moparisthebest/curl
1
0
Fork 0
mirror of https://github.com/moparisthebest/curl synced 2024-11-17 15:05:02 -05:00
Code Issues Releases Wiki Activity
1d23affbc5
curl/CHANGES
Daniel Stenberg 43ae26f146 fixes!
2004-07-28 22:00:14 +00:00

1351 lines
58 KiB
Plaintext
Raw Blame History

_ _ ____ _
___| | | | _ \| |
/ __| | | | |_) | |
| (__| |_| | _ <| |___
\___|\___/|_| \_\_____|
Changelog
Daniel (28 July 2004)
- Bertrand Demiddelaer fixed the host name to get setup properly even when a
connection is re-used, when a proxy is in use. Previously the wrong Host:
header could get sent when re-using a proxy connection to a different target
host.
- Fixed Brian Akins' reported problems with duplicate Host: headers on re-used
connections. If you attempted to replace the Host: header in the second
request, you got two such headers!
- src/Makefile.am now includes the Makefile.inc file to get info about files
Daniel (26 July 2004)
- Made "curl [URL] -o name#2" work as expected. If there's no globbing for the
#-number, it will simply be used as #2 in the file name.
- Bertrand Demiddelaer fixed testing with valgrind 2.1.x and added two missing
newlines in the cookie informationals.
Daniel (24 July 2004)
- I fixed the autobuilds with ares, since they now need to have buildconf run
in the ares dir before the configure script is run.
- Added Casey O'Donnell's curl_easy_reset() function. It has a proto in
curl/curl.h but we have no man page yet.
Daniel (20 July 2004)
- Added buildconf and buildconf.bat to the release archives, since they are
handy for rebuilding curl when using a daily snapshot (and not a pure CVS
checkout).
Daniel (16 July 2004)
- As suggested by Toby Peterson, libcurl now ignores Content-Length data if the
given size is a negative number. Test case 178 verifies this.
Daniel (14 July 2004)
- Günter Knauf has made the Netware builds do without the config-netware.h
files, so they are now removed from the dist packages.
- Günter Knauf made curl and libcurl build with Borland again.
- Andres Garcia fixed the common test 505 failures on windows.
Daniel (6 July 2004)
- Andrés García found out why the windows tests failed on file:// "uploads".
Daniel (2 July 2004)
- Andrés García reported a curl_share_cleanup() crash that occurs when no
lock/unlock callbacks have been set and the share is cleaned up.
Daniel (1 July 2004)
- When using curl --trace or --trace-ascii, no trace messages that were sent
by curl_easy_cleanup() were included in the trace file. This made the
message "Closing connection #0" never appear in trace dumps.
Daniel (30 June 2004)
- Niels van Tongeren found that setting CURLOPT_NOBODY to TRUE doesn't disable
a previously set POST request, making a very odd request get sent (unless
you disabled the POST) a HEAD request with a POST request-body. I've now
made CURLOPT_NOBODY enforce a proper HEAD. Added test case 514 for this.
Daniel (29 June 2004)
- Günter Knauf made the testcurl.pl script capable of using a custom setup
file to easier run multiple autobuilds on the same source tree.
- Gisle fixed the djgpp build and fixed a memory problem in some of the
reorged name resolved code.
- Fixed code to allow connects done using the multi interface to attempt the
next IP when connecting to a host that resolves to multiple IPs and a
connect attempt fails.
Daniel (27 June 2004)
- Based on Rob Stanzel's bug report #979480, I wrote a configure check that
checks if poll() can be used to wait on NULL as otherwise select() should be
used to do it. The select() usage was also fixed according to his report.
Mac OS X 10.3 says "poll() functionality for Mac OS X is implemented via an
emulation layer on top of select(), not in the kernel directly. It is
recommended that programs running under OS X 10.3 prefer select() over
poll(). Configure scripts should look for the _POLL_EMUL_H_ define (instead
of _POLL_H_ or _SYS_POLL_H_) and avoid implementations where poll is not
implemented in the kernel."
Yes, we can probably use select() on most platforms but today I prefered to
leave the code unaltered.
Daniel (24 June 2004)
- The standard curl_version() string now only includes version info about
involved libraries and not about particular features. Thus it will no longer
include info about ipv6 nor GSS. That info is of course still available in
the feature bitmask curl_version_info() offers.
- Replaced all occurances of sprintf() with snprintf(). This is mostly because
it is "A Good Thing" rather than actually fixing any known problem. This
will help preventing future possible mistakes to cause buffer overflows.
- Major reorganization in the host resolve code (again). This time, I've
modified the code to now always use a linked list of Curl_addrinfo structs
to return resolved info in, no matter what resolver method or support that
is available on the platform. It makes it a lot easier to write code that
uses or depends on resolved data.
Internally, this means amongst other things that we can stop doing the weird
"increase buffer size until it works" trick when resolving hosts on
ipv4-only with gethostbyname_r(), we support socks even on libcurls built
with ipv6 enabled (but only to socks servers that resolve to an ipv4
address) and we no longer deep-copy or relocate hostent structs (we create
Curl_addrinfo chains instead).
The new "hostent to Curl_addrinfo" converter function is named Curl_he2ai()
and is slightly naive and simple, yet I believe it is functional enough to
work for libcurl.
Daniel (22 June 2004)
- David Cohen pointed out that RFC2109 says clients should allow cookies to
contain least 4096 bytes while libcurl only allowed 2047. I raised the limit
to 4999 now and made the used buffer get malloc()ed instead of simply
allocated on stack as before. Extended test case 46 to include a cookie with
very huge content to verify the fix.
- Günter Knauf fixed getdate.y to remove a few warnings. I removed the
ifdef'ed test we never ever use anyway.
- Gisle Vanem fixed the certificate wildcard checks to support a '*'-letter
anywhere in the wildcard string, support multiple '*'-letters in the
wildcard and to allow the '*'-letter to match a string that includes a dot.
Daniel (21 June 2004)
- testcurl.sh is now removed completely, tests/testcurl.pl is the script to
use when autobuilding curl!
- Kjetil Jacobsen brought my attention to the fact that you cannot properly
abort an upload with the readfunction callback, since returning 0 or -1 only
stops the upload and libcurl will continue waiting for downloaded data and
the server often waits for the rest of the upload data to arrive.
Thus, I've now added the ability for read callbacks to return
CURL_READFUNC_ABORT to abort an upload from a read callback. This will stop
the transfer immediately with a CURLE_ABORTED_BY_CALLBACK return code.
Test case 513 was added to verify that it works. I had to improve the test
HTTP server too to dump the request to a file even when the client
disconnects prematurely.
