moparisthebest/curl
1
0
Fork 0
mirror of https://github.com/moparisthebest/curl synced 2024-10-31 23:55:01 -04:00
Code Issues Releases Wiki Activity
05a887ebfa
curl/tests/runtests.pl
Dan Fandrich 447c31ce9d gnutls: explicitly added SRP to the priority string 
This seems to have become necessary for SRP support to work starting
with GnuTLS ver. 2.99.0. Since support for SRP was added to GnuTLS
before the function that takes this priority string, there should be no
issue with backward compatibility.
2014-07-12 00:11:44 +02:00

5137 lines
159 KiB
Perl
Executable File
Raw Blame History

#!/usr/bin/env perl
#***************************************************************************
# _ _ ____ _
# Project ___| | | | _ \| |
# / __| | | | |_) | |
# | (__| |_| | _ <| |___
# \___|\___/|_| \_\_____|
#
# Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
#
# This software is licensed as described in the file COPYING, which
# you should have received as part of this distribution. The terms
# are also available at http://curl.haxx.se/docs/copyright.html.
#
# You may opt to use, copy, modify, merge, publish, distribute and/or sell
# copies of the Software, and permit persons to whom the Software is
# furnished to do so, under the terms of the COPYING file.
#
# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
# KIND, either express or implied.
#
###########################################################################
# Experimental hooks are available to run tests remotely on machines that
# are able to run curl but are unable to run the test harness.
# The following sections need to be modified:
#
# $HOSTIP, $HOST6IP - Set to the address of the host running the test suite
# $CLIENTIP, $CLIENT6IP - Set to the address of the host running curl
# runclient, runclientoutput - Modify to copy all the files in the log/
# directory to the system running curl, run the given command remotely
# and save the return code or returned stdout (respectively), then
# copy all the files from the remote system's log/ directory back to
# the host running the test suite. This can be done a few ways, such
# as using scp & ssh, rsync & telnet, or using a NFS shared directory
# and ssh.
#
# 'make && make test' needs to be done on both machines before making the
# above changes and running runtests.pl manually. In the shared NFS case,
# the contents of the tests/server/ directory must be from the host
# running the test suite, while the rest must be from the host running curl.
#
# Note that even with these changes a number of tests will still fail (mainly
# to do with cookies, those that set environment variables, or those that
# do more than touch the file system in a <precheck> or <postcheck>
# section). These can be added to the $TESTCASES line below,
# e.g. $TESTCASES="!8 !31 !63 !cookies..."
#
# Finally, to properly support -g and -n, checktestcmd needs to change
# to check the remote system's PATH, and the places in the code where
# the curl binary is read directly to determine its type also need to be
# fixed. As long as the -g option is never given, and the -n is always
# given, this won't be a problem.
# These should be the only variables that might be needed to get edited:
BEGIN {
push(@INC, $ENV{'srcdir'}) if(defined $ENV{'srcdir'});
push(@INC, ".");
# run time statistics needs Time::HiRes
eval {
no warnings "all";
require Time::HiRes;
import Time::HiRes qw( time );
}
}
use strict;
use warnings;
use Cwd;
# Subs imported from serverhelp module
use serverhelp qw(
serverfactors
servername_id
servername_str
servername_canon
server_pidfilename
server_logfilename
);
# Variables and subs imported from sshhelp module
use sshhelp qw(
$sshdexe
$sshexe
$sftpexe
$sshconfig
$sftpconfig
$sshdlog
$sshlog
$sftplog
$sftpcmds
display_sshdconfig
display_sshconfig
display_sftpconfig
display_sshdlog
display_sshlog
display_sftplog
exe_ext
find_sshd
find_ssh
find_sftp
find_httptlssrv
sshversioninfo
);
require "getpart.pm"; # array functions
require "valgrind.pm"; # valgrind report parser
require "ftp.pm";
my $HOSTIP="127.0.0.1"; # address on which the test server listens
my $HOST6IP="[::1]"; # address on which the test server listens
my $CLIENTIP="127.0.0.1"; # address which curl uses for incoming connections
my $CLIENT6IP="[::1]"; # address which curl uses for incoming connections
my $base = 8990; # base port number
my $HTTPPORT; # HTTP server port
my $HTTP6PORT; # HTTP IPv6 server port
my $HTTPSPORT; # HTTPS (stunnel) server port
my $FTPPORT; # FTP server port
my $FTP2PORT; # FTP server 2 port
my $FTPSPORT; # FTPS (stunnel) server port
my $FTP6PORT; # FTP IPv6 server port
my $TFTPPORT; # TFTP
my $TFTP6PORT; # TFTP
my $SSHPORT; # SCP/SFTP
my $SOCKSPORT; # SOCKS4/5 port
my $POP3PORT; # POP3
my $POP36PORT; # POP3 IPv6 server port
my $IMAPPORT; # IMAP
my $IMAP6PORT; # IMAP IPv6 server port
my $SMTPPORT; # SMTP
my $SMTP6PORT; # SMTP IPv6 server port
my $RTSPPORT; # RTSP
my $RTSP6PORT; # RTSP IPv6 server port
my $GOPHERPORT; # Gopher
my $GOPHER6PORT; # Gopher IPv6 server port
my $HTTPTLSPORT; # HTTP TLS (non-stunnel) server port
my $HTTPTLS6PORT; # HTTP TLS (non-stunnel) IPv6 server port
my $HTTPPROXYPORT; # HTTP proxy port, when using CONNECT
my $HTTPPIPEPORT; # HTTP pipelining port
my $srcdir = $ENV{'srcdir'} || '.';
my $CURL="../src/curl".exe_ext(); # what curl executable to run on the tests
my $VCURL=$CURL; # what curl binary to use to verify the servers with
# VCURL is handy to set to the system one when the one you
# just built hangs or crashes and thus prevent verification
my $DBGCURL=$CURL; #"../src/.libs/curl"; # alternative for debugging
my $LOGDIR="log";
my $TESTDIR="$srcdir/data";
my $LIBDIR="./libtest";
my $UNITDIR="./unit";
# TODO: change this to use server_inputfilename()
my $SERVERIN="$LOGDIR/server.input"; # what curl sent the server
my $SERVER2IN="$LOGDIR/server2.input"; # what curl sent the second server
my $PROXYIN="$LOGDIR/proxy.input"; # what curl sent the proxy
my $CURLLOG="$LOGDIR/curl.log"; # all command lines run
my $FTPDCMD="$LOGDIR/ftpserver.cmd"; # copy ftp server instructions here
my $SERVERLOGS_LOCK="$LOGDIR/serverlogs.lock"; # server logs advisor read lock
my $CURLCONFIG="../curl-config"; # curl-config from current build
# Normally, all test cases should be run, but at times it is handy to
# simply run a particular one:
my $TESTCASES="all";
# To run specific test cases, set them like:
# $TESTCASES="1 2 3 7 8";
#######################################################################
# No variables below this point should need to be modified
#
# invoke perl like this:
my $perl="perl -I$srcdir";
my $server_response_maxtime=13;
my $debug_build=0; # built debug enabled (--enable-debug)
my $has_memory_tracking=0; # built with memory tracking (--enable-curldebug)
my $libtool;
# name of the file that the memory debugging creates:
my $memdump="$LOGDIR/memdump";
# the path to the script that analyzes the memory debug output file:
my $memanalyze="$perl $srcdir/memanalyze.pl";
my $pwd = getcwd(); # current working directory
my $start;
my $ftpchecktime=1; # time it took to verify our test FTP server
my $stunnel = checkcmd("stunnel4") || checkcmd("tstunnel") || checkcmd("stunnel");
my $valgrind = checktestcmd("valgrind");
my $valgrind_logfile="--logfile";
my $valgrind_tool;
my $gdb = checktestcmd("gdb");
my $httptlssrv = find_httptlssrv();
my $ssl_version; # set if libcurl is built with SSL support
my $large_file; # set if libcurl is built with large file support
my $has_idn; # set if libcurl is built with IDN support
my $http_ipv6; # set if HTTP server has IPv6 support
my $ftp_ipv6; # set if FTP server has IPv6 support
my $tftp_ipv6; # set if TFTP server has IPv6 support
my $gopher_ipv6; # set if Gopher server has IPv6 support
my $has_ipv6; # set if libcurl is built with IPv6 support
my $has_libz; # set if libcurl is built with libz support
my $has_getrlimit; # set if system has getrlimit()
my $has_ntlm; # set if libcurl is built with NTLM support
my $has_ntlm_wb; # set if libcurl is built with NTLM delegation to winbind
my $has_sspi; # set if libcurl is built with SSPI support
my $has_charconv;# set if libcurl is built with CharConv support
my $has_tls_srp; # set if libcurl is built with TLS-SRP support
my $has_metalink;# set if curl is built with Metalink support
my $has_openssl; # built with a lib using an OpenSSL-like API
my $has_gnutls; # built with GnuTLS
my $has_nss; # built with NSS
my $has_yassl; # built with yassl
my $has_polarssl; # built with polarssl
my $has_axtls; # built with axTLS
my $has_winssl; # built with WinSSL (Secure Channel aka Schannel)
my $has_darwinssl;# build with DarwinSSL (Secure Transport)
my $has_shared = "unknown"; # built shared
my $resolver; # string to hold the resolver backend
my $has_cares; # if built with c-ares
my $has_threadedres; # if built with threaded resolver
my $ssllib; # name of the lib we use (for human presentation)
my $has_crypto; # set if libcurl is built with cryptographic support
my $has_textaware; # set if running on a system that has a text mode concept
# on files. Windows for example
my @protocols; # array of lowercase supported protocol servers
my $skipped=0; # number of tests skipped; reported in main loop
my %skipped; # skipped{reason}=counter, reasons for skip
my @teststat; # teststat[testnum]=reason, reasons for skip
my %disabled_keywords; # key words of tests to skip
my %enabled_keywords; # key words of tests to run
my %disabled; # disabled test cases
my $sshdid; # for socks server, ssh daemon version id
my $sshdvernum; # for socks server, ssh daemon version number
my $sshdverstr; # for socks server, ssh daemon version string
my $sshderror; # for socks server, ssh daemon version error
my $defserverlogslocktimeout = 20; # timeout to await server logs lock removal
my $defpostcommanddelay = 0; # delay between command and postcheck sections
my $timestats; # time stamping and stats generation
my $fullstats; # show time stats for every single test
my %timeprepini; # timestamp for each test preparation start
my %timesrvrini; # timestamp for each test required servers verification start
my %timesrvrend; # timestamp for each test required servers verification end
my %timetoolini; # timestamp for each test command run starting
my %timetoolend; # timestamp for each test command run stopping
my %timesrvrlog; # timestamp for each test server logs lock removal
my %timevrfyend; # timestamp for each test result verification end
my $testnumcheck; # test number, set in singletest sub.
my %oldenv;
#######################################################################
# variables that command line options may set
#
my $short;
my $automakestyle;
my $verbose;
my $debugprotocol;
my $anyway;
my $gdbthis; # run test case with gdb debugger
my $gdbxwin; # use windowed gdb when using gdb
my $keepoutfiles; # keep stdout and stderr files after tests
my $listonly; # only list the tests
my $postmortem; # display detailed info about failed tests
my $run_event_based; # run curl with --test-event to test the event API
my %run; # running server
my %doesntrun; # servers that don't work, identified by pidfile
my %serverpidfile;# all server pid file names, identified by server id
my %runcert; # cert file currently in use by an ssl running server
# torture test variables
my $torture;
my $tortnum;
my $tortalloc;
#######################################################################
# logmsg is our general message logging subroutine.
#
sub logmsg {
for(@_) {
print "$_";
}
}
# get the name of the current user
my $USER = $ENV{USER}; # Linux
if (!$USER) {
$USER = $ENV{USERNAME}; # Windows
if (!$USER) {
$USER = $ENV{LOGNAME}; # Some UNIX (I think)
}
}
# enable memory debugging if curl is compiled with it
$ENV{'CURL_MEMDEBUG'} = $memdump;
$ENV{'CURL_ENTROPY'}="12345678";
$ENV{'CURL_FORCETIME'}=1; # for debug NTLM magic
$ENV{'HOME'}=$pwd;
sub catch_zap {
my $signame = shift;
logmsg "runtests.pl received SIG$signame, exiting\n";
stopservers($verbose);
die "Somebody sent me a SIG$signame";
}
$SIG{INT} = \&catch_zap;
$SIG{TERM} = \&catch_zap;
##########################################################################
# Clear all possible '*_proxy' environment variables for various protocols
# to prevent them to interfere with our testing!
my $protocol;
foreach $protocol (('ftp', 'http', 'ftps', 'https', 'no', 'all')) {
my $proxy = "${protocol}_proxy";
# clear lowercase version
delete $ENV{$proxy} if($ENV{$proxy});
# clear uppercase version
delete $ENV{uc($proxy)} if($ENV{uc($proxy)});
}
# make sure we don't get affected by other variables that control our
# behaviour
delete $ENV{'SSL_CERT_DIR'} if($ENV{'SSL_CERT_DIR'});
delete $ENV{'SSL_CERT_PATH'} if($ENV{'SSL_CERT_PATH'});
delete $ENV{'CURL_CA_BUNDLE'} if($ENV{'CURL_CA_BUNDLE'});
#######################################################################
# Load serverpidfile hash with pidfile names for all possible servers.
#
sub init_serverpidfile_hash {
for my $proto (('ftp', 'http', 'imap', 'pop3', 'smtp', 'http')) {
for my $ssl (('', 's')) {
for my $ipvnum ((4, 6)) {
for my $idnum ((1, 2, 3)) {
my $serv = servername_id("$proto$ssl", $ipvnum, $idnum);
my $pidf = server_pidfilename("$proto$ssl", $ipvnum, $idnum);
$serverpidfile{$serv} = $pidf;
}
}
}
}
for my $proto (('tftp', 'sftp', 'socks', 'ssh', 'rtsp', 'gopher', 'httptls')) {
for my $ipvnum ((4, 6)) {
for my $idnum ((1, 2)) {
my $serv = servername_id($proto, $ipvnum, $idnum);
my $pidf = server_pidfilename($proto, $ipvnum, $idnum);
$serverpidfile{$serv} = $pidf;
}
}
}
}
#######################################################################
# Check if a given child process has just died. Reaps it if so.
#
sub checkdied {
use POSIX ":sys_wait_h";
my $pid = $_[0];
if(not defined $pid || $pid <= 0) {
return 0;
}
my $rc = waitpid($pid, &WNOHANG);
return ($rc == $pid)?1:0;
}
#######################################################################
# Start a new thread/process and run the given command line in there.
# Return the pids (yes plural) of the new child process to the parent.
#
sub startnew {
my ($cmd, $pidfile, $timeout, $fake)=@_;
logmsg "startnew: $cmd\n" if ($verbose);
my $child = fork();
my $pid2 = 0;
if(not defined $child) {
logmsg "startnew: fork() failure detected\n";
return (-1,-1);
}
if(0 == $child) {
# Here we are the child. Run the given command.
# Put an "exec" in front of the command so that the child process
# keeps this child's process ID.
exec("exec $cmd") || die "Can't exec() $cmd: $!";
# exec() should never return back here to this process. We protect
# ourselves by calling die() just in case something goes really bad.
die "error: exec() has returned";
}
# Ugly hack but ssh client and gnutls-serv don't support pid files
if ($fake) {
if(open(OUT, ">$pidfile")) {
print OUT $child . "\n";
close(OUT);
logmsg "startnew: $pidfile faked with pid=$child\n" if($verbose);
}
else {
logmsg "startnew: failed to write fake $pidfile with pid=$child\n";
}
# could/should do a while connect fails sleep a bit and loop
sleep $timeout;
if (checkdied($child)) {
logmsg "startnew: child process has failed to start\n" if($verbose);
return (-1,-1);
}
}
my $count = $timeout;
while($count--) {
if(-f $pidfile && -s $pidfile && open(PID, "<$pidfile")) {
$pid2 = 0 + <PID>;
close(PID);
if(($pid2 > 0) && pidexists($pid2)) {
# if $pid2 is valid, then make sure this pid is alive, as
# otherwise it is just likely to be the _previous_ pidfile or
# similar!
last;
}
# invalidate $pid2 if not actually alive
$pid2 = 0;
}
if (checkdied($child)) {
logmsg "startnew: child process has died, server might start up\n"
if($verbose);
# We can't just abort waiting for the server with a
# return (-1,-1);
# because the server might have forked and could still start
# up normally. Instead, just reduce the amount of time we remain
# waiting.
$count >>= 2;
}
sleep(1);
}
# Return two PIDs, the one for the child process we spawned and the one
# reported by the server itself (in case it forked again on its own).
# Both (potentially) need to be killed at the end of the test.
return ($child, $pid2);
}
#######################################################################
# Check for a command in the PATH of the test server.
#
sub checkcmd {
my ($cmd)=@_;
my @paths=(split(":", $ENV{'PATH'}), "/usr/sbin", "/usr/local/sbin",
"/sbin", "/usr/bin", "/usr/local/bin",
"./libtest/.libs", "./libtest");
for(@paths) {
if( -x "$_/$cmd" && ! -d "$_/$cmd") {
# executable bit but not a directory!
return "$_/$cmd";
}
}
}
#######################################################################
# Get the list of tests that the tests/data/Makefile.am knows about!
#
my $disttests;
sub get_disttests {
my @dist = `cd data && make show`;
$disttests = join("", @dist);
}
#######################################################################
# Check for a command in the PATH of the machine running curl.
#
sub checktestcmd {
my ($cmd)=@_;
return checkcmd($cmd);
}
#######################################################################
# Run the application under test and return its return code
#
sub runclient {
my ($cmd)=@_;
my $ret = system($cmd);
print "CMD ($ret): $cmd\n" if($verbose && !$torture);
return $ret;
# This is one way to test curl on a remote machine
# my $out = system("ssh $CLIENTIP cd \'$pwd\' \\; \'$cmd\'");
# sleep 2; # time to allow the NFS server to be updated
# return $out;
}
#######################################################################
# Run the application under test and return its stdout
#
sub runclientoutput {
my ($cmd)=@_;
return `$cmd`;
