mirror of
https://github.com/moparisthebest/curl
synced 2024-11-05 00:55:04 -05:00
b5c3feda17
A shared library tests/libtest/.libs/lihostname.so is preloaded in NTLM test-cases to override the system implementation of gethostname(). It makes it possible to test the NTLM authentication for exact match, and this way test the implementation of MD4 and DES. If LD_PRELOAD doesn't work, a debug build willl also workk as debug builds are now made to prefer a specific environment variable and will then return that content as host name instead of the actual one. Kamil wrote the bulk of this, Daniel Stenberg polished it.
4075 lines
124 KiB
Perl
Executable File
4075 lines
124 KiB
Perl
Executable File
#!/usr/bin/env perl
|
|
#***************************************************************************
|
|
# _ _ ____ _
|
|
# Project ___| | | | _ \| |
|
|
# / __| | | | |_) | |
|
|
# | (__| |_| | _ <| |___
|
|
# \___|\___/|_| \_\_____|
|
|
#
|
|
# Copyright (C) 1998 - 2010, Daniel Stenberg, <daniel@haxx.se>, et al.
|
|
#
|
|
# This software is licensed as described in the file COPYING, which
|
|
# you should have received as part of this distribution. The terms
|
|
# are also available at http://curl.haxx.se/docs/copyright.html.
|
|
#
|
|
# You may opt to use, copy, modify, merge, publish, distribute and/or sell
|
|
# copies of the Software, and permit persons to whom the Software is
|
|
# furnished to do so, under the terms of the COPYING file.
|
|
#
|
|
# This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
# KIND, either express or implied.
|
|
#
|
|
###########################################################################
|
|
|
|
# Experimental hooks are available to run tests remotely on machines that
|
|
# are able to run curl but are unable to run the test harness.
|
|
# The following sections need to be modified:
|
|
#
|
|
# $HOSTIP, $HOST6IP - Set to the address of the host running the test suite
|
|
# $CLIENTIP, $CLIENT6IP - Set to the address of the host running curl
|
|
# runclient, runclientoutput - Modify to copy all the files in the log/
|
|
# directory to the system running curl, run the given command remotely
|
|
# and save the return code or returned stdout (respectively), then
|
|
# copy all the files from the remote system's log/ directory back to
|
|
# the host running the test suite. This can be done a few ways, such
|
|
# as using scp & ssh, rsync & telnet, or using a NFS shared directory
|
|
# and ssh.
|
|
#
|
|
# 'make && make test' needs to be done on both machines before making the
|
|
# above changes and running runtests.pl manually. In the shared NFS case,
|
|
# the contents of the tests/server/ directory must be from the host
|
|
# running the test suite, while the rest must be from the host running curl.
|
|
#
|
|
# Note that even with these changes a number of tests will still fail (mainly
|
|
# to do with cookies, those that set environment variables, or those that
|
|
# do more than touch the file system in a <precheck> or <postcheck>
|
|
# section). These can be added to the $TESTCASES line below,
|
|
# e.g. $TESTCASES="!8 !31 !63 !cookies..."
|
|
#
|
|
# Finally, to properly support -g and -n, checktestcmd needs to change
|
|
# to check the remote system's PATH, and the places in the code where
|
|
# the curl binary is read directly to determine its type also need to be
|
|
# fixed. As long as the -g option is never given, and the -n is always
|
|
# given, this won't be a problem.
|
|
|
|
|
|
# These should be the only variables that might be needed to get edited:
|
|
|
|
BEGIN {
|
|
@INC=(@INC, $ENV{'srcdir'}, ".");
|
|
# run time statistics needs Time::HiRes
|
|
eval {
|
|
no warnings "all";
|
|
require Time::HiRes;
|
|
import Time::HiRes qw( time );
|
|
}
|
|
}
|
|
|
|
use strict;
|
|
use warnings;
|
|
use Cwd;
|
|
|
|
# Subs imported from serverhelp module
|
|
use serverhelp qw(
|
|
serverfactors
|
|
servername_id
|
|
servername_str
|
|
servername_canon
|
|
server_pidfilename
|
|
server_logfilename
|
|
);
|
|
|
|
# Variables and subs imported from sshhelp module
|
|
use sshhelp qw(
|
|
$sshdexe
|
|
$sshexe
|
|
$sftpexe
|
|
$sshconfig
|
|
$sftpconfig
|
|
$sshdlog
|
|
$sshlog
|
|
$sftplog
|
|
$sftpcmds
|
|
display_sshdconfig
|
|
display_sshconfig
|
|
display_sftpconfig
|
|
display_sshdlog
|
|
display_sshlog
|
|
display_sftplog
|
|
exe_ext
|
|
find_sshd
|
|
find_ssh
|
|
find_sftp
|
|
sshversioninfo
|
|
);
|
|
|
|
require "getpart.pm"; # array functions
|
|
require "valgrind.pm"; # valgrind report parser
|
|
require "ftp.pm";
|
|
|
|
my $HOSTIP="127.0.0.1"; # address on which the test server listens
|
|
my $HOST6IP="[::1]"; # address on which the test server listens
|
|
my $CLIENTIP="127.0.0.1"; # address which curl uses for incoming connections
|
|
my $CLIENT6IP="[::1]"; # address which curl uses for incoming connections
|
|
|
|
my $base = 8990; # base port number
|
|
|
|
my $HTTPPORT; # HTTP server port
|
|
my $HTTP6PORT; # HTTP IPv6 server port
|
|
my $HTTPSPORT; # HTTPS server port
|
|
my $FTPPORT; # FTP server port
|
|
my $FTP2PORT; # FTP server 2 port
|
|
my $FTPSPORT; # FTPS server port
|
|
my $FTP6PORT; # FTP IPv6 server port
|
|
my $TFTPPORT; # TFTP
|
|
my $TFTP6PORT; # TFTP
|
|
my $SSHPORT; # SCP/SFTP
|
|
my $SOCKSPORT; # SOCKS4/5 port
|
|
my $POP3PORT; # POP3
|
|
my $POP36PORT; # POP3 IPv6 server port
|
|
my $IMAPPORT; # IMAP
|
|
my $IMAP6PORT; # IMAP IPv6 server port
|
|
my $SMTPPORT; # SMTP
|
|
my $SMTP6PORT; # SMTP IPv6 server port
|
|
my $RTSPPORT; # RTSP
|
|
my $RTSP6PORT; # RTSP IPv6 server port
|
|
|
|
my $srcdir = $ENV{'srcdir'} || '.';
|
|
my $CURL="../src/curl".exe_ext(); # what curl executable to run on the tests
|
|
my $VCURL=$CURL; # what curl binary to use to verify the servers with
|
|
# VCURL is handy to set to the system one when the one you
|
|
# just built hangs or crashes and thus prevent verification
|
|
my $DBGCURL=$CURL; #"../src/.libs/curl"; # alternative for debugging
|
|
my $LOGDIR="log";
|
|
my $TESTDIR="$srcdir/data";
|
|
my $LIBDIR="./libtest";
|
|
my $SERVERIN="$LOGDIR/server.input"; # what curl sent the server
|
|
my $SERVER2IN="$LOGDIR/server2.input"; # what curl sent the second server
|
|
my $CURLLOG="$LOGDIR/curl.log"; # all command lines run
|
|
my $FTPDCMD="$LOGDIR/ftpserver.cmd"; # copy ftp server instructions here
|
|
my $SERVERLOGS_LOCK="$LOGDIR/serverlogs.lock"; # server logs advisor read lock
|
|
my $CURLCONFIG="../curl-config"; # curl-config from current build
|
|
|
|
# Normally, all test cases should be run, but at times it is handy to
|
|
# simply run a particular one:
|
|
my $TESTCASES="all";
|
|
|
|
# To run specific test cases, set them like:
|
|
# $TESTCASES="1 2 3 7 8";
|
|
|
|
#######################################################################
|
|
# No variables below this point should need to be modified
|
|
#
|
|
|
|
# invoke perl like this:
|
|
my $perl="perl -I$srcdir";
|
|
my $server_response_maxtime=13;
|
|
|
|
my $debug_build=0; # curl built with --enable-debug
|
|
my $curl_debug=0; # curl built with --enable-curldebug (memory tracking)
|
|
my $libtool;
|
|
|
|
# name of the file that the memory debugging creates:
|
|
my $memdump="$LOGDIR/memdump";
|
|
|
|
# the path to the script that analyzes the memory debug output file:
|
|
my $memanalyze="$perl $srcdir/memanalyze.pl";
|
|
|
|
my $pwd = getcwd(); # current working directory
|
|
|
|
my $start;
|
|
my $forkserver=0;
|
|
my $ftpchecktime=1; # time it took to verify our test FTP server
|
|
|
|
my $stunnel = checkcmd("stunnel4") || checkcmd("stunnel");
|
|
my $valgrind = checktestcmd("valgrind");
|
|
my $valgrind_logfile="--logfile";
|
|
my $valgrind_tool;
|
|
my $gdb = checktestcmd("gdb");
|
|
|
|
my $ssl_version; # set if libcurl is built with SSL support
|
|
my $large_file; # set if libcurl is built with large file support
|
|
my $has_idn; # set if libcurl is built with IDN support
|
|
my $http_ipv6; # set if HTTP server has IPv6 support
|
|
my $ftp_ipv6; # set if FTP server has IPv6 support
|
|
my $tftp_ipv6; # set if TFTP server has IPv6 support
|
|
my $has_ipv6; # set if libcurl is built with IPv6 support
|
|
my $has_libz; # set if libcurl is built with libz support
|
|
my $has_getrlimit; # set if system has getrlimit()
|
|
my $has_ntlm; # set if libcurl is built with NTLM support
|
|
my $has_charconv;# set if libcurl is built with CharConv support
|
|
|
|
my $has_openssl; # built with a lib using an OpenSSL-like API
|
|
my $has_gnutls; # built with GnuTLS
|
|
my $has_nss; # built with NSS
|
|
my $has_yassl; # built with yassl
|
|
my $has_polarssl;# built with polarssl
|
|
|
|
my $has_shared; # built shared
|
|
|
|
my $ssllib; # name of the lib we use (for human presentation)
|
|
my $has_crypto; # set if libcurl is built with cryptographic support
|
|
my $has_textaware; # set if running on a system that has a text mode concept
|
|
# on files. Windows for example
|
|
my @protocols; # array of supported protocols
|
|
|
|
my $skipped=0; # number of tests skipped; reported in main loop
|
|
my %skipped; # skipped{reason}=counter, reasons for skip
|
|
my @teststat; # teststat[testnum]=reason, reasons for skip
|
|
my %disabled_keywords; # key words of tests to skip
|
|
my %enabled_keywords; # key words of tests to run
|
|
|
|
my $sshdid; # for socks server, ssh daemon version id
|
|
my $sshdvernum; # for socks server, ssh daemon version number
|
|
my $sshdverstr; # for socks server, ssh daemon version string
|
|
my $sshderror; # for socks server, ssh daemon version error
|
|
|
|
my $defserverlogslocktimeout = 20; # timeout to await server logs lock removal
|
|
my $defpostcommanddelay = 0; # delay between command and postcheck sections
|
|
|
|
my $timestats; # time stamping and stats generation
|
|
my $fullstats; # show time stats for every single test
|
|
my %timeprepini; # timestamp for each test preparation start
|
|
my %timesrvrini; # timestamp for each test required servers verification start
|
|
my %timesrvrend; # timestamp for each test required servers verification end
|
|
my %timetoolini; # timestamp for each test command run starting
|
|
my %timetoolend; # timestamp for each test command run stopping
|
|
my %timesrvrlog; # timestamp for each test server logs lock removal
|
|
my %timevrfyend; # timestamp for each test result verification end
|
|
|
|
my $testnumcheck; # test number, set in singletest sub.