Daniel (19 June 2004)
- Luca Alteas provided a test case with a failing curl operation: when we POST
to a site with --digest (or similar) set, and the server responded with a 302
Location: to the "authprobe" request, it was not treated correctly. We still
will behave badly if FOLLOWLOCATION is enabled for this case, but I'm not
in the mood to dive into this right now and will leave it as-is for now.
Verified my fix with test case 177.
Daniel (18 June 2004)
- Gisle Vanem's patch that provides more details from the SSL layers (if you
use an OpenSSL version that supports it). It also introduces two new types
of data that can be sent to the debug callback: CURLINFO_SSL_DATA_IN and
CURLINFO_SSL_DATA_OUT.
- With David Byron's test server I could repeat his problem and make sure that
POSTing over HTTPS:// with NTLM works fine now. There was a general problem
with multi-pass authentication with non-GET operations with CONNECT.
Daniel (16 June 2004)
- Modified to keep the upload byte counter in an curl_off_t, not an int as
before. 32bits is not enough. This is most likely the bug Jean-Louis Lemaire
reported that makes 2GB FTP uploads to report error ("unaligned file sizes")
when completed.
Daniel (15 June 2004)
- Luca Alteas reported a problem that I fixed: if you did a POST with
CURLAUTH_DIGEST set but the server didn't require any authentication,
libcurl would repeatedly send HEAD lots of times until it gives up. This was
actually the case for all multi-pass authentications. Added test case 174,
175 and 176 to verify this.
Daniel (14 June 2004)
- Multipart formposts uploading files no longer inserts the files themselves
into the huge prebuilt chunk. This enables libcurl to formpost files that is
larger than the amount of system memory. When the file given is passed on
stdin, libcurl still uses the old method of reading the full fill before the
upload takes place. This approach was selected in order to not alter the
behavior for existing applications, as when using stdin libcurl can't know
the size of the upload and chunked transfer-encoding can only be used on
HTTP 1.1 servers.
Daniel (13 June 2004)
- Gisle found out that we did wildcard cert name checks wrong, so that parts
of the check wrongly was case sensitive.
Daniel (11 June 2004)
- Tim Sneddon brought a minor VMS fix to make curl build properly on his VMS
machine. He also had some interesting libcurl patches... they might be able
to do in a slightly nicer way. Discussions are in progress.
Daniel (10 June 2004)
- Gisle Vanem brought code cleanupsm better verbose output and better connect
timeout handling when attempting to connect to a host that resolves to
multiple IP addresses.
- Steven Bazyl and Seshubabu Pasam pointed out a bug on win32 when freeing the
path after a file:// transfer.
Daniel (9 June 2004)
- Alexander Krasnostavsky made 'configure --disable-http' work to build libcurl
without HTTP support. I added a new return code for curl_formadd() in case
libcurl is built with HTTP disable: CURL_FORMADD_DISABLED.
- Alexander Krasnostavsky pointed out a missing file in the generated
curllib.dsp file, and now people building with this should get a libcurl.lib
file generated as it used to do before we generated this file.
Daniel (8 June 2004)
- Marty Kuhrt fixed a minor build problem for VMS.
Daniel (7 June 2004)
- Reverted the configure check from the 4th since it obviously didn't work.
Remade it in a different manner that hopefully works better.
Daniel (4 June 2004)
- Günter Knauf brought patches to make curl build fine on NetWare again.
- Made the configure checks for strerror_r() not exit the configure script
when built for cross-compiling.
Daniel (3 June 2004)
- Chris Gaukroger pointed out that 'make test' attempts to run the tests even
if curl is built cross-compiled. I've now made it output a short message
instead, saying it isn't possible to do.
- Alexander Krasnostavsky brought FTP 3rd party transfer support to libcurl.
You can now use libcurl to transfer files between two remote hosts using
FTP. There are a bunch of new options to control this with:
CURLOPT_SOURCE_HOST
CURLOPT_SOURCE_USERPWD
CURLOPT_SOURCE_PATH
CURLOPT_SOURCE_PORT
CURLOPT_PASV_HOST
CURLOPT_SOURCE_PREQUOTE
CURLOPT_SOURCE_POSTQUOTE
(They still remain to be documented properly in the curl_easy_setopt man
page.)
When using this, the ordinary CURLOPT_URL specifies the target URL, and you
specify the source data with these additional options. ftp3rdparty.c is a
new example source code showing how to use this.
- Vincent Bronner fixed the HTTP Digest code to use the proxy user name and
password when doing proxy authentication, it previously always used the host
user name and password!
Daniel (2 June 2004)
- CURLOPT_UPLOAD and CURLOPT_PUT now do the exact same thing internally, which
fixes some old confusions on when which of these should be used and what the
differences are.
- Applied Gisle's fixes to make curl build fine with lcc-win32
Version 7.12.0 (2 June 2004)
Daniel (1 June 2004)
- I clarified the --create-dirs option somewhat in the curl man page.
- Renaud Duhaut corrected the curl_unescape man page.
- David Byron modified one of Massimiliano Ziccardi's recent MSVC makefile
changes to now again use the mm lib by default.
Daniel (26 May 2004)
- Mohun Biswas added release-zlib and debug-zlib targets to the MSVC libcurl
Makefile
- David Byron reported a problem with proxy authentication when doing CONNECT,
like when accessing HTTPS sites wiht a proxy. This probably broke when I
rewrote the auth stuff recently.
- I added fileupload.c in the examples directory, showing how an upload to a
file:// URL is made.
Daniel (25 May 2004)
- Massimiliano Ziccardi updated the MSVC makefiles.
Daniel (24 May 2004)
- libcurl now supports "uploading" to file:// URLs. Test 204 and 205 were
added to verify.
- Simon Josefsson added a idn_free() function in libidn 0.4.5 as a reaction to
Gisle's previous mail. We now use this function, and thus we require libidn
0.4.5 or later. No earlier version will do.
- Robert D. Young reported that CURLOPT_COOKIEFILE and CURLOPT_COOKIE could
not be used both in one request. Fixed it and added test case 172 to verify.
Daniel (21 May 2004)
- While talking to host a.b.c, libcurl did wrongly not accept cookies that
were set to the domain .a.b.c (that is with a dot prefix). This is now fixed
and test case 171 verifies it.
Daniel (20 May 2004)
- Jesse Noller reported that the upload speed info reported by libcurl was
wrong. The same was true for the download speed. Fixed now.
Daniel (19 May 2004)
- David Byron added test case 170 - this used to crash the previous version of
curl.
Daniel (17 May 2004)
- Peter Sylvester's patch that addresses two flaws in the peer certificate
name verification:
o when multiple common names are used (as in the curl tests), the last name
needs to be selected.
o allow comparing with encoded values, at least with BMP and ISO latin1
encoded T61strings.
