moparisthebest/curl
1
0
Fork 0
mirror of https://github.com/moparisthebest/curl synced 2024-11-16 06:25:03 -05:00
Code Issues Releases Wiki Activity
220776de6b
curl/lib/polarssl.c
Yang Tse 6085ca2aed Fix bad failf() and info() usage 
Calls to failf() are not supposed to provide trailing newline.
Calls to infof() must provide trailing newline.

Fixed 30 or so strings.
2012-06-14 13:32:05 +02:00

581 lines
16 KiB
C
Raw Blame History

/***************************************************************************
* _ _ ____ _
* Project ___| | | | _ \| |
* / __| | | | |_) | |
* | (__| |_| | _ <| |___
* \___|\___/|_| \_\_____|
*
* Copyright (C) 2010, 2011, Hoi-Ho Chan, <hoiho.chan@gmail.com>
* Copyright (C) 2012, Daniel Stenberg, <daniel@haxx.se>, et al.
*
* This software is licensed as described in the file COPYING, which
* you should have received as part of this distribution. The terms
* are also available at http://curl.haxx.se/docs/copyright.html.
*
* You may opt to use, copy, modify, merge, publish, distribute and/or sell
* copies of the Software, and permit persons to whom the Software is
* furnished to do so, under the terms of the COPYING file.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
***************************************************************************/
/*
* Source file for all PolarSSL-specific code for the TLS/SSL layer. No code
* but sslgen.c should ever call or use these functions.
*
*/
#include "setup.h"
#ifdef USE_POLARSSL
#ifdef HAVE_SYS_SOCKET_H
#include <sys/socket.h>
#endif
#include <polarssl/net.h>
#include <polarssl/ssl.h>
#include <polarssl/havege.h>
#include <polarssl/certs.h>
#include <polarssl/x509.h>
#include <polarssl/version.h>
#include <polarssl/entropy.h>
#include <polarssl/ctr_drbg.h>
#if POLARSSL_VERSION_NUMBER<0x01000000
/*
Earlier versions of polarssl had no WANT_READ or WANT_WRITE, only TRY_AGAIN
*/
#define POLARSSL_ERR_NET_WANT_READ POLARSSL_ERR_NET_TRY_AGAIN
#define POLARSSL_ERR_NET_WANT_WRITE POLARSSL_ERR_NET_TRY_AGAIN
#endif
#include "urldata.h"
#include "sendf.h"
#include "inet_pton.h"
#include "polarssl.h"
#include "sslgen.h"
#include "parsedate.h"
#include "connect.h" /* for the connect timeout */
#include "select.h"
#include "rawstr.h"
#define _MPRINTF_REPLACE /* use our functions only */
#include <curl/mprintf.h>
#include "curl_memory.h"
/* The last #include file should be: */
#include "memdebug.h"
/* version dependent differences */
#if POLARSSL_VERSION_NUMBER < 0x01010000
/* the old way */
#define HAVEGE_RANDOM havege_rand
#else
/* from 1.1.0 */
#define HAVEGE_RANDOM havege_random
#endif
/* Define this to enable lots of debugging for PolarSSL */
#undef POLARSSL_DEBUG
#ifdef POLARSSL_DEBUG
static void polarssl_debug(void *context, int level, char *line)
{
struct SessionHandle *data = NULL;
if(!context)
return;
data = (struct SessionHandle *)context;
infof(data, "%s\n", line);
}
#else
#endif
static Curl_recv polarssl_recv;
static Curl_send polarssl_send;
static CURLcode
polarssl_connect_step1(struct connectdata *conn,
int sockindex)
{
struct SessionHandle *data = conn->data;
struct ssl_connect_data* connssl = &conn->ssl[sockindex];
bool sni = TRUE; /* default is SNI enabled */
int ret = -1;
#ifdef ENABLE_IPV6
struct in6_addr addr;
#else
struct in_addr addr;
#endif
void *old_session = NULL;
size_t old_session_size = 0;
/* PolarSSL only supports SSLv3 and TLSv1 */
if(data->set.ssl.version == CURL_SSLVERSION_SSLv2) {
failf(data, "PolarSSL does not support SSLv2");