|
|
|
|
#######################################################################
|
|
# variables the command line options may set
|
|
#
|
|
|
|
my $short;
|
|
my $verbose;
|
|
my $debugprotocol;
|
|
my $anyway;
|
|
my $gdbthis; # run test case with gdb debugger
|
|
my $keepoutfiles; # keep stdout and stderr files after tests
|
|
my $listonly; # only list the tests
|
|
my $postmortem; # display detailed info about failed tests
|
|
|
|
my %run; # running server
|
|
my %doesntrun; # servers that don't work, identified by pidfile
|
|
my %serverpidfile;# all server pid file names, identified by server id
|
|
my %runcert; # cert file currently in use by an ssl running server
|
|
|
|
# torture test variables
|
|
my $torture;
|
|
my $tortnum;
|
|
my $tortalloc;
|
|
|
|
#######################################################################
|
|
# logmsg is our general message logging subroutine.
|
|
#
|
|
sub logmsg {
|
|
for(@_) {
|
|
print "$_";
|
|
}
|
|
}
|
|
|
|
# get the name of the current user
|
|
my $USER = $ENV{USER}; # Linux
|
|
if (!$USER) {
|
|
$USER = $ENV{USERNAME}; # Windows
|
|
if (!$USER) {
|
|
$USER = $ENV{LOGNAME}; # Some UNIX (I think)
|
|
}
|
|
}
|
|
|
|
# enable memory debugging if curl is compiled with it
|
|
$ENV{'CURL_MEMDEBUG'} = $memdump;
|
|
$ENV{'HOME'}=$pwd;
|
|
|
|
sub catch_zap {
|
|
my $signame = shift;
|
|
logmsg "runtests.pl received SIG$signame, exiting\n";
|
|
stopservers($verbose);
|
|
die "Somebody sent me a SIG$signame";
|
|
}
|
|
$SIG{INT} = \&catch_zap;
|
|
$SIG{TERM} = \&catch_zap;
|
|
|
|
##########################################################################
|
|
# Clear all possible '*_proxy' environment variables for various protocols
|
|
# to prevent them to interfere with our testing!
|
|
|
|
my $protocol;
|
|
foreach $protocol (('ftp', 'http', 'ftps', 'https', 'no')) {
|
|
my $proxy = "${protocol}_proxy";
|
|
# clear lowercase version
|
|
delete $ENV{$proxy} if($ENV{$proxy});
|
|
# clear uppercase version
|
|
delete $ENV{uc($proxy)} if($ENV{uc($proxy)});
|
|
}
|
|
|
|
# make sure we don't get affected by other variables that control our
|
|
# behaviour
|
|
|
|
delete $ENV{'SSL_CERT_DIR'} if($ENV{'SSL_CERT_DIR'});
|
|
delete $ENV{'SSL_CERT_PATH'} if($ENV{'SSL_CERT_PATH'});
|
|
delete $ENV{'CURL_CA_BUNDLE'} if($ENV{'CURL_CA_BUNDLE'});
|
|
|
|
#######################################################################
|
|
# Load serverpidfile hash with pidfile names for all possible servers.
|
|
#
|
|
sub init_serverpidfile_hash {
|
|
for my $proto (('ftp', 'http', 'imap', 'pop3', 'smtp')) {
|
|
for my $ssl (('', 's')) {
|
|
for my $ipvnum ((4, 6)) {
|
|
for my $idnum ((1, 2)) {
|
|
my $serv = servername_id("$proto$ssl", $ipvnum, $idnum);
|
|
my $pidf = server_pidfilename("$proto$ssl", $ipvnum, $idnum);
|
|
$serverpidfile{$serv} = $pidf;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
for my $proto (('tftp', 'sftp', 'socks', 'ssh', 'rtsp')) {
|
|
for my $ipvnum ((4, 6)) {
|
|
for my $idnum ((1, 2)) {
|
|
my $serv = servername_id($proto, $ipvnum, $idnum);
|
|
my $pidf = server_pidfilename($proto, $ipvnum, $idnum);
|
|
$serverpidfile{$serv} = $pidf;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
#######################################################################
|
|
# Check if a given child process has just died. Reaps it if so.
|
|
#
|
|
sub checkdied {
|
|
use POSIX ":sys_wait_h";
|
|
my $pid = $_[0];
|
|
if(not defined $pid || $pid <= 0) {
|
|
return 0;
|
|
}
|
|
my $rc = waitpid($pid, &WNOHANG);
|
|
return ($rc == $pid)?1:0;
|
|
}
|
|
|
|
#######################################################################
|
|
# Start a new thread/process and run the given command line in there.
|
|
# Return the pids (yes plural) of the new child process to the parent.
|
|
#
|
|
sub startnew {
|
|
my ($cmd, $pidfile, $timeout, $fake)=@_;
|
|
|
|
logmsg "startnew: $cmd\n" if ($verbose);
|
|
|
|
my $child = fork();
|
|
my $pid2 = 0;
|
|
|
|
if(not defined $child) {
|
|
logmsg "startnew: fork() failure detected\n";
|
|
return (-1,-1);
|
|
}
|
|
|
|
if(0 == $child) {
|
|
# Here we are the child. Run the given command.
|
|
|
|
# Put an "exec" in front of the command so that the child process
|
|
# keeps this child's process ID.
|
|
exec("exec $cmd") || die "Can't exec() $cmd: $!";
|
|
|
|
# exec() should never return back here to this process. We protect
|
|
# ourselves by calling die() just in case something goes really bad.
|
|
die "error: exec() has returned";
|
|
}
|
|
|
|
# Ugly hack but ssh client doesn't support pid files
|
|
if ($fake) {
|
|
if(open(OUT, ">$pidfile")) {
|
|
print OUT $child . "\n";
|
|
close(OUT);
|
|
logmsg "startnew: $pidfile faked with pid=$child\n" if($verbose);
|
|
}
|
|
else {
|
|
logmsg "startnew: failed to write fake $pidfile with pid=$child\n";
|
|
}
|
|
# could/should do a while connect fails sleep a bit and loop
|
|
sleep $timeout;
|
|
if (checkdied($child)) {
|
|
logmsg "startnew: child process has failed to start\n" if($verbose);
|
|
return (-1,-1);
|
|
}
|
|
}
|
|
|
|
my $count = $timeout;
|
|
while($count--) {
|
|
if(-f $pidfile && -s $pidfile && open(PID, "<$pidfile")) {
|
|
$pid2 = 0 + <PID>;
|
|
close(PID);
|
|
if(($pid2 > 0) && kill(0, $pid2)) {
|
|
# if $pid2 is valid, then make sure this pid is alive, as
|
|
# otherwise it is just likely to be the _previous_ pidfile or
|
|
# similar!
|
|
last;
|
|
}
|
|
# invalidate $pid2 if not actually alive
|
|
$pid2 = 0;
|
|
}
|
|
if (checkdied($child)) {
|
|
logmsg "startnew: child process has died, server might start up\n"
|
|
if($verbose);
|
|
# We can't just abort waiting for the server with a
|
|
# return (-1,-1);
|
|
# because the server might have forked and could still start
|
|
# up normally. Instead, just reduce the amount of time we remain
|
|
# waiting.
|
|
$count >>= 2;
|
|
}
|
|
sleep(1);
|
|
}
|
|
|
|
# Return two PIDs, the one for the child process we spawned and the one
|
|
# reported by the server itself (in case it forked again on its own).
|
|
# Both (potentially) need to be killed at the end of the test.
|
|
return ($child, $pid2);
|
|
}
|
|
|
|
|
|
#######################################################################
|
|
# Check for a command in the PATH of the test server.
|
|
#
|
|
sub checkcmd {
|
|
my ($cmd)=@_;
|
|
my @paths=(split(":", $ENV{'PATH'}), "/usr/sbin", "/usr/local/sbin",
|
|
"/sbin", "/usr/bin", "/usr/local/bin",
|
|
"./libtest/.libs", "./libtest");
|
|
for(@paths) {
|
|
if( -x "$_/$cmd" && ! -d "$_/$cmd") {
|
|
# executable bit but not a directory!
|
|
return "$_/$cmd";
|
|
}
|
|
}
|
|
}
|
|
|
|
#######################################################################
|
|
# Get the list of tests that the tests/data/Makefile.am knows about!
|
|
#
|
|
my $disttests;
|
|
sub get_disttests {
|
|
my @dist = `cd data && make show`;
|
|
$disttests = join("", @dist);
|
|
}
|
|
|
|
#######################################################################
|
|
# Check for a command in the PATH of the machine running curl.
|
|
#
|
|
sub checktestcmd {
|
|
my ($cmd)=@_;
|
|
return checkcmd($cmd);
|
|
}
|
|
|
|
#######################################################################
|
|
# Run the application under test and return its return code
|
|
#
|
|
sub runclient {
|
|
my ($cmd)=@_;
|
|
return system($cmd);
|
|
|
|
# This is one way to test curl on a remote machine
|
|
# my $out = system("ssh $CLIENTIP cd \'$pwd\' \\; \'$cmd\'");
|
|
# sleep 2; # time to allow the NFS server to be updated
|
|
# return $out;
|
|
}
|
|
|
|
#######################################################################
|
|
# Run the application under test and return its stdout
|
|
#
|
|
sub runclientoutput {
|
|
my ($cmd)=@_;
|
|
return `$cmd`;
|
|
|
|
# This is one way to test curl on a remote machine
|
|
# my @out = `ssh $CLIENTIP cd \'$pwd\' \\; \'$cmd\'`;
|
|
# sleep 2; # time to allow the NFS server to be updated
|
|
# return @out;
|
|
}
|
|
|
|
#######################################################################
|
|
# Memory allocation test and failure torture testing.
|
|
#
|
|
sub torture {
|
|
my $testcmd = shift;
|
|
my $gdbline = shift;
|
|
|
|
# remove memdump first to be sure we get a new nice and clean one
|
|
unlink($memdump);
|
|
|
|
# First get URL from test server, ignore the output/result
|
|
runclient($testcmd);
|
|
|
|
logmsg " CMD: $testcmd\n" if($verbose);
|
|
|
|
# memanalyze -v is our friend, get the number of allocations made
|
|
my $count=0;
|
|
my @out = `$memanalyze -v $memdump`;
|
|
for(@out) {
|
|
if(/^Allocations: (\d+)/) {
|
|
$count = $1;
|
|
last;
|
|
}
|
|
}
|
|
if(!$count) {
|
|
logmsg " found no allocs to make fail\n";
|
|
return 0;
|
|
}
|
|
|
|
logmsg " $count allocations to make fail\n";
|
|
|
|
for ( 1 .. $count ) {
|
|
my $limit = $_;
|
|
my $fail;
|
|
my $dumped_core;
|
|
|
|
if($tortalloc && ($tortalloc != $limit)) {
|
|
next;
|
|
}
|
|
|
|
if($verbose) {
|
|
my ($sec,$min,$hour,$mday,$mon,$year,$wday,$yday,$isdst) =
|
|
localtime(time());
|
|
my $now = sprintf("%02d:%02d:%02d ", $hour, $min, $sec);
|
|
logmsg "Fail alloc no: $limit at $now\r";
|
|
}
|
|
|
|
# make the memory allocation function number $limit return failure
|
|
$ENV{'CURL_MEMLIMIT'} = $limit;
|
|
|
|
# remove memdump first to be sure we get a new nice and clean one
|
|
unlink($memdump);
|
|
|
|
logmsg "*** Alloc number $limit is now set to fail ***\n" if($gdbthis);
|
|
|
|
my $ret = 0;
|
|
if($gdbthis) {
|
|
runclient($gdbline)
|
|
}
|
|
else {
|
|
$ret = runclient($testcmd);
|
|
}
|
|
#logmsg "$_ Returned " . $ret >> 8 . "\n";
|
|
|
|
# Now clear the variable again
|
|
delete $ENV{'CURL_MEMLIMIT'} if($ENV{'CURL_MEMLIMIT'});
|
|
|
|
if(-r "core") {
|
|
# there's core file present now!
|
|
logmsg " core dumped\n";
|
|
$dumped_core = 1;
|
|
$fail = 2;
|
|
}
|
|
|
|
# verify that it returns a proper error code, doesn't leak memory
|
|
# and doesn't core dump
|
|
if($ret & 255) {
|
|
logmsg " system() returned $ret\n";
|
|
$fail=1;
|
|
}
|
|
else {
|
|
my @memdata=`$memanalyze $memdump`;
|
|
my $leak=0;
|
|
for(@memdata) {
|
|
if($_ ne "") {
|
|
# well it could be other memory problems as well, but
|
|
# we call it leak for short here
|
|
$leak=1;
|
|
}
|
|
}
|
|
if($leak) {
|
|
logmsg "** MEMORY FAILURE\n";
|
|
logmsg @memdata;
|
|
logmsg `$memanalyze -l $memdump`;
|
|
$fail = 1;
|
|
}
|
|
}
|
|
if($fail) {
|
|
logmsg " Failed on alloc number $limit in test.\n",
|
|
" invoke with \"-t$limit\" to repeat this single case.\n";
|
|
stopservers($verbose);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
logmsg "torture OK\n";
|
|
return 0;