- All 191 test cases run through the torture test OK! 'make test-torture' is
now available in the root makefile (on configure-based environments).
Daniel (14 May 2004)
- With a slightly modified ftpserver.pl I've now run almost all tests through
with runtests.pl -t. This is goodness!
- Since I have been unable to contact the CVS admins for several months, I've
decided that the current CVS hosting was not good enough. I've now moved the
CVS repo once again, see README for updated cvs checkout instructions.
Daniel (13 May 2004)
- runtests.pl -t now runs fine all the way to test 100. I believe test case
100 fails because of an FTP server problem.
Daniel (12 May 2004)
- General cleanups all over to make libcurl survive and do well when a memory
function returns NULL. runtests.pl -t now works fine for the first 26 test
cases.
Daniel (11 May 2004)
- Seshubabu Pasam provided a patch that introduces curl_global_init_mem() -
like normal curl_global_init() but allows the app to replace all memory
functions with its own set. I modified it slightly.
- Based on Luca Alteas' comments, I modified the curllib.dsp generation code.
Daniel (10 May 2004)
- Gisle mailed Simon Josefsson (of libidn fame) about the benefits of a
separate free()-function by that lib to make sure the memory is freed by the
same memory subsystem that allocated it. He responded positively and this
will likely cause us to require a newer version of libidn as soon as Simon
releases one with such a libidn_free() function.
- James Bursa made runtests.pl's -t option work for any given test case, and I
edited to allow -g too. Not even test case 1 worked...
- Luca Altea made the nc= field not use quotes in outgoing HTTP Digest headers.
- Andrés García fixed a problem in the test script that made it fail to
recognize our own running HTTP server.
Daniel (7 May 2004)
- James Bursa fixed the memanalyze.pl script to conder malloc(0) areas OK to
free() and he made two failed-resolve error messages use the new display-
name instead of the internally-used name.
- Gisle Vanem tried curl with
www.etdomenenavnkanmaksimaltinneholdesekstitrebokstaversliksomdette.com
which caused problems, and I fixed the single zero byte buffer overwrite
that occurred (due to a stupid protocol buffer size and parser).
- Made the lib/curllib.dsp file get generated automaticly when a distribution
package is made, with the msvcproj.* files as templates and all
win32-sources added. I think this can be made to work better than the always
lagging-behind previous approach. I'm not sure this builds a working project
file right now though!
Daniel (6 May 2004)
- Michael Benedict brought a fix that fills in the errorbuffer properly when
ares fails to resolve a name for a case not previously dealt with like this.
Daniel (5 May 2004)
- Joe Halpin fixed the annoying typecast warning in lib/ldap.c
- Gisle Vanem fixes:
o memdebug to not access NULL on several places
o libcurl.def; curl_formparse is gone.
o progress.c; fixed the percent values being trunced to 0.
o if2ip.*; constified the 'interface' argument.
- Tor Arntsen reported that many of his autobuilds froze and I found and fixed
a problem introduced with the HTTP auth overhaul that could lead to a
never-ending internal request-loop due to un-initialized variables!
- Removed several compiler warnings on various compilers/platforms.
Daniel (4 May 2004)
- curl_formparse() has been removed from the library. It has been marked and
mentioned as deprecated for several years.
Daniel (3 May 2004)
- Rewritten HTTP authentication code. The previous code could not properly
deal with the added test cases 167, 168 and 169. I've now rewritten the code
to better separate host and proxy authentication and not re-use the same
variables as much as before as it proved non working in the more involved
cases. All the current tests run OK now, and so do the new ones. The curl
tool got a new option named --proxy-digest to enable HTTP Digest
authentication with the proxy. I also made the library support it.
- Gisle Vanem made the LDAP code work with wldap32.dll as supplied with
Win-98/ME/2000/XP, so no extra .dlls are required when curl/libcurl is used
on these Windows versions.
Daniel (30 April 2004)
- runtests.pl now scans the valgrind log for valgrind-detected memory leaks
after each test case if valgrind was found and used.
- I modified the app-code in curl to include the new lib/curlx.h and only
access those functions using the curlx_-prefix in preparation for the future
removal of several curl_-functions from the public libcurl API.
- Introduced lib/curlx.h as a single header to provide the curlx_-functions
to apps.
- Added notices in the man pages for curl_getenv, curl_mprintf, curl_strequal
and curl_strnequal that they are subject for removal in a future release.
STOP USING THESE FUNCTIONS.
- Mihai Ionescu noticed he couldn't do formposts with whitespace in the file
names and yes, I broke that on April 23. Sigh. I fixed it now and added
test case 166 to verify it.
- Luca Altea pointed out a mistake left from the Digest patch of yesterday.
Daniel (29 April 2004)
- Made IDN domains work when sending requsts over HTTP proxy as well. Added
test case 165 to verify the functionality.
- Fixed a bug in the new internal host name setup when re-using connections.
- James Bursa found out that curl_easy_duphandle() with ares-built libcurl
created a bad handle that would crash in the first name resolve attempt. This
is now fixed and test case 512 was added to verify it.
- Luca Altea provided a major HTTP Digest code fix and cleanup. We now follow
the Digest RFC a lot better.
- Gisle Vanem made the SSL code use ERR_error_string_n() where applicable.
Daniel (27 April 2004)
- I remodeled Gisle's IDN code slightly and now we convert both the host name
and proxy name to the ACE encoded version to use internally for resolves and
cookies etc. They are now using one 'struct hostname' each that keep both
the original name and the possibly encoded name. IDN resolves work for me
now using ipv6, ipv4 and ares resolving. Even cookies on IDN sites seem to
do right. I got some failures at first when CHARSET wasn't set at all which
confused libidn completely and it decided by encoding of choice was
'ANSI_X3.4-1968'...
- made 'configure --without-libidn' work
Daniel (25 April 2004)
- Fixed the src/hugehelp.c file to include "setup.h" instead of "config.h" to
make the problems with USE_MANUAL on windows go away.
- configure --without-ssl could still wrongly include some OpenSSL info in the
Makefiles if pkg-config had info about OpenSSL. Bug #941762 reported by
Martin.
- Since we can now build and use quite a large set of 3rd party libraries, I
decided I would make configure produce a summary at the end showing what
libraries it uses and if not, what option to use to make it use that. I also
added some other random info that is nice in a "configure summary" output.
- Applied TommyTam's patch that now make curl work with telnet and stdin
properly on Windows.
- The changes for today below were made by me and Gisle Vanem.
