1
0
mirror of https://github.com/moparisthebest/curl synced 2024-11-05 09:05:04 -05:00
curl/lib/select.c
Daniel Stenberg 1ad49feb71
global_init: assume the EINTR bit by default
- Removed from global_init since it isn't thread-safe. The symbol will
  still remain to not break compiles, it just won't have any effect going
  forward.

- make the internals NOT loop on EINTR (the opposite from previously).
  It only risks returning from the select/poll/wait functions early, and that
  should be risk-free.

Closes #4840
2020-01-26 18:27:18 +01:00

499 lines
14 KiB
C

/***************************************************************************
* _ _ ____ _
* Project ___| | | | _ \| |
* / __| | | | |_) | |
* | (__| |_| | _ <| |___
* \___|\___/|_| \_\_____|
*
* Copyright (C) 1998 - 2020, Daniel Stenberg, <daniel@haxx.se>, et al.
*
* This software is licensed as described in the file COPYING, which
* you should have received as part of this distribution. The terms
* are also available at https://curl.haxx.se/docs/copyright.html.
*
* You may opt to use, copy, modify, merge, publish, distribute and/or sell
* copies of the Software, and permit persons to whom the Software is
* furnished to do so, under the terms of the COPYING file.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
***************************************************************************/
#include "curl_setup.h"
#ifdef HAVE_SYS_SELECT_H
#include <sys/select.h>
#endif
#if !defined(HAVE_SELECT) && !defined(HAVE_POLL_FINE)
#error "We can't compile without select() or poll() support."
#endif
#if defined(__BEOS__) && !defined(__HAIKU__)
/* BeOS has FD_SET defined in socket.h */
#include <socket.h>
#endif
#ifdef MSDOS
#include <dos.h> /* delay() */
#endif
#ifdef __VXWORKS__
#include <strings.h> /* bzero() in FD_SET */
#endif
#include <curl/curl.h>
#include "urldata.h"
#include "connect.h"
#include "select.h"
#include "warnless.h"
/* Convenience local macros */
#define ELAPSED_MS() (int)Curl_timediff(Curl_now(), initial_tv)
/*
* Internal function used for waiting a specific amount of ms
* in Curl_socket_check() and Curl_poll() when no file descriptor
* is provided to wait on, just being used to delay execution.
* WinSock select() and poll() timeout mechanisms need a valid
* socket descriptor in a not null file descriptor set to work.
* Waiting indefinitely with this function is not allowed, a
* zero or negative timeout value will return immediately.
* Timeout resolution, accuracy, as well as maximum supported
* value is system dependent, neither factor is a citical issue
* for the intended use of this function in the library.
*
* Return values:
* -1 = system call error, invalid timeout value, or interrupted
* 0 = specified timeout has elapsed
*/
int Curl_wait_ms(int timeout_ms)
{
int r = 0;
if(!timeout_ms)
return 0;
if(timeout_ms < 0) {
SET_SOCKERRNO(EINVAL);
return -1;
}
#if defined(MSDOS)
delay(timeout_ms);
#elif defined(USE_WINSOCK)
Sleep(timeout_ms);
#else
#if defined(HAVE_POLL_FINE)
r = poll(NULL, 0, timeout_ms);
#else
{
struct timeval pending_tv;
pending_tv.tv_sec = timeout_ms / 1000;
pending_tv.tv_usec = (timeout_ms % 1000) * 1000;
r = select(0, NULL, NULL, NULL, &pending_tv);
}
#endif /* HAVE_POLL_FINE */
#endif /* USE_WINSOCK */
if(r)
r = -1;
return r;
}
/*
* Wait for read or write events on a set of file descriptors. It uses poll()
* when a fine poll() is available, in order to avoid limits with FD_SETSIZE,
* otherwise select() is used. An error is returned if select() is being used
* and a file descriptor is too large for FD_SETSIZE.
*
* A negative timeout value makes this function wait indefinitely,
* unless no valid file descriptor is given, when this happens the
* negative timeout is ignored and the function times out immediately.