return CURLE_SSL_CONNECT_ERROR;
}
else if(data->set.ssl.version == CURL_SSLVERSION_SSLv3)
sni = FALSE; /* SSLv3 has no SNI */
havege_init(&connssl->hs);
/* Load the trusted CA */
memset(&connssl->cacert, 0, sizeof(x509_cert));
if(data->set.str[STRING_SSL_CAFILE]) {
ret = x509parse_crtfile(&connssl->cacert,
data->set.str[STRING_SSL_CAFILE]);
if(ret<0) {
failf(data, "Error reading ca cert file %s: -0x%04X",
data->set.str[STRING_SSL_CAFILE], ret);
if(data->set.ssl.verifypeer)
return CURLE_SSL_CACERT_BADFILE;
}
}
/* Load the client certificate */
memset(&connssl->clicert, 0, sizeof(x509_cert));
if(data->set.str[STRING_CERT]) {
ret = x509parse_crtfile(&connssl->clicert,
data->set.str[STRING_CERT]);
if(ret) {
failf(data, "Error reading client cert file %s: -0x%04X",
data->set.str[STRING_CERT], -ret);
return CURLE_SSL_CERTPROBLEM;
}
}
/* Load the client private key */
if(data->set.str[STRING_KEY]) {
ret = x509parse_keyfile(&connssl->rsa,
data->set.str[STRING_KEY],
data->set.str[STRING_KEY_PASSWD]);
if(ret) {
failf(data, "Error reading private key %s: -0x%04X",
data->set.str[STRING_KEY], -ret);
return CURLE_SSL_CERTPROBLEM;
}
}
/* Load the CRL */
memset(&connssl->crl, 0, sizeof(x509_crl));
if(data->set.str[STRING_SSL_CRLFILE]) {
ret = x509parse_crlfile(&connssl->crl,
data->set.str[STRING_SSL_CRLFILE]);
if(ret) {
failf(data, "Error reading CRL file %s: -0x%04X",
data->set.str[STRING_SSL_CRLFILE], -ret);
return CURLE_SSL_CRL_BADFILE;
}
}
infof(data, "PolarSSL: Connecting to %s:%d\n",
conn->host.name, conn->remote_port);
if(ssl_init(&connssl->ssl)) {
failf(data, "PolarSSL: ssl_init failed");
return CURLE_SSL_CONNECT_ERROR;
}
ssl_set_endpoint(&connssl->ssl, SSL_IS_CLIENT);
ssl_set_authmode(&connssl->ssl, SSL_VERIFY_OPTIONAL);
ssl_set_rng(&connssl->ssl, HAVEGE_RANDOM,
&connssl->hs);
ssl_set_bio(&connssl->ssl,
net_recv, &conn->sock[sockindex],
net_send, &conn->sock[sockindex]);
#if POLARSSL_VERSION_NUMBER<0x01000000
ssl_set_ciphers(&connssl->ssl, ssl_default_ciphers);
#else
ssl_set_ciphersuites(&connssl->ssl, ssl_default_ciphersuites);
#endif
if(!Curl_ssl_getsessionid(conn, &old_session, &old_session_size)) {
memcpy(&connssl->ssn, old_session, old_session_size);
infof(data, "PolarSSL re-using session\n");
}
ssl_set_session(&connssl->ssl, 1, 600,
&connssl->ssn);
ssl_set_ca_chain(&connssl->ssl,
&connssl->cacert,
&connssl->crl,
conn->host.name);
ssl_set_own_cert(&connssl->ssl,
&connssl->clicert, &connssl->rsa);
if(!Curl_inet_pton(AF_INET, conn->host.name, &addr) &&
#ifdef ENABLE_IPV6
!Curl_inet_pton(AF_INET6, conn->host.name, &addr) &&
#endif
sni && ssl_set_hostname(&connssl->ssl, conn->host.name)) {
infof(data, "WARNING: failed to configure "
"server name indication (SNI) TLS extension\n");
}
#ifdef POLARSSL_DEBUG
ssl_set_dbg(&connssl->ssl, polarssl_debug, data);
#endif
connssl->connecting_state = ssl_connect_2;
return CURLE_OK;
}
static CURLcode
polarssl_connect_step2(struct connectdata *conn,
int sockindex)
{
int ret;
struct SessionHandle *data = conn->data;
struct ssl_connect_data* connssl = &conn->ssl[sockindex];
char buffer[1024];
conn->recv[sockindex] = polarssl_recv;
conn->send[sockindex] = polarssl_send;
for(;;) {
if(!(ret = ssl_handshake(&connssl->ssl)))
break;
else if(ret != POLARSSL_ERR_NET_WANT_READ &&
ret != POLARSSL_ERR_NET_WANT_WRITE) {
failf(data, "ssl_handshake returned -0x%04X", -ret);
return CURLE_SSL_CONNECT_ERROR;
}
else {
if(ret == POLARSSL_ERR_NET_WANT_READ) {
connssl->connecting_state = ssl_connect_2_reading;
return CURLE_OK;
}