# This is one way to test curl on a remote machine
# my @out = `ssh $CLIENTIP cd \'$pwd\' \\; \'$cmd\'`;
# sleep 2; # time to allow the NFS server to be updated
# return @out;
}
#######################################################################
# Memory allocation test and failure torture testing.
#
sub torture {
my $testcmd = shift;
my $gdbline = shift;
# remove memdump first to be sure we get a new nice and clean one
unlink($memdump);
# First get URL from test server, ignore the output/result
runclient($testcmd);
logmsg " CMD: $testcmd\n" if($verbose);
# memanalyze -v is our friend, get the number of allocations made
my $count=0;
my @out = `$memanalyze -v $memdump`;
for(@out) {
if(/^Allocations: (\d+)/) {
$count = $1;
last;
}
}
if(!$count) {
logmsg " found no allocs to make fail\n";
return 0;
}
logmsg " $count allocations to make fail\n";
for ( 1 .. $count ) {
my $limit = $_;
my $fail;
my $dumped_core;
if($tortalloc && ($tortalloc != $limit)) {
next;
}
if($verbose) {
my ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) =
localtime(time());
my $now = sprintf("%02d:%02d:%02d ", $hour, $min, $sec);
logmsg "Fail alloc no: $limit at $now\r";
}
# make the memory allocation function number $limit return failure
$ENV{'CURL_MEMLIMIT'} = $limit;
# remove memdump first to be sure we get a new nice and clean one
unlink($memdump);
logmsg "*** Alloc number $limit is now set to fail ***\n" if($gdbthis);
my $ret = 0;
if($gdbthis) {
runclient($gdbline)
}
else {
$ret = runclient($testcmd);
}
#logmsg "$_ Returned " . ($ret >> 8) . "\n";
# Now clear the variable again
delete $ENV{'CURL_MEMLIMIT'} if($ENV{'CURL_MEMLIMIT'});
if(-r "core") {
# there's core file present now!
logmsg " core dumped\n";
$dumped_core = 1;
$fail = 2;
}
# verify that it returns a proper error code, doesn't leak memory
# and doesn't core dump
if(($ret & 255) || ($ret >> 8) >= 128) {
logmsg " system() returned $ret\n";
$fail=1;
}
else {
my @memdata=`$memanalyze $memdump`;
my $leak=0;
for(@memdata) {
if($_ ne "") {
# well it could be other memory problems as well, but
# we call it leak for short here
$leak=1;
}
}
if($leak) {
logmsg "** MEMORY FAILURE\n";
logmsg @memdata;
logmsg `$memanalyze -l $memdump`;
$fail = 1;
}
}
if($fail) {
logmsg " Failed on alloc number $limit in test.\n",
" invoke with \"-t$limit\" to repeat this single case.\n";
stopservers($verbose);
return 1;
}
}
logmsg "torture OK\n";
return 0;
}
#######################################################################
# Stop a test server along with pids which aren't in the %run hash yet.
# This also stops all servers which are relative to the given one.
#
sub stopserver {
my ($server, $pidlist) = @_;
#
# kill sockfilter processes for pingpong relative server
#
if($server =~ /^(ftp|imap|pop3|smtp)s?(\d*)(-ipv6|)$/) {
my $proto = $1;
my $idnum = ($2 && ($2 > 1)) ? $2 : 1;
my $ipvnum = ($3 && ($3 =~ /6$/)) ? 6 : 4;
killsockfilters($proto, $ipvnum, $idnum, $verbose);
}
#
# All servers relative to the given one must be stopped also
#
my @killservers;
if($server =~ /^(ftp|http|imap|pop3|smtp|httppipe)s((\d*)(-ipv6|))$/) {
# given a stunnel based ssl server, also kill non-ssl underlying one
push @killservers, "${1}${2}";
}
elsif($server =~ /^(ftp|http|imap|pop3|smtp|httppipe)((\d*)(-ipv6|))$/) {
# given a non-ssl server, also kill stunnel based ssl piggybacking one
push @killservers, "${1}s${2}";
}
elsif($server =~ /^(socks)((\d*)(-ipv6|))$/) {
# given a socks server, also kill ssh underlying one
push @killservers, "ssh${2}";
}
elsif($server =~ /^(ssh)((\d*)(-ipv6|))$/) {
# given a ssh server, also kill socks piggybacking one
push @killservers, "socks${2}";
}
push @killservers, $server;
#
# kill given pids and server relative ones clearing them in %run hash
#
foreach my $server (@killservers) {
if($run{$server}) {
# we must prepend a space since $pidlist may already contain a pid
$pidlist .= " $run{$server}";
$run{$server} = 0;
}
$runcert{$server} = 0 if($runcert{$server});
}
killpid($verbose, $pidlist);
#
# cleanup server pid files
#
foreach my $server (@killservers) {
my $pidfile = $serverpidfile{$server};
my $pid = processexists($pidfile);
if($pid > 0) {
logmsg "Warning: $server server unexpectedly alive\n";
killpid($verbose, $pid);
}
unlink($pidfile) if(-f $pidfile);
}
}
#######################################################################
# Verify that the server that runs on $ip, $port is our server. This also
# implies that we can speak with it, as there might be occasions when the
# server runs fine but we cannot talk to it ("Failed to connect to ::1: Can't
# assign requested address")
#
sub verifyhttp {
my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
my $server = servername_id($proto, $ipvnum, $idnum);
my $pid = 0;
my $bonus="";
my $verifyout = "$LOGDIR/".
servername_canon($proto, $ipvnum, $idnum) .'_verify.out';
unlink($verifyout) if(-f $verifyout);
my $verifylog = "$LOGDIR/".
servername_canon($proto, $ipvnum, $idnum) .'_verify.log';
unlink($verifylog) if(-f $verifylog);
if($proto eq "gopher") {
# gopher is funny
$bonus="1/";
}
my $flags = "--max-time $server_response_maxtime ";
$flags .= "--output $verifyout ";
$flags .= "--silent ";
$flags .= "--verbose ";
$flags .= "--globoff ";
$flags .= "-1 " if($has_axtls);
$flags .= "--insecure " if($proto eq 'https');
$flags .= "\"$proto://$ip:$port/${bonus}verifiedserver\"";
my $cmd = "$VCURL $flags 2>$verifylog";
# verify if our/any server is running on this port
logmsg "RUN: $cmd\n" if($verbose);
my $res = runclient($cmd);
$res >>= 8; # rotate the result
if($res & 128) {
logmsg "RUN: curl command died with a coredump\n";
return -1;
}
if($res && $verbose) {
logmsg "RUN: curl command returned $res\n";
if(open(FILE, "<$verifylog")) {
while(my $string = <FILE>) {
logmsg "RUN: $string" if($string !~ /^([ \t]*)$/);
}
close(FILE);
}
}
my $data;
if(open(FILE, "<$verifyout")) {
while(my $string = <FILE>) {
$data = $string;
last; # only want first line
}
close(FILE);
}
if($data && ($data =~ /WE ROOLZ: (\d+)/)) {
$pid = 0+$1;
}
elsif($res == 6) {
# curl: (6) Couldn't resolve host '::1'
logmsg "RUN: failed to resolve host ($proto://$ip:$port/verifiedserver)\n";
return -1;
}
elsif($data || ($res && ($res != 7))) {
logmsg "RUN: Unknown server on our $server port: $port ($res)\n";
return -1;
}
return $pid;
}
#######################################################################
# Verify that the server that runs on $ip, $port is our server. This also
# implies that we can speak with it, as there might be occasions when the
# server runs fine but we cannot talk to it ("Failed to connect to ::1: Can't
# assign requested address")
#
sub verifyftp {
my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
my $server = servername_id($proto, $ipvnum, $idnum);
my $pid = 0;
my $time=time();
my $extra="";
my $verifylog = "$LOGDIR/".
servername_canon($proto, $ipvnum, $idnum) .'_verify.log';
unlink($verifylog) if(-f $verifylog);
if($proto eq "ftps") {
$extra .= "--insecure --ftp-ssl-control ";
}
my $flags = "--max-time $server_response_maxtime ";
$flags .= "--silent ";
$flags .= "--verbose ";
$flags .= "--globoff ";
$flags .= $extra;
$flags .= "\"$proto://$ip:$port/verifiedserver\"";
my $cmd = "$VCURL $flags 2>$verifylog";
# check if this is our server running on this port:
logmsg "RUN: $cmd\n" if($verbose);
my @data = runclientoutput($cmd);
my $res = $? >> 8; # rotate the result
if($res & 128) {
logmsg "RUN: curl command died with a coredump\n";
return -1;
}
foreach my $line (@data) {
if($line =~ /WE ROOLZ: (\d+)/) {
# this is our test server with a known pid!
$pid = 0+$1;
last;
}
}
if($pid <= 0 && @data && $data[0]) {
# this is not a known server
logmsg "RUN: Unknown server on our $server port: $port\n";
return 0;
}
# we can/should use the time it took to verify the FTP server as a measure
# on how fast/slow this host/FTP is.
my $took = int(0.5+time()-$time);
if($verbose) {
logmsg "RUN: Verifying our test $server server took $took seconds\n";
}
$ftpchecktime = $took>=1?$took:1; # make sure it never is below 1
return $pid;
}
#######################################################################
# Verify that the server that runs on $ip, $port is our server. This also
# implies that we can speak with it, as there might be occasions when the
# server runs fine but we cannot talk to it ("Failed to connect to ::1: Can't
# assign requested address")
#
sub verifyrtsp {
my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
my $server = servername_id($proto, $ipvnum, $idnum);
my $pid = 0;
my $verifyout = "$LOGDIR/".
servername_canon($proto, $ipvnum, $idnum) .'_verify.out';
unlink($verifyout) if(-f $verifyout);
my $verifylog = "$LOGDIR/".
servername_canon($proto, $ipvnum, $idnum) .'_verify.log';
unlink($verifylog) if(-f $verifylog);
my $flags = "--max-time $server_response_maxtime ";
$flags .= "--output $verifyout ";
$flags .= "--silent ";
$flags .= "--verbose ";
$flags .= "--globoff ";
# currently verification is done using http
$flags .= "\"http://$ip:$port/verifiedserver\"";
my $cmd = "$VCURL $flags 2>$verifylog";
# verify if our/any server is running on this port
logmsg "RUN: $cmd\n" if($verbose);
my $res = runclient($cmd);
$res >>= 8; # rotate the result
if($res & 128) {
logmsg "RUN: curl command died with a coredump\n";
return -1;
}
if($res && $verbose) {
logmsg "RUN: curl command returned $res\n";
if(open(FILE, "<$verifylog")) {
while(my $string = <FILE>) {
logmsg "RUN: $string" if($string !~ /^([ \t]*)$/);
}
close(FILE);
}
}
my $data;
if(open(FILE, "<$verifyout")) {
while(my $string = <FILE>) {
$data = $string;
last; # only want first line
}
close(FILE);
}
if($data && ($data =~ /RTSP_SERVER WE ROOLZ: (\d+)/)) {
$pid = 0+$1;
}
elsif($res == 6) {
# curl: (6) Couldn't resolve host '::1'
logmsg "RUN: failed to resolve host ($proto://$ip:$port/verifiedserver)\n";
return -1;
}
elsif($data || ($res != 7)) {
logmsg "RUN: Unknown server on our $server port: $port\n";
return -1;
}
return $pid;
}
#######################################################################
# Verify that the ssh server has written out its pidfile, recovering
# the pid from the file and returning it if a process with that pid is
# actually alive.
#
sub verifyssh {
my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
my $server = servername_id($proto, $ipvnum, $idnum);
my $pidfile = server_pidfilename($proto, $ipvnum, $idnum);
my $pid = 0;
if(open(FILE, "<$pidfile")) {
$pid=0+<FILE>;
close(FILE);
}
if($pid > 0) {
# if we have a pid it is actually our ssh server,
# since runsshserver() unlinks previous pidfile
if(!pidexists($pid)) {
logmsg "RUN: SSH server has died after starting up\n";
checkdied($pid);
unlink($pidfile);
$pid = -1;
}
}
return $pid;
}
#######################################################################
# Verify that we can connect to the sftp server, properly authenticate
# with generated config and key files and run a simple remote pwd.
#
sub verifysftp {
my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
my $server = servername_id($proto, $ipvnum, $idnum);
my $verified = 0;
# Find out sftp client canonical file name
my $sftp = find_sftp();
if(!$sftp) {
logmsg "RUN: SFTP server cannot find $sftpexe\n";
return -1;
}
# Find out ssh client canonical file name
my $ssh = find_ssh();
if(!$ssh) {
logmsg "RUN: SFTP server cannot find $sshexe\n";
return -1;
}
# Connect to sftp server, authenticate and run a remote pwd
# command using our generated configuration and key files
my $cmd = "$sftp -b $sftpcmds -F $sftpconfig -S $ssh $ip > $sftplog 2>&1";
my $res = runclient($cmd);
# Search for pwd command response in log file
if(open(SFTPLOGFILE, "<$sftplog")) {
while(<SFTPLOGFILE>) {
if(/^Remote working directory: /) {
$verified = 1;
last;
}
}
close(SFTPLOGFILE);
}
return $verified;
}
#######################################################################
# Verify that the non-stunnel HTTP TLS extensions capable server that runs
# on $ip, $port is our server. This also implies that we can speak with it,
# as there might be occasions when the server runs fine but we cannot talk
# to it ("Failed to connect to ::1: Can't assign requested address")
#
sub verifyhttptls {
my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
my $server = servername_id($proto, $ipvnum, $idnum);
my $pidfile = server_pidfilename($proto, $ipvnum, $idnum);
my $pid = 0;
my $verifyout = "$LOGDIR/".
servername_canon($proto, $ipvnum, $idnum) .'_verify.out';
unlink($verifyout) if(-f $verifyout);
my $verifylog = "$LOGDIR/".
servername_canon($proto, $ipvnum, $idnum) .'_verify.log';
unlink($verifylog) if(-f $verifylog);
my $flags = "--max-time $server_response_maxtime ";
$flags .= "--output $verifyout ";
$flags .= "--verbose ";
$flags .= "--globoff ";
$flags .= "--insecure ";
$flags .= "--tlsauthtype SRP ";
$flags .= "--tlsuser jsmith ";
$flags .= "--tlspassword abc ";
$flags .= "\"https://$ip:$port/verifiedserver\"";
my $cmd = "$VCURL $flags 2>$verifylog";
# verify if our/any server is running on this port
logmsg "RUN: $cmd\n" if($verbose);
my $res = runclient($cmd);
$res >>= 8; # rotate the result
if($res & 128) {
logmsg "RUN: curl command died with a coredump\n";
return -1;
}
if($res && $verbose) {
logmsg "RUN: curl command returned $res\n";
if(open(FILE, "<$verifylog")) {
while(my $string = <FILE>) {
logmsg "RUN: $string" if($string !~ /^([ \t]*)$/);
}
close(FILE);
}
}
my $data;
if(open(FILE, "<$verifyout")) {
while(my $string = <FILE>) {
$data .= $string;
}
close(FILE);
}
if($data && ($data =~ /(GNUTLS|GnuTLS)/) && open(FILE, "<$pidfile")) {
$pid=0+<FILE>;
close(FILE);
if($pid > 0) {
# if we have a pid it is actually our httptls server,
# since runhttptlsserver() unlinks previous pidfile
if(!pidexists($pid)) {
logmsg "RUN: $server server has died after starting up\n";
checkdied($pid);
unlink($pidfile);
$pid = -1;
}
}
return $pid;
}
elsif($res == 6) {
# curl: (6) Couldn't resolve host '::1'
logmsg "RUN: failed to resolve host (https://$ip:$port/verifiedserver)\n";
return -1;
}
elsif($data || ($res && ($res != 7))) {
logmsg "RUN: Unknown server on our $server port: $port ($res)\n";
return -1;
}
return $pid;
}
#######################################################################
# STUB for verifying socks
#
sub verifysocks {
my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
my $server = servername_id($proto, $ipvnum, $idnum);
my $pidfile = server_pidfilename($proto, $ipvnum, $idnum);
my $pid = 0;
if(open(FILE, "<$pidfile")) {
$pid=0+<FILE>;
close(FILE);
}
if($pid > 0) {
# if we have a pid it is actually our socks server,
# since runsocksserver() unlinks previous pidfile
if(!pidexists($pid)) {
logmsg "RUN: SOCKS server has died after starting up\n";
checkdied($pid);
unlink($pidfile);
$pid = -1;
}
}
return $pid;
}
#######################################################################
# Verify that the server that runs on $ip, $port is our server.
# Retry over several seconds before giving up. The ssh server in
# particular can take a long time to start if it needs to generate
# keys on a slow or loaded host.
#
# Just for convenience, test harness uses 'https' and 'httptls' literals
# as values for 'proto' variable in order to differentiate different
# servers. 'https' literal is used for stunnel based https test servers,
# and 'httptls' is used for non-stunnel https test servers.
#
my %protofunc = ('http' => \&verifyhttp,
'https' => \&verifyhttp,
'rtsp' => \&verifyrtsp,
'ftp' => \&verifyftp,
'pop3' => \&verifyftp,
'imap' => \&verifyftp,
'smtp' => \&verifyftp,
'httppipe' => \&verifyhttp,
'ftps' => \&verifyftp,
'tftp' => \&verifyftp,
'ssh' => \&verifyssh,
'socks' => \&verifysocks,
'gopher' => \&verifyhttp,
'httptls' => \&verifyhttptls);
sub verifyserver {
my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
my $count = 30; # try for this many seconds
my $pid;
while($count--) {
my $fun = $protofunc{$proto};
$pid = &$fun($proto, $ipvnum, $idnum, $ip, $port);
if($pid > 0) {
last;
}
elsif($pid < 0) {
# a real failure, stop trying and bail out
return 0;
}
sleep(1);
}
return $pid;
}
#######################################################################
# Single shot server responsiveness test. This should only be used
# to verify that a server present in %run hash is still functional
#
sub responsiveserver {
my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
my $prev_verbose = $verbose;
$verbose = 0;
my $fun = $protofunc{$proto};
my $pid = &$fun($proto, $ipvnum, $idnum, $ip, $port);
$verbose = $prev_verbose;
if($pid > 0) {
return 1; # responsive
}
my $srvrname = servername_str($proto, $ipvnum, $idnum);
logmsg " server precheck FAILED (unresponsive $srvrname server)\n";
return 0;
}
#######################################################################
# start the http server
#
sub runhttpserver {
my ($proto, $verbose, $alt, $port) = @_;
my $ip = $HOSTIP;
my $ipvnum = 4;
my $idnum = 1;
my $server;
my $srvrname;
my $pidfile;
my $logfile;
my $flags = "";
my $exe = "$perl $srcdir/httpserver.pl";
my $verbose_flag = "--verbose ";
if($alt eq "ipv6") {
# if IPv6, use a different setup
$ipvnum = 6;
$ip = $HOST6IP;
}
elsif($alt eq "proxy") {
# basically the same, but another ID
$idnum = 2;
}
elsif($alt eq "pipe") {
# basically the same, but another ID
$idnum = 3;
$exe = "python $srcdir/http_pipe.py";
$verbose_flag .= "1 ";
}
$server = servername_id($proto, $ipvnum, $idnum);
$pidfile = $serverpidfile{$server};
# don't retry if the server doesn't work
if ($doesntrun{$pidfile}) {
return (0,0);
}
my $pid = processexists($pidfile);
if($pid > 0) {
stopserver($server, "$pid");
}
unlink($pidfile) if(-f $pidfile);
$srvrname = servername_str($proto, $ipvnum, $idnum);
$logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
$flags .= "--gopher " if($proto eq "gopher");
$flags .= "--connect $HOSTIP " if($alt eq "proxy");
$flags .= $verbose_flag if($debugprotocol);
$flags .= "--pidfile \"$pidfile\" --logfile \"$logfile\" ";
$flags .= "--id $idnum " if($idnum > 1);
$flags .= "--ipv$ipvnum --port $port --srcdir \"$srcdir\"";
my $cmd = "$exe $flags";
my ($httppid, $pid2) = startnew($cmd, $pidfile, 15, 0);
if($httppid <= 0 || !pidexists($httppid)) {
# it is NOT alive
logmsg "RUN: failed to start the $srvrname server\n";
stopserver($server, "$pid2");
displaylogs($testnumcheck);
$doesntrun{$pidfile} = 1;
return (0,0);