The file previously known as hostip.c has now undergone a huge cleanup and
split:
hostip.c explained
==================
The main COMPILE-TIME DEFINES to keep in mind when reading the host*.c
source file are these:
CURLRES_IPV6 - this host has getaddrinfo() and family, and thus we use
that. The host may not be able to resolve IPv6, but we don't really have to
take that into account. Hosts that aren't IPv6-enabled have CURLRES_IPV4
defined.
CURLRES_ARES - is defined if libcurl is built to use c-ares for asynchronous
name resolves. It cannot have ENABLE_IPV6 defined at the same time, as
c-ares has no ipv6 support. This can be Windows or *nix.
CURLRES_THREADED - is defined if libcurl is built to run under (native)
Windows, and then the name resolve will be done in a new thread, and the
supported asynch API will be the same as for ares-builds.
If any of the two previous are defined, CURLRES_ASYNCH is defined too. If
libcurl is not built to use an asynchronous resolver, CURLRES_SYNCH is
defined.
The host*.c sources files are split up like this:
hostip.c - method-independent resolver functions and utility functions
hostasyn.c - functions for asynchronous name resolves
hostsyn.c - functions for synchronous name resolves
hostares.c - functions for ares-using name resolves
hostthre.c - functions for threaded name resolves
hostip4.c - ipv4-specific functions
hostip6.c - ipv6-specific functions
The hostip.h is the single united header file for all this. It defines the
CURLRES_* defines based on the config*.h and setup.h defines.
- Added function header comments to many functions in an attempt to better
explain the purpose of them all.
- configure --with-libidn is now supported. It makes the configure script
check for libidn libs and include files in the prefix path given. If you
say --with-libidn=/usr/local, it will check for the lib in /usr/local/lib
and the includes in /usr/local/include etc.
- curl_version_info() now returns a struct aged CURLVERSION_THIRD including
libidn version info. The string curl_version() returns also includes libidn
version info, if available.
Version 7.11.2 (26 April 2004)
Daniel (25 April 2004)
- Erwin Authried pointed out that configure --disable-manual didn't do right
if you already had a src/hugehelp.c source file present (which most people
do I guess). It now uses the USE_MANUAL define properly.
Daniel (23 April 2004)
- Gisle Vanem found and fixed a memory leak when doing (failing) Windows
threaded name resolves.
- I also added test case 163 just to make sure -F "var=<file" works fine and
can pass on characters such as newlines, carriage-return and tabs.
- When we added test case 162 without adding the necessary requirement field
in the test meta data we could see that curl didn't complain if you used
--proxy-ntlm even if the underlying libcurl it uses has no NTLM support! I
now made it check this first, and it now exists with a "the installed
libcurl version doesn't support this" message if it happens again.
Daniel (22 April 2004)
- David Byron found and fixed a small bug with the --fail and authentication
stuff added a few weeks ago. Turns out that if you specify --proxy-ntlm and
communicate with a proxy that requires basic authentication, the proxy
properly returns a 407, but the failure detection code doesn't realize it
should give up, so curl returns with exit code 0. Test case 162 added to
verify the functionality.
- allow newlines in the contents when doing -F "var=[contents]"
Robert Marlow reported.
- If a transfer is found out to be only partial, libcurl will now treat that
as a problem serious enough to skip the final QUIT command before closing
the control connection. To avoid the risk that it will "hang" waiting for
the QUIT response. Added test case 161 to verify this.
Daniel (21 April 2004)
- Modified the heuristics for dealing with the test 160 scenario. When a
connection is re-used and nothing at all is received from it (because the
server closes the connection), we will now retry the request on a fresh new
connection. The previous ECONNRESET stuff from January 30 was removed again
as it didn't detect the situation good enough.
Daniel (20 April 2004)
- Added test case 160 to verify that curl works correctly when it gets a
connection reset when trying to re-use a connection. It should then simply
create a new connection and resend the request.
Daniel (19 April 2004)
- No more 512 byte limit for host name (inclusing name + password) in libcurl.
An added bonus is that we use less memory for the typical (shorter URL)
case.
- Cleaned up the sources to better use the terms 'hostname' and 'path'
internally when referring to that data. The buffers used for keep that info
is called 'namebuffer' and 'pathbuffer'. Much easier to read and understand
than the previous mess.
Daniel (15 April 2004)
- Modified runtests.pl again to remove all log files in the log/ dir between
each test, and then made -p display all non-zero byte files in the log dir.
It should make that data more usable and contain less rubbish.
- ftpserver.pl now produces log files more similar to how the sws ones look
and they now also contains a bit more details to help debugging ftp
problems.
- Removed the fixed maximum amount of dir levels the FTP code supported.
Previously we had a fixed array for 100 levels, now we save space in each
handle by allocating only for a few level by default and then enlarging that
in case of need (with no maximum depth). Adjusted test case 142 to verify
that 150 dir levels work fine. An added bonus is that we use less memory
for the typical (not very deep) case.
Daniel (14 April 2004)
- Asking for CURL_IPRESOLVE_V6 when ipv6 addresses can't be resolved will
now cause the resolve function to return NULL immediately. This flaw was
pointed out by Gisle Vanem.
- Gisle Vanem made curl -4/-6 actually set the desired option to libcurl.
- runtests.pl now has a new option (-p) that will display "interesting" log
files to stdout in case of a test failure. This is primarily intended to be
used in the 'full-test' make target that is used by the autobuild tests, as
we then get a much better chance to understand (remote) test failures based
on autobuild logs alone.
Daniel (13 April 2004)
- Gisle Vanem made the multi interface work again on Windows even when built
without ares. Before this, select() would return -1 during the name resolve
phase since curl_multi_fdset() didn't return any fd_set at all which wasn't
appreciated!
- curl_easy_duphandle() now duplicates the tcp_nodelay info as well.
Daniel (11 April 2004)
- Applied David Byron's patch for the MSVC libcurl makefile for builds with
zlib.
Daniel (9 April 2004)
- Dirk Manske improved the timer resolution for CURLINFO_*_TIME, it can now
be down to usec if the system sypports it.
Daniel (7 April 2004)
- A request that sends "Expect: 100-continue" and gets nothing but a single
100 response back will now return a CURLE_GOT_NOTHING. Test 158 verifies.
- The strtoofft() macro is now named curlx_strtoofft() to use the curlx_*
approach fully.
Daniel (6 April 2004)
- Gisle Vanem's fixed bug #927979 reported by Nathan O'Sullivan. The problem
made libcurl on Windows leak a small amount of memory in each name resolve
when not used as a DLL.
- New authentication code added, particularly noticable when doing POST or PUT
with Digest or NTLM. libcurl will now use HEAD to negotiate the
authentication and when done perform the requested POST. Previously libcurl
sent POST immediately and expected the server to reply a final status code
with an error and then libcurl would not send the request-body but instead
send then next request in the sequence.