*
* Return values:
* -1 = system call error or fd >= FD_SETSIZE
* 0 = timeout
* [bitmask] = action as described below
*
* CURL_CSELECT_IN - first socket is readable
* CURL_CSELECT_IN2 - second socket is readable
* CURL_CSELECT_OUT - write socket is writable
* CURL_CSELECT_ERR - an error condition occurred
*/
int Curl_socket_check(curl_socket_t readfd0, /* two sockets to read from */
curl_socket_t readfd1,
curl_socket_t writefd, /* socket to write to */
time_t timeout_ms) /* milliseconds to wait */
{
#ifdef HAVE_POLL_FINE
struct pollfd pfd[3];
int num;
#else
struct timeval pending_tv;
struct timeval *ptimeout;
fd_set fds_read;
fd_set fds_write;
fd_set fds_err;
curl_socket_t maxfd;
#endif
int pending_ms = 0;
int r;
int ret;
#if SIZEOF_TIME_T != SIZEOF_INT
/* wrap-around precaution */
if(timeout_ms >= INT_MAX)
timeout_ms = INT_MAX;
#endif
if((readfd0 == CURL_SOCKET_BAD) && (readfd1 == CURL_SOCKET_BAD) &&
(writefd == CURL_SOCKET_BAD)) {
/* no sockets, just wait */
r = Curl_wait_ms((int)timeout_ms);
return r;
}
/* Avoid initial timestamp, avoid Curl_now() call, when elapsed
time in this function does not need to be measured. This happens
when function is called with a zero timeout or a negative timeout
value indicating a blocking call should be performed. */
if(timeout_ms > 0) {
pending_ms = (int)timeout_ms;
}
#ifdef HAVE_POLL_FINE
num = 0;
if(readfd0 != CURL_SOCKET_BAD) {
pfd[num].fd = readfd0;
pfd[num].events = POLLRDNORM|POLLIN|POLLRDBAND|POLLPRI;
pfd[num].revents = 0;
num++;
}
if(readfd1 != CURL_SOCKET_BAD) {
pfd[num].fd = readfd1;
pfd[num].events = POLLRDNORM|POLLIN|POLLRDBAND|POLLPRI;
pfd[num].revents = 0;
num++;
}
if(writefd != CURL_SOCKET_BAD) {
pfd[num].fd = writefd;
pfd[num].events = POLLWRNORM|POLLOUT;
pfd[num].revents = 0;
num++;
}
if(timeout_ms < 0)
pending_ms = -1;
else if(!timeout_ms)
pending_ms = 0;
r = poll(pfd, num, pending_ms);
if(r < 0)
return -1;
if(r == 0)
return 0;
ret = 0;
num = 0;
if(readfd0 != CURL_SOCKET_BAD) {
if(pfd[num].revents & (POLLRDNORM|POLLIN|POLLERR|POLLHUP))
ret |= CURL_CSELECT_IN;
if(pfd[num].revents & (POLLRDBAND|POLLPRI|POLLNVAL))
ret |= CURL_CSELECT_ERR;
num++;
}
if(readfd1 != CURL_SOCKET_BAD) {
if(pfd[num].revents & (POLLRDNORM|POLLIN|POLLERR|POLLHUP))
ret |= CURL_CSELECT_IN2;
if(pfd[num].revents & (POLLRDBAND|POLLPRI|POLLNVAL))
ret |= CURL_CSELECT_ERR;
num++;
}
if(writefd != CURL_SOCKET_BAD) {
if(pfd[num].revents & (POLLWRNORM|POLLOUT))
ret |= CURL_CSELECT_OUT;
if(pfd[num].revents & (POLLERR|POLLHUP|POLLNVAL))
ret |= CURL_CSELECT_ERR;
}
return ret;
#else /* HAVE_POLL_FINE */
FD_ZERO(&fds_err);
maxfd = (curl_socket_t)-1;
FD_ZERO(&fds_read);
if(readfd0 != CURL_SOCKET_BAD) {
VERIFY_SOCK(readfd0);
FD_SET(readfd0, &fds_read);
FD_SET(readfd0, &fds_err);
maxfd = readfd0;
}
if(readfd1 != CURL_SOCKET_BAD) {
VERIFY_SOCK(readfd1);
FD_SET(readfd1, &fds_read);
FD_SET(readfd1, &fds_err);
if(readfd1 > maxfd)
maxfd = readfd1;
}
FD_ZERO(&fds_write);
if(writefd != CURL_SOCKET_BAD) {
VERIFY_SOCK(writefd);
FD_SET(writefd, &fds_write);
FD_SET(writefd, &fds_err);
if(writefd > maxfd)
maxfd = writefd;
}
ptimeout = (timeout_ms < 0) ? NULL : &pending_tv;
if(timeout_ms > 0) {
pending_tv.tv_sec = pending_ms / 1000;
pending_tv.tv_usec = (pending_ms % 1000) * 1000;
}
else if(!timeout_ms) {
pending_tv.tv_sec = 0;
pending_tv.tv_usec = 0;
}
/* WinSock select() must not be called with an fd_set that contains zero
fd flags, or it will return WSAEINVAL. But, it also can't be called
with no fd_sets at all! From the documentation:
Any two of the parameters, readfds, writefds, or exceptfds, can be
given as null. At least one must be non-null, and any non-null
descriptor set must contain at least one handle to a socket.
