nread = 0;
/* Busy upgrading the connection; right now all I/O is SSL/TLS, not SMTP */
if(smtpc->state == SMTP_UPGRADETLS)
return smtp_perform_upgrade_tls(conn);
/* Flush any data that needs to be sent */
if(pp->sendleft)
return Curl_pp_flushsend(pp);
/* Read the response from the server */
result = Curl_pp_readresp(sock, pp, &smtpcode, &nread);
if(result)
return result;
/* Store the latest response for later retrieval */
if(smtpc->state != SMTP_QUIT)
data->info.httpcode = smtpcode;
if(smtpcode) {
/* We have now received a full SMTP server response */
switch(smtpc->state) {
case SMTP_SERVERGREET:
result = smtp_state_servergreet_resp(conn, smtpcode, smtpc->state);
break;
case SMTP_EHLO:
result = smtp_state_ehlo_resp(conn, smtpcode, smtpc->state);
break;
case SMTP_HELO:
result = smtp_state_helo_resp(conn, smtpcode, smtpc->state);
break;
case SMTP_STARTTLS:
result = smtp_state_starttls_resp(conn, smtpcode, smtpc->state);
break;
case SMTP_AUTH_PLAIN:
result = smtp_state_auth_plain_resp(conn, smtpcode, smtpc->state);
break;
case SMTP_AUTH_LOGIN:
result = smtp_state_auth_login_resp(conn, smtpcode, smtpc->state);
break;
case SMTP_AUTH_LOGIN_PASSWD:
result = smtp_state_auth_login_password_resp(conn, smtpcode,
smtpc->state);
break;
#ifndef CURL_DISABLE_CRYPTO_AUTH
case SMTP_AUTH_CRAMMD5:
result = smtp_state_auth_cram_resp(conn, smtpcode, smtpc->state);
break;
case SMTP_AUTH_DIGESTMD5:
result = smtp_state_auth_digest_resp(conn, smtpcode, smtpc->state);
break;
case SMTP_AUTH_DIGESTMD5_RESP:
result = smtp_state_auth_digest_resp_resp(conn, smtpcode, smtpc->state);
break;
#endif
#ifdef USE_NTLM
case SMTP_AUTH_NTLM:
result = smtp_state_auth_ntlm_resp(conn, smtpcode, smtpc->state);
break;
case SMTP_AUTH_NTLM_TYPE2MSG:
result = smtp_state_auth_ntlm_type2msg_resp(conn, smtpcode,
smtpc->state);
break;
#endif
case SMTP_AUTH_XOAUTH2:
result = smtp_state_auth_xoauth2_resp(conn, smtpcode, smtpc->state);
break;
case SMTP_AUTH_FINAL:
result = smtp_state_auth_final_resp(conn, smtpcode, smtpc->state);
break;
case SMTP_MAIL:
result = smtp_state_mail_resp(conn, smtpcode, smtpc->state);
break;
case SMTP_RCPT:
result = smtp_state_rcpt_resp(conn, smtpcode, smtpc->state);
break;
case SMTP_DATA:
result = smtp_state_data_resp(conn, smtpcode, smtpc->state);
break;
case SMTP_POSTDATA:
result = smtp_state_postdata_resp(conn, smtpcode, smtpc->state);
break;
case SMTP_QUIT:
/* fallthrough, just stop! */
default:
/* internal error */
state(conn, SMTP_STOP);
break;
}
}
return result;
}
/* Called repeatedly until done from multi.c */
static CURLcode smtp_multi_statemach(struct connectdata *conn, bool *done)
{
CURLcode result = CURLE_OK;
struct smtp_conn *smtpc = &conn->proto.smtpc;
if((conn->handler->flags & PROTOPT_SSL) && !smtpc->ssldone)
result = Curl_ssl_connect_nonblocking(conn, FIRSTSOCKET, &smtpc->ssldone);
else
result = Curl_pp_statemach(&smtpc->pp, FALSE);
*done = (smtpc->state == SMTP_STOP) ? TRUE : FALSE;
return result;
}
static CURLcode smtp_block_statemach(struct connectdata *conn)
{
CURLcode result = CURLE_OK;
struct smtp_conn *smtpc = &conn->proto.smtpc;
while(smtpc->state != SMTP_STOP && !result)
result = Curl_pp_statemach(&smtpc->pp, TRUE);
return result;
}
/* Allocate and initialize the SMTP struct for the current SessionHandle if
required */
static CURLcode smtp_init(struct connectdata *conn)
{
CURLcode result = CURLE_OK;
struct SessionHandle *data = conn->data;
struct SMTP *smtp;
smtp = data->req.protop = calloc(sizeof(struct SMTP), 1);
if(!smtp)
result = CURLE_OUT_OF_MEMORY;
return result;
}
/* For the SMTP "protocol connect" and "doing" phases only */
static int smtp_getsock(struct connectdata *conn, curl_socket_t *socks,
int numsocks)
{
return Curl_pp_getsock(&conn->proto.smtpc.pp, socks, numsocks);
}
/***********************************************************************
*
* smtp_connect()
*
* This function should do everything that is to be considered a part of
* the connection phase.