The reason for this change is due to IIS6 barfing on libcurl when we attempt
to POST with NTLM authentication. The reason for the problems is found in
RFC2616 section 8.2.3 regarding how servers should deal with the 100
continue request-header:
If it responds with a final status code, it MAY close the transport
connection or it MAY continue to read and discard the rest of the
request.
Previous versions of IIS clearly did close the connection in this case,
while this newer version decided it should "read and discard". That would've
forced us to send the whole POST (or PUT) data only to have it discarded and
then be forced to send it again. To avoid that huge penality, we switch to
using HEAD until we are authenticated and then send the POST.
The only actual drawback I can think of (except for the odd sites that might
treat HEAD differently than they would treat POST/PUT when given the same
URL) is that if you do POST with CURLAUTH_ANY set and the site requires NO
authentication, libcurl will still use a HEAD in a first round and then do a
POST.
If you do a HEAD or a GET on a site using CURLAUTH_ANY, libcurl will send
an un-authenticated request at once, which then is the only request if the
site requires no auth.
Alan Pinstein helped me work out the protocol details by figuring out why
libcurl failed and what IIS6 expects.
- The --limit-rate logic was corrected and now it works a lot better for
higher speeds, such as '10m' or similar. Reported in bug report #930249.
- Introducing curlx_tvnow() and curlx_tvdiff() using the new curlx_* fashion.
#include "timeval.h" from the lib dir to get the protos etc. Note that
these are NOT part of the libcurl API. The curl app simply uses the same
source files as the library does and therefore the file needs to be compiled
and linked with curl too, not just when creating libcurl.
- lib/strerror.c no longer uses sys_nerr on non-windows platforms since it
isn't portable enough
Daniel (2 April 2004)
- In the curl_strnqual.3 man page, we now prepend the man3 dir to the file
name to work better. As pointed out by Robin Kay.
- Andrés García updated the mingw makefiles.
- Dirk Manske fixed a problem I recently added in the progress meter code that
broke subsecond resolution for CURLINFO_TOTAL_TIME. He also pointed out a
mistake in the code that produces the final update of the progress meter
that would often prevent it from actually being updated that final time.
Daniel (1 April 2004)
- Dirk Manske fixed a memory leak that happened when we use ares for name
resolves and decides to time-out before ares does it. This fix uses the
brand new ares_cancel() function which is not present in c-ares 1.1.0.
When told to enable ares, the configure script now checks for presence of
the ares_cancel function to alert users if they attempt to use a too old
c-ares library.
Daniel (31 March 2004)
- Roy Shan fixed a flaw that prevented ares name resolve timeouts to occur!
- Dirk Manske found out that libcurl timed out waiting for resolves far too
easy when libcurl was built to use (c-)ares for name resolving.
- Further Digest fixing and a successful test case 153 now makes me believe
Mitz Wark's problems are fixed.
- Andres Garcia figured out that test case 63, while working, only proved a
flaw in libcurl's 'http_proxy' parser when a user name and password is
provided. The user name was not extracted properly (and 'http' was always
used as user name).
- Andrés García fixed compiler warnings in our ioctlsocket() usage.
Daniel (30 March 2004)
- Joe Halpin faced problems with the getnameinfo() argument ai_flags and the
particular bit named 'NI_WITHSCOPEID' on Solaris 9 for Intel. I've now
written a configure test that checks for a working NI_WITHSCOPEID
implemenation. No code uses the result from this test yet, it is still
experimental. James Carlson wrote in comp.unix.solaris: "It's a bug
(5006623) -- it's not supported and shouldn't be in the header file."
- I provided Mitz Wark with a first patch in order to fix libcurl's problems
to re-negotiate Digest authentication (when 'stale=true' is included in the
response header).
- Roy Shan discovered that the multi interface didn't properly timeout name
lookups which could make handles get stuck in that state and thus never get
completed. I've produced a first test patch that attempts to correct this.
- David Byron's patch was appplied to make CURLOPT_FAILONERROR work nicely
even with authentcations such as NTLM or Digest enabled. Test cases 150, 151
and 152 were added to verify the functionality.
Daniel (29 March 2004)
- Gisle Vanem updated files for the djgpp/MS-DOS build.
- Andrés García helped me work out a fix for the runtests.pl script to make
the file:// tests run fine when tested with the mingw-built version of curl.
- Fixed an include issue with netinet/tcp.h on AIX, based on input by Tor.
This also required a minor fix of the configure script.
- The postit2.c source example used the wrong struct name for the post data.
Daniel (26 March 2004)
- Gisle Vanem improved ipv6 support on windows by making the curl build to use
the correct getaddrinfo() function.
Daniel (25 March 2004)
- It turned out that AIX, despite having a "thread-safe libc", doesn't offer
all traditional functions thread-safe. This URL is informative on this
subject:
http://publibn.boulder.ibm.com/doc_link/en_US/a_doc_lib/aixprggd/ \
genprogc/thread_quick_ref.htm
As a result of this, we now check for three *_r() functions on recent AIX
versions as well that the URL mentions aren't thread-safe in AIX 5.1.
- renamed curl_strerror.[ch] to strerror.[ch]
- Joe Halpin added CURLOPT_TCP_NODELAY and --tcp-nodelay to make it possible
for users to disable the Nagle algorthim-usage.
- Tor Arntsen provided some interesting strerror_r() knowledge. glibc has its
own API which differs from the POSIX one. Daniel adjusted the configure
script to detect the version in use, and the code now uses the new defines
accordingly.
- Fixed some build flaws with the new lib/curl_strerror.c source file.
Daniel (24 March 2004)
- Gisle Vanem's fix to replace the bad use of strerror(). This introduces
Curl_strerror() that attempts to be thread-safe _and_ works on Windows too!
- Tor Arntsen spell-fixed lots of libcurl man pages.
- Tor Arntsen made testcurl.pl work with older perl 5 versions, and Daniel
made it not use chdir .. to go back, as that isn't very good when you've
setup a testdir containing symlinks.
- Added a check for strerror_r() in the configure script.
Daniel (23 March 2004)
- Added Greg Hewgill's testcurl.pl script to CVS. We have not moved over to
use this script for the real distributed testing just yet, but it is only
a matter of time.
- Gisle Vanem provided code that makes curl report a better error message
if --interface fails on windows.
- The regular progress meter is now fixed to never wrap due to long lines. All
fields are now static sized. If the time in the time fields get a time value
that would represent a time that is 100 hours or more (if not, it remains
using a HH:MM:SS display), it switches first to a "NNNd NNh" display (for
days and hours) and if that isn't enough it switches to a "NNNd" display if
it is more than 999 days.
Several of the calculations were also moved to fixed-point math instead of
using doubles.