We know that we have at least one bit set in at least two fd_sets in
this case, but we may have no bits set in either fds_read or fd_write,
so check for that and handle it. Luckily, with WinSock, we can _also_
ask how many bits are set on an fd_set.
It is unclear why WinSock doesn't just handle this for us instead of
calling this an error.
Note also that WinSock ignores the first argument, so we don't worry
about the fact that maxfd is computed incorrectly with WinSock (since
curl_socket_t is unsigned in such cases and thus -1 is the largest
value).
*/
#ifdef USE_WINSOCK
r = select((int)maxfd + 1,
fds_read.fd_count ? &fds_read : NULL,
fds_write.fd_count ? &fds_write : NULL,
&fds_err, ptimeout);
#else
r = select((int)maxfd + 1, &fds_read, &fds_write, &fds_err, ptimeout);
#endif
if(r < 0)
return -1;
if(r == 0)
return 0;
ret = 0;
if(readfd0 != CURL_SOCKET_BAD) {
if(FD_ISSET(readfd0, &fds_read))
ret |= CURL_CSELECT_IN;
if(FD_ISSET(readfd0, &fds_err))
ret |= CURL_CSELECT_ERR;
}
if(readfd1 != CURL_SOCKET_BAD) {
if(FD_ISSET(readfd1, &fds_read))
ret |= CURL_CSELECT_IN2;
if(FD_ISSET(readfd1, &fds_err))
ret |= CURL_CSELECT_ERR;
}
if(writefd != CURL_SOCKET_BAD) {
if(FD_ISSET(writefd, &fds_write))
ret |= CURL_CSELECT_OUT;
if(FD_ISSET(writefd, &fds_err))
ret |= CURL_CSELECT_ERR;
}
return ret;
#endif /* HAVE_POLL_FINE */
}
/*
* This is a wrapper around poll(). If poll() does not exist, then
* select() is used instead. An error is returned if select() is
* being used and a file descriptor is too large for FD_SETSIZE.
* A negative timeout value makes this function wait indefinitely,
* unless no valid file descriptor is given, when this happens the
* negative timeout is ignored and the function times out immediately.