|
|
}
|
|
|
|
#######################################################################
|
|
# Stop a test server along with pids which aren't in the %run hash yet.
|
|
# This also stops all servers which are relative to the given one.
|
|
#
|
|
sub stopserver {
|
|
my ($server, $pidlist) = @_;
|
|
#
|
|
# kill sockfilter processes for pingpong relative server
|
|
#
|
|
if($server =~ /^(ftp|imap|pop3|smtp)s?(\d*)(-ipv6|)$/) {
|
|
my $proto = $1;
|
|
my $idnum = ($2 && ($2 > 1)) ? $2 : 1;
|
|
my $ipvnum = ($3 && ($3 =~ /6$/)) ? 6 : 4;
|
|
killsockfilters($proto, $ipvnum, $idnum, $verbose);
|
|
}
|
|
#
|
|
# All servers relative to the given one must be stopped also
|
|
#
|
|
my @killservers;
|
|
if($server =~ /^(ftp|http|imap|pop3|smtp)s(.*)$/) {
|
|
# given an ssl server, also kill non-ssl underlying one
|
|
push @killservers, "${1}${2}";
|
|
}
|
|
elsif($server =~ /^(ftp|http|imap|pop3|smtp)(.*)$/) {
|
|
# given a non-ssl server, also kill ssl piggybacking one
|
|
push @killservers, "${1}s${2}";
|
|
}
|
|
elsif($server =~ /^(socks)(.*)$/) {
|
|
# given an socks server, also kill ssh underlying one
|
|
push @killservers, "ssh${2}";
|
|
}
|
|
elsif($server =~ /^(ssh)(.*)$/) {
|
|
# given an ssh server, also kill socks piggybacking one
|
|
push @killservers, "socks${2}";
|
|
}
|
|
push @killservers, $server;
|
|
#
|
|
# kill given pids and server relative ones clearing them in %run hash
|
|
#
|
|
foreach my $server (@killservers) {
|
|
if($run{$server}) {
|
|
$pidlist .= "$run{$server} ";
|
|
$run{$server} = 0;
|
|
}
|
|
$runcert{$server} = 0 if($runcert{$server});
|
|
}
|
|
killpid($verbose, $pidlist);
|
|
#
|
|
# cleanup server pid files
|
|
#
|
|
foreach my $server (@killservers) {
|
|
my $pidfile = $serverpidfile{$server};
|
|
my $pid = processexists($pidfile);
|
|
if($pid > 0) {
|
|
logmsg "Warning: $server server unexpectedly alive\n";
|
|
killpid($verbose, $pid);
|
|
}
|
|
unlink($pidfile) if(-f $pidfile);
|
|
}
|
|
}
|
|
|
|
#######################################################################
|
|
# Verify that the server that runs on $ip, $port is our server. This also
|
|
# implies that we can speak with it, as there might be occasions when the
|
|
# server runs fine but we cannot talk to it ("Failed to connect to ::1: Can't
|
|
# assign requested address" #
|
|
|
|
sub verifyhttp {
|
|
my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
|
|
my $server = servername_id($proto, $ipvnum, $idnum);
|
|
my $pid = 0;
|
|
|
|
my $verifyout = "$LOGDIR/".
|
|
servername_canon($proto, $ipvnum, $idnum) .'_verify.out';
|
|
unlink($verifyout) if(-f $verifyout);
|
|
|
|
my $verifylog = "$LOGDIR/".
|
|
servername_canon($proto, $ipvnum, $idnum) .'_verify.log';
|
|
unlink($verifylog) if(-f $verifylog);
|
|
|
|
my $flags = "--max-time $server_response_maxtime ";
|
|
$flags .= "--output $verifyout ";
|
|
$flags .= "--silent ";
|
|
$flags .= "--verbose ";
|
|
$flags .= "--globoff ";
|
|
$flags .= "--insecure " if($proto eq 'https');
|
|
$flags .= "\"$proto://$ip:$port/verifiedserver\"";
|
|
|
|
my $cmd = "$VCURL $flags 2>$verifylog";
|
|
|
|
# verify if our/any server is running on this port
|
|
logmsg "RUN: $cmd\n" if($verbose);
|
|
my $res = runclient($cmd);
|
|
|
|
$res >>= 8; # rotate the result
|
|
if($res & 128) {
|
|
logmsg "RUN: curl command died with a coredump\n";
|
|
return -1;
|
|
}
|
|
|
|
if($res && $verbose) {
|
|
logmsg "RUN: curl command returned $res\n";
|
|
if(open(FILE, "<$verifylog")) {
|
|
while(my $string = <FILE>) {
|
|
logmsg "RUN: $string" if($string !~ /^([ \t]*)$/);
|
|
}
|
|
close(FILE);
|
|
}
|
|
}
|
|
|
|
my $data;
|
|
if(open(FILE, "<$verifyout")) {
|
|
while(my $string = <FILE>) {
|
|
$data = $string;
|
|
last; # only want first line
|
|
}
|
|
close(FILE);
|
|
}
|
|
|
|
if($data && ($data =~ /WE ROOLZ: (\d+)/)) {
|
|
$pid = 0+$1;
|
|
}
|
|
elsif($res == 6) {
|
|
# curl: (6) Couldn't resolve host '::1'
|
|
logmsg "RUN: failed to resolve host ($proto://$ip:$port/verifiedserver)\n";
|
|
return -1;
|
|
}
|
|
elsif($data || ($res != 7)) {
|
|
logmsg "RUN: Unknown server on our $server port: $port\n";
|
|
return -1;
|
|
}
|
|
return $pid;
|
|
}
|
|
|
|
#######################################################################
|
|
# Verify that the server that runs on $ip, $port is our server. This also
|
|
# implies that we can speak with it, as there might be occasions when the
|
|
# server runs fine but we cannot talk to it ("Failed to connect to ::1: Can't
|
|
# assign requested address" #
|
|
|
|
sub verifyftp {
|
|
my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
|
|
my $server = servername_id($proto, $ipvnum, $idnum);
|
|
my $pid = 0;
|
|
my $time=time();
|
|
my $extra="";
|
|
|
|
my $verifylog = "$LOGDIR/".
|
|
servername_canon($proto, $ipvnum, $idnum) .'_verify.log';
|
|
unlink($verifylog) if(-f $verifylog);
|
|
|
|
if($proto eq "ftps") {
|
|
$extra .= "--insecure --ftp-ssl-control ";
|
|
}
|
|
elsif($proto eq "smtp") {
|
|
# SMTP is a bit different since it requires more options and it
|
|
# has _no_ output!
|
|
$extra .= "--mail-rcpt verifiedserver ";
|
|
$extra .= "--mail-from fake ";
|
|
$extra .= "--upload /dev/null ";
|
|
$extra .= "--stderr - "; # move stderr to parse the verbose stuff
|
|
}
|
|
|
|
my $flags = "--max-time $server_response_maxtime ";
|
|
$flags .= "--silent ";
|
|
$flags .= "--verbose ";
|
|
$flags .= "--globoff ";
|
|
$flags .= $extra;
|
|
$flags .= "\"$proto://$ip:$port/verifiedserver\"";
|
|
|
|
my $cmd = "$VCURL $flags 2>$verifylog";
|
|
|
|
# check if this is our server running on this port:
|
|
logmsg "RUN: $cmd\n" if($verbose);
|
|
my @data = runclientoutput($cmd);
|
|
|
|
my $res = $? >> 8; # rotate the result
|
|
if($res & 128) {
|
|
logmsg "RUN: curl command died with a coredump\n";
|
|
return -1;
|
|
}
|
|
|
|
foreach my $line (@data) {
|
|
if($line =~ /WE ROOLZ: (\d+)/) {
|
|
# this is our test server with a known pid!
|
|
$pid = 0+$1;
|
|
last;
|
|
}
|
|
}
|
|
if($pid <= 0 && @data && $data[0]) {
|
|
# this is not a known server
|
|
logmsg "RUN: Unknown server on our $server port: $port\n";
|
|
return 0;
|
|
}
|
|
# we can/should use the time it took to verify the FTP server as a measure
|
|
# on how fast/slow this host/FTP is.
|
|
my $took = int(0.5+time()-$time);
|
|
|
|
if($verbose) {
|
|
logmsg "RUN: Verifying our test $server server took $took seconds\n";
|
|
}
|
|
$ftpchecktime = $took>=1?$took:1; # make sure it never is below 1
|
|
|
|
return $pid;
|
|
}
|
|
|
|
#######################################################################
|
|
# Verify that the server that runs on $ip, $port is our server. This also
|
|
# implies that we can speak with it, as there might be occasions when the
|
|
# server runs fine but we cannot talk to it ("Failed to connect to ::1: Can't
|
|
# assign requested address" #
|
|
|
|
sub verifyrtsp {
|
|
my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
|
|
my $server = servername_id($proto, $ipvnum, $idnum);
|
|
my $pid = 0;
|
|
|
|
my $verifyout = "$LOGDIR/".
|
|
servername_canon($proto, $ipvnum, $idnum) .'_verify.out';
|
|
unlink($verifyout) if(-f $verifyout);
|
|
|
|
my $verifylog = "$LOGDIR/".
|
|
servername_canon($proto, $ipvnum, $idnum) .'_verify.log';
|
|
unlink($verifylog) if(-f $verifylog);
|
|
|
|
my $flags = "--max-time $server_response_maxtime ";
|
|
$flags .= "--output $verifyout ";
|
|
$flags .= "--silent ";
|
|
$flags .= "--verbose ";
|
|
$flags .= "--globoff ";
|
|
# currently verification is done using http
|
|
$flags .= "\"http://$ip:$port/verifiedserver\"";
|
|
|
|
my $cmd = "$VCURL $flags 2>$verifylog";
|
|
|
|
# verify if our/any server is running on this port
|
|
logmsg "RUN: $cmd\n" if($verbose);
|
|
my $res = runclient($cmd);
|
|
|
|
$res >>= 8; # rotate the result
|
|
if($res & 128) {
|
|
logmsg "RUN: curl command died with a coredump\n";
|
|
return -1;
|
|
}
|
|
|
|
if($res && $verbose) {
|
|
logmsg "RUN: curl command returned $res\n";
|
|
if(open(FILE, "<$verifylog")) {
|
|
while(my $string = <FILE>) {
|
|
logmsg "RUN: $string" if($string !~ /^([ \t]*)$/);
|
|
}
|
|
close(FILE);
|
|
}
|
|
}
|
|
|
|
my $data;
|
|
if(open(FILE, "<$verifyout")) {
|
|
while(my $string = <FILE>) {
|
|
$data = $string;
|
|
last; # only want first line
|
|
}
|
|
close(FILE);
|
|
}
|
|
|
|
if($data && ($data =~ /RTSP_SERVER WE ROOLZ: (\d+)/)) {
|
|
$pid = 0+$1;
|
|
}
|
|
elsif($res == 6) {
|
|
# curl: (6) Couldn't resolve host '::1'
|
|
logmsg "RUN: failed to resolve host ($proto://$ip:$port/verifiedserver)\n";
|
|
return -1;
|
|
}
|
|
elsif($data || ($res != 7)) {
|
|
logmsg "RUN: Unknown server on our $server port: $port\n";
|
|
return -1;
|
|
}
|
|
return $pid;
|
|
}
|
|
|
|
#######################################################################
|
|
# Verify that the ssh server has written out its pidfile, recovering
|
|
# the pid from the file and returning it if a process with that pid is
|
|
# actually alive.
|
|
|
|
sub verifyssh {
|
|
my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
|
|
my $server = servername_id($proto, $ipvnum, $idnum);
|
|
my $pidfile = server_pidfilename($proto, $ipvnum, $idnum);
|
|
my $pid = 0;
|
|
if(open(FILE, "<$pidfile")) {
|
|
$pid=0+<FILE>;
|
|
close(FILE);
|
|
}
|
|
if($pid > 0) {
|
|
# if we have a pid it is actually our ssh server,
|
|
# since runsshserver() unlinks previous pidfile
|
|
if(!kill(0, $pid)) {
|
|
logmsg "RUN: SSH server has died after starting up\n";
|
|
checkdied($pid);
|
|
unlink($pidfile);
|
|
$pid = -1;
|
|
}
|
|
}
|
|
return $pid;
|
|
}
|
|
|
|
#######################################################################
|
|
# Verify that we can connect to the sftp server, properly authenticate
|
|
# with generated config and key files and run a simple remote pwd.
|
|
|
|
sub verifysftp {
|
|
my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
|
|
my $server = servername_id($proto, $ipvnum, $idnum);
|
|
my $verified = 0;
|
|
# Find out sftp client canonical file name
|
|
my $sftp = find_sftp();
|
|
if(!$sftp) {
|
|
logmsg "RUN: SFTP server cannot find $sftpexe\n";
|
|
return -1;
|
|
}
|
|
# Find out ssh client canonical file name
|
|
my $ssh = find_ssh();
|
|
if(!$ssh) {
|
|
logmsg "RUN: SFTP server cannot find $sshexe\n";
|
|
return -1;
|
|
}
|
|
# Connect to sftp server, authenticate and run a remote pwd
|
|
# command using our generated configuration and key files
|
|
my $cmd = "$sftp -b $sftpcmds -F $sftpconfig -S $ssh $ip > $sftplog 2>&1";
|
|
my $res = runclient($cmd);
|
|
# Search for pwd command response in log file
|
|
if(open(SFTPLOGFILE, "<$sftplog")) {
|
|
while(<SFTPLOGFILE>) {
|
|
if(/^Remote working directory: /) {
|
|
$verified = 1;
|
|
last;
|
|
}
|
|
}
|
|
close(SFTPLOGFILE);
|
|
}
|
|
return $verified;
|
|
}
|
|
|
|
|
|
#######################################################################
|
|
# STUB for verifying socks
|
|
|
|
sub verifysocks {
|
|
my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
|
|
my $server = servername_id($proto, $ipvnum, $idnum);
|
|
my $pidfile = server_pidfilename($proto, $ipvnum, $idnum);
|
|
my $pid = 0;
|
|
if(open(FILE, "<$pidfile")) {
|
|
$pid=0+<FILE>;
|
|
close(FILE);
|
|
}
|
|
if($pid > 0) {
|
|
# if we have a pid it is actually our socks server,
|
|
# since runsocksserver() unlinks previous pidfile
|
|
if(!kill(0, $pid)) {
|
|
logmsg "RUN: SOCKS server has died after starting up\n";
|
|
checkdied($pid);
|
|
unlink($pidfile);
|
|
$pid = -1;
|
|
}
|
|
}
|
|
return $pid;