Daniel (22 March 2004)
- Glen Nakamura noticed CURLINFO_CONTENT_LENGTH_DOWNLOAD didn't work as it
used to do if CURLOPT_NOBODY is set TRUE.
- Kevin Roth patched the cygwin package makefile and README to adjust to
new cygwin packaging guidelines.
- Enabled "NT responses" in the NTLM authentication. Doing this simply means
that we provide an extra chunk of data in each "type-3 message". The only
reason for doing this is that it seems that using only the "Lanmanager hash"
(as we've been doing until now) doesn't support passwords longer than 14
characters and it turns out there are users out there who want to use
libcurl and NTLM with such passwords! ;-) Seven NTLM-related test cases were
updated accordingly. Mentioned as issue 29 in TODO-RELEASE, bug report
#915609
- Moved the generated libcurl version info to a new header file, named
curl/curlver.h. Now interested parties can include ONLY version info, should
anyone want that (and it seems at least some windows resource files would).
Mentioned as issue 27 in TODO-RELEASE.
Daniel (21 March 2004)
- Fixed the root Makefile to use tabs for the netware target. Günter Knauf
pointed this out.
- Marty Kuhrt's VMS cleanup
- Thomas Schwinge made buildconf recognize ACLOCAL_FLAGS to invoke aclocal
with particular pre-determined options.
Version 7.11.1 (19 March 2004)
Daniel (18 March 2004)
- Tor Arntsen brought some info about SGI IRIX:
IRIX supports 3 different executable/object formats, -32, -n32 and -64.
-n32 is default 32-bit format, -32 is the "old" 32-bit format, and -64 is
the 64-bit format. Libraries for the different formats are in lib, lib32
and lib64 respectively.
We've now adjusted the configure script to adapt to this when scanning for
3rd party libs, such as OpenSSL.
Daniel (17 March 2004)
- Watz pointed out a few missing files in the MSVC project description file.
- Günter Knauf brought patches, code and makefiles to build curl on Novell
NetWare.
Daniel (15 March 2004)
- Lots of libcurl man pages were updated to contain references to other man
pages the recognized way so that they appear as nice hyperlinks in the HTML
versions.
- buildconf now checks the m4 version too, since autoconf requires a GNU m4
version to build proper configure scripts.
Daniel (12 March 2004)
- Added CURLOPT_POSTFIELDSIZE_LARGE, the large file version of
CURLOPT_POSTFIELDSIZE to allow POSTs larger than 2GB.
- David Byron fixed an uninitialized variable case/crash.
Daniel (10 March 2004)
- Jeff Lawson fixed the SSL connection to deal with received signals during the
connect.
- Changed the OS string for win32 to become "i386-pc-win32".
Daniel (9 March 2004)
- Changed the internals to use curl_socket_t for socket variable type. This
should enable us to build with less warnings on Windows, where SOCKET is
used which is an unsigned int, while most other platforms use a mere int.
- Modified lib/config-win32.h to build fine on MSVC again.
Version 7.11.1-pre1 (8 March 2004)
Daniel (8 March 2004)
- Minor fix to make curl CURL_VERSION_LARGEFILE is only set if curl_off_t is
larger than 4 bytes.
Daniel (4 March 2004)
- Improved PUT/POST with NTLM/Digest authentication, the so called issue 12.
- Modified the test HTTP server a lot to work with the upcoming changes for
PUT/POST with NTLM/Digest authentication (like test case 88). Added Andrés
García's win32-changes. Improved the logging.
- Fixed the file:-related progress/getinfo stuff a bit more.
Daniel (4 March 2004)
- I corrected a problem with the multi interface when following a Location:
header or when doing multiple-request authentications. A subsequent request
could erroneously re-use a previous connection that was sent with
Connection: close. Christopher R. Palmer reported.
- Andrés García patched curl to prevent warnings while compiling with mingw,
mainly because it is now possible to have both WIN32 and HAVE_CONFIG_H
defined.
- When transferring files from a file: URL, the progress meter and other
transfer metrics were not updated properly.
- David Byron provided a "version resource" file to the curl executable for
the windows builds.
Daniel (3 March 2004)
- David Byron's work on making libcurl only require winsock 1.1 on Windows
machines.
- More variable cleanups based on compiler warnings generated by Tor Arntsen's
autobuilds with MIPSPro.
- Joe Halpin helped us fix some pedantic compiler warnings on FreeBSD.
- Applied Tom Bates' patch to build on nsr-tandem-nsk.
- Dan Fandrich corrected some flaws in the configure GSS detection.
Daniel (2 March 2004)
- Fixed the libcurl code to use FORMAT_OFF_T for printf() formatting
curl_off_t types internally.
Daniel (1 March 2004)
- Added CURL_VERSION_LARGEFILE as a feature-bit in the curl_version_info()
response, that signals if this libcurl supports >2GB files. curl -V now
outputs 'Largefile' in the Features: field if this is the case. Most systems
are likely to support this.
- We offer a CURL_FORMAT_OFF_T define in the public header, which can be used
to printf() curl_off_t variables. We also modified the libcurl sources to
use this define instead of the previous %Od approach (although I've left the
O-flag functional in the code). This should also prevent compilers to warn
on the home-grown option.
- Fixed the resume-check code to test for a working resume at the end of the
headers and not at the first body-byte.
- CURLOPT_DNS_USE_GLOBAL_CACHE is now considered obsolete. Stop using it. If
you need a global DNS cache for whatever reason, use the share interface and
you'll get a global cache that works the way it should work. You can even
have any number of global caches, all at your command. This is now also
mentioned in the docs.
- Made the *printf code support the z-flag to enable size_t printf() in a
manner similar to how glibc allows it. To make printfing of this work on
platforms with 64bit size_t and 32bit ints. If there even are any! ;-)
- Christopher R. Palmer discovered that if you CURLOPT_FRESH_CONNECT and
CURLAUTH_NTLM (or CURLAUTH_ANY and libcurl then picked NTLM), libcurl would
loop without succeeding to authenticate due to the new connection that was
made for all round-trips in the authentication. Now, the FRESH_CONNECT is
remade to only matter for the first connection made with curl_easy_perform()
and all the rest that might follow due to FOLLOWLOCATION or HTTP
authentication are now ignoring that option.
- Adjusted the QUIT code slightly since it could core-dump.
- Corrected the test suite's FTP server to provide a correct size to the
'verifiedserver' request.
Daniel (27 February 2004)
- Joe Halpin made the FTP code send QUIT on the control connection before
disconnecting the TCP connection. This is what good-behaving ftp clients
should do.
Daniel (26 February 2004)
- David Byron updated several files to make curl build fine on MSVC 6. He
also added the 'buildconf.bat' that works like the 'buildconf + configure'
combo does on unixes.