}
# Server is up. Verify that we can speak to it.
my $pid3 = verifyserver($proto, $ipvnum, $idnum, $ip, $port);
if(!$pid3) {
logmsg "RUN: $srvrname server failed verification\n";
# failed to talk to it properly. Kill the server and return failure
stopserver($server, "$httppid $pid2");
displaylogs($testnumcheck);
$doesntrun{$pidfile} = 1;
return (0,0);
}
$pid2 = $pid3;
if($verbose) {
logmsg "RUN: $srvrname server is now running PID $httppid\n";
}
sleep(1);
return ($httppid, $pid2);
}
#######################################################################
# start the http server
#
sub runhttp_pipeserver {
my ($proto, $verbose, $alt, $port) = @_;
my $ip = $HOSTIP;
my $ipvnum = 4;
my $idnum = 1;
my $server;
my $srvrname;
my $pidfile;
my $logfile;
my $flags = "";
if($alt eq "ipv6") {
# No IPv6
}
$server = servername_id($proto, $ipvnum, $idnum);
$pidfile = $serverpidfile{$server};
# don't retry if the server doesn't work
if ($doesntrun{$pidfile}) {
return (0,0);
}
my $pid = processexists($pidfile);
if($pid > 0) {
stopserver($server, "$pid");
}
unlink($pidfile) if(-f $pidfile);
$srvrname = servername_str($proto, $ipvnum, $idnum);
$logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
$flags .= "--verbose 1 " if($debugprotocol);
$flags .= "--pidfile \"$pidfile\" --logfile \"$logfile\" ";
$flags .= "--id $idnum " if($idnum > 1);
$flags .= "--port $port --srcdir \"$srcdir\"";
my $cmd = "$srcdir/http_pipe.py $flags";
my ($httppid, $pid2) = startnew($cmd, $pidfile, 15, 0);
if($httppid <= 0 || !pidexists($httppid)) {
# it is NOT alive
logmsg "RUN: failed to start the $srvrname server\n";
stopserver($server, "$pid2");
displaylogs($testnumcheck);
$doesntrun{$pidfile} = 1;
return (0,0);
}
# Server is up. Verify that we can speak to it.
my $pid3 = verifyserver($proto, $ipvnum, $idnum, $ip, $port);
if(!$pid3) {
logmsg "RUN: $srvrname server failed verification\n";
# failed to talk to it properly. Kill the server and return failure
stopserver($server, "$httppid $pid2");
displaylogs($testnumcheck);
$doesntrun{$pidfile} = 1;
return (0,0);
}
$pid2 = $pid3;
if($verbose) {
logmsg "RUN: $srvrname server is now running PID $httppid\n";
}
sleep(1);
return ($httppid, $pid2);
}
#######################################################################
# start the https stunnel based server
#
sub runhttpsserver {
my ($verbose, $ipv6, $certfile) = @_;
my $proto = 'https';
my $ip = ($ipv6 && ($ipv6 =~ /6$/)) ? "$HOST6IP" : "$HOSTIP";
my $ipvnum = ($ipv6 && ($ipv6 =~ /6$/)) ? 6 : 4;
my $idnum = 1;
my $server;
my $srvrname;
my $pidfile;
my $logfile;
my $flags = "";
if(!$stunnel) {
return (0,0);
}
$server = servername_id($proto, $ipvnum, $idnum);
$pidfile = $serverpidfile{$server};
# don't retry if the server doesn't work
if ($doesntrun{$pidfile}) {
return (0,0);
}
my $pid = processexists($pidfile);
if($pid > 0) {
stopserver($server, "$pid");
}
unlink($pidfile) if(-f $pidfile);
$srvrname = servername_str($proto, $ipvnum, $idnum);
$certfile = 'stunnel.pem' unless($certfile);
$logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
$flags .= "--verbose " if($debugprotocol);
$flags .= "--pidfile \"$pidfile\" --logfile \"$logfile\" ";
$flags .= "--id $idnum " if($idnum > 1);
$flags .= "--ipv$ipvnum --proto $proto ";
$flags .= "--certfile \"$certfile\" " if($certfile ne 'stunnel.pem');
$flags .= "--stunnel \"$stunnel\" --srcdir \"$srcdir\" ";
$flags .= "--connect $HTTPPORT --accept $HTTPSPORT";
my $cmd = "$perl $srcdir/secureserver.pl $flags";
my ($httpspid, $pid2) = startnew($cmd, $pidfile, 15, 0);
if($httpspid <= 0 || !pidexists($httpspid)) {
# it is NOT alive
logmsg "RUN: failed to start the $srvrname server\n";
stopserver($server, "$pid2");
displaylogs($testnumcheck);
$doesntrun{$pidfile} = 1;
return(0,0);
}
# Server is up. Verify that we can speak to it.
my $pid3 = verifyserver($proto, $ipvnum, $idnum, $ip, $HTTPSPORT);
if(!$pid3) {
logmsg "RUN: $srvrname server failed verification\n";
# failed to talk to it properly. Kill the server and return failure
stopserver($server, "$httpspid $pid2");
displaylogs($testnumcheck);
$doesntrun{$pidfile} = 1;
return (0,0);
}
# Here pid3 is actually the pid returned by the unsecure-http server.
$runcert{$server} = $certfile;
if($verbose) {
logmsg "RUN: $srvrname server is now running PID $httpspid\n";
}
sleep(1);
return ($httpspid, $pid2);
}
#######################################################################
# start the non-stunnel HTTP TLS extensions capable server
#
sub runhttptlsserver {
my ($verbose, $ipv6) = @_;
my $proto = "httptls";
my $port = ($ipv6 && ($ipv6 =~ /6$/)) ? $HTTPTLS6PORT : $HTTPTLSPORT;
my $ip = ($ipv6 && ($ipv6 =~ /6$/)) ? "$HOST6IP" : "$HOSTIP";
my $ipvnum = ($ipv6 && ($ipv6 =~ /6$/)) ? 6 : 4;
my $idnum = 1;
my $server;
my $srvrname;
my $pidfile;
my $logfile;
my $flags = "";
if(!$httptlssrv) {
return (0,0);
}
$server = servername_id($proto, $ipvnum, $idnum);
$pidfile = $serverpidfile{$server};
# don't retry if the server doesn't work
if ($doesntrun{$pidfile}) {
return (0,0);
}
my $pid = processexists($pidfile);
if($pid > 0) {
stopserver($server, "$pid");
}
unlink($pidfile) if(-f $pidfile);
$srvrname = servername_str($proto, $ipvnum, $idnum);
$logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
$flags .= "--http ";
$flags .= "--debug 1 " if($debugprotocol);
$flags .= "--port $port ";
$flags .= "--priority NORMAL:+SRP ";
$flags .= "--srppasswd $srcdir/certs/srp-verifier-db ";
$flags .= "--srppasswdconf $srcdir/certs/srp-verifier-conf";
my $cmd = "$httptlssrv $flags > $logfile 2>&1";
my ($httptlspid, $pid2) = startnew($cmd, $pidfile, 10, 1); # fake pidfile
if($httptlspid <= 0 || !pidexists($httptlspid)) {
# it is NOT alive
logmsg "RUN: failed to start the $srvrname server\n";
stopserver($server, "$pid2");
displaylogs($testnumcheck);
$doesntrun{$pidfile} = 1;
return (0,0);
}
# Server is up. Verify that we can speak to it. PID is from fake pidfile
my $pid3 = verifyserver($proto, $ipvnum, $idnum, $ip, $port);
if(!$pid3) {
logmsg "RUN: $srvrname server failed verification\n";
# failed to talk to it properly. Kill the server and return failure
stopserver($server, "$httptlspid $pid2");
displaylogs($testnumcheck);
$doesntrun{$pidfile} = 1;
return (0,0);
}
$pid2 = $pid3;
if($verbose) {
logmsg "RUN: $srvrname server is now running PID $httptlspid\n";
}
sleep(1);
return ($httptlspid, $pid2);
}
#######################################################################
# start the pingpong server (FTP, POP3, IMAP, SMTP)
#
sub runpingpongserver {
my ($proto, $id, $verbose, $ipv6) = @_;
my $port;
my $ip = ($ipv6 && ($ipv6 =~ /6$/)) ? "$HOST6IP" : "$HOSTIP";
my $ipvnum = ($ipv6 && ($ipv6 =~ /6$/)) ? 6 : 4;
my $idnum = ($id && ($id =~ /^(\d+)$/) && ($id > 1)) ? $id : 1;
my $server;
my $srvrname;
my $pidfile;
my $logfile;
my $flags = "";
if($proto eq "ftp") {
$port = ($idnum>1)?$FTP2PORT:$FTPPORT;
if($ipvnum==6) {
# if IPv6, use a different setup
$port = $FTP6PORT;
}
}
elsif($proto eq "pop3") {
$port = ($ipvnum==6) ? $POP36PORT : $POP3PORT;
}
elsif($proto eq "imap") {
$port = ($ipvnum==6) ? $IMAP6PORT : $IMAPPORT;
}
elsif($proto eq "smtp") {
$port = ($ipvnum==6) ? $SMTP6PORT : $SMTPPORT;
}
else {
print STDERR "Unsupported protocol $proto!!\n";
return 0;
}
$server = servername_id($proto, $ipvnum, $idnum);
$pidfile = $serverpidfile{$server};
# don't retry if the server doesn't work
if ($doesntrun{$pidfile}) {
return (0,0);
}
my $pid = processexists($pidfile);
if($pid > 0) {
stopserver($server, "$pid");
}
unlink($pidfile) if(-f $pidfile);
$srvrname = servername_str($proto, $ipvnum, $idnum);
$logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
$flags .= "--verbose " if($debugprotocol);
$flags .= "--pidfile \"$pidfile\" --logfile \"$logfile\" ";
$flags .= "--srcdir \"$srcdir\" --proto $proto ";
$flags .= "--id $idnum " if($idnum > 1);
$flags .= "--ipv$ipvnum --port $port --addr \"$ip\"";
my $cmd = "$perl $srcdir/ftpserver.pl $flags";
my ($ftppid, $pid2) = startnew($cmd, $pidfile, 15, 0);
if($ftppid <= 0 || !pidexists($ftppid)) {
# it is NOT alive
logmsg "RUN: failed to start the $srvrname server\n";
stopserver($server, "$pid2");
displaylogs($testnumcheck);
$doesntrun{$pidfile} = 1;
return (0,0);
}
# Server is up. Verify that we can speak to it.
my $pid3 = verifyserver($proto, $ipvnum, $idnum, $ip, $port);
if(!$pid3) {
logmsg "RUN: $srvrname server failed verification\n";
# failed to talk to it properly. Kill the server and return failure
stopserver($server, "$ftppid $pid2");
displaylogs($testnumcheck);
$doesntrun{$pidfile} = 1;
return (0,0);
}
$pid2 = $pid3;
if($verbose) {
logmsg "RUN: $srvrname server is now running PID $ftppid\n";
}
sleep(1);
return ($pid2, $ftppid);
}
#######################################################################
# start the ftps server (or rather, tunnel)
#
sub runftpsserver {
my ($verbose, $ipv6, $certfile) = @_;
my $proto = 'ftps';
my $ip = ($ipv6 && ($ipv6 =~ /6$/)) ? "$HOST6IP" : "$HOSTIP";
my $ipvnum = ($ipv6 && ($ipv6 =~ /6$/)) ? 6 : 4;
my $idnum = 1;
my $server;
my $srvrname;
my $pidfile;
my $logfile;
my $flags = "";
if(!$stunnel) {
return (0,0);
}
$server = servername_id($proto, $ipvnum, $idnum);
$pidfile = $serverpidfile{$server};
# don't retry if the server doesn't work
if ($doesntrun{$pidfile}) {
return (0,0);
}
my $pid = processexists($pidfile);
if($pid > 0) {
stopserver($server, "$pid");
}
unlink($pidfile) if(-f $pidfile);
$srvrname = servername_str($proto, $ipvnum, $idnum);
$certfile = 'stunnel.pem' unless($certfile);
$logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
$flags .= "--verbose " if($debugprotocol);
$flags .= "--pidfile \"$pidfile\" --logfile \"$logfile\" ";
$flags .= "--id $idnum " if($idnum > 1);
$flags .= "--ipv$ipvnum --proto $proto ";
$flags .= "--certfile \"$certfile\" " if($certfile ne 'stunnel.pem');
$flags .= "--stunnel \"$stunnel\" --srcdir \"$srcdir\" ";
$flags .= "--connect $FTPPORT --accept $FTPSPORT";
my $cmd = "$perl $srcdir/secureserver.pl $flags";
my ($ftpspid, $pid2) = startnew($cmd, $pidfile, 15, 0);
if($ftpspid <= 0 || !pidexists($ftpspid)) {
# it is NOT alive
logmsg "RUN: failed to start the $srvrname server\n";
stopserver($server, "$pid2");
displaylogs($testnumcheck);
$doesntrun{$pidfile} = 1;
return(0,0);
}
# Server is up. Verify that we can speak to it.
my $pid3 = verifyserver($proto, $ipvnum, $idnum, $ip, $FTPSPORT);
if(!$pid3) {
logmsg "RUN: $srvrname server failed verification\n";
# failed to talk to it properly. Kill the server and return failure
stopserver($server, "$ftpspid $pid2");
displaylogs($testnumcheck);
$doesntrun{$pidfile} = 1;
return (0,0);
}
# Here pid3 is actually the pid returned by the unsecure-ftp server.
$runcert{$server} = $certfile;
if($verbose) {
logmsg "RUN: $srvrname server is now running PID $ftpspid\n";
}
sleep(1);
return ($ftpspid, $pid2);
}
#######################################################################
# start the tftp server
#
sub runtftpserver {
my ($id, $verbose, $ipv6) = @_;
my $port = $TFTPPORT;
my $ip = $HOSTIP;
my $proto = 'tftp';
my $ipvnum = 4;
my $idnum = ($id && ($id =~ /^(\d+)$/) && ($id > 1)) ? $id : 1;
my $server;
my $srvrname;
my $pidfile;
my $logfile;
my $flags = "";
if($ipv6) {
# if IPv6, use a different setup
$ipvnum = 6;
$port = $TFTP6PORT;
$ip = $HOST6IP;
}
$server = servername_id($proto, $ipvnum, $idnum);
$pidfile = $serverpidfile{$server};
# don't retry if the server doesn't work
if ($doesntrun{$pidfile}) {
return (0,0);
}
my $pid = processexists($pidfile);
if($pid > 0) {
stopserver($server, "$pid");
}
unlink($pidfile) if(-f $pidfile);
$srvrname = servername_str($proto, $ipvnum, $idnum);
$logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
$flags .= "--verbose " if($debugprotocol);
$flags .= "--pidfile \"$pidfile\" --logfile \"$logfile\" ";
$flags .= "--id $idnum " if($idnum > 1);
$flags .= "--ipv$ipvnum --port $port --srcdir \"$srcdir\"";
my $cmd = "$perl $srcdir/tftpserver.pl $flags";
my ($tftppid, $pid2) = startnew($cmd, $pidfile, 15, 0);
if($tftppid <= 0 || !pidexists($tftppid)) {
# it is NOT alive
logmsg "RUN: failed to start the $srvrname server\n";
stopserver($server, "$pid2");
displaylogs($testnumcheck);
$doesntrun{$pidfile} = 1;
return (0,0);
}
# Server is up. Verify that we can speak to it.
my $pid3 = verifyserver($proto, $ipvnum, $idnum, $ip, $port);
if(!$pid3) {
logmsg "RUN: $srvrname server failed verification\n";
# failed to talk to it properly. Kill the server and return failure
stopserver($server, "$tftppid $pid2");
displaylogs($testnumcheck);
$doesntrun{$pidfile} = 1;
return (0,0);
}
$pid2 = $pid3;
if($verbose) {
logmsg "RUN: $srvrname server is now running PID $tftppid\n";
}
sleep(1);
return ($pid2, $tftppid);
}
#######################################################################
# start the rtsp server
#
sub runrtspserver {
my ($verbose, $ipv6) = @_;
my $port = $RTSPPORT;
my $ip = $HOSTIP;
my $proto = 'rtsp';
my $ipvnum = 4;
my $idnum = 1;
my $server;
my $srvrname;
my $pidfile;
my $logfile;
my $flags = "";
if($ipv6) {
# if IPv6, use a different setup
$ipvnum = 6;
$port = $RTSP6PORT;
$ip = $HOST6IP;
}
$server = servername_id($proto, $ipvnum, $idnum);
$pidfile = $serverpidfile{$server};
# don't retry if the server doesn't work
if ($doesntrun{$pidfile}) {
return (0,0);
}
my $pid = processexists($pidfile);
if($pid > 0) {
stopserver($server, "$pid");
}
unlink($pidfile) if(-f $pidfile);
$srvrname = servername_str($proto, $ipvnum, $idnum);
$logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
$flags .= "--verbose " if($debugprotocol);
$flags .= "--pidfile \"$pidfile\" --logfile \"$logfile\" ";
$flags .= "--id $idnum " if($idnum > 1);
$flags .= "--ipv$ipvnum --port $port --srcdir \"$srcdir\"";
my $cmd = "$perl $srcdir/rtspserver.pl $flags";
my ($rtsppid, $pid2) = startnew($cmd, $pidfile, 15, 0);
if($rtsppid <= 0 || !pidexists($rtsppid)) {
# it is NOT alive
logmsg "RUN: failed to start the $srvrname server\n";
stopserver($server, "$pid2");
displaylogs($testnumcheck);
$doesntrun{$pidfile} = 1;
return (0,0);
}
# Server is up. Verify that we can speak to it.
my $pid3 = verifyserver($proto, $ipvnum, $idnum, $ip, $port);
if(!$pid3) {
logmsg "RUN: $srvrname server failed verification\n";
# failed to talk to it properly. Kill the server and return failure
stopserver($server, "$rtsppid $pid2");
displaylogs($testnumcheck);
$doesntrun{$pidfile} = 1;
return (0,0);
}
$pid2 = $pid3;
if($verbose) {
logmsg "RUN: $srvrname server is now running PID $rtsppid\n";
}
sleep(1);
return ($rtsppid, $pid2);
}
#######################################################################
# Start the ssh (scp/sftp) server
#
sub runsshserver {
my ($id, $verbose, $ipv6) = @_;
my $ip=$HOSTIP;
my $port = $SSHPORT;
my $socksport = $SOCKSPORT;
my $proto = 'ssh';
my $ipvnum = 4;
my $idnum = ($id && ($id =~ /^(\d+)$/) && ($id > 1)) ? $id : 1;
my $server;
my $srvrname;
my $pidfile;
my $logfile;
my $flags = "";
$server = servername_id($proto, $ipvnum, $idnum);
$pidfile = $serverpidfile{$server};
# don't retry if the server doesn't work
if ($doesntrun{$pidfile}) {
return (0,0);
}
my $pid = processexists($pidfile);
if($pid > 0) {
stopserver($server, "$pid");
}
unlink($pidfile) if(-f $pidfile);
$srvrname = servername_str($proto, $ipvnum, $idnum);
$logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
$flags .= "--verbose " if($verbose);
$flags .= "--debugprotocol " if($debugprotocol);
$flags .= "--pidfile \"$pidfile\" ";
$flags .= "--id $idnum " if($idnum > 1);
$flags .= "--ipv$ipvnum --addr \"$ip\" ";
$flags .= "--sshport $port --socksport $socksport ";
$flags .= "--user \"$USER\"";
my $cmd = "$perl $srcdir/sshserver.pl $flags";
my ($sshpid, $pid2) = startnew($cmd, $pidfile, 60, 0);
# on loaded systems sshserver start up can take longer than the timeout
# passed to startnew, when this happens startnew completes without being
# able to read the pidfile and consequently returns a zero pid2 above.
if($sshpid <= 0 || !pidexists($sshpid)) {
# it is NOT alive
logmsg "RUN: failed to start the $srvrname server\n";
stopserver($server, "$pid2");
$doesntrun{$pidfile} = 1;
return (0,0);
}
# ssh server verification allows some extra time for the server to start up
# and gives us the opportunity of recovering the pid from the pidfile, when
# this verification succeeds the recovered pid is assigned to pid2.
my $pid3 = verifyserver($proto, $ipvnum, $idnum, $ip, $port);
if(!$pid3) {
logmsg "RUN: $srvrname server failed verification\n";
# failed to fetch server pid. Kill the server and return failure
stopserver($server, "$sshpid $pid2");
$doesntrun{$pidfile} = 1;
return (0,0);
}
$pid2 = $pid3;