*
* Return values:
* -1 = system call error or fd >= FD_SETSIZE
* 0 = timeout
* N = number of structures with non zero revent fields
*/
int Curl_poll(struct pollfd ufds[], unsigned int nfds, int timeout_ms)
{
#ifndef HAVE_POLL_FINE
struct timeval pending_tv;
struct timeval *ptimeout;
fd_set fds_read;
fd_set fds_write;
fd_set fds_err;
curl_socket_t maxfd;
#endif
bool fds_none = TRUE;
unsigned int i;
int pending_ms = 0;
int r;
if(ufds) {
for(i = 0; i < nfds; i++) {
if(ufds[i].fd != CURL_SOCKET_BAD) {
fds_none = FALSE;
break;
}
}
}
if(fds_none) {
r = Curl_wait_ms(timeout_ms);
return r;
}
/* Avoid initial timestamp, avoid Curl_now() call, when elapsed
time in this function does not need to be measured. This happens
when function is called with a zero timeout or a negative timeout
value indicating a blocking call should be performed. */
if(timeout_ms > 0) {
pending_ms = timeout_ms;
}
#ifdef HAVE_POLL_FINE
if(timeout_ms < 0)
pending_ms = -1;
else if(!timeout_ms)
pending_ms = 0;
r = poll(ufds, nfds, pending_ms);
if(r < 0)
return -1;
if(r == 0)
return 0;
for(i = 0; i < nfds; i++) {
if(ufds[i].fd == CURL_SOCKET_BAD)
continue;
if(ufds[i].revents & POLLHUP)
ufds[i].revents |= POLLIN;
if(ufds[i].revents & POLLERR)
ufds[i].revents |= (POLLIN|POLLOUT);
}
#else /* HAVE_POLL_FINE */
FD_ZERO(&fds_read);
FD_ZERO(&fds_write);
FD_ZERO(&fds_err);
maxfd = (curl_socket_t)-1;
for(i = 0; i < nfds; i++) {
ufds[i].revents = 0;
if(ufds[i].fd == CURL_SOCKET_BAD)
continue;
VERIFY_SOCK(ufds[i].fd);
if(ufds[i].events & (POLLIN|POLLOUT|POLLPRI|
POLLRDNORM|POLLWRNORM|POLLRDBAND)) {
if(ufds[i].fd > maxfd)
maxfd = ufds[i].fd;
if(ufds[i].events & (POLLRDNORM|POLLIN))
FD_SET(ufds[i].fd, &fds_read);
if(ufds[i].events & (POLLWRNORM|POLLOUT))
FD_SET(ufds[i].fd, &fds_write);
if(ufds[i].events & (POLLRDBAND|POLLPRI))
FD_SET(ufds[i].fd, &fds_err);
}
}
#ifdef USE_WINSOCK
/* WinSock select() can't handle zero events. See the comment about this in
Curl_check_socket(). */
if(fds_read.fd_count == 0 && fds_write.fd_count == 0
&& fds_err.fd_count == 0) {
r = Curl_wait_ms(timeout_ms);
return r;
}
#endif
ptimeout = (timeout_ms < 0) ? NULL : &pending_tv;
if(timeout_ms > 0) {
pending_tv.tv_sec = pending_ms / 1000;
pending_tv.tv_usec = (pending_ms % 1000) * 1000;
}
else if(!timeout_ms) {
pending_tv.tv_sec = 0;
pending_tv.tv_usec = 0;
}
#ifdef USE_WINSOCK
r = select((int)maxfd + 1,
/* WinSock select() can't handle fd_sets with zero bits set, so
don't give it such arguments. See the comment about this in
Curl_check_socket().
*/
fds_read.fd_count ? &fds_read : NULL,
fds_write.fd_count ? &fds_write : NULL,
fds_err.fd_count ? &fds_err : NULL, ptimeout);
#else
r = select((int)maxfd + 1, &fds_read, &fds_write, &fds_err, ptimeout);
#endif
if(r < 0)
return -1;
if(r == 0)
return 0;
r = 0;
for(i = 0; i < nfds; i++) {
ufds[i].revents = 0;
if(ufds[i].fd == CURL_SOCKET_BAD)
continue;
if(FD_ISSET(ufds[i].fd, &fds_read))
ufds[i].revents |= POLLIN;
if(FD_ISSET(ufds[i].fd, &fds_write))
ufds[i].revents |= POLLOUT;
if(FD_ISSET(ufds[i].fd, &fds_err))
ufds[i].revents |= POLLPRI;
if(ufds[i].revents != 0)
r++;
}
#endif /* HAVE_POLL_FINE */
return r;
}
#ifdef TPF
/*
* This is a replacement for select() on the TPF platform.
* It is used whenever libcurl calls select().
* The call below to tpf_process_signals() is required because
* TPF's select calls are not signal interruptible.
*
* Return values are the same as select's.
*/
int tpf_select_libcurl(int maxfds, fd_set *reads, fd_set *writes,
fd_set *excepts, struct timeval *tv)
{
int rc;
rc = tpf_select_bsd(maxfds, reads, writes, excepts, tv);
tpf_process_signals();
return rc;
}
#endif /* TPF */