|
|
}
|
|
|
|
#######################################################################
|
|
# Verify that the server that runs on $ip, $port is our server.
|
|
# Retry over several seconds before giving up. The ssh server in
|
|
# particular can take a long time to start if it needs to generate
|
|
# keys on a slow or loaded host.
|
|
#
|
|
|
|
my %protofunc = ('http' => \&verifyhttp,
|
|
'https' => \&verifyhttp,
|
|
'rtsp' => \&verifyrtsp,
|
|
'ftp' => \&verifyftp,
|
|
'pop3' => \&verifyftp,
|
|
'imap' => \&verifyftp,
|
|
'smtp' => \&verifyftp,
|
|
'ftps' => \&verifyftp,
|
|
'tftp' => \&verifyftp,
|
|
'ssh' => \&verifyssh,
|
|
'socks' => \&verifysocks);
|
|
|
|
sub verifyserver {
|
|
my ($proto, $ipvnum, $idnum, $ip, $port) = @_;
|
|
|
|
my $count = 30; # try for this many seconds
|
|
my $pid;
|
|
|
|
while($count--) {
|
|
my $fun = $protofunc{$proto};
|
|
|
|
$pid = &$fun($proto, $ipvnum, $idnum, $ip, $port);
|
|
|
|
if($pid > 0) {
|
|
last;
|
|
}
|
|
elsif($pid < 0) {
|
|
# a real failure, stop trying and bail out
|
|
return 0;
|
|
}
|
|
sleep(1);
|
|
}
|
|
return $pid;
|
|
}
|
|
|
|
|
|
|
|
#######################################################################
|
|
# start the http server
|
|
#
|
|
sub runhttpserver {
|
|
my ($verbose, $ipv6) = @_;
|
|
my $port = $HTTPPORT;
|
|
my $ip = $HOSTIP;
|
|
my $proto = 'http';
|
|
my $ipvnum = 4;
|
|
my $idnum = 1;
|
|
my $server;
|
|
my $srvrname;
|
|
my $pidfile;
|
|
my $logfile;
|
|
my $flags = "";
|
|
|
|
if($ipv6) {
|
|
# if IPv6, use a different setup
|
|
$ipvnum = 6;
|
|
$port = $HTTP6PORT;
|
|
$ip = $HOST6IP;
|
|
}
|
|
|
|
$server = servername_id($proto, $ipvnum, $idnum);
|
|
|
|
$pidfile = $serverpidfile{$server};
|
|
|
|
# don't retry if the server doesn't work
|
|
if ($doesntrun{$pidfile}) {
|
|
return (0,0);
|
|
}
|
|
|
|
my $pid = processexists($pidfile);
|
|
if($pid > 0) {
|
|
stopserver($server, "$pid");
|
|
}
|
|
unlink($pidfile) if(-f $pidfile);
|
|
|
|
$srvrname = servername_str($proto, $ipvnum, $idnum);
|
|
|
|
$logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
|
|
|
|
$flags .= "--fork " if($forkserver);
|
|
$flags .= "--verbose " if($debugprotocol);
|
|
$flags .= "--pidfile \"$pidfile\" --logfile \"$logfile\" ";
|
|
$flags .= "--id $idnum " if($idnum > 1);
|
|
$flags .= "--ipv$ipvnum --port $port --srcdir \"$srcdir\"";
|
|
|
|
my $cmd = "$perl $srcdir/httpserver.pl $flags";
|
|
my ($httppid, $pid2) = startnew($cmd, $pidfile, 15, 0);
|
|
|
|
if($httppid <= 0 || !kill(0, $httppid)) {
|
|
# it is NOT alive
|
|
logmsg "RUN: failed to start the $srvrname server\n";
|
|
stopserver($server, "$pid2");
|
|
displaylogs($testnumcheck);
|
|
$doesntrun{$pidfile} = 1;
|
|
return (0,0);
|
|
}
|
|
|
|
# Server is up. Verify that we can speak to it.
|
|
my $pid3 = verifyserver($proto, $ipvnum, $idnum, $ip, $port);
|
|
if(!$pid3) {
|
|
logmsg "RUN: $srvrname server failed verification\n";
|
|
# failed to talk to it properly. Kill the server and return failure
|
|
stopserver($server, "$httppid $pid2");
|
|
displaylogs($testnumcheck);
|
|
$doesntrun{$pidfile} = 1;
|
|
return (0,0);
|
|
}
|
|
$pid2 = $pid3;
|
|
|
|
if($verbose) {
|
|
logmsg "RUN: $srvrname server is now running PID $httppid\n";
|
|
}
|
|
|
|
sleep(1);
|
|
|
|
return ($httppid, $pid2);
|
|
}
|
|
|
|
#######################################################################
|
|
# start the https server (or rather, tunnel)
|
|
#
|
|
sub runhttpsserver {
|
|
my ($verbose, $ipv6, $certfile) = @_;
|
|
my $proto = 'https';
|
|
my $ip = ($ipv6 && ($ipv6 =~ /6$/)) ? "$HOST6IP" : "$HOSTIP";
|
|
my $ipvnum = ($ipv6 && ($ipv6 =~ /6$/)) ? 6 : 4;
|
|
my $idnum = 1;
|
|
my $server;
|
|
my $srvrname;
|
|
my $pidfile;
|
|
my $logfile;
|
|
my $flags = "";
|
|
|
|
if(!$stunnel) {
|
|
return (0,0);
|
|
}
|
|
|
|
$server = servername_id($proto, $ipvnum, $idnum);
|
|
|
|
$pidfile = $serverpidfile{$server};
|
|
|
|
# don't retry if the server doesn't work
|
|
if ($doesntrun{$pidfile}) {
|
|
return (0,0);
|
|
}
|
|
|
|
my $pid = processexists($pidfile);
|
|
if($pid > 0) {
|
|
stopserver($server, "$pid");
|
|
}
|
|
unlink($pidfile) if(-f $pidfile);
|
|
|
|
$srvrname = servername_str($proto, $ipvnum, $idnum);
|
|
|
|
$certfile = 'stunnel.pem' unless($certfile);
|
|
|
|
$logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
|
|
|
|
$flags .= "--verbose " if($debugprotocol);
|
|
$flags .= "--pidfile \"$pidfile\" --logfile \"$logfile\" ";
|
|
$flags .= "--id $idnum " if($idnum > 1);
|
|
$flags .= "--ipv$ipvnum --proto $proto ";
|
|
$flags .= "--certfile \"$certfile\" " if($certfile ne 'stunnel.pem');
|
|
$flags .= "--stunnel \"$stunnel\" --srcdir \"$srcdir\" ";
|
|
$flags .= "--connect $HTTPPORT --accept $HTTPSPORT";
|
|
|
|
my $cmd = "$perl $srcdir/secureserver.pl $flags";
|
|
my ($httpspid, $pid2) = startnew($cmd, $pidfile, 15, 0);
|
|
|
|
if($httpspid <= 0 || !kill(0, $httpspid)) {
|
|
# it is NOT alive
|
|
logmsg "RUN: failed to start the $srvrname server\n";
|
|
stopserver($server, "$pid2");
|
|
displaylogs($testnumcheck);
|
|
$doesntrun{$pidfile} = 1;
|
|
return(0,0);
|
|
}
|
|
|
|
# Server is up. Verify that we can speak to it.
|
|
my $pid3 = verifyserver($proto, $ipvnum, $idnum, $ip, $HTTPSPORT);
|
|
if(!$pid3) {
|
|
logmsg "RUN: $srvrname server failed verification\n";
|
|
# failed to talk to it properly. Kill the server and return failure
|
|
stopserver($server, "$httpspid $pid2");
|
|
displaylogs($testnumcheck);
|
|
$doesntrun{$pidfile} = 1;
|
|
return (0,0);
|
|
}
|
|
# Here pid3 is actually the pid returned by the unsecure-http server.
|
|
|
|
$runcert{$server} = $certfile;
|
|
|
|
if($verbose) {
|
|
logmsg "RUN: $srvrname server is now running PID $httpspid\n";
|
|
}
|
|
|
|
sleep(1);
|
|
|
|
return ($httpspid, $pid2);
|
|
}
|
|
|
|
#######################################################################
|
|
# start the pingpong server (FTP, POP3, IMAP, SMTP)
|
|
#
|
|
sub runpingpongserver {
|
|
my ($proto, $id, $verbose, $ipv6) = @_;
|
|
my $port;
|
|
my $ip = ($ipv6 && ($ipv6 =~ /6$/)) ? "$HOST6IP" : "$HOSTIP";
|
|
my $ipvnum = ($ipv6 && ($ipv6 =~ /6$/)) ? 6 : 4;
|
|
my $idnum = ($id && ($id =~ /^(\d+)$/) && ($id > 1)) ? $id : 1;
|
|
my $server;
|
|
my $srvrname;
|
|
my $pidfile;
|
|
my $logfile;
|
|
my $flags = "";
|
|
|
|
if($proto eq "ftp") {
|
|
$port = ($idnum>1)?$FTP2PORT:$FTPPORT;
|
|
|
|
if($ipvnum==6) {
|
|
# if IPv6, use a different setup
|
|
$port = $FTP6PORT;
|
|
}
|
|
}
|
|
elsif($proto eq "pop3") {
|
|
$port = ($ipvnum==6) ? $POP36PORT : $POP3PORT;
|
|
}
|
|
elsif($proto eq "imap") {
|
|
$port = ($ipvnum==6) ? $IMAP6PORT : $IMAPPORT;
|
|
}
|
|
elsif($proto eq "smtp") {
|
|
$port = ($ipvnum==6) ? $SMTP6PORT : $SMTPPORT;
|
|
}
|
|
else {
|
|
print STDERR "Unsupported protocol $proto!!\n";
|
|
return 0;
|
|
}
|
|
|
|
$server = servername_id($proto, $ipvnum, $idnum);
|
|
|
|
$pidfile = $serverpidfile{$server};
|
|
|
|
# don't retry if the server doesn't work
|
|
if ($doesntrun{$pidfile}) {
|
|
return (0,0);
|
|
}
|
|
|
|
my $pid = processexists($pidfile);
|
|
if($pid > 0) {
|
|
stopserver($server, "$pid");
|
|
}
|
|
unlink($pidfile) if(-f $pidfile);
|
|
|
|
$srvrname = servername_str($proto, $ipvnum, $idnum);
|
|
|
|
$logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
|
|
|
|
$flags .= "--verbose " if($debugprotocol);
|
|
$flags .= "--pidfile \"$pidfile\" --logfile \"$logfile\" ";
|
|
$flags .= "--srcdir \"$srcdir\" --proto $proto ";
|
|
$flags .= "--id $idnum " if($idnum > 1);
|
|
$flags .= "--ipv$ipvnum --port $port --addr \"$ip\"";
|
|
|
|
my $cmd = "$perl $srcdir/ftpserver.pl $flags";
|
|
my ($ftppid, $pid2) = startnew($cmd, $pidfile, 15, 0);
|
|
|
|
if($ftppid <= 0 || !kill(0, $ftppid)) {
|
|
# it is NOT alive
|
|
logmsg "RUN: failed to start the $srvrname server\n";
|
|
stopserver($server, "$pid2");
|
|
displaylogs($testnumcheck);
|
|
$doesntrun{$pidfile} = 1;
|
|
return (0,0);