# once it is known that the ssh server is alive, sftp server verification
# is performed actually connecting to it, authenticating and performing a
# very simple remote command. This verification is tried only one time.
$sshdlog = server_logfilename($LOGDIR, 'ssh', $ipvnum, $idnum);
$sftplog = server_logfilename($LOGDIR, 'sftp', $ipvnum, $idnum);
if(verifysftp('sftp', $ipvnum, $idnum, $ip, $port) < 1) {
logmsg "RUN: SFTP server failed verification\n";
# failed to talk to it properly. Kill the server and return failure
display_sftplog();
display_sftpconfig();
display_sshdlog();
display_sshdconfig();
stopserver($server, "$sshpid $pid2");
$doesntrun{$pidfile} = 1;
return (0,0);
}
if($verbose) {
logmsg "RUN: $srvrname server is now running PID $pid2\n";
}
return ($pid2, $sshpid);
}
#######################################################################
# Start the socks server
#
sub runsocksserver {
my ($id, $verbose, $ipv6) = @_;
my $ip=$HOSTIP;
my $port = $SOCKSPORT;
my $proto = 'socks';
my $ipvnum = 4;
my $idnum = ($id && ($id =~ /^(\d+)$/) && ($id > 1)) ? $id : 1;
my $server;
my $srvrname;
my $pidfile;
my $logfile;
my $flags = "";
$server = servername_id($proto, $ipvnum, $idnum);
$pidfile = $serverpidfile{$server};
# don't retry if the server doesn't work
if ($doesntrun{$pidfile}) {
return (0,0);
}
my $pid = processexists($pidfile);
if($pid > 0) {
stopserver($server, "$pid");
}
unlink($pidfile) if(-f $pidfile);
$srvrname = servername_str($proto, $ipvnum, $idnum);
$logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
# The ssh server must be already running
if(!$run{'ssh'}) {
logmsg "RUN: SOCKS server cannot find running SSH server\n";
$doesntrun{$pidfile} = 1;
return (0,0);
}
# Find out ssh daemon canonical file name
my $sshd = find_sshd();
if(!$sshd) {
logmsg "RUN: SOCKS server cannot find $sshdexe\n";
$doesntrun{$pidfile} = 1;
return (0,0);
}
# Find out ssh daemon version info
($sshdid, $sshdvernum, $sshdverstr, $sshderror) = sshversioninfo($sshd);
if(!$sshdid) {
# Not an OpenSSH or SunSSH ssh daemon
logmsg "$sshderror\n" if($verbose);
logmsg "SCP, SFTP and SOCKS tests require OpenSSH 2.9.9 or later\n";
$doesntrun{$pidfile} = 1;
return (0,0);
}
logmsg "ssh server found $sshd is $sshdverstr\n" if($verbose);
# Find out ssh client canonical file name
my $ssh = find_ssh();
if(!$ssh) {
logmsg "RUN: SOCKS server cannot find $sshexe\n";
$doesntrun{$pidfile} = 1;
return (0,0);
}
# Find out ssh client version info
my ($sshid, $sshvernum, $sshverstr, $ssherror) = sshversioninfo($ssh);
if(!$sshid) {
# Not an OpenSSH or SunSSH ssh client
logmsg "$ssherror\n" if($verbose);
logmsg "SCP, SFTP and SOCKS tests require OpenSSH 2.9.9 or later\n";
$doesntrun{$pidfile} = 1;
return (0,0);
}
# Verify minimum ssh client version
if((($sshid =~ /OpenSSH/) && ($sshvernum < 299)) ||
(($sshid =~ /SunSSH/) && ($sshvernum < 100))) {
logmsg "ssh client found $ssh is $sshverstr\n";
logmsg "SCP, SFTP and SOCKS tests require OpenSSH 2.9.9 or later\n";
$doesntrun{$pidfile} = 1;
return (0,0);
}
logmsg "ssh client found $ssh is $sshverstr\n" if($verbose);
# Verify if ssh client and ssh daemon versions match
if(($sshdid ne $sshid) || ($sshdvernum != $sshvernum)) {
# Our test harness might work with slightly mismatched versions
logmsg "Warning: version mismatch: sshd $sshdverstr - ssh $sshverstr\n"
if($verbose);
}
# Config file options for ssh client are previously set from sshserver.pl
if(! -e $sshconfig) {
logmsg "RUN: SOCKS server cannot find $sshconfig\n";
$doesntrun{$pidfile} = 1;
return (0,0);
}
$sshlog = server_logfilename($LOGDIR, 'socks', $ipvnum, $idnum);
# start our socks server
my $cmd="$ssh -N -F $sshconfig $ip > $sshlog 2>&1";
my ($sshpid, $pid2) = startnew($cmd, $pidfile, 30, 1); # fake pidfile
if($sshpid <= 0 || !pidexists($sshpid)) {
# it is NOT alive
logmsg "RUN: failed to start the $srvrname server\n";
display_sshlog();
display_sshconfig();
display_sshdlog();
display_sshdconfig();
stopserver($server, "$pid2");
$doesntrun{$pidfile} = 1;
return (0,0);
}
# Ugly hack but ssh doesn't support pid files. PID is from fake pidfile.
my $pid3 = verifyserver($proto, $ipvnum, $idnum, $ip, $port);
if(!$pid3) {
logmsg "RUN: $srvrname server failed verification\n";
# failed to talk to it properly. Kill the server and return failure
stopserver($server, "$sshpid $pid2");
$doesntrun{$pidfile} = 1;
return (0,0);
}
$pid2 = $pid3;
if($verbose) {
logmsg "RUN: $srvrname server is now running PID $pid2\n";
}
return ($pid2, $sshpid);
}
#######################################################################
# Single shot http and gopher server responsiveness test. This should only
# be used to verify that a server present in %run hash is still functional
#
sub responsive_http_server {
my ($proto, $verbose, $alt, $port) = @_;
my $ip = $HOSTIP;
my $ipvnum = 4;
my $idnum = 1;
if($alt eq "ipv6") {
# if IPv6, use a different setup
$ipvnum = 6;
$ip = $HOST6IP;
}
elsif($alt eq "proxy") {
$idnum = 2;
}
return &responsiveserver($proto, $ipvnum, $idnum, $ip, $port);
}
#######################################################################
# Single shot pingpong server responsiveness test. This should only be
# used to verify that a server present in %run hash is still functional
#
sub responsive_pingpong_server {
my ($proto, $id, $verbose, $ipv6) = @_;
my $port;
my $ip = ($ipv6 && ($ipv6 =~ /6$/)) ? "$HOST6IP" : "$HOSTIP";
my $ipvnum = ($ipv6 && ($ipv6 =~ /6$/)) ? 6 : 4;
my $idnum = ($id && ($id =~ /^(\d+)$/) && ($id > 1)) ? $id : 1;
if($proto eq "ftp") {
$port = ($idnum>1)?$FTP2PORT:$FTPPORT;
if($ipvnum==6) {
# if IPv6, use a different setup
$port = $FTP6PORT;
}
}
elsif($proto eq "pop3") {
$port = ($ipvnum==6) ? $POP36PORT : $POP3PORT;
}
elsif($proto eq "imap") {
$port = ($ipvnum==6) ? $IMAP6PORT : $IMAPPORT;
}
elsif($proto eq "smtp") {
$port = ($ipvnum==6) ? $SMTP6PORT : $SMTPPORT;
}
else {
print STDERR "Unsupported protocol $proto!!\n";
return 0;
}
return &responsiveserver($proto, $ipvnum, $idnum, $ip, $port);
}
#######################################################################
# Single shot rtsp server responsiveness test. This should only be
# used to verify that a server present in %run hash is still functional
#
sub responsive_rtsp_server {
my ($verbose, $ipv6) = @_;
my $port = $RTSPPORT;
my $ip = $HOSTIP;
my $proto = 'rtsp';
my $ipvnum = 4;
my $idnum = 1;
if($ipv6) {
# if IPv6, use a different setup
$ipvnum = 6;
$port = $RTSP6PORT;
$ip = $HOST6IP;
}
return &responsiveserver($proto, $ipvnum, $idnum, $ip, $port);
}
#######################################################################
# Single shot tftp server responsiveness test. This should only be
# used to verify that a server present in %run hash is still functional
#
sub responsive_tftp_server {
my ($id, $verbose, $ipv6) = @_;
my $port = $TFTPPORT;
my $ip = $HOSTIP;
my $proto = 'tftp';
my $ipvnum = 4;
my $idnum = ($id && ($id =~ /^(\d+)$/) && ($id > 1)) ? $id : 1;
if($ipv6) {
# if IPv6, use a different setup
$ipvnum = 6;
$port = $TFTP6PORT;
$ip = $HOST6IP;
}
return &responsiveserver($proto, $ipvnum, $idnum, $ip, $port);
}
#######################################################################
# Single shot non-stunnel HTTP TLS extensions capable server
# responsiveness test. This should only be used to verify that a
# server present in %run hash is still functional
#
sub responsive_httptls_server {
my ($verbose, $ipv6) = @_;
my $proto = "httptls";
my $port = ($ipv6 && ($ipv6 =~ /6$/)) ? $HTTPTLS6PORT : $HTTPTLSPORT;
my $ip = ($ipv6 && ($ipv6 =~ /6$/)) ? "$HOST6IP" : "$HOSTIP";
my $ipvnum = ($ipv6 && ($ipv6 =~ /6$/)) ? 6 : 4;
my $idnum = 1;
return &responsiveserver($proto, $ipvnum, $idnum, $ip, $port);
}
#######################################################################
# Remove all files in the specified directory
#
sub cleardir {
my $dir = $_[0];
my $count;
my $file;
# Get all files
opendir(DIR, $dir) ||
return 0; # can't open dir
while($file = readdir(DIR)) {
if($file !~ /^\./) {
unlink("$dir/$file");
$count++;
}
}
closedir DIR;
return $count;
}
#######################################################################
# filter out the specified pattern from the given input file and store the
# results in the given output file
#
sub filteroff {
my $infile=$_[0];
my $filter=$_[1];
my $ofile=$_[2];
open(IN, "<$infile")
|| return 1;
open(OUT, ">$ofile")
|| return 1;
# logmsg "FILTER: off $filter from $infile to $ofile\n";
while(<IN>) {
$_ =~ s/$filter//;
print OUT $_;
}
close(IN);
close(OUT);
return 0;
}
#######################################################################
# compare test results with the expected output, we might filter off
# some pattern that is allowed to differ, output test results
#
sub compare {
# filter off patterns _before_ this comparison!
my ($testnum, $testname, $subject, $firstref, $secondref)=@_;
my $result = compareparts($firstref, $secondref);
if($result) {
# timestamp test result verification end
$timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
if(!$short) {
logmsg "\n $testnum: $subject FAILED:\n";
logmsg showdiff($LOGDIR, $firstref, $secondref);
}
elsif(!$automakestyle) {
logmsg "FAILED\n";
}
else {
# automakestyle
logmsg "FAIL: $testnum - $testname - $subject\n";
}
}
return $result;
}
#######################################################################
# display information about curl and the host the test suite runs on
#
sub checksystem {
unlink($memdump); # remove this if there was one left
my $feat;
my $curl;
my $libcurl;
my $versretval;
my $versnoexec;
my @version=();
my $curlverout="$LOGDIR/curlverout.log";
my $curlvererr="$LOGDIR/curlvererr.log";
my $versioncmd="$CURL --version 1>$curlverout 2>$curlvererr";
unlink($curlverout);
unlink($curlvererr);
$versretval = runclient($versioncmd);
$versnoexec = $!;
open(VERSOUT, "<$curlverout");
@version = <VERSOUT>;
close(VERSOUT);
$resolver="stock";
for(@version) {
chomp;
if($_ =~ /^curl/) {
$curl = $_;
$curl =~ s/^(.*)(libcurl.*)/$1/g;
$libcurl = $2;
if($curl =~ /mingw32/) {
# This is a windows minw32 build, we need to translate the
# given path to the "actual" windows path. The MSYS shell
# has a builtin 'pwd -W' command which converts the path.
$pwd = `sh -c "echo \$(pwd -W)"`;
chomp($pwd);
}
elsif ($curl =~ /win32/) {
# Native Windows builds don't understand the
# output of cygwin's pwd. It will be
# something like /cygdrive/c/<some path>.
#
# Use the cygpath utility to convert the
# working directory to a Windows friendly
# path. The -m option converts to use drive
# letter:, but it uses / instead \. Forward
# slashes (/) are easier for us. We don't
# have to escape them to get them to curl
# through a shell.
chomp($pwd = `cygpath -m $pwd`);
}
if ($libcurl =~ /winssl/i) {
$has_winssl=1;
$ssllib="WinSSL";
}
elsif ($libcurl =~ /openssl/i) {
$has_openssl=1;
$ssllib="OpenSSL";
}
elsif ($libcurl =~ /gnutls/i) {
$has_gnutls=1;
$ssllib="GnuTLS";
}
elsif ($libcurl =~ /nss/i) {
$has_nss=1;
$ssllib="NSS";
}
elsif ($libcurl =~ /yassl/i) {
$has_yassl=1;
$ssllib="yassl";
}
elsif ($libcurl =~ /polarssl/i) {
$has_polarssl=1;
$ssllib="polarssl";
}
elsif ($libcurl =~ /axtls/i) {
$has_axtls=1;
$ssllib="axTLS";
}
elsif ($libcurl =~ /securetransport/i) {
$has_darwinssl=1;
$ssllib="DarwinSSL";
}
if ($libcurl =~ /ares/i) {
$has_cares=1;
$resolver="c-ares";
}
}
elsif($_ =~ /^Protocols: (.*)/i) {
# these are the protocols compiled in to this libcurl
@protocols = split(' ', lc($1));
# Generate a "proto-ipv6" version of each protocol to match the
# IPv6 <server> name. This works even if IPv6 support isn't
# compiled in because the <features> test will fail.
push @protocols, map($_ . '-ipv6', @protocols);
# 'http-proxy' is used in test cases to do CONNECT through
push @protocols, 'http-proxy';
# 'http-pipe' is the special server for testing pipelining
push @protocols, 'http-pipe';
# 'none' is used in test cases to mean no server
push @protocols, 'none';
}
elsif($_ =~ /^Features: (.*)/i) {
$feat = $1;
if($feat =~ /TrackMemory/i) {
# built with memory tracking support (--enable-curldebug)
$has_memory_tracking = 1;
}
if($feat =~ /debug/i) {
# curl was built with --enable-debug
$debug_build = 1;
}
if($feat =~ /SSL/i) {
# ssl enabled
$ssl_version=1;
}
if($feat =~ /Largefile/i) {
# large file support
$large_file=1;
}
if($feat =~ /IDN/i) {
# IDN support
$has_idn=1;
}
if($feat =~ /IPv6/i) {
$has_ipv6 = 1;
}
if($feat =~ /libz/i) {
$has_libz = 1;
}
if($feat =~ /NTLM/i) {
# NTLM enabled
$has_ntlm=1;
# Use this as a proxy for any cryptographic authentication
$has_crypto=1;
}
if($feat =~ /NTLM_WB/i) {
# NTLM delegation to winbind daemon ntlm_auth helper enabled
$has_ntlm_wb=1;
}
if($feat =~ /SSPI/i) {
# SSPI enabled
$has_sspi=1;
}
if($feat =~ /CharConv/i) {
# CharConv enabled
$has_charconv=1;
}
if($feat =~ /TLS-SRP/i) {
# TLS-SRP enabled
$has_tls_srp=1;
}
if($feat =~ /Metalink/i) {
# Metalink enabled
$has_metalink=1;
}
if($feat =~ /AsynchDNS/i) {
if(!$has_cares) {
# this means threaded resolver
$has_threadedres=1;
$resolver="threaded";
}
}
}
#
# Test harness currently uses a non-stunnel server in order to
# run HTTP TLS-SRP tests required when curl is built with https
# protocol support and TLS-SRP feature enabled. For convenience
# 'httptls' may be included in the test harness protocols array
# to differentiate this from classic stunnel based 'https' test
# harness server.
#
if($has_tls_srp) {
my $add_httptls;
for(@protocols) {
if($_ =~ /^https(-ipv6|)$/) {
$add_httptls=1;
last;
}
}
if($add_httptls && (! grep /^httptls$/, @protocols)) {
push @protocols, 'httptls';
push @protocols, 'httptls-ipv6';
}
}
}
if(!$curl) {
logmsg "unable to get curl's version, further details are:\n";
logmsg "issued command: \n";
logmsg "$versioncmd \n";
if ($versretval == -1) {
logmsg "command failed with: \n";
logmsg "$versnoexec \n";
}
elsif ($versretval & 127) {
logmsg sprintf("command died with signal %d, and %s coredump.\n",
($versretval & 127), ($versretval & 128)?"a":"no");
}
else {
logmsg sprintf("command exited with value %d \n", $versretval >> 8);
}
logmsg "contents of $curlverout: \n";
displaylogcontent("$curlverout");
logmsg "contents of $curlvererr: \n";
displaylogcontent("$curlvererr");
die "couldn't get curl's version";
}
if(-r "../lib/curl_config.h") {
open(CONF, "<../lib/curl_config.h");
while(<CONF>) {
if($_ =~ /^\#define HAVE_GETRLIMIT/) {
$has_getrlimit = 1;
}
}
close(CONF);
}
if($has_ipv6) {
# client has ipv6 support
# check if the HTTP server has it!
my @sws = `server/sws --version`;
if($sws[0] =~ /IPv6/) {
# HTTP server has ipv6 support!
$http_ipv6 = 1;
$gopher_ipv6 = 1;
}
# check if the FTP server has it!
@sws = `server/sockfilt --version`;
if($sws[0] =~ /IPv6/) {
# FTP server has ipv6 support!
$ftp_ipv6 = 1;
}
}
if(!$has_memory_tracking && $torture) {
die "can't run torture tests since curl was built without ".