- Gisle Vanem made the memdebug stuff support calloc() as well.
- Tor Arntsen pointed out that testcurl.sh needed to remove the generated
files in order to have them re-generated in each build.
- Andy Serpa found out that the share interface did not enjoy life when not
having the lock and unlock callbacks set, even though documented to be
OK. It still is OK, and now the code won't segfault anymore!
Daniel (25 February 2004)
- Based on a patch by Greg Hewgill I modified how long long is used in the
mprintf code, as we can use a 64bit type with MSVC that is a long long
equivalent. This corrects some weird large file behaviors on windows.
- Tor Arntsen helped me work out --enable-debug to work better with different
versions of the gcc and icc compilers.
- Added CURLOPT_SHARE to the curl_easy_setopt.3 man page.
Daniel (22 February 2004)
- Applied the final pieces of Gisle Vanem's patch that brings a working name
resolve timeout to the windows versions of curl!
Daniel (21 February 2004)
- David Byron's fix to allow the speed-limit logic work even if you set
limit-rate. It does work on the expense of the rate limiter.
Daniel (20 February 2004)
- configure --enable-debug with gcc now also tries to detect the icc compiler
(which somehow gets treated as if it is a gcc) to stop using all the gcc
options with it, and we also provide -isystem options for each extra -I
option the configure script has figured out (for OpenSSL, kerberos, zlib,
Heimdal etc). This of course to prevent warnings on headers we don't have
control of.
Daniel (19 February 2004)
- Doug Porter made libcurl use the HOME environment variable before the
getpwuid results when looking for .netrc files.
- If 'configure --enable-debug' is used with gcc, it now checks which gcc
version it is and uses as picky compiler options as possible for the
particular version.
- Code that can be used in both the lib and in the curl app is now made to use
the curlx_ prefix. The first function to be available like this is the
curlx_strtoll() function. This is made to allow the app to use existing code,
but without polluting the libcurl API. Further explanations posted here:
http://curl.haxx.se/mail/lib-2004-02/0215.html
Daniel (18 February 2004)
- Fixed buildconf to not use "which" as AIX and Tru64 have what have been
referred to as "horribly broken 'which' programs".
- Made sure dns cache timeout set to -1 really means caching forever.
Daniel (17 February 2004)
- Made it possibly to build c-ares with the libcurl memdebug system to better
track memory.
Daniel (16 February 2004)
- When using ares, we now initialize the ares 'channel' in curl_easy_init()
and re-use that same handle during the entire curl handle's life-time. It
improves performance.
- Fixed a problem when displaying verbose for ipv6-enabled libcurls and
re-used connections. Problem reported and fix verified by Grigory Entin.
- Jeff Lawson fixed the version-check in the SOCKS5 code.
Daniel (15 February 2004)
- Fixed a case where a host cache entry was not flagged in-use properly when a
cached entry was used.
- Andrés García's patch that checks for winmm in the configure script was
applied.
Daniel (13 February 2004)
- Ben Greear's SO_BINDTODEVICE patch for the binding of the local end to a
specific network interface.
- Greg Hewgill found out that the variable holding 'contentlength' wasn't big
enough to hold a large file!
- Tor Arntsen fixed a 64bit-related problem in date-related code in the ftp
department, and there was another potential problem in the name resolve code
too.
Daniel (11 February 2004)
- Removed a few variables that were only set but never used, as some compilers
warn about that and we do not like compiler warnings!
- Removed the need for symlinks in the tests/data directory if curl is built
outside of the source directory and the 'make test' is used. This was done
by providing a "source dir path" to the scripts/servers.
- Now, if the configure script can't find an nroff tool or an option to nroff
to use to convert man pages with, it will completely switch off the built-in
manual.
- 'configure --disable-manual' completely disables the built-in manual from
the curl command tool.
- Andrés García fixed the configure script and a minor source edit, and now
he has managed to get msys/mingw to run configure and then build!
Daniel (9 February 2004)
- The default HTTP Accept: header was modified to the much simpler
"Accept: */*".
- P R Schaffner updated the curl-ssl spec file for RPMs.
- Dominick Meglio brought lots of documentation for the share interface's man
pages that were previously missing.
- Tor Arntsen provided a patch that makes libcurl work-around a bug in the
AIX5 implementation of getaddrinfo(). This makes the FTP PORT stuff work on
ipv6-enabled AIX builds.
- Ken Rastatter provided portability fixes for the curlgtk.c example, and now
it runs on windows with GTK as well!
Daniel (6 February 2004)
- Andrés García made the configure script find gethostbyname() fine when run
with mingw on windows.
- Modified the ldap code to use proper function pointers all over (instead of
mixed data and function pointers) to work-around the picky MIPSPro compiler
warnings.
- A custom Host: header is only considered if the request is not made by
following a location. After discussions with Tim Baker.
Daniel (5 February 2004)
- The libz part of the configure script now only set the two libz-related
define HAVE_ZLIB_H and HAVE_LIBZ if both the lib and the header is found.
If one is missing, none of the defines is set.
- Andrés García fixed the Mingw makefiles.
- Len Krause reported that curl 7.9.X could do uploading from stdin without
doing chunked encoding, which current curl cannot do even if you disable
the transfer-encoding chunked header. Now it can again, and test case 98
verifies this functionality.
- Tor Arntsen fixed a weird getaddrinfo() usage in the FTP code, preventing
the ipv6-code for PORT work on AIX 5.2. We now also provide (better) error
messages when bailing out in the that function.
- Tor Arntsen now provides AIX and IRIX (using gcc, xlc and the MIPSPro
compilers) automated build logs (http://curl.haxx.se/auto/) and we've fixed
numerous minor quirks to make less warnings appear.
Daniel (4 February 2004)
- Based on a patch by Gilad, we now use the custom timeouts when waiting for a
server to connect when using FTP PORT. Previously we always waited 10
seconds, no more no less. We now also changed the default (if no timeout is
set) to wait 60 seconds for the connect before we fail.
Daniel (3 February 2004)
- Modified to link with c-ares instead of ares.
Daniel (2 February 2004)
- Added a configure test to check for which option the (g)nroff tool wants
to extract plain text from the man pages. Tor Arntsen told us the AIX
version of GNU gnroff doesn't support -man!
- Added an undef of accept in memdebug.h to make curl build with --enable-debug
on AIX 5.2 which seems to have accept defined. Reported by Tor Arntsen.
- curl_version() now includes c-ares version info, and curl_version_info() now
returns a struct with version SECOND that also includes that info.
- We are now officially using c-ares for asynch name resolves. c-ares is the
new library, based on the existing ares but with an extended and slightly
modified API.