|
|
}
|
|
|
|
# Server is up. Verify that we can speak to it.
|
|
my $pid3 = verifyserver($proto, $ipvnum, $idnum, $ip, $port);
|
|
if(!$pid3) {
|
|
logmsg "RUN: $srvrname server failed verification\n";
|
|
# failed to talk to it properly. Kill the server and return failure
|
|
stopserver($server, "$ftppid $pid2");
|
|
displaylogs($testnumcheck);
|
|
$doesntrun{$pidfile} = 1;
|
|
return (0,0);
|
|
}
|
|
$pid2 = $pid3;
|
|
|
|
if($verbose) {
|
|
logmsg "RUN: $srvrname server is now running PID $ftppid\n";
|
|
}
|
|
|
|
sleep(1);
|
|
|
|
return ($pid2, $ftppid);
|
|
}
|
|
|
|
#######################################################################
|
|
# start the ftps server (or rather, tunnel)
|
|
#
|
|
sub runftpsserver {
|
|
my ($verbose, $ipv6, $certfile) = @_;
|
|
my $proto = 'ftps';
|
|
my $ip = ($ipv6 && ($ipv6 =~ /6$/)) ? "$HOST6IP" : "$HOSTIP";
|
|
my $ipvnum = ($ipv6 && ($ipv6 =~ /6$/)) ? 6 : 4;
|
|
my $idnum = 1;
|
|
my $server;
|
|
my $srvrname;
|
|
my $pidfile;
|
|
my $logfile;
|
|
my $flags = "";
|
|
|
|
if(!$stunnel) {
|
|
return (0,0);
|
|
}
|
|
|
|
$server = servername_id($proto, $ipvnum, $idnum);
|
|
|
|
$pidfile = $serverpidfile{$server};
|
|
|
|
# don't retry if the server doesn't work
|
|
if ($doesntrun{$pidfile}) {
|
|
return (0,0);
|
|
}
|
|
|
|
my $pid = processexists($pidfile);
|
|
if($pid > 0) {
|
|
stopserver($server, "$pid");
|
|
}
|
|
unlink($pidfile) if(-f $pidfile);
|
|
|
|
$srvrname = servername_str($proto, $ipvnum, $idnum);
|
|
|
|
$certfile = 'stunnel.pem' unless($certfile);
|
|
|
|
$logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
|
|
|
|
$flags .= "--verbose " if($debugprotocol);
|
|
$flags .= "--pidfile \"$pidfile\" --logfile \"$logfile\" ";
|
|
$flags .= "--id $idnum " if($idnum > 1);
|
|
$flags .= "--ipv$ipvnum --proto $proto ";
|
|
$flags .= "--certfile \"$certfile\" " if($certfile ne 'stunnel.pem');
|
|
$flags .= "--stunnel \"$stunnel\" --srcdir \"$srcdir\" ";
|
|
$flags .= "--connect $FTPPORT --accept $FTPSPORT";
|
|
|
|
my $cmd = "$perl $srcdir/secureserver.pl $flags";
|
|
my ($ftpspid, $pid2) = startnew($cmd, $pidfile, 15, 0);
|
|
|
|
if($ftpspid <= 0 || !kill(0, $ftpspid)) {
|
|
# it is NOT alive
|
|
logmsg "RUN: failed to start the $srvrname server\n";
|
|
stopserver($server, "$pid2");
|
|
displaylogs($testnumcheck);
|
|
$doesntrun{$pidfile} = 1;
|
|
return(0,0);
|
|
}
|
|
|
|
# Server is up. Verify that we can speak to it.
|
|
my $pid3 = verifyserver($proto, $ipvnum, $idnum, $ip, $FTPSPORT);
|
|
if(!$pid3) {
|
|
logmsg "RUN: $srvrname server failed verification\n";
|
|
# failed to talk to it properly. Kill the server and return failure
|
|
stopserver($server, "$ftpspid $pid2");
|
|
displaylogs($testnumcheck);
|
|
$doesntrun{$pidfile} = 1;
|
|
return (0,0);
|
|
}
|
|
# Here pid3 is actually the pid returned by the unsecure-ftp server.
|
|
|
|
$runcert{$server} = $certfile;
|
|
|
|
if($verbose) {
|
|
logmsg "RUN: $srvrname server is now running PID $ftpspid\n";
|
|
}
|
|
|
|
sleep(1);
|
|
|
|
return ($ftpspid, $pid2);
|
|
}
|
|
|
|
#######################################################################
|
|
# start the tftp server
|
|
#
|
|
sub runtftpserver {
|
|
my ($id, $verbose, $ipv6) = @_;
|
|
my $port = $TFTPPORT;
|
|
my $ip = $HOSTIP;
|
|
my $proto = 'tftp';
|
|
my $ipvnum = 4;
|
|
my $idnum = ($id && ($id =~ /^(\d+)$/) && ($id > 1)) ? $id : 1;
|
|
my $server;
|
|
my $srvrname;
|
|
my $pidfile;
|
|
my $logfile;
|
|
my $flags = "";
|
|
|
|
if($ipv6) {
|
|
# if IPv6, use a different setup
|
|
$ipvnum = 6;
|
|
$port = $TFTP6PORT;
|
|
$ip = $HOST6IP;
|
|
}
|
|
|
|
$server = servername_id($proto, $ipvnum, $idnum);
|
|
|
|
$pidfile = $serverpidfile{$server};
|
|
|
|
# don't retry if the server doesn't work
|
|
if ($doesntrun{$pidfile}) {
|
|
return (0,0);
|
|
}
|
|
|
|
my $pid = processexists($pidfile);
|
|
if($pid > 0) {
|
|
stopserver($server, "$pid");
|
|
}
|
|
unlink($pidfile) if(-f $pidfile);
|
|
|
|
$srvrname = servername_str($proto, $ipvnum, $idnum);
|
|
|
|
$logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
|
|
|
|
$flags .= "--verbose " if($debugprotocol);
|
|
$flags .= "--pidfile \"$pidfile\" --logfile \"$logfile\" ";
|
|
$flags .= "--id $idnum " if($idnum > 1);
|
|
$flags .= "--ipv$ipvnum --port $port --srcdir \"$srcdir\"";
|
|
|
|
my $cmd = "$perl $srcdir/tftpserver.pl $flags";
|
|
my ($tftppid, $pid2) = startnew($cmd, $pidfile, 15, 0);
|
|
|
|
if($tftppid <= 0 || !kill(0, $tftppid)) {
|
|
# it is NOT alive
|
|
logmsg "RUN: failed to start the $srvrname server\n";
|
|
stopserver($server, "$pid2");
|
|
displaylogs($testnumcheck);
|
|
$doesntrun{$pidfile} = 1;
|
|
return (0,0);
|
|
}
|
|
|
|
# Server is up. Verify that we can speak to it.
|
|
my $pid3 = verifyserver($proto, $ipvnum, $idnum, $ip, $port);
|
|
if(!$pid3) {
|
|
logmsg "RUN: $srvrname server failed verification\n";
|
|
# failed to talk to it properly. Kill the server and return failure
|
|
stopserver($server, "$tftppid $pid2");
|
|
displaylogs($testnumcheck);
|
|
$doesntrun{$pidfile} = 1;
|
|
return (0,0);
|
|
}
|
|
$pid2 = $pid3;
|
|
|
|
if($verbose) {
|
|
logmsg "RUN: $srvrname server is now running PID $tftppid\n";
|
|
}
|
|
|
|
sleep(1);
|
|
|
|
return ($pid2, $tftppid);
|
|
}
|
|
|
|
|
|
#######################################################################
|
|
# start the rtsp server
|
|
#
|
|
sub runrtspserver {
|
|
my ($verbose, $ipv6) = @_;
|
|
my $port = $RTSPPORT;
|
|
my $ip = $HOSTIP;
|
|
my $proto = 'rtsp';
|
|
my $ipvnum = 4;
|
|
my $idnum = 1;
|
|
my $server;
|
|
my $srvrname;
|
|
my $pidfile;
|
|
my $logfile;
|
|
my $flags = "";
|
|
|
|
if($ipv6) {
|
|
# if IPv6, use a different setup
|
|
$ipvnum = 6;
|
|
$port = $RTSP6PORT;
|
|
$ip = $HOST6IP;
|
|
}
|
|
|
|
$server = servername_id($proto, $ipvnum, $idnum);
|
|
|
|
$pidfile = $serverpidfile{$server};
|
|
|
|
# don't retry if the server doesn't work
|
|
if ($doesntrun{$pidfile}) {
|
|
return (0,0);
|
|
}
|
|
|
|
my $pid = processexists($pidfile);
|
|
if($pid > 0) {
|
|
stopserver($server, "$pid");
|
|
}
|
|
unlink($pidfile) if(-f $pidfile);
|
|
|
|
$srvrname = servername_str($proto, $ipvnum, $idnum);
|
|
|
|
$logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
|
|
|
|
$flags .= "--verbose " if($debugprotocol);
|
|
$flags .= "--pidfile \"$pidfile\" --logfile \"$logfile\" ";
|
|
$flags .= "--id $idnum " if($idnum > 1);
|
|
$flags .= "--ipv$ipvnum --port $port --srcdir \"$srcdir\"";
|
|
|
|
my $cmd = "$perl $srcdir/rtspserver.pl $flags";
|
|
my ($rtsppid, $pid2) = startnew($cmd, $pidfile, 15, 0);
|
|
|
|
if($rtsppid <= 0 || !kill(0, $rtsppid)) {
|
|
# it is NOT alive
|
|
logmsg "RUN: failed to start the $srvrname server\n";
|
|
stopserver($server, "$pid2");
|
|
displaylogs($testnumcheck);
|
|
$doesntrun{$pidfile} = 1;
|
|
return (0,0);
|
|
}
|
|
|
|
# Server is up. Verify that we can speak to it.
|
|
my $pid3 = verifyserver($proto, $ipvnum, $idnum, $ip, $port);
|
|
if(!$pid3) {
|
|
logmsg "RUN: $srvrname server failed verification\n";
|
|
# failed to talk to it properly. Kill the server and return failure
|
|
stopserver($server, "$rtsppid $pid2");
|
|
displaylogs($testnumcheck);
|
|
$doesntrun{$pidfile} = 1;
|
|
return (0,0);
|
|
}
|
|
$pid2 = $pid3;
|
|
|
|
if($verbose) {
|
|
logmsg "RUN: $srvrname server is now running PID $rtsppid\n";
|
|
}
|
|
|
|
sleep(1);
|
|
|
|
return ($rtsppid, $pid2);
|
|
}
|
|
|
|
|
|
#######################################################################
|
|
# Start the ssh (scp/sftp) server
|
|
#
|
|
sub runsshserver {
|
|
my ($id, $verbose, $ipv6) = @_;
|
|
my $ip=$HOSTIP;
|
|
my $port = $SSHPORT;
|
|
my $socksport = $SOCKSPORT;
|
|
my $proto = 'ssh';
|
|
my $ipvnum = 4;
|
|
my $idnum = ($id && ($id =~ /^(\d+)$/) && ($id > 1)) ? $id : 1;
|
|
my $server;
|
|
my $srvrname;
|
|
my $pidfile;
|
|
my $logfile;
|
|
my $flags = "";
|
|
|
|
$server = servername_id($proto, $ipvnum, $idnum);
|
|
|
|
$pidfile = $serverpidfile{$server};
|
|
|
|
# don't retry if the server doesn't work
|
|
if ($doesntrun{$pidfile}) {
|
|
return (0,0);
|
|
}
|
|
|
|
my $pid = processexists($pidfile);
|
|
if($pid > 0) {
|
|
stopserver($server, "$pid");
|
|
}
|
|
unlink($pidfile) if(-f $pidfile);
|
|
|
|
$srvrname = servername_str($proto, $ipvnum, $idnum);
|
|
|
|
$logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
|
|
|
|
$flags .= "--verbose " if($verbose);
|
|
$flags .= "--debugprotocol " if($debugprotocol);
|
|
$flags .= "--pidfile \"$pidfile\" ";
|
|
$flags .= "--id $idnum " if($idnum > 1);
|
|
$flags .= "--ipv$ipvnum --addr \"$ip\" ";
|
|
$flags .= "--sshport $port --socksport $socksport ";
|
|
$flags .= "--user \"$USER\"";
|
|
|
|
my $cmd = "$perl $srcdir/sshserver.pl $flags";
|
|
my ($sshpid, $pid2) = startnew($cmd, $pidfile, 60, 0);
|
|
|
|
# on loaded systems sshserver start up can take longer than the timeout
|
|
# passed to startnew, when this happens startnew completes without being
|
|
# able to read the pidfile and consequently returns a zero pid2 above.
|
|
|
|
if($sshpid <= 0 || !kill(0, $sshpid)) {
|
|
# it is NOT alive
|
|
logmsg "RUN: failed to start the $srvrname server\n";
|
|
stopserver($server, "$pid2");
|
|
$doesntrun{$pidfile} = 1;
|
|
return (0,0);
|
|
}
|
|
|
|
# ssh server verification allows some extra time for the server to start up
|
|
# and gives us the opportunity of recovering the pid from the pidfile, when
|
|
# this verification succeeds the recovered pid is assigned to pid2.
|
|
|
|
my $pid3 = verifyserver($proto, $ipvnum, $idnum, $ip, $port);
|
|
if(!$pid3) {
|
|
logmsg "RUN: $srvrname server failed verification\n";
|
|
# failed to fetch server pid. Kill the server and return failure
|
|
stopserver($server, "$sshpid $pid2");
|
|
$doesntrun{$pidfile} = 1;
|
|
return (0,0);
|
|
}
|
|
$pid2 = $pid3;