"TrackMemory feature (--enable-curldebug)";
}
$has_shared = `sh $CURLCONFIG --built-shared`;
chomp $has_shared;
my $hostname=join(' ', runclientoutput("hostname"));
my $hosttype=join(' ', runclientoutput("uname -a"));
logmsg ("********* System characteristics ******** \n",
"* $curl\n",
"* $libcurl\n",
"* Features: $feat\n",
"* Host: $hostname",
"* System: $hosttype");
if($has_memory_tracking && $has_threadedres) {
$has_memory_tracking = 0;
logmsg("*\n",
"*** DISABLES memory tracking when using threaded resolver\n",
"*\n");
}
logmsg sprintf("* Server SSL: %8s", $stunnel?"ON ":"OFF");
logmsg sprintf(" libcurl SSL: %s\n", $ssl_version?"ON ":"OFF");
logmsg sprintf("* debug build: %8s", $debug_build?"ON ":"OFF");
logmsg sprintf(" track memory: %s\n", $has_memory_tracking?"ON ":"OFF");
logmsg sprintf("* valgrind: %8s", $valgrind?"ON ":"OFF");
logmsg sprintf(" HTTP IPv6 %s\n", $http_ipv6?"ON ":"OFF");
logmsg sprintf("* FTP IPv6 %8s", $ftp_ipv6?"ON ":"OFF");
logmsg sprintf(" Libtool lib: %s\n", $libtool?"ON ":"OFF");
logmsg sprintf("* Shared build: %-3s", $has_shared);
logmsg sprintf(" Resolver: %s\n", $resolver);
if($ssl_version) {
logmsg sprintf("* SSL library: %13s\n", $ssllib);
}
logmsg "* Ports:\n";
logmsg sprintf("* HTTP/%d ", $HTTPPORT);
logmsg sprintf("FTP/%d ", $FTPPORT);
logmsg sprintf("FTP2/%d ", $FTP2PORT);
logmsg sprintf("RTSP/%d ", $RTSPPORT);
if($stunnel) {
logmsg sprintf("FTPS/%d ", $FTPSPORT);
logmsg sprintf("HTTPS/%d ", $HTTPSPORT);
}
logmsg sprintf("\n* TFTP/%d ", $TFTPPORT);
if($http_ipv6) {
logmsg sprintf("HTTP-IPv6/%d ", $HTTP6PORT);
logmsg sprintf("RTSP-IPv6/%d ", $RTSP6PORT);
}
if($ftp_ipv6) {
logmsg sprintf("FTP-IPv6/%d ", $FTP6PORT);
}
if($tftp_ipv6) {
logmsg sprintf("TFTP-IPv6/%d ", $TFTP6PORT);
}
logmsg sprintf("\n* GOPHER/%d ", $GOPHERPORT);
if($gopher_ipv6) {
logmsg sprintf("GOPHER-IPv6/%d", $GOPHERPORT);
}
logmsg sprintf("\n* SSH/%d ", $SSHPORT);
logmsg sprintf("SOCKS/%d ", $SOCKSPORT);
logmsg sprintf("POP3/%d ", $POP3PORT);
logmsg sprintf("IMAP/%d ", $IMAPPORT);
logmsg sprintf("SMTP/%d\n", $SMTPPORT);
if($ftp_ipv6) {
logmsg sprintf("* POP3-IPv6/%d ", $POP36PORT);
logmsg sprintf("IMAP-IPv6/%d ", $IMAP6PORT);
logmsg sprintf("SMTP-IPv6/%d\n", $SMTP6PORT);
}
if($httptlssrv) {
logmsg sprintf("* HTTPTLS/%d ", $HTTPTLSPORT);
if($has_ipv6) {
logmsg sprintf("HTTPTLS-IPv6/%d ", $HTTPTLS6PORT);
}
logmsg "\n";
}
logmsg sprintf("* HTTP-PIPE/%d \n", $HTTPPIPEPORT);
$has_textaware = ($^O eq 'MSWin32') || ($^O eq 'msys');
logmsg "***************************************** \n";
}
#######################################################################
# substitute the variable stuff into either a joined up file or
# a command, in either case passed by reference
#
sub subVariables {
my ($thing) = @_;
# ports
$$thing =~ s/%FTP6PORT/$FTP6PORT/g;
$$thing =~ s/%FTP2PORT/$FTP2PORT/g;
$$thing =~ s/%FTPSPORT/$FTPSPORT/g;
$$thing =~ s/%FTPPORT/$FTPPORT/g;
$$thing =~ s/%GOPHER6PORT/$GOPHER6PORT/g;
$$thing =~ s/%GOPHERPORT/$GOPHERPORT/g;
$$thing =~ s/%HTTPTLS6PORT/$HTTPTLS6PORT/g;
$$thing =~ s/%HTTPTLSPORT/$HTTPTLSPORT/g;
$$thing =~ s/%HTTP6PORT/$HTTP6PORT/g;
$$thing =~ s/%HTTPSPORT/$HTTPSPORT/g;
$$thing =~ s/%HTTPPORT/$HTTPPORT/g;
$$thing =~ s/%HTTPPIPEPORT/$HTTPPIPEPORT/g;
$$thing =~ s/%PROXYPORT/$HTTPPROXYPORT/g;
$$thing =~ s/%IMAP6PORT/$IMAP6PORT/g;
$$thing =~ s/%IMAPPORT/$IMAPPORT/g;
$$thing =~ s/%POP36PORT/$POP36PORT/g;
$$thing =~ s/%POP3PORT/$POP3PORT/g;
$$thing =~ s/%RTSP6PORT/$RTSP6PORT/g;
$$thing =~ s/%RTSPPORT/$RTSPPORT/g;
$$thing =~ s/%SMTP6PORT/$SMTP6PORT/g;
$$thing =~ s/%SMTPPORT/$SMTPPORT/g;
$$thing =~ s/%SOCKSPORT/$SOCKSPORT/g;
$$thing =~ s/%SSHPORT/$SSHPORT/g;
$$thing =~ s/%TFTP6PORT/$TFTP6PORT/g;
$$thing =~ s/%TFTPPORT/$TFTPPORT/g;
# client IP addresses
$$thing =~ s/%CLIENT6IP/$CLIENT6IP/g;
$$thing =~ s/%CLIENTIP/$CLIENTIP/g;
# server IP addresses
$$thing =~ s/%HOST6IP/$HOST6IP/g;
$$thing =~ s/%HOSTIP/$HOSTIP/g;
# misc
$$thing =~ s/%CURL/$CURL/g;
$$thing =~ s/%PWD/$pwd/g;
$$thing =~ s/%SRCDIR/$srcdir/g;
$$thing =~ s/%USER/$USER/g;
# The purpose of FTPTIME2 and FTPTIME3 is to provide times that can be
# used for time-out tests and that whould work on most hosts as these
# adjust for the startup/check time for this particular host. We needed
# to do this to make the test suite run better on very slow hosts.
my $ftp2 = $ftpchecktime * 2;
my $ftp3 = $ftpchecktime * 3;
$$thing =~ s/%FTPTIME2/$ftp2/g;
$$thing =~ s/%FTPTIME3/$ftp3/g;
}
sub fixarray {
my @in = @_;
for(@in) {
subVariables \$_;
}
return @in;
}
#######################################################################
# Provide time stamps for single test skipped events
#
sub timestampskippedevents {
my $testnum = $_[0];
return if((not defined($testnum)) || ($testnum < 1));
if($timestats) {
if($timevrfyend{$testnum}) {
return;
}
elsif($timesrvrlog{$testnum}) {
$timevrfyend{$testnum} = $timesrvrlog{$testnum};
return;
}
elsif($timetoolend{$testnum}) {
$timevrfyend{$testnum} = $timetoolend{$testnum};
$timesrvrlog{$testnum} = $timetoolend{$testnum};
}
elsif($timetoolini{$testnum}) {
$timevrfyend{$testnum} = $timetoolini{$testnum};
$timesrvrlog{$testnum} = $timetoolini{$testnum};
$timetoolend{$testnum} = $timetoolini{$testnum};
}
elsif($timesrvrend{$testnum}) {
$timevrfyend{$testnum} = $timesrvrend{$testnum};
$timesrvrlog{$testnum} = $timesrvrend{$testnum};
$timetoolend{$testnum} = $timesrvrend{$testnum};
$timetoolini{$testnum} = $timesrvrend{$testnum};
}
elsif($timesrvrini{$testnum}) {
$timevrfyend{$testnum} = $timesrvrini{$testnum};
$timesrvrlog{$testnum} = $timesrvrini{$testnum};
$timetoolend{$testnum} = $timesrvrini{$testnum};
$timetoolini{$testnum} = $timesrvrini{$testnum};
$timesrvrend{$testnum} = $timesrvrini{$testnum};
}
elsif($timeprepini{$testnum}) {
$timevrfyend{$testnum} = $timeprepini{$testnum};
$timesrvrlog{$testnum} = $timeprepini{$testnum};
$timetoolend{$testnum} = $timeprepini{$testnum};
$timetoolini{$testnum} = $timeprepini{$testnum};
$timesrvrend{$testnum} = $timeprepini{$testnum};
$timesrvrini{$testnum} = $timeprepini{$testnum};
}
}
}
#######################################################################
# Run a single specified test case
#
sub singletest {
my ($evbased, # 1 means switch on if possible (and "curl" is tested)
# returns "not a test" if it can't be used for this test
$testnum,
$count,
$total)=@_;
my @what;
my $why;
my %feature;
my $cmd;
my $disablevalgrind;
# copy test number to a global scope var, this allows
# testnum checking when starting test harness servers.
$testnumcheck = $testnum;
# timestamp test preparation start
$timeprepini{$testnum} = Time::HiRes::time() if($timestats);
if($disttests !~ /test$testnum\W/ ) {
logmsg "Warning: test$testnum not present in tests/data/Makefile.am\n";
}
if($disabled{$testnum}) {
logmsg "Warning: test$testnum is explicitly disabled\n";
}
# load the test case file definition
if(loadtest("${TESTDIR}/test${testnum}")) {
if($verbose) {
# this is not a test
logmsg "RUN: $testnum doesn't look like a test case\n";
}
$why = "no test";
}
else {
@what = getpart("client", "features");
}
# We require a feature to be present
for(@what) {
my $f = $_;
$f =~ s/\s//g;
if($f =~ /^([^!].*)$/) {
# Store the feature for later
$feature{$1} = $1;
if($1 eq "SSL") {
if($ssl_version) {
next;
}
}
elsif($1 eq "OpenSSL") {
if($has_openssl) {
next;
}
}
elsif($1 eq "GnuTLS") {
if($has_gnutls) {
next;
}
}
elsif($1 eq "NSS") {
if($has_nss) {
next;
}
}
elsif($1 eq "axTLS") {
if($has_axtls) {
next;
}
}
elsif($1 eq "WinSSL") {
if($has_winssl) {
next;
}
}
elsif($1 eq "DarwinSSL") {
if($has_darwinssl) {
next;
}
}
elsif($1 eq "unittest") {
if($debug_build) {
next;
}
}
elsif($1 eq "debug") {
if($debug_build) {
next;
}
}
elsif($1 eq "TrackMemory") {
if($has_memory_tracking) {
next;
}
}
elsif($1 eq "large_file") {
if($large_file) {
next;
}
}
elsif($1 eq "idn") {
if($has_idn) {
next;
}
}
elsif($1 eq "ipv6") {
if($has_ipv6) {
next;
}
}
elsif($1 eq "libz") {
if($has_libz) {
next;
}
}
elsif($1 eq "NTLM") {
if($has_ntlm) {
next;
}
}
elsif($1 eq "NTLM_WB") {
if($has_ntlm_wb) {
next;
}
}
elsif($1 eq "SSPI") {
if($has_sspi) {
next;
}
}
elsif($1 eq "getrlimit") {
if($has_getrlimit) {
next;
}
}
elsif($1 eq "crypto") {
if($has_crypto) {
next;
}
}
elsif($1 eq "TLS-SRP") {
if($has_tls_srp) {
next;
}
}
elsif($1 eq "Metalink") {
if($has_metalink) {
next;
}
}
elsif($1 eq "socks") {
next;
}
# See if this "feature" is in the list of supported protocols
elsif (grep /^\Q$1\E$/i, @protocols) {
next;
}
$why = "curl lacks $1 support";
last;
}
}
# We require a feature to not be present
if(!$why) {
for(@what) {
my $f = $_;
$f =~ s/\s//g;
if($f =~ /^!(.*)$/) {
if($1 eq "SSL") {
if(!$ssl_version) {
next;
}
}
elsif($1 eq "OpenSSL") {
if(!$has_openssl) {
next;
}
}
elsif($1 eq "GnuTLS") {
if(!$has_gnutls) {
next;
}
}
elsif($1 eq "NSS") {
if(!$has_nss) {
next;
}
}
elsif($1 eq "axTLS") {
if(!$has_axtls) {
next;
}
}
elsif($1 eq "WinSSL") {
if(!$has_winssl) {
next;
}
}
elsif($1 eq "DarwinSSL") {
if(!$has_darwinssl) {
next;
}
}
elsif($1 eq "TrackMemory") {
if(!$has_memory_tracking) {
next;
}
}
elsif($1 eq "large_file") {
if(!$large_file) {
next;
}
}
elsif($1 eq "idn") {
if(!$has_idn) {
next;
}
}
elsif($1 eq "ipv6") {
if(!$has_ipv6) {
next;
}
}
elsif($1 eq "libz") {
if(!$has_libz) {
next;
}
}
elsif($1 eq "NTLM") {
if(!$has_ntlm) {
next;
}
}
elsif($1 eq "NTLM_WB") {
if(!$has_ntlm_wb) {
next;
}
}
elsif($1 eq "SSPI") {
if(!$has_sspi) {
next;
}
}
elsif($1 eq "getrlimit") {
if(!$has_getrlimit) {
next;
}
}
elsif($1 eq "crypto") {
if(!$has_crypto) {
next;
}
}
elsif($1 eq "TLS-SRP") {
if(!$has_tls_srp) {
next;
}
}
elsif($1 eq "Metalink") {
if(!$has_metalink) {
next;
}
}
else {
next;
}
}
else {
next;
}
$why = "curl has $1 support";
last;
}
}
if(!$why) {
my @keywords = getpart("info", "keywords");
my $match;
my $k;
if(!$keywords[0]) {
$why = "missing the <keywords> section!";
}
for $k (@keywords) {
chomp $k;
if ($disabled_keywords{$k}) {
$why = "disabled by keyword";
} elsif ($enabled_keywords{$k}) {
$match = 1;
}
}
if(!$why && !$match && %enabled_keywords) {
$why = "disabled by missing keyword";
}
}
# test definition may instruct to (un)set environment vars
# this is done this early, so that the precheck can use environment
# variables and still bail out fine on errors
# restore environment variables that were modified in a previous run
foreach my $var (keys %oldenv) {
if($oldenv{$var} eq 'notset') {
delete $ENV{$var} if($ENV{$var});
}
else {
$ENV{$var} = $oldenv{$var};
}
delete $oldenv{$var};
}
# remove test server commands file before servers are started/verified
unlink($FTPDCMD) if(-f $FTPDCMD);
# timestamp required servers verification start
$timesrvrini{$testnum} = Time::HiRes::time() if($timestats);
if(!$why) {
$why = serverfortest($testnum);
}
# timestamp required servers verification end
$timesrvrend{$testnum} = Time::HiRes::time() if($timestats);
my @setenv = getpart("client", "setenv");
if(@setenv) {
foreach my $s (@setenv) {
chomp $s;
subVariables \$s;
if($s =~ /([^=]*)=(.*)/) {
my ($var, $content) = ($1, $2);
# remember current setting, to restore it once test runs
$oldenv{$var} = ($ENV{$var})?"$ENV{$var}":'notset';
# set new value
if(!$content) {
delete $ENV{$var} if($ENV{$var});
}
else {
if($var =~ /^LD_PRELOAD/) {
if(exe_ext() && (exe_ext() eq '.exe')) {
# print "Skipping LD_PRELOAD due to lack of OS support\n";
next;
}
if($debug_build || ($has_shared ne "yes")) {
# print "Skipping LD_PRELOAD due to no release shared build\n";
next;
}
}
$ENV{$var} = "$content";
}
}
}
}
if(!$why) {
# TODO:
# Add a precheck cache. If a precheck command was already invoked
# exactly like this, then use the previous result to speed up
# successive test invokes!
my @precheck = getpart("client", "precheck");
if(@precheck) {
$cmd = $precheck[0];
chomp $cmd;
subVariables \$cmd;
if($cmd) {
my @p = split(/ /, $cmd);
if($p[0] !~ /\//) {
# the first word, the command, does not contain a slash so
# we will scan the "improved" PATH to find the command to
# be able to run it
my $fullp = checktestcmd($p[0]);
if($fullp) {
$p[0] = $fullp;
}
$cmd = join(" ", @p);
}
my @o = `$cmd 2>/dev/null`;
if($o[0]) {
$why = $o[0];
chomp $why;
} elsif($?) {
$why = "precheck command error";
}
logmsg "prechecked $cmd\n" if($verbose);
}
}
}
if($why && !$listonly) {
# there's a problem, count it as "skipped"
$skipped++;
$skipped{$why}++;
$teststat[$testnum]=$why; # store reason for this test case
if(!$short) {
if($skipped{$why} <= 3) {
# show only the first three skips for each reason
logmsg sprintf("test %03d SKIPPED: $why\n", $testnum);
}
}
timestampskippedevents($testnum);
return -1;
}
logmsg sprintf("test %03d...", $testnum) if(!$automakestyle);
# extract the reply data
my @reply = getpart("reply", "data");
my @replycheck = getpart("reply", "datacheck");
my %replyattr = getpartattr("reply", "data");
my %replycheckattr = getpartattr("reply", "datacheck");
if (@replycheck) {
# we use this file instead to check the final output against
if($replycheckattr{'nonewline'}) {
# Yes, we must cut off the final newline from the final line
# of the datacheck
chomp($replycheck[$#replycheck]);
}
if($replycheckattr{'mode'}) {
$replyattr{'mode'} = $replycheckattr{'mode'};
}
@reply=@replycheck;
}
# this is the valid protocol blurb curl should generate
my @protocol= fixarray ( getpart("verify", "protocol") );
# this is the valid protocol blurb curl should generate to a proxy
my @proxyprot = fixarray ( getpart("verify", "proxy") );
# redirected stdout/stderr to these files
$STDOUT="$LOGDIR/stdout$testnum";
$STDERR="$LOGDIR/stderr$testnum";
# if this section exists, we verify that the stdout contained this:
my @validstdout = fixarray ( getpart("verify", "stdout") );
# if this section exists, we verify upload
my @upload = getpart("verify", "upload");
# if this section exists, it might be FTP server instructions:
my @ftpservercmd = getpart("reply", "servercmd");
my $CURLOUT="$LOGDIR/curl$testnum.out"; # curl output if not stdout
# name of the test
my @testname= getpart("client", "name");
my $testname = $testname[0];
$testname =~ s/\n//g;
logmsg "[$testname]\n" if(!$short);
if($listonly) {
timestampskippedevents($testnum);
return 0; # look successful
}
my @codepieces = getpart("client", "tool");
my $tool="";
if(@codepieces) {
$tool = $codepieces[0];
chomp $tool;
}
# remove server output logfile
unlink($SERVERIN);
unlink($SERVER2IN);
unlink($PROXYIN);
if(@ftpservercmd) {
# write the instructions to file
writearray($FTPDCMD, \@ftpservercmd);
}
# get the command line options to use
my @blaha;
($cmd, @blaha)= getpart("client", "command");
if($cmd) {
# make some nice replace operations
$cmd =~ s/\n//g; # no newlines please
# substitute variables in the command line
subVariables \$cmd;
}
else {
# there was no command given, use something silly
$cmd="-";
}
if($has_memory_tracking) {
unlink($memdump);
}
# create a (possibly-empty) file before starting the test
my @inputfile=getpart("client", "file");
my %fileattr = getpartattr("client", "file");
my $filename=$fileattr{'name'};
if(@inputfile || $filename) {
if(!$filename) {
logmsg "ERROR: section client=>file has no name attribute\n";
timestampskippedevents($testnum);
return -1;
}
my $fileContent = join('', @inputfile);
subVariables \$fileContent;
# logmsg "DEBUG: writing file " . $filename . "\n";
open(OUTFILE, ">$filename");
binmode OUTFILE; # for crapage systems, use binary
print OUTFILE $fileContent;
close(OUTFILE);
}
my %cmdhash = getpartattr("client", "command");
my $out="";
if((!$cmdhash{'option'}) || ($cmdhash{'option'} !~ /no-output/)) {
#We may slap on --output!