if(ret == POLARSSL_ERR_NET_WANT_WRITE) {
connssl->connecting_state = ssl_connect_2_writing;
return CURLE_OK;
}
failf(data, "SSL_connect failed with error %d.", ret);
return CURLE_SSL_CONNECT_ERROR;
}
}
infof(data, "PolarSSL: Handshake complete, cipher is %s\n",
#if POLARSSL_VERSION_NUMBER<0x01000000
ssl_get_cipher(&conn->ssl[sockindex].ssl)
#elif POLARSSL_VERSION_NUMBER >= 0x01010000
ssl_get_ciphersuite(&conn->ssl[sockindex].ssl)
#else
ssl_get_ciphersuite_name(&conn->ssl[sockindex].ssl)
#endif
);
ret = ssl_get_verify_result(&conn->ssl[sockindex].ssl);
if(ret && data->set.ssl.verifypeer) {
if(ret & BADCERT_EXPIRED)
failf(data, "Cert verify failed: BADCERT_EXPIRED");
if(ret & BADCERT_REVOKED) {
failf(data, "Cert verify failed: BADCERT_REVOKED");
return CURLE_SSL_CACERT;
}
if(ret & BADCERT_CN_MISMATCH)
failf(data, "Cert verify failed: BADCERT_CN_MISMATCH");
if(ret & BADCERT_NOT_TRUSTED)
failf(data, "Cert verify failed: BADCERT_NOT_TRUSTED");
return CURLE_PEER_FAILED_VERIFICATION;
}
if(conn->ssl[sockindex].ssl.peer_cert) {
/* If the session was resumed, there will be no peer certs */
memset(buffer, 0, sizeof(buffer));
if(x509parse_cert_info(buffer, sizeof(buffer), (char *)"* ",
conn->ssl[sockindex].ssl.peer_cert) != -1)
infof(data, "Dumping cert info:\n%s\n", buffer);
}
connssl->connecting_state = ssl_connect_3;
infof(data, "SSL connected\n");
return CURLE_OK;
}
static CURLcode
polarssl_connect_step3(struct connectdata *conn,
int sockindex)
{
CURLcode retcode = CURLE_OK;
struct ssl_connect_data *connssl = &conn->ssl[sockindex];
struct SessionHandle *data = conn->data;
void *old_ssl_sessionid = NULL;
ssl_session *our_ssl_sessionid = &conn->ssl[sockindex].ssn ;
int incache;
DEBUGASSERT(ssl_connect_3 == connssl->connecting_state);
/* Save the current session data for possible re-use */
incache = !(Curl_ssl_getsessionid(conn, &old_ssl_sessionid, NULL));
if(incache) {
if(old_ssl_sessionid != our_ssl_sessionid) {
infof(data, "old SSL session ID is stale, removing\n");
Curl_ssl_delsessionid(conn, old_ssl_sessionid);
incache = FALSE;
}
}
if(!incache) {
void *new_session = malloc(sizeof(ssl_session));
if(new_session) {
memcpy(new_session, our_ssl_sessionid,
sizeof(ssl_session));
retcode = Curl_ssl_addsessionid(conn, new_session,
sizeof(ssl_session));
}
else {
retcode = CURLE_OUT_OF_MEMORY;
}
if(retcode) {
failf(data, "failed to store ssl session");
return retcode;
}
}
connssl->connecting_state = ssl_connect_done;
return CURLE_OK;
}
static ssize_t polarssl_send(struct connectdata *conn,
int sockindex,
const void *mem,
size_t len,
CURLcode *curlcode)
{
int ret = -1;
ret = ssl_write(&conn->ssl[sockindex].ssl,
(unsigned char *)mem, len);
if(ret < 0) {
*curlcode = (ret == POLARSSL_ERR_NET_WANT_WRITE) ?
CURLE_AGAIN : CURLE_SEND_ERROR;
ret = -1;
}
return ret;
}
void Curl_polarssl_close_all(struct SessionHandle *data)
{
(void)data;
}
void Curl_polarssl_close(struct connectdata *conn, int sockindex)
{
rsa_free(&conn->ssl[sockindex].rsa);
x509_free(&conn->ssl[sockindex].clicert);
x509_free(&conn->ssl[sockindex].cacert);
x509_crl_free(&conn->ssl[sockindex].crl);
ssl_free(&conn->ssl[sockindex].ssl);
}
static ssize_t polarssl_recv(struct connectdata *conn,
int num,
char *buf,
size_t buffersize,
CURLcode *curlcode)
{
int ret = -1;
ssize_t len = -1;
memset(buf, 0, buffersize);
ret = ssl_read(&conn->ssl[num].ssl, (unsigned char *)buf, buffersize);
if(ret <= 0) {
if(ret == POLARSSL_ERR_SSL_PEER_CLOSE_NOTIFY)
return 0;
*curlcode = (ret == POLARSSL_ERR_NET_WANT_READ) ?