|
|
|
|
# once it is known that the ssh server is alive, sftp server verification
|
|
# is performed actually connecting to it, authenticating and performing a
|
|
# very simple remote command. This verification is tried only one time.
|
|
|
|
$sshdlog = server_logfilename($LOGDIR, 'ssh', $ipvnum, $idnum);
|
|
$sftplog = server_logfilename($LOGDIR, 'sftp', $ipvnum, $idnum);
|
|
|
|
if(verifysftp('sftp', $ipvnum, $idnum, $ip, $port) < 1) {
|
|
logmsg "RUN: SFTP server failed verification\n";
|
|
# failed to talk to it properly. Kill the server and return failure
|
|
display_sftplog();
|
|
display_sftpconfig();
|
|
display_sshdlog();
|
|
display_sshdconfig();
|
|
stopserver($server, "$sshpid $pid2");
|
|
$doesntrun{$pidfile} = 1;
|
|
return (0,0);
|
|
}
|
|
|
|
if($verbose) {
|
|
logmsg "RUN: $srvrname server is now running PID $pid2\n";
|
|
}
|
|
|
|
return ($pid2, $sshpid);
|
|
}
|
|
|
|
#######################################################################
|
|
# Start the socks server
|
|
#
|
|
sub runsocksserver {
|
|
my ($id, $verbose, $ipv6) = @_;
|
|
my $ip=$HOSTIP;
|
|
my $port = $SOCKSPORT;
|
|
my $proto = 'socks';
|
|
my $ipvnum = 4;
|
|
my $idnum = ($id && ($id =~ /^(\d+)$/) && ($id > 1)) ? $id : 1;
|
|
my $server;
|
|
my $srvrname;
|
|
my $pidfile;
|
|
my $logfile;
|
|
my $flags = "";
|
|
|
|
$server = servername_id($proto, $ipvnum, $idnum);
|
|
|
|
$pidfile = $serverpidfile{$server};
|
|
|
|
# don't retry if the server doesn't work
|
|
if ($doesntrun{$pidfile}) {
|
|
return (0,0);
|
|
}
|
|
|
|
my $pid = processexists($pidfile);
|
|
if($pid > 0) {
|
|
stopserver($server, "$pid");
|
|
}
|
|
unlink($pidfile) if(-f $pidfile);
|
|
|
|
$srvrname = servername_str($proto, $ipvnum, $idnum);
|
|
|
|
$logfile = server_logfilename($LOGDIR, $proto, $ipvnum, $idnum);
|
|
|
|
# The ssh server must be already running
|
|
if(!$run{'ssh'}) {
|
|
logmsg "RUN: SOCKS server cannot find running SSH server\n";
|
|
$doesntrun{$pidfile} = 1;
|
|
return (0,0);
|
|
}
|
|
|
|
# Find out ssh daemon canonical file name
|
|
my $sshd = find_sshd();
|
|
if(!$sshd) {
|
|
logmsg "RUN: SOCKS server cannot find $sshdexe\n";
|
|
$doesntrun{$pidfile} = 1;
|
|
return (0,0);
|
|
}
|
|
|
|
# Find out ssh daemon version info
|
|
($sshdid, $sshdvernum, $sshdverstr, $sshderror) = sshversioninfo($sshd);
|
|
if(!$sshdid) {
|
|
# Not an OpenSSH or SunSSH ssh daemon
|
|
logmsg "$sshderror\n" if($verbose);
|
|
logmsg "SCP, SFTP and SOCKS tests require OpenSSH 2.9.9 or later\n";
|
|
$doesntrun{$pidfile} = 1;
|
|
return (0,0);
|
|
}
|
|
logmsg "ssh server found $sshd is $sshdverstr\n" if($verbose);
|
|
|
|
# Find out ssh client canonical file name
|
|
my $ssh = find_ssh();
|
|
if(!$ssh) {
|
|
logmsg "RUN: SOCKS server cannot find $sshexe\n";
|
|
$doesntrun{$pidfile} = 1;
|
|
return (0,0);
|
|
}
|
|
|
|
# Find out ssh client version info
|
|
my ($sshid, $sshvernum, $sshverstr, $ssherror) = sshversioninfo($ssh);
|
|
if(!$sshid) {
|
|
# Not an OpenSSH or SunSSH ssh client
|
|
logmsg "$ssherror\n" if($verbose);
|
|
logmsg "SCP, SFTP and SOCKS tests require OpenSSH 2.9.9 or later\n";
|
|
$doesntrun{$pidfile} = 1;
|
|
return (0,0);
|
|
}
|
|
|
|
# Verify minimum ssh client version
|
|
if((($sshid =~ /OpenSSH/) && ($sshvernum < 299)) ||
|
|
(($sshid =~ /SunSSH/) && ($sshvernum < 100))) {
|
|
logmsg "ssh client found $ssh is $sshverstr\n";
|
|
logmsg "SCP, SFTP and SOCKS tests require OpenSSH 2.9.9 or later\n";
|
|
$doesntrun{$pidfile} = 1;
|
|
return (0,0);
|
|
}
|
|
logmsg "ssh client found $ssh is $sshverstr\n" if($verbose);
|
|
|
|
# Verify if ssh client and ssh daemon versions match
|
|
if(($sshdid ne $sshid) || ($sshdvernum != $sshvernum)) {
|
|
# Our test harness might work with slightly mismatched versions
|
|
logmsg "Warning: version mismatch: sshd $sshdverstr - ssh $sshverstr\n"
|
|
if($verbose);
|
|
}
|
|
|
|
# Config file options for ssh client are previously set from sshserver.pl
|
|
if(! -e $sshconfig) {
|
|
logmsg "RUN: SOCKS server cannot find $sshconfig\n";
|
|
$doesntrun{$pidfile} = 1;
|
|
return (0,0);
|
|
}
|
|
|
|
$sshlog = server_logfilename($LOGDIR, 'socks', $ipvnum, $idnum);
|
|
|
|
# start our socks server
|
|
my $cmd="$ssh -N -F $sshconfig $ip > $sshlog 2>&1";
|
|
my ($sshpid, $pid2) = startnew($cmd, $pidfile, 30, 1);
|
|
|
|
if($sshpid <= 0 || !kill(0, $sshpid)) {
|
|
# it is NOT alive
|
|
logmsg "RUN: failed to start the $srvrname server\n";
|
|
display_sshlog();
|
|
display_sshconfig();
|
|
display_sshdlog();
|
|
display_sshdconfig();
|
|
stopserver($server, "$pid2");
|
|
$doesntrun{$pidfile} = 1;
|
|
return (0,0);
|
|
}
|
|
|
|
# Ugly hack but ssh doesn't support pid files
|
|
my $pid3 = verifyserver($proto, $ipvnum, $idnum, $ip, $port);
|
|
if(!$pid3) {
|
|
logmsg "RUN: $srvrname server failed verification\n";
|
|
# failed to talk to it properly. Kill the server and return failure
|
|
stopserver($server, "$sshpid $pid2");
|
|
$doesntrun{$pidfile} = 1;
|
|
return (0,0);
|
|
}
|
|
$pid2 = $pid3;
|
|
|
|
if($verbose) {
|
|
logmsg "RUN: $srvrname server is now running PID $pid2\n";
|
|
}
|
|
|
|
return ($pid2, $sshpid);
|
|
}
|
|
|
|
#######################################################################
|
|
# Remove all files in the specified directory
|
|
#
|
|
sub cleardir {
|
|
my $dir = $_[0];
|
|
my $count;
|
|
my $file;
|
|
|
|
# Get all files
|
|
opendir(DIR, $dir) ||
|
|
return 0; # can't open dir
|
|
while($file = readdir(DIR)) {
|
|
if($file !~ /^\./) {
|
|
unlink("$dir/$file");
|
|
$count++;
|
|
}
|
|
}
|
|
closedir DIR;
|
|
return $count;
|
|
}
|
|
|
|
#######################################################################
|
|
# filter out the specified pattern from the given input file and store the
|
|
# results in the given output file
|
|
#
|
|
sub filteroff {
|
|
my $infile=$_[0];
|
|
my $filter=$_[1];
|
|
my $ofile=$_[2];
|
|
|
|
open(IN, "<$infile")
|
|
|| return 1;
|
|
|
|
open(OUT, ">$ofile")
|
|
|| return 1;
|
|
|
|
# logmsg "FILTER: off $filter from $infile to $ofile\n";
|
|
|
|
while(<IN>) {
|
|
$_ =~ s/$filter//;
|
|
print OUT $_;
|
|
}
|
|
close(IN);
|
|
close(OUT);
|
|
return 0;
|
|
}
|
|
|
|
#######################################################################
|
|
# compare test results with the expected output, we might filter off
|
|
# some pattern that is allowed to differ, output test results
|
|
#
|
|
|
|
sub compare {
|
|
# filter off patterns _before_ this comparison!
|
|
my ($subject, $firstref, $secondref)=@_;
|
|
|
|
my $result = compareparts($firstref, $secondref);
|
|
|
|
if($result) {
|
|
if(!$short) {
|
|
logmsg "\n $subject FAILED:\n";
|
|
logmsg showdiff($LOGDIR, $firstref, $secondref);
|
|
}
|
|
else {
|
|
logmsg "FAILED\n";
|
|
}
|
|
}
|
|
return $result;
|
|
}
|
|
|
|
#######################################################################
|
|
# display information about curl and the host the test suite runs on
|
|
#
|
|
sub checksystem {
|
|
|
|
unlink($memdump); # remove this if there was one left
|
|
|
|
my $feat;
|
|
my $curl;
|
|
my $libcurl;
|
|
my $versretval;
|
|
my $versnoexec;
|
|
my @version=();
|
|
|
|
my $curlverout="$LOGDIR/curlverout.log";
|
|
my $curlvererr="$LOGDIR/curlvererr.log";
|
|
my $versioncmd="$CURL --version 1>$curlverout 2>$curlvererr";
|
|
|
|
unlink($curlverout);
|
|
unlink($curlvererr);
|
|
|
|
$versretval = runclient($versioncmd);
|
|
$versnoexec = $!;
|
|
|
|
open(VERSOUT, "<$curlverout");
|
|
@version = <VERSOUT>;
|
|
close(VERSOUT);
|
|
|
|
for(@version) {
|
|
chomp;
|
|
|
|
if($_ =~ /^curl/) {
|
|
$curl = $_;
|
|
$curl =~ s/^(.*)(libcurl.*)/$1/g;
|
|
|
|
$libcurl = $2;
|
|
if($curl =~ /mingw32/) {
|
|
# This is a windows minw32 build, we need to translate the
|
|
# given path to the "actual" windows path.
|
|
|
|
my @m = `mount`;
|
|
my $matchlen;
|
|
my $bestmatch;
|
|
my $mount;
|
|
|
|
# example mount output:
|
|
# C:\DOCUME~1\Temp on /tmp type user (binmode,noumount)
|
|
# c:\ActiveState\perl on /perl type user (binmode)
|
|
# C:\msys\1.0\bin on /usr/bin type user (binmode,cygexec,noumount)
|
|
# C:\msys\1.0\bin on /bin type user (binmode,cygexec,noumount)
|
|
|
|
foreach $mount (@m) {
|
|
if( $mount =~ /(.*) on ([^ ]*) type /) {
|
|
my ($mingw, $real)=($2, $1);
|
|
if($pwd =~ /^$mingw/) {
|
|
# the path we got from pwd starts with the path
|
|
# we found on this line in the mount output
|
|
|
|
my $len = length($real);
|
|
if($len > $matchlen) {
|
|
# we remember the match that is the longest
|
|
$matchlen = $len;
|
|
$bestmatch = $real;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
if(!$matchlen) {
|
|
logmsg "Serious error, can't find our \"real\" path\n";
|
|
}
|
|
else {
|
|
# now prepend the prefix from the mount command to build
|
|
# our "actual path"
|
|
$pwd = "$bestmatch$pwd";
|
|
}
|
|
$pwd =~ s#\\#/#g;