if (!@validstdout) {
$out=" --output $CURLOUT ";
}
}
my $serverlogslocktimeout = $defserverlogslocktimeout;
if($cmdhash{'timeout'}) {
# test is allowed to override default server logs lock timeout
if($cmdhash{'timeout'} =~ /(\d+)/) {
$serverlogslocktimeout = $1 if($1 >= 0);
}
}
my $postcommanddelay = $defpostcommanddelay;
if($cmdhash{'delay'}) {
# test is allowed to specify a delay after command is executed
if($cmdhash{'delay'} =~ /(\d+)/) {
$postcommanddelay = $1 if($1 > 0);
}
}
my $CMDLINE;
my $cmdargs;
my $cmdtype = $cmdhash{'type'} || "default";
my $fail_due_event_based = $evbased;
if($cmdtype eq "perl") {
# run the command line prepended with "perl"
$cmdargs ="$cmd";
$CMDLINE = "perl ";
$tool=$CMDLINE;
$disablevalgrind=1;
}
elsif($cmdtype eq "shell") {
# run the command line prepended with "/bin/sh"
$cmdargs ="$cmd";
$CMDLINE = "/bin/sh ";
$tool=$CMDLINE;
$disablevalgrind=1;
}
elsif(!$tool) {
# run curl, add suitable command line options
$cmd = "-1 ".$cmd if(exists $feature{"SSL"} && ($has_axtls));
my $inc="";
if((!$cmdhash{'option'}) || ($cmdhash{'option'} !~ /no-include/)) {
$inc = " --include";
}
$cmdargs = "$out$inc ";
$cmdargs .= "--trace-ascii log/trace$testnum ";
$cmdargs .= "--trace-time ";
if($evbased) {
$cmdargs .= "--test-event ";
$fail_due_event_based--;
}
$cmdargs .= $cmd;
}
else {
$cmdargs = " $cmd"; # $cmd is the command line for the test file
$CURLOUT = $STDOUT; # sends received data to stdout
if($tool =~ /^lib/) {
$CMDLINE="$LIBDIR/$tool";
}
elsif($tool =~ /^unit/) {
$CMDLINE="$UNITDIR/$tool";
}
if(! -f $CMDLINE) {
logmsg "The tool set in the test case for this: '$tool' does not exist\n";
timestampskippedevents($testnum);
return -1;
}
$DBGCURL=$CMDLINE;
}
if($gdbthis) {
# gdb is incompatible with valgrind, so disable it when debugging
# Perhaps a better approach would be to run it under valgrind anyway
# with --db-attach=yes or --vgdb=yes.
$disablevalgrind=1;
}
if($fail_due_event_based) {
logmsg "This test cannot run event based\n";
return -1;
}
my @stdintest = getpart("client", "stdin");
if(@stdintest) {
my $stdinfile="$LOGDIR/stdin-for-$testnum";
my %hash = getpartattr("client", "stdin");
if($hash{'nonewline'}) {
# cut off the final newline from the final line of the stdin data
chomp($stdintest[$#stdintest]);
}
writearray($stdinfile, \@stdintest);
$cmdargs .= " <$stdinfile";
}
if(!$tool) {
$CMDLINE="$CURL";
}
my $usevalgrind;
if($valgrind && !$disablevalgrind) {
my @valgrindoption = getpart("verify", "valgrind");
if((!@valgrindoption) || ($valgrindoption[0] !~ /disable/)) {
$usevalgrind = 1;
my $valgrindcmd = "$valgrind ";
$valgrindcmd .= "$valgrind_tool " if($valgrind_tool);
$valgrindcmd .= "--leak-check=yes ";
$valgrindcmd .= "--suppressions=$srcdir/valgrind.supp ";
# $valgrindcmd .= "--gen-suppressions=all ";
$valgrindcmd .= "--num-callers=16 ";
$valgrindcmd .= "${valgrind_logfile}=$LOGDIR/valgrind$testnum";
$CMDLINE = "$valgrindcmd $CMDLINE";
}
}
$CMDLINE .= "$cmdargs >$STDOUT 2>$STDERR";
if($verbose) {
logmsg "$CMDLINE\n";
}
print CMDLOG "$CMDLINE\n";
unlink("core");
my $dumped_core;
my $cmdres;
# Apr 2007: precommand isn't being used and could be removed
my @precommand= getpart("client", "precommand");
if($precommand[0]) {
# this is pure perl to eval!
my $code = join("", @precommand);
eval $code;
if($@) {
logmsg "perl: $code\n";
logmsg "precommand: $@";
stopservers($verbose);
timestampskippedevents($testnum);
return -1;
}
}
if($gdbthis) {
my $gdbinit = "$TESTDIR/gdbinit$testnum";
open(GDBCMD, ">$LOGDIR/gdbcmd");
print GDBCMD "set args $cmdargs\n";
print GDBCMD "show args\n";
print GDBCMD "source $gdbinit\n" if -e $gdbinit;
close(GDBCMD);
}
# timestamp starting of test command
$timetoolini{$testnum} = Time::HiRes::time() if($timestats);
# run the command line we built
if ($torture) {
$cmdres = torture($CMDLINE,
"$gdb --directory libtest $DBGCURL -x $LOGDIR/gdbcmd");
}
elsif($gdbthis) {
my $GDBW = ($gdbxwin) ? "-w" : "";
runclient("$gdb --directory libtest $DBGCURL $GDBW -x $LOGDIR/gdbcmd");
$cmdres=0; # makes it always continue after a debugged run
}
else {
$cmdres = runclient("$CMDLINE");
my $signal_num = $cmdres & 127;
$dumped_core = $cmdres & 128;
if(!$anyway && ($signal_num || $dumped_core)) {
$cmdres = 1000;
}
else {
$cmdres >>= 8;
$cmdres = (2000 + $signal_num) if($signal_num && !$cmdres);
}
}
# timestamp finishing of test command
$timetoolend{$testnum} = Time::HiRes::time() if($timestats);
if(!$dumped_core) {
if(-r "core") {
# there's core file present now!
$dumped_core = 1;
}
}
if($dumped_core) {
logmsg "core dumped\n";
if(0 && $gdb) {
logmsg "running gdb for post-mortem analysis:\n";
open(GDBCMD, ">$LOGDIR/gdbcmd2");
print GDBCMD "bt\n";
close(GDBCMD);
runclient("$gdb --directory libtest -x $LOGDIR/gdbcmd2 -batch $DBGCURL core ");
# unlink("$LOGDIR/gdbcmd2");
}
}
# If a server logs advisor read lock file exists, it is an indication
# that the server has not yet finished writing out all its log files,
# including server request log files used for protocol verification.
# So, if the lock file exists the script waits here a certain amount
# of time until the server removes it, or the given time expires.
if($serverlogslocktimeout) {
my $lockretry = $serverlogslocktimeout * 20;
while((-f $SERVERLOGS_LOCK) && $lockretry--) {
select(undef, undef, undef, 0.05);
}
if(($lockretry < 0) &&
($serverlogslocktimeout >= $defserverlogslocktimeout)) {
logmsg "Warning: server logs lock timeout ",
"($serverlogslocktimeout seconds) expired\n";
}
}
# Test harness ssh server does not have this synchronization mechanism,
# this implies that some ssh server based tests might need a small delay
# once that the client command has run to avoid false test failures.
#
# gnutls-serv also lacks this synchronization mechanism, so gnutls-serv
# based tests might need a small delay once that the client command has
# run to avoid false test failures.
sleep($postcommanddelay) if($postcommanddelay);
# timestamp removal of server logs advisor read lock
$timesrvrlog{$testnum} = Time::HiRes::time() if($timestats);
# test definition might instruct to stop some servers
# stop also all servers relative to the given one
my @killtestservers = getpart("client", "killserver");
if(@killtestservers) {
#
# All servers relative to the given one must be stopped also
#
my @killservers;
foreach my $server (@killtestservers) {
chomp $server;
if($server =~ /^(ftp|http|imap|pop3|smtp)s((\d*)(-ipv6|))$/) {
# given a stunnel ssl server, also kill non-ssl underlying one
push @killservers, "${1}${2}";
}
elsif($server =~ /^(ftp|http|imap|pop3|smtp)((\d*)(-ipv6|))$/) {
# given a non-ssl server, also kill stunnel piggybacking one
push @killservers, "${1}s${2}";
}
elsif($server =~ /^(socks)((\d*)(-ipv6|))$/) {
# given a socks server, also kill ssh underlying one
push @killservers, "ssh${2}";
}
elsif($server =~ /^(ssh)((\d*)(-ipv6|))$/) {
# given a ssh server, also kill socks piggybacking one
push @killservers, "socks${2}";
}
push @killservers, $server;
}
#
# kill sockfilter processes for pingpong relative servers
#
foreach my $server (@killservers) {
if($server =~ /^(ftp|imap|pop3|smtp)s?(\d*)(-ipv6|)$/) {
my $proto = $1;
my $idnum = ($2 && ($2 > 1)) ? $2 : 1;
my $ipvnum = ($3 && ($3 =~ /6$/)) ? 6 : 4;
killsockfilters($proto, $ipvnum, $idnum, $verbose);
}
}
#
# kill server relative pids clearing them in %run hash
#
my $pidlist;
foreach my $server (@killservers) {
if($run{$server}) {
$pidlist .= "$run{$server} ";
$run{$server} = 0;
}
$runcert{$server} = 0 if($runcert{$server});
}
killpid($verbose, $pidlist);
#
# cleanup server pid files
#
foreach my $server (@killservers) {
my $pidfile = $serverpidfile{$server};
my $pid = processexists($pidfile);
if($pid > 0) {
logmsg "Warning: $server server unexpectedly alive\n";
killpid($verbose, $pid);
}
unlink($pidfile) if(-f $pidfile);
}
}
# remove the test server commands file after each test
unlink($FTPDCMD) if(-f $FTPDCMD);
# run the postcheck command
my @postcheck= getpart("client", "postcheck");
if(@postcheck) {
$cmd = $postcheck[0];
chomp $cmd;
subVariables \$cmd;
if($cmd) {
logmsg "postcheck $cmd\n" if($verbose);
my $rc = runclient("$cmd");
# Must run the postcheck command in torture mode in order
# to clean up, but the result can't be relied upon.
if($rc != 0 && !$torture) {
logmsg " postcheck FAILED\n";
# timestamp test result verification end
$timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
return 1;
}
}
}
# restore environment variables that were modified
if(%oldenv) {
foreach my $var (keys %oldenv) {
if($oldenv{$var} eq 'notset') {
delete $ENV{$var} if($ENV{$var});
}
else {
$ENV{$var} = "$oldenv{$var}";
}
}
}
# Skip all the verification on torture tests
if ($torture) {
if(!$cmdres && !$keepoutfiles) {
cleardir($LOGDIR);
}
# timestamp test result verification end
$timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
return $cmdres;
}
my @err = getpart("verify", "errorcode");
my $errorcode = $err[0] || "0";
my $ok="";
my $res;
chomp $errorcode;
if (@validstdout) {
# verify redirected stdout
my @actual = loadarray($STDOUT);
# variable-replace in the stdout we have from the test case file
@validstdout = fixarray(@validstdout);
# get all attributes
my %hash = getpartattr("verify", "stdout");
# get the mode attribute
my $filemode=$hash{'mode'};
if($filemode && ($filemode eq "text") && $has_textaware) {
# text mode when running on windows: fix line endings
map s/\r\n/\n/g, @validstdout;
map s/\n/\r\n/g, @validstdout;
}
if($hash{'nonewline'}) {
# Yes, we must cut off the final newline from the final line
# of the protocol data
chomp($validstdout[$#validstdout]);
}
$res = compare($testnum, $testname, "stdout", \@actual, \@validstdout);
if($res) {
return 1;
}
$ok .= "s";
}
else {
$ok .= "-"; # stdout not checked
}
if(@protocol) {
# Verify the sent request
my @out = loadarray($SERVERIN);
# what to cut off from the live protocol sent by curl
my @strip = getpart("verify", "strip");
my @protstrip=@protocol;
# check if there's any attributes on the verify/protocol section
my %hash = getpartattr("verify", "protocol");
if($hash{'nonewline'}) {
# Yes, we must cut off the final newline from the final line
# of the protocol data
chomp($protstrip[$#protstrip]);
}
for(@strip) {
# strip off all lines that match the patterns from both arrays
chomp $_;
@out = striparray( $_, \@out);
@protstrip= striparray( $_, \@protstrip);
}
# what parts to cut off from the protocol
my @strippart = getpart("verify", "strippart");
my $strip;
for $strip (@strippart) {
chomp $strip;
for(@out) {
eval $strip;
}
}
$res = compare($testnum, $testname, "protocol", \@out, \@protstrip);
if($res) {
return 1;
}
$ok .= "p";
}
else {
$ok .= "-"; # protocol not checked
}
if(!$replyattr{'nocheck'} && (@reply || $replyattr{'sendzero'})) {
# verify the received data
my @out = loadarray($CURLOUT);
# get the mode attribute
my $filemode=$replyattr{'mode'};
if($filemode && ($filemode eq "text") && $has_textaware) {
# text mode when running on windows: fix line endings
map s/\r\n/\n/g, @reply;
map s/\n/\r\n/g, @reply;
}
$res = compare($testnum, $testname, "data", \@out, \@reply);
if ($res) {
return 1;
}
$ok .= "d";
}
else {
$ok .= "-"; # data not checked
}
if(@upload) {
# verify uploaded data
my @out = loadarray("$LOGDIR/upload.$testnum");
$res = compare($testnum, $testname, "upload", \@out, \@upload);
if ($res) {
return 1;
}
$ok .= "u";
}
else {
$ok .= "-"; # upload not checked
}
if(@proxyprot) {
# Verify the sent proxy request
my @out = loadarray($PROXYIN);
# what to cut off from the live protocol sent by curl, we use the
# same rules as for <protocol>
my @strip = getpart("verify", "strip");
my @protstrip=@proxyprot;
# check if there's any attributes on the verify/protocol section
my %hash = getpartattr("verify", "proxy");
if($hash{'nonewline'}) {
# Yes, we must cut off the final newline from the final line
# of the protocol data
chomp($protstrip[$#protstrip]);
}
for(@strip) {
# strip off all lines that match the patterns from both arrays
chomp $_;
@out = striparray( $_, \@out);
@protstrip= striparray( $_, \@protstrip);
}
# what parts to cut off from the protocol
my @strippart = getpart("verify", "strippart");
my $strip;
for $strip (@strippart) {
chomp $strip;
for(@out) {
eval $strip;
}
}
$res = compare($testnum, $testname, "proxy", \@out, \@protstrip);
if($res) {
return 1;
}
$ok .= "P";
}
else {
$ok .= "-"; # protocol not checked
}
my $outputok;
for my $partsuffix (('', '1', '2', '3', '4')) {
my @outfile=getpart("verify", "file".$partsuffix);
if(@outfile || partexists("verify", "file".$partsuffix) ) {
# we're supposed to verify a dynamically generated file!
my %hash = getpartattr("verify", "file".$partsuffix);
my $filename=$hash{'name'};
if(!$filename) {
logmsg "ERROR: section verify=>file$partsuffix ".