- Dirk improved the ares timeout code, and now we also include the ares error
string when we fail to resolve a name.
- Another tweak to make test case 91 run fine. Now we have another bit on a
connection that is set true if the connection is marked for 'retry'. That
makes the connection get closed and re-opened and the HTTP-done code must
not complain on the fact that no data was received.
- Based on Dirk Manske's patch, I modified the name resolving with ares to
feature a timeout for really slow lookups. It now defaults to 300 seconds,
but is now adjusted to the CONNECTTIMEOUT/TIMOUE timeouts if one of them
is set.
- Fixed the inclusion of ca-bundle.h to really use the one in the build dir
before the one in the source dir. Domenico Andreoli found out and reported.
- Added test case 97, a simple POST with a custom Content-Type header
replacing the original application/x-www-form-urlencoded one.
Daniel (30 January 2004)
- Added code that attempts to fix the test 91 failure. As has been figured out
by Patrick Smith, the error happens because we re-use a connection that the
server is just about to close and we even manage to send away the request
without seeing an error. On the first read attempt we get a ECONNRESET.
Starting now, we attempt to detect this and if so, we retry the request on a
fresh connection.
- I added test case 510 which is a custom program that does a POST using a
read callback, with chunked transfer-encoding.
- Adjusted one of the MPE/iX changes as it made test case 504 fail all over.
- Added --socks as a recognized option. It works just like --proxy but sets a
SOCKS5 proxy to use. SOCKS5 support has been available in libcurl for a
while, just not provided by the curl tool. This does not currently work for
IPv6-enabled libcurls.
Daniel (29 January 2004)
- Stadler Stephan pointed out that src/hugehelp.c included config.h without
checking the define if its present...
- Ken Hirsch provided patches to make curl build fine on the MPE/iX operating
system.
- Dan Fandrich compiled curl with lots of aggressively pedantic compiler
options and thus found a few minor errors and did some general cleanups to
avoid them.
- Dirk Manske fixed a flaw in ares that prevented it to use non-blocking
sockets properly.
Daniel (28 January 2004)
- Richard Bramante fixed chunked transfer-encoded "uploads" to send a final
CRLF combo properly.
Daniel (27 January 2004)
- Made the response-headers during a CONNECT request to a proxy get passed on
as regular headers, so they appear with -i/-I options and similar.
- Based on a patch by Gisle Vanem, I've made the progress meter display
properly switch to a GB-display when more than 9999MB have been transfered.
Daniel (23 January 2004)
- Gisle Vanem pointed out a curlrc parser problem/crash when an option with a
required didn't have one and was on the last line of a file.
- More Windows fixes for large files. We now build and link with
../lib/strtoofft.c in the app code since Curl_strtoll() is not a provided
libcurl function... Perhaps we should consider a 'common' dir or similar
where we put source code used in both the lib and the client. Or perhaps
we'll just make this function available in the library...
- Vincent Bronner found out the socks5 code crashed when no username was
set.
- Vincent Bronner spotted a problem with proxy username/password when re-using
a persistent connection.
- Fixed the progress meter display for files larger than 2^31 bytes. Gisle
Vanem reported.
Daniel (22 January 2004)
- Gisle Vanem made strtoll() get used when curl is built with the mingw
compiler.
- Gisle Vanem fixed the compressed help text code to display properly.
- Removed the '#define HttpPost' from the public header file, as curl_httppost
is the proper name and it has been for quite some time now. Fixes another
name space pollution.
- Added 'curl_off_t' typedef in the public header file, to be used to provide
large file sizes to the *_LARGE options. Adjusted the code all over to use
this variable type instead of 'off_t'. This is an attempt to make the large
file support work on more platforms. The configure script now checks the
size of the curl_off_t instead of the plain off_t.
Version 7.11.0 (22 January 2004)
Daniel (21 January 2004)
- Removed the defines in the public header file with TIMECOND_ prefixes. They
have been obsolete since April 22nd 2002, and if this causes anyone any
problems now it is very easy to just add CURL_ to the names. This corrects
this name space pollution.
Daniel (19 January 2004)
- David Byron cleaned up how --trace with no option was treated, and also
arguments in a config file without a required parameter!
Daniel (16 January 2004)
- Gisle Vanem fixed a few issues where compilers warned about variables
possibly being used unassigned.
- Minor Interix build problem fixed.
Daniel (15 January 2004)
- Peter Sylvester pointed out some necessary escaping needed in the
acinclude.m4 file when automake 1.8 or later is used.
Daniel (14 January 2004)
- Vincent Bronner fixed the Curl_resolv() return code. This extends the fix
Steve Green provided on december 3...
Daniel (13 January 2004)
- Luke Call made the win32 version of the password prompting function support
backspace.
- Dan Fandrich fixed the hugehelp source file to contain both a compressed and
an uncompressed version in the distribution, so that more people easier can
build curl with the compressed version.
- Diego Casorran brought another AmigaOS build patch for native Amiga builds.
- Matt Veenstra updated the Mac OS X framework files.
- Brian R Duffy brought a section to the INSTALL file on how to build a
SSL-enabled curl using the free Borland C++ compiler. He also updated the
Borland lib/Makefile.b32.
- I fixed the test case 509 which I broke yesterday. Now the libtest are
compiled with an include path that points to the library's source dir, so
that the libtests can include files from the source tree. This was made to
make it possible to use the USE_SSLEAY define in the library test files.
Daniel (12 January 2004)
- Peter Sylvester brought code that now allows a callback to modified the URL
even when the multi interface is used, and then libcurl will simulate a
"follow location" to that new URL. Test 509 was added to test this feature.
- Extended the time we retry servers in the test script, and I also made it
retry the https and ftps servers before they are considered bad. I believe
the previous approach could turn problematic on really slow hosts.
Version 7.11.0-pre1 (12 January 2004)
Daniel (11 January 2004)
- Dominick Meglio pointed out FTPS should use default port 990 according to
IANA.
Daniel (8 January 2004)
- Fixed the SPNEGO configure check to not use -R or other non-portable options
in the LDFLAGS. Reported by Pierre in bug report #872930.
Daniel (5 January 2004)
- Dan Fandrich provided a fix on our zlib usage.
- David J Meyer's patch that introduce large file support to libcurl was
applied. New curl_easy_setopt options that accept 'off_t' arguments are:
INFILESIZE_LARGE
RESUME_FROM_LARGE
MAXFILESIZE_LARGE
Daniel (4 January 2004)
- Based on Dominick Meglio's comments, I made our private version of
gettimeofday() declared static. This would otherwise collide with the same
function in other libs (like ares for example).
- Added Dominick Meglio's description on how to build libcurl with ares
on win32.
Reference in New Issue View Git Blame Copy Permalink