*
* The variable pointed to by 'done' will be TRUE if the protocol-layer
* connect phase is done when this function returns, or FALSE if not.
*/
static CURLcode smtp_connect(struct connectdata *conn, bool *done)
{
CURLcode result = CURLE_OK;
struct smtp_conn *smtpc = &conn->proto.smtpc;
struct pingpong *pp = &smtpc->pp;
*done = FALSE; /* default to not done yet */
/* We always support persistent connections in SMTP */
conn->bits.close = FALSE;
/* Set the default response time-out */
pp->response_time = RESP_TIMEOUT;
pp->statemach_act = smtp_statemach_act;
pp->endofresp = smtp_endofresp;
pp->conn = conn;
/* Set the default preferred authentication mechanism */
smtpc->prefmech = SASL_AUTH_ANY;
/* Initialise the pingpong layer */
Curl_pp_init(pp);
/* Parse the URL options */
result = smtp_parse_url_options(conn);
if(result)
return result;
/* Parse the URL path */
result = smtp_parse_url_path(conn);
if(result)
return result;
/* Start off waiting for the server greeting response */
state(conn, SMTP_SERVERGREET);
result = smtp_multi_statemach(conn, done);
return result;
}
/***********************************************************************
*
* smtp_done()
*
* The DONE function. This does what needs to be done after a single DO has
* performed.
*
* Input argument is already checked for validity.
*/
static CURLcode smtp_done(struct connectdata *conn, CURLcode status,
bool premature)
{
CURLcode result = CURLE_OK;
struct SessionHandle *data = conn->data;
struct SMTP *smtp = data->req.protop;
struct pingpong *pp = &conn->proto.smtpc.pp;
const char *eob;
ssize_t len;
ssize_t bytes_written;
(void)premature;
if(!smtp)
/* When the easy handle is removed from the multi interface while libcurl
is still trying to resolve the host name, the SMTP struct is not yet
initialized. However, the removal action calls Curl_done() which in
turn calls this function, so we simply return success. */
return CURLE_OK;
if(status) {
conn->bits.close = TRUE; /* marked for closure */
result = status; /* use the already set error code */
}
else if(!data->set.connect_only) {
/* Calculate the EOB taking into account any terminating CRLF from the
previous line of the email or the CRLF of the DATA command when there
is "no mail data". RFC-5321, sect. 4.1.1.4. */
eob = SMTP_EOB;
len = SMTP_EOB_LEN;
if(smtp->trailing_crlf || !conn->data->set.infilesize) {
eob += 2;
len -= 2;
}
/* Send the end of block data */
result = Curl_write(conn, conn->writesockfd, eob, len, &bytes_written);
if(result)
return result;
if(bytes_written != len) {
/* The whole chunk was not sent so keep it around and adjust the
pingpong structure accordingly */
pp->sendthis = strdup(eob);
pp->sendsize = len;
pp->sendleft = len - bytes_written;
}
else
/* Successfully sent so adjust the response timeout relative to now */
pp->response = Curl_tvnow();
state(conn, SMTP_POSTDATA);
/* Run the state-machine
TODO: when the multi interface is used, this _really_ should be using
the smtp_multi_statemach function but we have no general support for
non-blocking DONE operations, not in the multi state machine and with
Curl_done() invokes on several places in the code!
*/
result = smtp_block_statemach(conn);
}
/* Clear the transfer mode for the next request */
smtp->transfer = FTPTRANSFER_BODY;
return result;
}
/***********************************************************************
*
* smtp_perform()
*
* This is the actual DO function for SMTP. Send a mail according to the
* options previously setup.
*/
static CURLcode smtp_perform(struct connectdata *conn, bool *connected,
bool *dophase_done)
{
/* This is SMTP and no proxy */
CURLcode result = CURLE_OK;
DEBUGF(infof(conn->data, "DO phase starts\n"));
if(conn->data->set.opt_no_body) {
/* Requested no body means no transfer */
struct SMTP *smtp = conn->data->req.protop;
smtp->transfer = FTPTRANSFER_INFO;
}
*dophase_done = FALSE; /* not done yet */
/* Start the first command in the DO phase */
result = smtp_perform_mail(conn);
if(result)
return result;
/* run the state-machine */
result = smtp_multi_statemach(conn, dophase_done);
*connected = conn->bits.tcpconnect[FIRSTSOCKET];
if(*dophase_done)
DEBUGF(infof(conn->data, "DO phase is complete\n"));
return result;
}
/***********************************************************************
*
* smtp_do()
*
* This function is registered as 'curl_do' function. It decodes the path
* parts etc as a wrapper to the actual DO function (smtp_perform).