"has no name attribute\n";
stopservers($verbose);
# timestamp test result verification end
$timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
return -1;
}
my @generated=loadarray($filename);
# what parts to cut off from the file
my @stripfile = getpart("verify", "stripfile".$partsuffix);
my $filemode=$hash{'mode'};
if($filemode && ($filemode eq "text") && $has_textaware) {
# text mode when running on windows: fix line endings
map s/\r\n/\n/g, @outfile;
map s/\n/\r\n/g, @outfile;
}
my $strip;
for $strip (@stripfile) {
chomp $strip;
my @newgen;
for(@generated) {
eval $strip;
if($_) {
push @newgen, $_;
}
}
# this is to get rid of array entries that vanished (zero
# length) because of replacements
@generated = @newgen;
}
@outfile = fixarray(@outfile);
$res = compare($testnum, $testname, "output ($filename)",
\@generated, \@outfile);
if($res) {
return 1;
}
$outputok = 1; # output checked
}
}
$ok .= ($outputok) ? "o" : "-"; # output checked or not
# accept multiple comma-separated error codes
my @splerr = split(/ *, */, $errorcode);
my $errok;
foreach my $e (@splerr) {
if($e == $cmdres) {
# a fine error code
$errok = 1;
last;
}
}
if($errok) {
$ok .= "e";
}
else {
if(!$short) {
logmsg sprintf("\n%s returned $cmdres, when expecting %s\n",
(!$tool)?"curl":$tool, $errorcode);
}
logmsg " exit FAILED\n";
# timestamp test result verification end
$timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
return 1;
}
if($has_memory_tracking) {
if(! -f $memdump) {
logmsg "\n** ALERT! memory tracking with no output file?\n"
if(!$cmdtype eq "perl");
}
else {
my @memdata=`$memanalyze $memdump`;
my $leak=0;
for(@memdata) {
if($_ ne "") {
# well it could be other memory problems as well, but
# we call it leak for short here
$leak=1;
}
}
if($leak) {
logmsg "\n** MEMORY FAILURE\n";
logmsg @memdata;
# timestamp test result verification end
$timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
return 1;
}
else {
$ok .= "m";
}
}
}
else {
$ok .= "-"; # memory not checked
}
if($valgrind) {
if($usevalgrind) {
unless(opendir(DIR, "$LOGDIR")) {
logmsg "ERROR: unable to read $LOGDIR\n";
# timestamp test result verification end
$timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
return 1;
}
my @files = readdir(DIR);
closedir(DIR);
my $vgfile;
foreach my $file (@files) {
if($file =~ /^valgrind$testnum(\..*|)$/) {
$vgfile = $file;
last;
}
}
if(!$vgfile) {
logmsg "ERROR: valgrind log file missing for test $testnum\n";
# timestamp test result verification end
$timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
return 1;
}
my @e = valgrindparse($srcdir, $feature{'SSL'}, "$LOGDIR/$vgfile");
if(@e && $e[0]) {
if($automakestyle) {
logmsg "FAIL: $testnum - $testname - valgrind\n";
}
else {
logmsg " valgrind ERROR ";
logmsg @e;
}
# timestamp test result verification end
$timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
return 1;
}
$ok .= "v";
}
else {
if(!$short && !$disablevalgrind) {
logmsg " valgrind SKIPPED\n";
}
$ok .= "-"; # skipped
}
}
else {
$ok .= "-"; # valgrind not checked
}
# add 'E' for event-based
$ok .= $evbased ? "E" : "-";
logmsg "$ok " if(!$short);
my $sofar= time()-$start;
my $esttotal = $sofar/$count * $total;
my $estleft = $esttotal - $sofar;
my $left=sprintf("remaining: %02d:%02d",
$estleft/60,
$estleft%60);
if(!$automakestyle) {
logmsg sprintf("OK (%-3d out of %-3d, %s)\n", $count, $total, $left);
}
else {
logmsg "PASS: $testnum - $testname\n";
}
# the test succeeded, remove all log files
if(!$keepoutfiles) {
cleardir($LOGDIR);
}
# timestamp test result verification end
$timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
return 0;
}
#######################################################################
# Stop all running test servers
#
sub stopservers {
my $verbose = $_[0];
#
# kill sockfilter processes for all pingpong servers
#
killallsockfilters($verbose);
#
# kill all server pids from %run hash clearing them
#
my $pidlist;
foreach my $server (keys %run) {
if($run{$server}) {
if($verbose) {
my $prev = 0;
my $pids = $run{$server};
foreach my $pid (split(' ', $pids)) {
if($pid != $prev) {
logmsg sprintf("* kill pid for %s => %d\n",
$server, $pid);
$prev = $pid;
}
}
}
$pidlist .= "$run{$server} ";
$run{$server} = 0;
}
$runcert{$server} = 0 if($runcert{$server});
}
killpid($verbose, $pidlist);
#
# cleanup all server pid files
#
foreach my $server (keys %serverpidfile) {
my $pidfile = $serverpidfile{$server};
my $pid = processexists($pidfile);
if($pid > 0) {
logmsg "Warning: $server server unexpectedly alive\n";
killpid($verbose, $pid);
}
unlink($pidfile) if(-f $pidfile);
}
}
#######################################################################
# startservers() starts all the named servers
#
# Returns: string with error reason or blank for success
#
sub startservers {
my @what = @_;
my ($pid, $pid2);
for(@what) {
my (@whatlist) = split(/\s+/,$_);
my $what = lc($whatlist[0]);
$what =~ s/[^a-z0-9-]//g;
my $certfile;
if($what =~ /^(ftp|http|imap|pop3|smtp)s((\d*)(-ipv6|))$/) {
$certfile = ($whatlist[1]) ? $whatlist[1] : 'stunnel.pem';
}
if(($what eq "pop3") ||
($what eq "ftp") ||
($what eq "imap") ||
($what eq "smtp")) {
if($torture && $run{$what} &&
!responsive_pingpong_server($what, "", $verbose)) {
stopserver($what);
}
if(!$run{$what}) {
($pid, $pid2) = runpingpongserver($what, "", $verbose);
if($pid <= 0) {
return "failed starting ". uc($what) ." server";
}
printf ("* pid $what => %d %d\n", $pid, $pid2) if($verbose);
$run{$what}="$pid $pid2";
}
}
elsif($what eq "ftp2") {
if($torture && $run{'ftp2'} &&
!responsive_pingpong_server("ftp", "2", $verbose)) {
stopserver('ftp2');
}
if(!$run{'ftp2'}) {
($pid, $pid2) = runpingpongserver("ftp", "2", $verbose);
if($pid <= 0) {
return "failed starting FTP2 server";
}
printf ("* pid ftp2 => %d %d\n", $pid, $pid2) if($verbose);
$run{'ftp2'}="$pid $pid2";
}
}
elsif($what eq "ftp-ipv6") {
if($torture && $run{'ftp-ipv6'} &&
!responsive_pingpong_server("ftp", "", $verbose, "ipv6")) {
stopserver('ftp-ipv6');
}
if(!$run{'ftp-ipv6'}) {
($pid, $pid2) = runpingpongserver("ftp", "", $verbose, "ipv6");
if($pid <= 0) {
return "failed starting FTP-IPv6 server";
}
logmsg sprintf("* pid ftp-ipv6 => %d %d\n", $pid,
$pid2) if($verbose);
$run{'ftp-ipv6'}="$pid $pid2";
}
}
elsif($what eq "gopher") {
if($torture && $run{'gopher'} &&
!responsive_http_server("gopher", $verbose, 0, $GOPHERPORT)) {
stopserver('gopher');
}
if(!$run{'gopher'}) {
($pid, $pid2) = runhttpserver("gopher", $verbose, 0,
$GOPHERPORT);
if($pid <= 0) {
return "failed starting GOPHER server";
}
logmsg sprintf ("* pid gopher => %d %d\n", $pid, $pid2)
if($verbose);
$run{'gopher'}="$pid $pid2";
}
}
elsif($what eq "gopher-ipv6") {
if($torture && $run{'gopher-ipv6'} &&
!responsive_http_server("gopher", $verbose, "ipv6",
$GOPHER6PORT)) {
stopserver('gopher-ipv6');
}
if(!$run{'gopher-ipv6'}) {
($pid, $pid2) = runhttpserver("gopher", $verbose, "ipv6",
$GOPHER6PORT);
if($pid <= 0) {
return "failed starting GOPHER-IPv6 server";
}
logmsg sprintf("* pid gopher-ipv6 => %d %d\n", $pid,
$pid2) if($verbose);
$run{'gopher-ipv6'}="$pid $pid2";
}
}
elsif($what eq "http") {
if($torture && $run{'http'} &&
!responsive_http_server("http", $verbose, 0, $HTTPPORT)) {
stopserver('http');
}
if(!$run{'http'}) {
($pid, $pid2) = runhttpserver("http", $verbose, 0,
$HTTPPORT);
if($pid <= 0) {
return "failed starting HTTP server";
}
logmsg sprintf ("* pid http => %d %d\n", $pid, $pid2)
if($verbose);
$run{'http'}="$pid $pid2";
}
}
elsif($what eq "http-proxy") {
if($torture && $run{'http-proxy'} &&
!responsive_http_server("http", $verbose, "proxy",
$HTTPPROXYPORT)) {
stopserver('http-proxy');
}
if(!$run{'http-proxy'}) {
($pid, $pid2) = runhttpserver("http", $verbose, "proxy",
$HTTPPROXYPORT);
if($pid <= 0) {
return "failed starting HTTP-proxy server";
}
logmsg sprintf ("* pid http-proxy => %d %d\n", $pid, $pid2)
if($verbose);
$run{'http-proxy'}="$pid $pid2";
}
}
elsif($what eq "http-ipv6") {
if($torture && $run{'http-ipv6'} &&
!responsive_http_server("http", $verbose, "IPv6", $HTTP6PORT)) {
stopserver('http-ipv6');
}
if(!$run{'http-ipv6'}) {
($pid, $pid2) = runhttpserver("http", $verbose, "ipv6",
$HTTP6PORT);
if($pid <= 0) {
return "failed starting HTTP-IPv6 server";
}
logmsg sprintf("* pid http-ipv6 => %d %d\n", $pid, $pid2)
if($verbose);
$run{'http-ipv6'}="$pid $pid2";
}
}
elsif($what eq "http-pipe") {
if($torture && $run{'http-pipe'} &&
!responsive_http_server("http", $verbose, "pipe",
$HTTPPIPEPORT)) {
stopserver('http-pipe');
}
if(!$run{'http-pipe'}) {
($pid, $pid2) = runhttpserver("http", $verbose, "pipe",
$HTTPPIPEPORT);
if($pid <= 0) {
return "failed starting HTTP-pipe server";
}
logmsg sprintf ("* pid http-pipe => %d %d\n", $pid, $pid2)
if($verbose);
$run{'http-pipe'}="$pid $pid2";
}
}
elsif($what eq "rtsp") {
if($torture && $run{'rtsp'} &&
!responsive_rtsp_server($verbose)) {
stopserver('rtsp');
}
if(!$run{'rtsp'}) {
($pid, $pid2) = runrtspserver($verbose);
if($pid <= 0) {
return "failed starting RTSP server";
}
printf ("* pid rtsp => %d %d\n", $pid, $pid2) if($verbose);
$run{'rtsp'}="$pid $pid2";
}
}
elsif($what eq "rtsp-ipv6") {
if($torture && $run{'rtsp-ipv6'} &&
!responsive_rtsp_server($verbose, "IPv6")) {
stopserver('rtsp-ipv6');
}
if(!$run{'rtsp-ipv6'}) {
($pid, $pid2) = runrtspserver($verbose, "IPv6");
if($pid <= 0) {
return "failed starting RTSP-IPv6 server";
}
logmsg sprintf("* pid rtsp-ipv6 => %d %d\n", $pid, $pid2)
if($verbose);
$run{'rtsp-ipv6'}="$pid $pid2";
}
}
elsif($what eq "ftps") {
if(!$stunnel) {
# we can't run ftps tests without stunnel
return "no stunnel";
}
if(!$ssl_version) {
# we can't run ftps tests if libcurl is SSL-less
return "curl lacks SSL support";
}
if($runcert{'ftps'} && ($runcert{'ftps'} ne $certfile)) {
# stop server when running and using a different cert
stopserver('ftps');
}
if($torture && $run{'ftp'} &&
!responsive_pingpong_server("ftp", "", $verbose)) {
stopserver('ftp');
}
if(!$run{'ftp'}) {
($pid, $pid2) = runpingpongserver("ftp", "", $verbose);
if($pid <= 0) {
return "failed starting FTP server";
}
printf ("* pid ftp => %d %d\n", $pid, $pid2) if($verbose);
$run{'ftp'}="$pid $pid2";
}
if(!$run{'ftps'}) {
($pid, $pid2) = runftpsserver($verbose, "", $certfile);
if($pid <= 0) {
return "failed starting FTPS server (stunnel)";
}
logmsg sprintf("* pid ftps => %d %d\n", $pid, $pid2)
if($verbose);
$run{'ftps'}="$pid $pid2";
}
}
elsif($what eq "file") {
# we support it but have no server!
}
elsif($what eq "https") {
if(!$stunnel) {
# we can't run https tests without stunnel
return "no stunnel";
}
if(!$ssl_version) {
# we can't run https tests if libcurl is SSL-less
return "curl lacks SSL support";
}
if($runcert{'https'} && ($runcert{'https'} ne $certfile)) {
# stop server when running and using a different cert
stopserver('https');
}
if($torture && $run{'http'} &&
!responsive_http_server("http", $verbose, 0, $HTTPPORT)) {
stopserver('http');
}
if(!$run{'http'}) {
($pid, $pid2) = runhttpserver("http", $verbose, 0,
$HTTPPORT);
if($pid <= 0) {
return "failed starting HTTP server";
}
printf ("* pid http => %d %d\n", $pid, $pid2) if($verbose);
$run{'http'}="$pid $pid2";
}
if(!$run{'https'}) {
($pid, $pid2) = runhttpsserver($verbose, "", $certfile);
if($pid <= 0) {
return "failed starting HTTPS server (stunnel)";
}
logmsg sprintf("* pid https => %d %d\n", $pid, $pid2)
if($verbose);
$run{'https'}="$pid $pid2";
}
}
elsif($what eq "httptls") {
if(!$httptlssrv) {
# for now, we can't run http TLS-EXT tests without gnutls-serv
return "no gnutls-serv";
}
if($torture && $run{'httptls'} &&
!responsive_httptls_server($verbose, "IPv4")) {
stopserver('httptls');
}
if(!$run{'httptls'}) {
($pid, $pid2) = runhttptlsserver($verbose, "IPv4");
if($pid <= 0) {
return "failed starting HTTPTLS server (gnutls-serv)";
}
logmsg sprintf("* pid httptls => %d %d\n", $pid, $pid2)
if($verbose);
$run{'httptls'}="$pid $pid2";
}
}
elsif($what eq "httptls-ipv6") {
if(!$httptlssrv) {
# for now, we can't run http TLS-EXT tests without gnutls-serv
return "no gnutls-serv";
}
if($torture && $run{'httptls-ipv6'} &&
!responsive_httptls_server($verbose, "IPv6")) {
stopserver('httptls-ipv6');
}
if(!$run{'httptls-ipv6'}) {
($pid, $pid2) = runhttptlsserver($verbose, "IPv6");
if($pid <= 0) {
return "failed starting HTTPTLS-IPv6 server (gnutls-serv)";
}
logmsg sprintf("* pid httptls-ipv6 => %d %d\n", $pid, $pid2)
if($verbose);
$run{'httptls-ipv6'}="$pid $pid2";
}
}
elsif($what eq "tftp") {
if($torture && $run{'tftp'} &&
!responsive_tftp_server("", $verbose)) {
stopserver('tftp');
}
if(!$run{'tftp'}) {
($pid, $pid2) = runtftpserver("", $verbose);
if($pid <= 0) {
return "failed starting TFTP server";
}
printf ("* pid tftp => %d %d\n", $pid, $pid2) if($verbose);
$run{'tftp'}="$pid $pid2";
}
}
elsif($what eq "tftp-ipv6") {
if($torture && $run{'tftp-ipv6'} &&
!responsive_tftp_server("", $verbose, "IPv6")) {
stopserver('tftp-ipv6');
}
if(!$run{'tftp-ipv6'}) {
($pid, $pid2) = runtftpserver("", $verbose, "IPv6");
if($pid <= 0) {
return "failed starting TFTP-IPv6 server";
}
printf("* pid tftp-ipv6 => %d %d\n", $pid, $pid2) if($verbose);
$run{'tftp-ipv6'}="$pid $pid2";
}
}
elsif($what eq "sftp" || $what eq "scp" || $what eq "socks4" || $what eq "socks5" ) {
if(!$run{'ssh'}) {
($pid, $pid2) = runsshserver("", $verbose);
if($pid <= 0) {
return "failed starting SSH server";
}
printf ("* pid ssh => %d %d\n", $pid, $pid2) if($verbose);
$run{'ssh'}="$pid $pid2";
}
if($what eq "socks4" || $what eq "socks5") {
if(!$run{'socks'}) {
($pid, $pid2) = runsocksserver("", $verbose);
if($pid <= 0) {
return "failed starting socks server";
}
printf ("* pid socks => %d %d\n", $pid, $pid2) if($verbose);
$run{'socks'}="$pid $pid2";
}
}
if($what eq "socks5") {
if(!$sshdid) {
# Not an OpenSSH or SunSSH ssh daemon
logmsg "Not OpenSSH or SunSSH; socks5 tests need at least OpenSSH 3.7\n";
return "failed starting socks5 server";
}
elsif(($sshdid =~ /OpenSSH/) && ($sshdvernum < 370)) {
# Need OpenSSH 3.7 for socks5 - http://www.openssh.com/txt/release-3.7
logmsg "$sshdverstr insufficient; socks5 tests need at least OpenSSH 3.7\n";
return "failed starting socks5 server";
}
elsif(($sshdid =~ /SunSSH/) && ($sshdvernum < 100)) {
# Need SunSSH 1.0 for socks5
logmsg "$sshdverstr insufficient; socks5 tests need at least SunSSH 1.0\n";
return "failed starting socks5 server";
}
}
}
elsif($what eq "none") {
logmsg "* starts no server\n" if ($verbose);
}
else {
warn "we don't support a server for $what";
return "no server for $what";
}
}
return 0;
}
##############################################################################
# This function makes sure the right set of server is running for the
# specified test case. This is a useful design when we run single tests as not
# all servers need to run then!
#
# Returns: a string, blank if everything is fine or a reason why it failed
#
sub serverfortest {
my ($testnum)=@_;
my @what = getpart("client", "server");
if(!$what[0]) {
warn "Test case $testnum has no server(s) specified";
return "no server specified";
}
for(my $i = scalar(@what) - 1; $i >= 0; $i--) {
my $srvrline = $what[$i];
chomp $srvrline if($srvrline);
if($srvrline =~ /^(\S+)((\s*)(.*))/) {
my $server = "${1}";
my $lnrest = "${2}";
my $tlsext;
if($server =~ /^(httptls)(\+)(ext|srp)(\d*)(-ipv6|)$/) {
$server = "${1}${4}${5}";
$tlsext = uc("TLS-${3}");
}
if(! grep /^\Q$server\E$/, @protocols) {
if(substr($server,0,5) ne "socks") {
if($tlsext) {
return "curl lacks $tlsext support";
}
else {
return "curl lacks $server server support";
}
}
}
$what[$i] = "$server$lnrest" if($tlsext);
}
}
return &startservers(@what);
}
#######################################################################
# runtimestats displays test-suite run time statistics
#
sub runtimestats {
my $lasttest = $_[0];
return if(not $timestats);
logmsg "\nTest suite total running time breakdown per task...\n\n";
my @timesrvr;
my @timeprep;
my @timetool;
my @timelock;
my @timevrfy;
my @timetest;
my $timesrvrtot = 0.0;
my $timepreptot = 0.0;
my $timetooltot = 0.0;
my $timelocktot = 0.0;
my $timevrfytot = 0.0;
my $timetesttot = 0.0;
my $counter;
for my $testnum (1 .. $lasttest) {
if($timesrvrini{$testnum}) {
$timesrvrtot += $timesrvrend{$testnum} - $timesrvrini{$testnum};
$timepreptot +=
(($timetoolini{$testnum} - $timeprepini{$testnum}) -
($timesrvrend{$testnum} - $timesrvrini{$testnum}));
$timetooltot += $timetoolend{$testnum} - $timetoolini{$testnum};
$timelocktot += $timesrvrlog{$testnum} - $timetoolend{$testnum};
$timevrfytot += $timevrfyend{$testnum} - $timesrvrlog{$testnum};
$timetesttot += $timevrfyend{$testnum} - $timeprepini{$testnum};
push @timesrvr, sprintf("%06.3f %04d",
$timesrvrend{$testnum} - $timesrvrini{$testnum}, $testnum);
push @timeprep, sprintf("%06.3f %04d",
($timetoolini{$testnum} - $timeprepini{$testnum}) -
($timesrvrend{$testnum} - $timesrvrini{$testnum}), $testnum);
push @timetool, sprintf("%06.3f %04d",
$timetoolend{$testnum} - $timetoolini{$testnum}, $testnum);
push @timelock, sprintf("%06.3f %04d",
$timesrvrlog{$testnum} - $timetoolend{$testnum}, $testnum);
push @timevrfy, sprintf("%06.3f %04d",
$timevrfyend{$testnum} - $timesrvrlog{$testnum}, $testnum);
push @timetest, sprintf("%06.3f %04d",
$timevrfyend{$testnum} - $timeprepini{$testnum}, $testnum);
}
}
{
no warnings 'numeric';
@timesrvr = sort { $b <=> $a } @timesrvr;
@timeprep = sort { $b <=> $a } @timeprep;
@timetool = sort { $b <=> $a } @timetool;
@timelock = sort { $b <=> $a } @timelock;
@timevrfy = sort { $b <=> $a } @timevrfy;
@timetest = sort { $b <=> $a } @timetest;
}
logmsg "Spent ". sprintf("%08.3f ", $timesrvrtot) .