|
|
}
|
|
elsif ($curl =~ /win32/) {
|
|
# Native Windows builds don't understand the
|
|
# output of cygwin's pwd. It will be
|
|
# something like /cygdrive/c/<some path>.
|
|
#
|
|
# Use the cygpath utility to convert the
|
|
# working directory to a Windows friendly
|
|
# path. The -m option converts to use drive
|
|
# letter:, but it uses / instead \. Forward
|
|
# slashes (/) are easier for us. We don't
|
|
# have to escape them to get them to curl
|
|
# through a shell.
|
|
chomp($pwd = `cygpath -m $pwd`);
|
|
}
|
|
elsif ($libcurl =~ /openssl/i) {
|
|
$has_openssl=1;
|
|
$ssllib="OpenSSL";
|
|
}
|
|
elsif ($libcurl =~ /gnutls/i) {
|
|
$has_gnutls=1;
|
|
$ssllib="GnuTLS";
|
|
}
|
|
elsif ($libcurl =~ /nss/i) {
|
|
$has_nss=1;
|
|
$ssllib="NSS";
|
|
}
|
|
elsif ($libcurl =~ /yassl/i) {
|
|
$has_yassl=1;
|
|
$has_openssl=1;
|
|
$ssllib="yassl";
|
|
}
|
|
elsif ($libcurl =~ /polarssl/i) {
|
|
$has_polarssl=1;
|
|
$has_openssl=1;
|
|
$ssllib="polarssl";
|
|
}
|
|
}
|
|
elsif($_ =~ /^Protocols: (.*)/i) {
|
|
# these are the protocols compiled in to this libcurl
|
|
@protocols = split(' ', $1);
|
|
|
|
# Generate a "proto-ipv6" version of each protocol to match the
|
|
# IPv6 <server> name. This works even if IPv6 support isn't
|
|
# compiled in because the <features> test will fail.
|
|
push @protocols, map($_ . "-ipv6", @protocols);
|
|
|
|
# 'none' is used in test cases to mean no server
|
|
push @protocols, ('none');
|
|
}
|
|
elsif($_ =~ /^Features: (.*)/i) {
|
|
$feat = $1;
|
|
if($feat =~ /TrackMemory/i) {
|
|
# curl was built with --enable-curldebug (memory tracking)
|
|
$curl_debug = 1;
|
|
}
|
|
if($feat =~ /debug/i) {
|
|
# curl was built with --enable-debug
|
|
$debug_build = 1;
|
|
# set the NETRC debug env
|
|
$ENV{'CURL_DEBUG_NETRC'} = "$LOGDIR/netrc";
|
|
}
|
|
if($feat =~ /SSL/i) {
|
|
# ssl enabled
|
|
$ssl_version=1;
|
|
}
|
|
if($feat =~ /Largefile/i) {
|
|
# large file support
|
|
$large_file=1;
|
|
}
|
|
if($feat =~ /IDN/i) {
|
|
# IDN support
|
|
$has_idn=1;
|
|
}
|
|
if($feat =~ /IPv6/i) {
|
|
$has_ipv6 = 1;
|
|
}
|
|
if($feat =~ /libz/i) {
|
|
$has_libz = 1;
|
|
}
|
|
if($feat =~ /NTLM/i) {
|
|
# NTLM enabled
|
|
$has_ntlm=1;
|
|
}
|
|
if($feat =~ /CharConv/i) {
|
|
# CharConv enabled
|
|
$has_charconv=1;
|
|
}
|
|
}
|
|
}
|
|
if(!$curl) {
|
|
logmsg "unable to get curl's version, further details are:\n";
|
|
logmsg "issued command: \n";
|
|
logmsg "$versioncmd \n";
|
|
if ($versretval == -1) {
|
|
logmsg "command failed with: \n";
|
|
logmsg "$versnoexec \n";
|
|
}
|
|
elsif ($versretval & 127) {
|
|
logmsg sprintf("command died with signal %d, and %s coredump.\n",
|
|
($versretval & 127), ($versretval & 128)?"a":"no");
|
|
}
|
|
else {
|
|
logmsg sprintf("command exited with value %d \n", $versretval >> 8);
|
|
}
|
|
logmsg "contents of $curlverout: \n";
|
|
displaylogcontent("$curlverout");
|
|
logmsg "contents of $curlvererr: \n";
|
|
displaylogcontent("$curlvererr");
|
|
die "couldn't get curl's version";
|
|
}
|
|
|
|
if(-r "../lib/curl_config.h") {
|
|
open(CONF, "<../lib/curl_config.h");
|
|
while(<CONF>) {
|
|
if($_ =~ /^\#define HAVE_GETRLIMIT/) {
|
|
$has_getrlimit = 1;
|
|
}
|
|
}
|
|
close(CONF);
|
|
}
|
|
|
|
if($has_ipv6) {
|
|
# client has ipv6 support
|
|
|
|
# check if the HTTP server has it!
|
|
my @sws = `server/sws --version`;
|
|
if($sws[0] =~ /IPv6/) {
|
|
# HTTP server has ipv6 support!
|
|
$http_ipv6 = 1;
|
|
}
|
|
|
|
# check if the FTP server has it!
|
|
@sws = `server/sockfilt --version`;
|
|
if($sws[0] =~ /IPv6/) {
|
|
# FTP server has ipv6 support!
|
|
$ftp_ipv6 = 1;
|
|
}
|
|
}
|
|
|
|
if(!$curl_debug && $torture) {
|
|
die "can't run torture tests since curl was not built with curldebug";
|
|
}
|
|
|
|
$has_shared = `sh $CURLCONFIG --built-shared`;
|
|
chomp $has_shared;
|
|
|
|
# curl doesn't list cryptographic support separately, so assume it's
|
|
# always available
|
|
$has_crypto=1;
|
|
|
|
my $hostname=join(' ', runclientoutput("hostname"));
|
|
my $hosttype=join(' ', runclientoutput("uname -a"));
|
|
|
|
logmsg ("********* System characteristics ******** \n",
|
|
"* $curl\n",
|
|
"* $libcurl\n",
|
|
"* Features: $feat\n",
|
|
"* Host: $hostname",
|
|
"* System: $hosttype");
|
|
|
|
logmsg sprintf("* Server SSL: %8s", $stunnel?"ON ":"OFF");
|
|
logmsg sprintf(" libcurl SSL: %s\n", $ssl_version?"ON ":"OFF");
|
|
logmsg sprintf("* debug build: %8s", $debug_build?"ON ":"OFF");
|
|
logmsg sprintf(" track memory: %s\n", $curl_debug?"ON ":"OFF");
|
|
logmsg sprintf("* valgrind: %8s", $valgrind?"ON ":"OFF");
|
|
logmsg sprintf(" HTTP IPv6 %s\n", $http_ipv6?"ON ":"OFF");
|
|
logmsg sprintf("* FTP IPv6 %8s", $ftp_ipv6?"ON ":"OFF");
|
|
logmsg sprintf(" Libtool lib: %s\n", $libtool?"ON ":"OFF");
|
|
logmsg sprintf("* Shared build: %s\n", $has_shared);
|
|
if($ssl_version) {
|
|
logmsg sprintf("* SSL library: %13s\n", $ssllib);
|
|
}
|
|
|
|
logmsg "* Ports:\n";
|
|
|
|
logmsg sprintf("* HTTP/%d ", $HTTPPORT);
|
|
logmsg sprintf("FTP/%d ", $FTPPORT);
|
|
logmsg sprintf("FTP2/%d ", $FTP2PORT);
|
|
logmsg sprintf("RTSP/%d ", $RTSPPORT);
|
|
if($stunnel) {
|
|
logmsg sprintf("FTPS/%d ", $FTPSPORT);
|
|
logmsg sprintf("HTTPS/%d ", $HTTPSPORT);
|
|
}
|
|
logmsg sprintf("\n* TFTP/%d ", $TFTPPORT);
|
|
if($http_ipv6) {
|
|
logmsg sprintf("HTTP-IPv6/%d ", $HTTP6PORT);
|
|
logmsg sprintf("RTSP-IPv6/%d ", $RTSP6PORT);
|
|
}
|
|
if($ftp_ipv6) {
|
|
logmsg sprintf("FTP-IPv6/%d ", $FTP6PORT);
|
|
}
|
|
if($tftp_ipv6) {
|
|
logmsg sprintf("TFTP-IPv6/%d ", $TFTP6PORT);
|
|
}
|
|
logmsg sprintf("\n* SSH/%d ", $SSHPORT);
|
|
logmsg sprintf("SOCKS/%d ", $SOCKSPORT);
|
|
logmsg sprintf("POP3/%d ", $POP3PORT);
|
|
logmsg sprintf("IMAP/%d ", $IMAPPORT);
|
|
logmsg sprintf("SMTP/%d\n", $SMTPPORT);
|
|
if($ftp_ipv6) {
|
|
logmsg sprintf("* POP3-IPv6/%d ", $POP36PORT);
|
|
logmsg sprintf("IMAP-IPv6/%d ", $IMAP6PORT);
|
|
logmsg sprintf("SMTP-IPv6/%d\n", $SMTP6PORT);
|
|
}
|
|
|
|
$has_textaware = ($^O eq 'MSWin32') || ($^O eq 'msys');
|
|
|
|
logmsg "***************************************** \n";
|
|
}
|
|
|
|
#######################################################################
|
|
# substitute the variable stuff into either a joined up file or
|
|
# a command, in either case passed by reference
|
|
#
|
|
sub subVariables {
|
|
my ($thing) = @_;
|
|
$$thing =~ s/%HOSTIP/$HOSTIP/g;
|
|
$$thing =~ s/%HTTPPORT/$HTTPPORT/g;
|
|
$$thing =~ s/%HOST6IP/$HOST6IP/g;
|
|
$$thing =~ s/%HTTP6PORT/$HTTP6PORT/g;
|
|
$$thing =~ s/%HTTPSPORT/$HTTPSPORT/g;
|
|
$$thing =~ s/%FTPPORT/$FTPPORT/g;
|
|
$$thing =~ s/%FTP6PORT/$FTP6PORT/g;
|
|
$$thing =~ s/%FTP2PORT/$FTP2PORT/g;
|
|
$$thing =~ s/%FTPSPORT/$FTPSPORT/g;
|
|
$$thing =~ s/%SRCDIR/$srcdir/g;
|
|
$$thing =~ s/%PWD/$pwd/g;
|
|
$$thing =~ s/%TFTPPORT/$TFTPPORT/g;
|
|
$$thing =~ s/%TFTP6PORT/$TFTP6PORT/g;
|
|
$$thing =~ s/%SSHPORT/$SSHPORT/g;
|
|
$$thing =~ s/%SOCKSPORT/$SOCKSPORT/g;
|
|
$$thing =~ s/%POP3PORT/$POP3PORT/g;
|
|
$$thing =~ s/%POP36PORT/$POP36PORT/g;
|
|
$$thing =~ s/%IMAPPORT/$IMAPPORT/g;
|
|
$$thing =~ s/%IMAP6PORT/$IMAP6PORT/g;
|
|
$$thing =~ s/%SMTPPORT/$SMTPPORT/g;
|
|
$$thing =~ s/%SMTP6PORT/$SMTP6PORT/g;
|
|
$$thing =~ s/%CURL/$CURL/g;
|
|
$$thing =~ s/%USER/$USER/g;
|
|
$$thing =~ s/%CLIENTIP/$CLIENTIP/g;
|
|
$$thing =~ s/%CLIENT6IP/$CLIENT6IP/g;
|
|
$$thing =~ s/%RTSPPORT/$RTSPPORT/g;
|
|
$$thing =~ s/%RTSP6PORT/$RTSP6PORT/g;
|
|
|
|
# The purpose of FTPTIME2 and FTPTIME3 is to provide times that can be
|
|
# used for time-out tests and that whould work on most hosts as these
|
|
# adjust for the startup/check time for this particular host. We needed
|
|
# to do this to make the test suite run better on very slow hosts.
|
|
|
|
my $ftp2 = $ftpchecktime * 2;
|
|
my $ftp3 = $ftpchecktime * 3;
|
|
|
|
$$thing =~ s/%FTPTIME2/$ftp2/g;
|
|
$$thing =~ s/%FTPTIME3/$ftp3/g;
|
|
}
|
|
|
|
sub fixarray {
|
|
my @in = @_;
|
|
|
|
for(@in) {
|
|
subVariables \$_;
|
|
}
|
|
return @in;
|
|
}
|
|
|
|
#######################################################################
|
|
# Provide time stamps for single test skipped events
|
|
#
|
|
sub timestampskippedevents {
|
|
my $testnum = $_[0];
|
|
|
|
return if((not defined($testnum)) || ($testnum < 1));
|
|
|
|
if($timestats) {
|
|
|
|
if($timevrfyend{$testnum}) {
|
|
return;
|
|
}
|
|
elsif($timesrvrlog{$testnum}) {
|
|
$timevrfyend{$testnum} = $timesrvrlog{$testnum};
|
|
return;
|
|
}
|
|
elsif($timetoolend{$testnum}) {
|
|
$timevrfyend{$testnum} = $timetoolend{$testnum};
|
|
$timesrvrlog{$testnum} = $timetoolend{$testnum};
|
|
}
|
|
elsif($timetoolini{$testnum}) {
|
|
$timevrfyend{$testnum} = $timetoolini{$testnum};
|
|
$timesrvrlog{$testnum} = $timetoolini{$testnum};
|
|
$timetoolend{$testnum} = $timetoolini{$testnum};
|
|
}
|
|
elsif($timesrvrend{$testnum}) {
|
|
$timevrfyend{$testnum} = $timesrvrend{$testnum};
|
|
$timesrvrlog{$testnum} = $timesrvrend{$testnum};
|
|
$timetoolend{$testnum} = $timesrvrend{$testnum};
|
|
$timetoolini{$testnum} = $timesrvrend{$testnum};
|
|
}
|
|
elsif($timesrvrini{$testnum}) {
|
|
$timevrfyend{$testnum} = $timesrvrini{$testnum};
|
|
$timesrvrlog{$testnum} = $timesrvrini{$testnum};
|
|
$timetoolend{$testnum} = $timesrvrini{$testnum};
|
|
$timetoolini{$testnum} = $timesrvrini{$testnum};
|
|
$timesrvrend{$testnum} = $timesrvrini{$testnum};
|
|
}
|
|
elsif($timeprepini{$testnum}) {
|
|
$timevrfyend{$testnum} = $timeprepini{$testnum};
|
|
$timesrvrlog{$testnum} = $timeprepini{$testnum};
|
|
$timetoolend{$testnum} = $timeprepini{$testnum};
|
|
$timetoolini{$testnum} = $timeprepini{$testnum};
|
|
$timesrvrend{$testnum} = $timeprepini{$testnum};
|
|
$timesrvrini{$testnum} = $timeprepini{$testnum};
|
|
}
|
|
}
|
|
}
|
|
|
|
#######################################################################
|
|
# Run a single specified test case
|
|
#
|
|
sub singletest {
|
|
my ($testnum, $count, $total)=@_;
|
|
|
|
my @what;
|
|
my $why;
|
|
my %feature;
|
|
my $cmd;