*
* The input argument is already checked for validity.
*/
static CURLcode smtp_do(struct connectdata *conn, bool *done)
{
CURLcode result = CURLE_OK;
*done = FALSE; /* default to false */
result = smtp_regular_transfer(conn, done);
return result;
}
/***********************************************************************
*
* smtp_disconnect()
*
* Disconnect from an SMTP server. Cleanup protocol-specific per-connection
* resources. BLOCKING.
*/
static CURLcode smtp_disconnect(struct connectdata *conn,
bool dead_connection)
{
struct smtp_conn *smtpc = &conn->proto.smtpc;
/* We cannot send quit unconditionally. If this connection is stale or
bad in any way, sending quit and waiting around here will make the
disconnect wait in vain and cause more problems than we need to. */
/* The SMTP session may or may not have been allocated/setup at this
point! */
if(!dead_connection && smtpc->pp.conn)
if(!smtp_perform_quit(conn))
(void)smtp_block_statemach(conn); /* ignore errors on QUIT */
/* Disconnect from the server */
Curl_pp_disconnect(&smtpc->pp);
/* Cleanup the SASL module */
Curl_sasl_cleanup(conn, smtpc->authused);
/* Cleanup our connection based variables */
Curl_safefree(smtpc->domain);
return CURLE_OK;
}
/* Call this when the DO phase has completed */
static CURLcode smtp_dophase_done(struct connectdata *conn, bool connected)
{
struct SMTP *smtp = conn->data->req.protop;
(void)connected;
if(smtp->transfer != FTPTRANSFER_BODY)
/* no data to transfer */
Curl_setup_transfer(conn, -1, -1, FALSE, NULL, -1, NULL);
return CURLE_OK;
}
/* Called from multi.c while DOing */
static CURLcode smtp_doing(struct connectdata *conn, bool *dophase_done)
{
CURLcode result = smtp_multi_statemach(conn, dophase_done);
if(result)
DEBUGF(infof(conn->data, "DO phase failed\n"));
else if(*dophase_done) {
result = smtp_dophase_done(conn, FALSE /* not connected */);
DEBUGF(infof(conn->data, "DO phase is complete\n"));
}
return result;
}
/***********************************************************************
*
* smtp_regular_transfer()
*
* The input argument is already checked for validity.
*
* Performs all commands done before a regular transfer between a local and a
* remote host.
*/
static CURLcode smtp_regular_transfer(struct connectdata *conn,
bool *dophase_done)
{
CURLcode result = CURLE_OK;
bool connected = FALSE;
struct SessionHandle *data = conn->data;
/* Make sure size is unknown at this point */
data->req.size = -1;
/* Set the progress data */
Curl_pgrsSetUploadCounter(data, 0);
Curl_pgrsSetDownloadCounter(data, 0);
Curl_pgrsSetUploadSize(data, 0);
Curl_pgrsSetDownloadSize(data, 0);
/* Carry out the perform */
result = smtp_perform(conn, &connected, dophase_done);
/* Perform post DO phase operations if necessary */
if(!result && *dophase_done)
result = smtp_dophase_done(conn, connected);
return result;
}
static CURLcode smtp_setup_connection(struct connectdata *conn)
{
struct SessionHandle *data = conn->data;
CURLcode result;
if(conn->bits.httpproxy && !data->set.tunnel_thru_httpproxy) {
/* Unless we have asked to tunnel SMTP operations through the proxy, we
switch and use HTTP operations only */
#ifndef CURL_DISABLE_HTTP
if(conn->handler == &Curl_handler_smtp)
conn->handler = &Curl_handler_smtp_proxy;
else {
#ifdef USE_SSL
conn->handler = &Curl_handler_smtps_proxy;
#else
failf(data, "SMTPS not supported!");
return CURLE_UNSUPPORTED_PROTOCOL;
#endif
}
/* set it up as a HTTP connection instead */
return conn->handler->setup_connection(conn);
#else
failf(data, "SMTP over http proxy requires HTTP support built-in!");
return CURLE_UNSUPPORTED_PROTOCOL;
#endif
}
/* Initialise the SMTP layer */
result = smtp_init(conn);
if(result)
return result;
data->state.path++; /* don't include the initial slash */
return CURLE_OK;
}
/***********************************************************************
*
* smtp_parse_url_options()
*
* Parse the URL login options.