"seconds starting and verifying test harness servers.\n";
logmsg "Spent ". sprintf("%08.3f ", $timepreptot) .
"seconds reading definitions and doing test preparations.\n";
logmsg "Spent ". sprintf("%08.3f ", $timetooltot) .
"seconds actually running test tools.\n";
logmsg "Spent ". sprintf("%08.3f ", $timelocktot) .
"seconds awaiting server logs lock removal.\n";
logmsg "Spent ". sprintf("%08.3f ", $timevrfytot) .
"seconds verifying test results.\n";
logmsg "Spent ". sprintf("%08.3f ", $timetesttot) .
"seconds doing all of the above.\n";
$counter = 25;
logmsg "\nTest server starting and verification time per test ".
sprintf("(%s)...\n\n", (not $fullstats)?"top $counter":"full");
logmsg "-time- test\n";
logmsg "------ ----\n";
foreach my $txt (@timesrvr) {
last if((not $fullstats) && (not $counter--));
logmsg "$txt\n";
}
$counter = 10;
logmsg "\nTest definition reading and preparation time per test ".
sprintf("(%s)...\n\n", (not $fullstats)?"top $counter":"full");
logmsg "-time- test\n";
logmsg "------ ----\n";
foreach my $txt (@timeprep) {
last if((not $fullstats) && (not $counter--));
logmsg "$txt\n";
}
$counter = 25;
logmsg "\nTest tool execution time per test ".
sprintf("(%s)...\n\n", (not $fullstats)?"top $counter":"full");
logmsg "-time- test\n";
logmsg "------ ----\n";
foreach my $txt (@timetool) {
last if((not $fullstats) && (not $counter--));
logmsg "$txt\n";
}
$counter = 15;
logmsg "\nTest server logs lock removal time per test ".
sprintf("(%s)...\n\n", (not $fullstats)?"top $counter":"full");
logmsg "-time- test\n";
logmsg "------ ----\n";
foreach my $txt (@timelock) {
last if((not $fullstats) && (not $counter--));
logmsg "$txt\n";
}
$counter = 10;
logmsg "\nTest results verification time per test ".
sprintf("(%s)...\n\n", (not $fullstats)?"top $counter":"full");
logmsg "-time- test\n";
logmsg "------ ----\n";
foreach my $txt (@timevrfy) {
last if((not $fullstats) && (not $counter--));
logmsg "$txt\n";
}
$counter = 50;
logmsg "\nTotal time per test ".
sprintf("(%s)...\n\n", (not $fullstats)?"top $counter":"full");
logmsg "-time- test\n";
logmsg "------ ----\n";
foreach my $txt (@timetest) {
last if((not $fullstats) && (not $counter--));
logmsg "$txt\n";
}
logmsg "\n";
}
#######################################################################
# Check options to this test program
#
my $number=0;
my $fromnum=-1;
my @testthis;
while(@ARGV) {
if ($ARGV[0] eq "-v") {
# verbose output
$verbose=1;
}
elsif($ARGV[0] =~ /^-b(.*)/) {
my $portno=$1;
if($portno =~ s/(\d+)$//) {
$base = int $1;
}
}
elsif ($ARGV[0] eq "-c") {
# use this path to curl instead of default
$DBGCURL=$CURL=$ARGV[1];
shift @ARGV;
}
elsif ($ARGV[0] eq "-vc") {
# use this path to a curl used to verify servers
# Particularly useful when you introduce a crashing bug somewhere in
# the development version as then it won't be able to run any tests
# since it can't verify the servers!
$VCURL=$ARGV[1];
shift @ARGV;
}
elsif ($ARGV[0] eq "-d") {
# have the servers display protocol output
$debugprotocol=1;
}
elsif ($ARGV[0] eq "-g") {
# run this test with gdb
$gdbthis=1;
}
elsif ($ARGV[0] eq "-gw") {
# run this test with windowed gdb
$gdbthis=1;
$gdbxwin=1;
}
elsif($ARGV[0] eq "-s") {
# short output
$short=1;
}
elsif($ARGV[0] eq "-am") {
# automake-style output
$short=1;
$automakestyle=1;
}
elsif($ARGV[0] eq "-n") {
# no valgrind
undef $valgrind;
}
elsif($ARGV[0] =~ /^-t(.*)/) {
# torture
$torture=1;
my $xtra = $1;
if($xtra =~ s/(\d+)$//) {
$tortalloc = $1;
}
# we undef valgrind to make this fly in comparison
undef $valgrind;
}
elsif($ARGV[0] eq "-a") {
# continue anyway, even if a test fail
$anyway=1;
}
elsif($ARGV[0] eq "-e") {
# run the tests cases event based if possible
$run_event_based=1;
}
elsif($ARGV[0] eq "-p") {
$postmortem=1;
}
elsif($ARGV[0] eq "-l") {
# lists the test case names only
$listonly=1;
}
elsif($ARGV[0] eq "-k") {
# keep stdout and stderr files after tests
$keepoutfiles=1;
}
elsif($ARGV[0] eq "-r") {
# run time statistics needs Time::HiRes
if($Time::HiRes::VERSION) {
keys(%timeprepini) = 1000;
keys(%timesrvrini) = 1000;
keys(%timesrvrend) = 1000;
keys(%timetoolini) = 1000;
keys(%timetoolend) = 1000;
keys(%timesrvrlog) = 1000;
keys(%timevrfyend) = 1000;
$timestats=1;
$fullstats=0;
}
}
elsif($ARGV[0] eq "-rf") {
# run time statistics needs Time::HiRes
if($Time::HiRes::VERSION) {
keys(%timeprepini) = 1000;
keys(%timesrvrini) = 1000;
keys(%timesrvrend) = 1000;
keys(%timetoolini) = 1000;
keys(%timetoolend) = 1000;
keys(%timesrvrlog) = 1000;
keys(%timevrfyend) = 1000;
$timestats=1;
$fullstats=1;
}
}
elsif(($ARGV[0] eq "-h") || ($ARGV[0] eq "--help")) {
# show help text
print <<EOHELP
Usage: runtests.pl [options] [test selection(s)]
-a continue even if a test fails
-bN use base port number N for test servers (default $base)
-c path use this curl executable
-d display server debug info
-g run the test case with gdb
-gw run the test case with gdb as a windowed application
-h this help text
-k keep stdout and stderr files present after tests
-l list all test case names/descriptions
-n no valgrind
-p print log file contents when a test fails
-r run time statistics
-rf full run time statistics
-s short output
-am automake style output PASS/FAIL: [number] [name]
-t[N] torture (simulate memory alloc failures); N means fail Nth alloc
-v verbose output
-vc path use this curl only to verify the existing servers
[num] like "5 6 9" or " 5 to 22 " to run those tests only
[!num] like "!5 !6 !9" to disable those tests
[keyword] like "IPv6" to select only tests containing the key word
[!keyword] like "!cookies" to disable any tests containing the key word
EOHELP
;
exit;
}
elsif($ARGV[0] =~ /^(\d+)/) {
$number = $1;
if($fromnum >= 0) {
for($fromnum .. $number) {
push @testthis, $_;
}
$fromnum = -1;
}
else {
push @testthis, $1;
}
}
elsif($ARGV[0] =~ /^to$/i) {
$fromnum = $number+1;
}
elsif($ARGV[0] =~ /^!(\d+)/) {
$fromnum = -1;
$disabled{$1}=$1;
}
elsif($ARGV[0] =~ /^!(.+)/) {
$disabled_keywords{$1}=$1;
}
elsif($ARGV[0] =~ /^([-[{a-zA-Z].*)/) {
$enabled_keywords{$1}=$1;
}
else {
print "Unknown option: $ARGV[0]\n";
exit;
}
shift @ARGV;
}
if(@testthis && ($testthis[0] ne "")) {
$TESTCASES=join(" ", @testthis);
}
if($valgrind) {
# we have found valgrind on the host, use it
# verify that we can invoke it fine
my $code = runclient("valgrind >/dev/null 2>&1");
if(($code>>8) != 1) {
#logmsg "Valgrind failure, disable it\n";
undef $valgrind;
} else {
# since valgrind 2.1.x, '--tool' option is mandatory
# use it, if it is supported by the version installed on the system
runclient("valgrind --help 2>&1 | grep -- --tool > /dev/null 2>&1");
if (($? >> 8)==0) {
$valgrind_tool="--tool=memcheck";
}
open(C, "<$CURL");
my $l = <C>;
if($l =~ /^\#\!/) {
# A shell script. This is typically when built with libtool,
$valgrind="../libtool --mode=execute $valgrind";
}
close(C);
# valgrind 3 renamed the --logfile option to --log-file!!!
my $ver=join(' ', runclientoutput("valgrind --version"));
# cut off all but digits and dots
$ver =~ s/[^0-9.]//g;
if($ver =~ /^(\d+)/) {
$ver = $1;
if($ver >= 3) {
$valgrind_logfile="--log-file";
}
}
}
}
if ($gdbthis) {
# open the executable curl and read the first 4 bytes of it
open(CHECK, "<$CURL");
my $c;
sysread CHECK, $c, 4;
close(CHECK);
if($c eq "#! /") {
# A shell script. This is typically when built with libtool,
$libtool = 1;
$gdb = "libtool --mode=execute gdb";
}
}
$HTTPPORT = $base++; # HTTP server port
$HTTPSPORT = $base++; # HTTPS (stunnel) server port
$FTPPORT = $base++; # FTP server port
$FTPSPORT = $base++; # FTPS (stunnel) server port
$HTTP6PORT = $base++; # HTTP IPv6 server port
$FTP2PORT = $base++; # FTP server 2 port
$FTP6PORT = $base++; # FTP IPv6 port
$TFTPPORT = $base++; # TFTP (UDP) port
$TFTP6PORT = $base++; # TFTP IPv6 (UDP) port
$SSHPORT = $base++; # SSH (SCP/SFTP) port
$SOCKSPORT = $base++; # SOCKS port
$POP3PORT = $base++; # POP3 server port
$POP36PORT = $base++; # POP3 IPv6 server port
$IMAPPORT = $base++; # IMAP server port
$IMAP6PORT = $base++; # IMAP IPv6 server port
$SMTPPORT = $base++; # SMTP server port
$SMTP6PORT = $base++; # SMTP IPv6 server port
$RTSPPORT = $base++; # RTSP server port
$RTSP6PORT = $base++; # RTSP IPv6 server port
$GOPHERPORT = $base++; # Gopher IPv4 server port
$GOPHER6PORT = $base++; # Gopher IPv6 server port
$HTTPTLSPORT = $base++; # HTTP TLS (non-stunnel) server port
$HTTPTLS6PORT = $base++; # HTTP TLS (non-stunnel) IPv6 server port
$HTTPPROXYPORT = $base++; # HTTP proxy port, when using CONNECT
$HTTPPIPEPORT = $base++; # HTTP pipelining port
#######################################################################
# clear and create logging directory:
#
cleardir($LOGDIR);
mkdir($LOGDIR, 0777);
#######################################################################
# initialize some variables
#
get_disttests();
init_serverpidfile_hash();
#######################################################################
# Output curl version and host info being tested
#
if(!$listonly) {
checksystem();
}
#######################################################################
# Fetch all disabled tests
#
open(D, "<$TESTDIR/DISABLED");
while(<D>) {
if(/^ *\#/) {
# allow comments
next;
}
if($_ =~ /(\d+)/) {
$disabled{$1}=$1; # disable this test number
}
}
close(D);
#######################################################################
# If 'all' tests are requested, find out all test numbers
#
if ( $TESTCASES eq "all") {
# Get all commands and find out their test numbers
opendir(DIR, $TESTDIR) || die "can't opendir $TESTDIR: $!";
my @cmds = grep { /^test([0-9]+)$/ && -f "$TESTDIR/$_" } readdir(DIR);
closedir(DIR);
$TESTCASES=""; # start with no test cases
# cut off everything but the digits
for(@cmds) {
$_ =~ s/[a-z\/\.]*//g;
}
# sort the numbers from low to high
foreach my $n (sort { $a <=> $b } @cmds) {
if($disabled{$n}) {
# skip disabled test cases
my $why = "configured as DISABLED";
$skipped++;
$skipped{$why}++;
$teststat[$n]=$why; # store reason for this test case
next;
}
$TESTCASES .= " $n";
}
}
else {
my $verified="";
map {
if (-e "$TESTDIR/test$_") {
$verified.="$_ ";
}
} split(" ", $TESTCASES);
if($verified eq "") {
print "No existing test cases were specified\n";
exit;
}
$TESTCASES = $verified;
}
#######################################################################
# Start the command line log
#
open(CMDLOG, ">$CURLLOG") ||
logmsg "can't log command lines to $CURLLOG\n";
#######################################################################
# Display the contents of the given file. Line endings are canonicalized
# and excessively long files are elided
sub displaylogcontent {
my ($file)=@_;
if(open(SINGLE, "<$file")) {
my $linecount = 0;
my $truncate;
my @tail;
while(my $string = <SINGLE>) {
$string =~ s/\r\n/\n/g;
$string =~ s/[\r\f\032]/\n/g;
$string .= "\n" unless ($string =~ /\n$/);
$string =~ tr/\n//;
for my $line (split("\n", $string)) {
$line =~ s/\s*\!$//;
if ($truncate) {
push @tail, " $line\n";
} else {
logmsg " $line\n";
}
$linecount++;
$truncate = $linecount > 1000;
}
}
if(@tail) {
my $tailshow = 200;
my $tailskip = 0;
my $tailtotal = scalar @tail;
if($tailtotal > $tailshow) {
$tailskip = $tailtotal - $tailshow;
logmsg "=== File too long: $tailskip lines omitted here\n";
}
for($tailskip .. $tailtotal-1) {
logmsg "$tail[$_]";
}
}
close(SINGLE);
}
}
sub displaylogs {
my ($testnum)=@_;
opendir(DIR, "$LOGDIR") ||
die "can't open dir: $!";
my @logs = readdir(DIR);
closedir(DIR);
logmsg "== Contents of files in the $LOGDIR/ dir after test $testnum\n";
foreach my $log (sort @logs) {
if($log =~ /\.(\.|)$/) {
next; # skip "." and ".."
}
if($log =~ /^\.nfs/) {
next; # skip ".nfs"
}
if(($log eq "memdump") || ($log eq "core")) {
next; # skip "memdump" and "core"
}
if((-d "$LOGDIR/$log") || (! -s "$LOGDIR/$log")) {
next; # skip directory and empty files
}
if(($log =~ /^stdout\d+/) && ($log !~ /^stdout$testnum/)) {
next; # skip stdoutNnn of other tests
}
if(($log =~ /^stderr\d+/) && ($log !~ /^stderr$testnum/)) {
next; # skip stderrNnn of other tests
}
if(($log =~ /^upload\d+/) && ($log !~ /^upload$testnum/)) {
next; # skip uploadNnn of other tests
}
if(($log =~ /^curl\d+\.out/) && ($log !~ /^curl$testnum\.out/)) {
next; # skip curlNnn.out of other tests
}
if(($log =~ /^test\d+\.txt/) && ($log !~ /^test$testnum\.txt/)) {
next; # skip testNnn.txt of other tests
}
if(($log =~ /^file\d+\.txt/) && ($log !~ /^file$testnum\.txt/)) {
next; # skip fileNnn.txt of other tests
}
if(($log =~ /^netrc\d+/) && ($log !~ /^netrc$testnum/)) {
next; # skip netrcNnn of other tests
}
if(($log =~ /^trace\d+/) && ($log !~ /^trace$testnum/)) {
next; # skip traceNnn of other tests
}
if(($log =~ /^valgrind\d+/) && ($log !~ /^valgrind$testnum(\..*|)$/)) {
next; # skip valgrindNnn of other tests
}
logmsg "=== Start of file $log\n";
displaylogcontent("$LOGDIR/$log");
logmsg "=== End of file $log\n";
}
}
#######################################################################
# The main test-loop
#
my $failed;
my $testnum;
my $ok=0;
my $total=0;
my $lasttest=0;
my @at = split(" ", $TESTCASES);
my $count=0;
$start = time();
foreach $testnum (@at) {
$lasttest = $testnum if($testnum > $lasttest);
$count++;
my $error = singletest($run_event_based, $testnum, $count, scalar(@at));
if($error < 0) {
# not a test we can run
next;
}
$total++; # number of tests we've run
if($error>0) {
$failed.= "$testnum ";
if($postmortem) {
# display all files in log/ in a nice way
displaylogs($testnum);
}
if(!$anyway) {
# a test failed, abort
logmsg "\n - abort tests\n";
last;
}
}
elsif(!$error) {
$ok++; # successful test counter
}
# loop for next test
}
my $sofar = time() - $start;
#######################################################################
# Close command log
#
close(CMDLOG);
# Tests done, stop the servers
stopservers($verbose);
my $all = $total + $skipped;
runtimestats($lasttest);
if($total) {
logmsg sprintf("TESTDONE: $ok tests out of $total reported OK: %d%%\n",
$ok/$total*100);
if($ok != $total) {
logmsg "TESTFAIL: These test cases failed: $failed\n";
}
}
else {
logmsg "TESTFAIL: No tests were performed\n";
}
if($all) {
logmsg "TESTDONE: $all tests were considered during ".
sprintf("%.0f", $sofar) ." seconds.\n";
}
if($skipped && !$short) {
my $s=0;
logmsg "TESTINFO: $skipped tests were skipped due to these restraints:\n";
for(keys %skipped) {
my $r = $_;
printf "TESTINFO: \"%s\" %d times (", $r, $skipped{$_};
# now show all test case numbers that had this reason for being
# skipped
my $c=0;
my $max = 9;
for(0 .. scalar @teststat) {
my $t = $_;
if($teststat[$_] && ($teststat[$_] eq $r)) {
if($c < $max) {
logmsg ", " if($c);
logmsg $_;
}
$c++;
}
}
if($c > $max) {
logmsg " and ".($c-$max)." more";
}
logmsg ")\n";
}
}
if($total && ($ok != $total)) {
exit 1;
}
Reference in New Issue View Git Blame Copy Permalink