CURLE_AGAIN : CURLE_RECV_ERROR;
return -1;
}
len = ret;
return len;
}
void Curl_polarssl_session_free(void *ptr)
{
free(ptr);
}
size_t Curl_polarssl_version(char *buffer, size_t size)
{
unsigned int version = version_get_number();
return snprintf(buffer, size, "PolarSSL/%d.%d.%d", version>>24,
(version>>16)&0xff, (version>>8)&0xff);
}
static CURLcode
polarssl_connect_common(struct connectdata *conn,
int sockindex,
bool nonblocking,
bool *done)
{
CURLcode retcode;
struct SessionHandle *data = conn->data;
struct ssl_connect_data *connssl = &conn->ssl[sockindex];
curl_socket_t sockfd = conn->sock[sockindex];
long timeout_ms;
int what;
/* check if the connection has already been established */
if(ssl_connection_complete == connssl->state) {
*done = TRUE;
return CURLE_OK;
}
if(ssl_connect_1==connssl->connecting_state) {
/* Find out how much more time we're allowed */
timeout_ms = Curl_timeleft(data, NULL, TRUE);
if(timeout_ms < 0) {
/* no need to continue if time already is up */
failf(data, "SSL connection timeout");
return CURLE_OPERATION_TIMEDOUT;
}
retcode = polarssl_connect_step1(conn, sockindex);
if(retcode)
return retcode;
}
while(ssl_connect_2 == connssl->connecting_state ||
ssl_connect_2_reading == connssl->connecting_state ||
ssl_connect_2_writing == connssl->connecting_state) {
/* check allowed time left */
timeout_ms = Curl_timeleft(data, NULL, TRUE);
if(timeout_ms < 0) {
/* no need to continue if time already is up */
failf(data, "SSL connection timeout");
return CURLE_OPERATION_TIMEDOUT;
}
/* if ssl is expecting something, check if it's available. */
if(connssl->connecting_state == ssl_connect_2_reading
|| connssl->connecting_state == ssl_connect_2_writing) {
curl_socket_t writefd = ssl_connect_2_writing==
connssl->connecting_state?sockfd:CURL_SOCKET_BAD;
curl_socket_t readfd = ssl_connect_2_reading==
connssl->connecting_state?sockfd:CURL_SOCKET_BAD;
what = Curl_socket_ready(readfd, writefd, nonblocking?0:timeout_ms);
if(what < 0) {
/* fatal error */
failf(data, "select/poll on SSL socket, errno: %d", SOCKERRNO);
return CURLE_SSL_CONNECT_ERROR;
}
else if(0 == what) {
if(nonblocking) {
*done = FALSE;
return CURLE_OK;
}
else {
/* timeout */
failf(data, "SSL connection timeout");
return CURLE_OPERATION_TIMEDOUT;
}
}
/* socket is readable or writable */
}
/* Run transaction, and return to the caller if it failed or if
* this connection is part of a multi handle and this loop would
* execute again. This permits the owner of a multi handle to
* abort a connection attempt before step2 has completed while
* ensuring that a client using select() or epoll() will always
* have a valid fdset to wait on.
*/
retcode = polarssl_connect_step2(conn, sockindex);
if(retcode || (nonblocking &&
(ssl_connect_2 == connssl->connecting_state ||
ssl_connect_2_reading == connssl->connecting_state ||
ssl_connect_2_writing == connssl->connecting_state)))
return retcode;
} /* repeat step2 until all transactions are done. */
if(ssl_connect_3==connssl->connecting_state) {
retcode = polarssl_connect_step3(conn, sockindex);
if(retcode)
return retcode;
}
if(ssl_connect_done==connssl->connecting_state) {
connssl->state = ssl_connection_complete;
conn->recv[sockindex] = polarssl_recv;
conn->send[sockindex] = polarssl_send;
*done = TRUE;
}
else
*done = FALSE;
/* Reset our connect state machine */
connssl->connecting_state = ssl_connect_1;
return CURLE_OK;
}
CURLcode
Curl_polarssl_connect_nonblocking(struct connectdata *conn,
int sockindex,
bool *done)
{
return polarssl_connect_common(conn, sockindex, TRUE, done);
}
CURLcode
Curl_polarssl_connect(struct connectdata *conn,
int sockindex)
{
CURLcode retcode;
bool done = FALSE;
retcode = polarssl_connect_common(conn, sockindex, FALSE, &done);
if(retcode)
return retcode;
DEBUGASSERT(done);
return CURLE_OK;
}
#endif
Reference in New Issue View Git Blame Copy Permalink