*/
static CURLcode smtp_parse_url_options(struct connectdata *conn)
{
CURLcode result = CURLE_OK;
struct smtp_conn *smtpc = &conn->proto.smtpc;
const char *options = conn->options;
const char *ptr = options;
if(options) {
const char *key = ptr;
while(*ptr && *ptr != '=')
ptr++;
if(strnequal(key, "AUTH", 4)) {
const char *value = ptr + 1;
if(strequal(value, "*"))
smtpc->prefmech = SASL_AUTH_ANY;
else if(strequal(value, "LOGIN"))
smtpc->prefmech = SASL_MECH_LOGIN;
else if(strequal(value, "PLAIN"))
smtpc->prefmech = SASL_MECH_PLAIN;
else if(strequal(value, "CRAM-MD5"))
smtpc->prefmech = SASL_MECH_CRAM_MD5;
else if(strequal(value, "DIGEST-MD5"))
smtpc->prefmech = SASL_MECH_DIGEST_MD5;
else if(strequal(value, "GSSAPI"))
smtpc->prefmech = SASL_MECH_GSSAPI;
else if(strequal(value, "NTLM"))
smtpc->prefmech = SASL_MECH_NTLM;
else if(strequal(value, "XOAUTH2"))
smtpc->prefmech = SASL_MECH_XOAUTH2;
else
smtpc->prefmech = SASL_AUTH_NONE;
}
else
result = CURLE_URL_MALFORMAT;
}
return result;
}
/***********************************************************************
*
* smtp_parse_url_path()
*
* Parse the URL path into separate path components.
*/
static CURLcode smtp_parse_url_path(struct connectdata *conn)
{
/* The SMTP struct is already initialised in smtp_connect() */
struct SessionHandle *data = conn->data;
struct smtp_conn *smtpc = &conn->proto.smtpc;
const char *path = data->state.path;
char localhost[HOSTNAME_MAX + 1];
/* Calculate the path if necessary */
if(!*path) {
if(!Curl_gethostname(localhost, sizeof(localhost)))
path = localhost;
else
path = "localhost";
}
/* URL decode the path and use it as the domain in our EHLO */
return Curl_urldecode(conn->data, path, 0, &smtpc->domain, NULL, TRUE);
}
CURLcode Curl_smtp_escape_eob(struct connectdata *conn, ssize_t nread)
{
/* When sending a SMTP payload we must detect CRLF. sequences making sure
they are sent as CRLF.. instead, as a . on the beginning of a line will
be deleted by the server when not part of an EOB terminator and a
genuine CRLF.CRLF which isn't escaped will wrongly be detected as end of
data by the server
*/
ssize_t i;
ssize_t si;
struct SessionHandle *data = conn->data;
struct SMTP *smtp = data->req.protop;
/* Do we need to allocate the scatch buffer? */
if(!data->state.scratch) {
data->state.scratch = malloc(2 * BUFSIZE);
if(!data->state.scratch) {
failf (data, "Failed to alloc scratch buffer!");
return CURLE_OUT_OF_MEMORY;
}
}
/* This loop can be improved by some kind of Boyer-Moore style of
approach but that is saved for later... */
for(i = 0, si = 0; i < nread; i++) {
if(SMTP_EOB[smtp->eob] == data->req.upload_fromhere[i]) {
smtp->eob++;
/* Is the EOB potentially the terminating CRLF? */
if(2 == smtp->eob || SMTP_EOB_LEN == smtp->eob)
smtp->trailing_crlf = TRUE;
else
smtp->trailing_crlf = FALSE;
}
else if(smtp->eob) {
/* A previous substring matched so output that first */
memcpy(&data->state.scratch[si], SMTP_EOB, smtp->eob);
si += smtp->eob;
/* Then compare the first byte */
if(SMTP_EOB[0] == data->req.upload_fromhere[i])
smtp->eob = 1;
else
smtp->eob = 0;
/* Reset the trailing CRLF flag as there was more data */
smtp->trailing_crlf = FALSE;
}
/* Do we have a match for CRLF. as per RFC-5321, sect. 4.5.2 */
if(SMTP_EOB_FIND_LEN == smtp->eob) {
/* Copy the replacement data to the target buffer */
memcpy(&data->state.scratch[si], SMTP_EOB_REPL, SMTP_EOB_REPL_LEN);
si += SMTP_EOB_REPL_LEN;
smtp->eob = 0;
}
else if(!smtp->eob)
data->state.scratch[si++] = data->req.upload_fromhere[i];
}
if(smtp->eob) {
/* A substring matched before processing ended so output that now */
memcpy(&data->state.scratch[si], SMTP_EOB, smtp->eob);
si += smtp->eob;
smtp->eob = 0;
}
if(si != nread) {
/* Only use the new buffer if we replaced something */
nread = si;
/* Upload from the new (replaced) buffer instead */
data->req.upload_fromhere = data->state.scratch;
/* Set the new amount too */
data->req.upload_present = nread;
}
return CURLE_OK;
}
#endif /* CURL_DISABLE_SMTP */
Reference in New Issue View Git Blame Copy Permalink