|
|
|
|
# copy test number to a global scope var, this allows
|
|
# testnum checking when starting test harness servers.
|
|
$testnumcheck = $testnum;
|
|
|
|
# timestamp test preparation start
|
|
$timeprepini{$testnum} = Time::HiRes::time() if($timestats);
|
|
|
|
if($disttests !~ /test$testnum\W/ ) {
|
|
logmsg "Warning: test$testnum not present in tests/data/Makefile.am\n";
|
|
}
|
|
|
|
# load the test case file definition
|
|
if(loadtest("${TESTDIR}/test${testnum}")) {
|
|
if($verbose) {
|
|
# this is not a test
|
|
logmsg "RUN: $testnum doesn't look like a test case\n";
|
|
}
|
|
$why = "no test";
|
|
}
|
|
else {
|
|
@what = getpart("client", "features");
|
|
}
|
|
|
|
for(@what) {
|
|
my $f = $_;
|
|
$f =~ s/\s//g;
|
|
|
|
$feature{$f}=$f; # we require this feature
|
|
|
|
if($f eq "SSL") {
|
|
if($ssl_version) {
|
|
next;
|
|
}
|
|
}
|
|
elsif($f eq "OpenSSL") {
|
|
if($has_openssl) {
|
|
next;
|
|
}
|
|
}
|
|
elsif($f eq "GnuTLS") {
|
|
if($has_gnutls) {
|
|
next;
|
|
}
|
|
}
|
|
elsif($f eq "NSS") {
|
|
if($has_nss) {
|
|
next;
|
|
}
|
|
}
|
|
elsif($f eq "netrc_debug") {
|
|
if($debug_build) {
|
|
next;
|
|
}
|
|
}
|
|
elsif($f eq "large_file") {
|
|
if($large_file) {
|
|
next;
|
|
}
|
|
}
|
|
elsif($f eq "idn") {
|
|
if($has_idn) {
|
|
next;
|
|
}
|
|
}
|
|
elsif($f eq "ipv6") {
|
|
if($has_ipv6) {
|
|
next;
|
|
}
|
|
}
|
|
elsif($f eq "libz") {
|
|
if($has_libz) {
|
|
next;
|
|
}
|
|
}
|
|
elsif($f eq "NTLM") {
|
|
if($has_ntlm) {
|
|
next;
|
|
}
|
|
}
|
|
elsif($f eq "getrlimit") {
|
|
if($has_getrlimit) {
|
|
next;
|
|
}
|
|
}
|
|
elsif($f eq "crypto") {
|
|
if($has_crypto) {
|
|
next;
|
|
}
|
|
}
|
|
elsif($f eq "socks") {
|
|
next;
|
|
}
|
|
# See if this "feature" is in the list of supported protocols
|
|
elsif (grep /^$f$/, @protocols) {
|
|
next;
|
|
}
|
|
|
|
$why = "curl lacks $f support";
|
|
last;
|
|
}
|
|
|
|
if(!$why) {
|
|
my @keywords = getpart("info", "keywords");
|
|
my $match;
|
|
my $k;
|
|
for $k (@keywords) {
|
|
chomp $k;
|
|
if ($disabled_keywords{$k}) {
|
|
$why = "disabled by keyword";
|
|
} elsif ($enabled_keywords{$k}) {
|
|
$match = 1;
|
|
}
|
|
}
|
|
|
|
if(!$why && !$match && %enabled_keywords) {
|
|
$why = "disabled by missing keyword";
|
|
}
|
|
}
|
|
|
|
# timestamp required servers verification start
|
|
$timesrvrini{$testnum} = Time::HiRes::time() if($timestats);
|
|
|
|
if(!$why) {
|
|
$why = serverfortest($testnum);
|
|
}
|
|
|
|
# timestamp required servers verification end
|
|
$timesrvrend{$testnum} = Time::HiRes::time() if($timestats);
|
|
|
|
# test definition may instruct to (un)set environment vars
|
|
# this is done this early, so that the precheck can use environment
|
|
# variables and still bail out fine on errors
|
|
my %oldenv;
|
|
my @setenv = getpart("client", "setenv");
|
|
if(@setenv) {
|
|
foreach my $s (@setenv) {
|
|
chomp $s;
|
|
subVariables \$s;
|
|
if($s =~ /([^=]*)=(.*)/) {
|
|
my ($var, $content) = ($1, $2);
|
|
# remember current setting, to restore it once test runs
|
|
$oldenv{$var} = ($ENV{$var})?"$ENV{$var}":'notset';
|
|
# set new value
|
|
if(!$content) {
|
|
delete $ENV{$var} if($ENV{$var});
|
|
}
|
|
else {
|
|
if(($has_shared ne "yes") && ($var =~ /^LD_PRELOAD/)) {
|
|
# print "Skipping LD_PRELOAD due to no shared build\n";
|
|
next;
|
|
}
|
|
$ENV{$var} = "$content";
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if(!$why) {
|
|
# TODO:
|
|
# Add a precheck cache. If a precheck command was already invoked
|
|
# exactly like this, then use the previous result to speed up
|
|
# successive test invokes!
|
|
|
|
my @precheck = getpart("client", "precheck");
|
|
if(@precheck) {
|
|
$cmd = $precheck[0];
|
|
chomp $cmd;
|
|
subVariables \$cmd;
|
|
if($cmd) {
|
|
my @p = split(/ /, $cmd);
|
|
if($p[0] !~ /\//) {
|
|
# the first word, the command, does not contain a slash so
|
|
# we will scan the "improved" PATH to find the command to
|
|
# be able to run it
|
|
my $fullp = checktestcmd($p[0]);
|
|
|
|
if($fullp) {
|
|
$p[0] = $fullp;
|
|
}
|
|
$cmd = join(" ", @p);
|
|
}
|
|
|
|
my @o = `$cmd 2>/dev/null`;
|
|
if($o[0]) {
|
|
$why = $o[0];
|
|
chomp $why;
|
|
} elsif($?) {
|
|
$why = "precheck command error";
|
|
}
|
|
logmsg "prechecked $cmd\n" if($verbose);
|
|
}
|
|
}
|
|
}
|
|
|
|
if($why && !$listonly) {
|
|
# there's a problem, count it as "skipped"
|
|
$skipped++;
|
|
$skipped{$why}++;
|
|
$teststat[$testnum]=$why; # store reason for this test case
|
|
|
|
if(!$short) {
|
|
printf "test %03d SKIPPED: $why\n", $testnum;
|
|
}
|
|
|
|
timestampskippedevents($testnum);
|
|
return -1;
|
|
}
|
|
logmsg sprintf("test %03d...", $testnum);
|
|
|
|
# extract the reply data
|
|
my @reply = getpart("reply", "data");
|
|
my @replycheck = getpart("reply", "datacheck");
|
|
|
|
if (@replycheck) {
|
|
# we use this file instead to check the final output against
|
|
|
|
my %hash = getpartattr("reply", "datacheck");
|
|
if($hash{'nonewline'}) {
|
|
# Yes, we must cut off the final newline from the final line
|
|
# of the datacheck
|
|
chomp($replycheck[$#replycheck]);
|
|
}
|
|
|
|
@reply=@replycheck;
|
|
}
|
|
|
|
# curl command to run
|
|
my @curlcmd= fixarray ( getpart("client", "command") );
|
|
|
|
# this is the valid protocol blurb curl should generate
|
|
my @protocol= fixarray ( getpart("verify", "protocol") );
|
|
|
|
# redirected stdout/stderr to these files
|
|
$STDOUT="$LOGDIR/stdout$testnum";
|
|
$STDERR="$LOGDIR/stderr$testnum";
|
|
|
|
# if this section exists, we verify that the stdout contained this:
|
|
my @validstdout = fixarray ( getpart("verify", "stdout") );
|
|
|
|
# if this section exists, we verify upload
|
|
my @upload = getpart("verify", "upload");
|
|
|
|
# if this section exists, it might be FTP server instructions:
|
|
my @ftpservercmd = getpart("reply", "servercmd");
|
|
|
|
my $CURLOUT="$LOGDIR/curl$testnum.out"; # curl output if not stdout
|
|
|
|
# name of the test
|
|
my @testname= getpart("client", "name");
|
|
|
|
if(!$short) {
|
|
my $name = $testname[0];
|
|
$name =~ s/\n//g;
|
|
logmsg "[$name]\n";
|
|
}
|
|
|
|
if($listonly) {
|
|
timestampskippedevents($testnum);
|
|
return 0; # look successful
|
|
}
|
|
|
|
my @codepieces = getpart("client", "tool");
|
|
|
|
my $tool="";
|
|
if(@codepieces) {
|
|
$tool = $codepieces[0];
|
|
chomp $tool;
|
|
}
|
|
|
|
# remove server output logfiles
|
|
unlink($SERVERIN);
|
|
unlink($SERVER2IN);
|
|
|
|
if(@ftpservercmd) {
|
|
# write the instructions to file
|
|
writearray($FTPDCMD, \@ftpservercmd);
|
|
}
|
|
|
|
# get the command line options to use
|
|
my @blaha;
|
|
($cmd, @blaha)= getpart("client", "command");
|
|
|
|
# make some nice replace operations
|
|
$cmd =~ s/\n//g; # no newlines please
|
|
|
|
# substitute variables in the command line
|
|
subVariables \$cmd;
|
|
|
|
if($curl_debug) {
|
|
unlink($memdump);
|
|
}
|
|
|
|
# create a (possibly-empty) file before starting the test
|
|
my @inputfile=getpart("client", "file");
|
|
my %fileattr = getpartattr("client", "file");
|
|
my $filename=$fileattr{'name'};
|
|
if(@inputfile || $filename) {
|
|
if(!$filename) {
|
|
logmsg "ERROR: section client=>file has no name attribute\n";
|
|
timestampskippedevents($testnum);
|
|
return -1;
|
|
}
|
|
my $fileContent = join('', @inputfile);
|
|
subVariables \$fileContent;
|
|
# logmsg "DEBUG: writing file " . $filename . "\n";
|
|
open(OUTFILE, ">$filename");
|
|
binmode OUTFILE; # for crapage systems, use binary
|
|
print OUTFILE $fileContent;
|
|
close(OUTFILE);
|
|
}
|
|
|
|
my %cmdhash = getpartattr("client", "command");
|
|
|
|
my $out="";
|
|
|
|
if((!$cmdhash{'option'}) || ($cmdhash{'option'} !~ /no-output/)) {
|
|
#We may slap on --output!
|
|
if (!@validstdout) {
|
|
$out=" --output $CURLOUT ";
|
|
}
|
|
}
|
|
|
|
my $serverlogslocktimeout = $defserverlogslocktimeout;
|
|
if($cmdhash{'timeout'}) {
|
|
# test is allowed to override default server logs lock timeout
|
|
if($cmdhash{'timeout'} =~ /(\d+)/) {
|
|
$serverlogslocktimeout = $1 if($1 >= 0);
|
|
}
|
|
}
|
|
|
|
my $postcommanddelay = $defpostcommanddelay;
|
|
if($cmdhash{'delay'}) {
|
|
# test is allowed to specify a delay after command is executed
|
|
if($cmdhash{'delay'} =~ /(\d+)/) {
|
|
$postcommanddelay = $1 if($1 > 0);
|
|
}
|
|
}
|
|
|
|
my $cmdargs;
|
|
if(!$tool) {
|
|
# run curl, add --verbose for debug information output
|
|
$cmdargs ="$out --include --verbose --trace-time $cmd";
|
|
}
|
|
else {
|
|
$cmdargs = " $cmd"; # $cmd is the command line for the test file
|
|
$CURLOUT = $STDOUT; # sends received data to stdout
|
|
}
|
|
|
|
my @stdintest = getpart("client", "stdin");
|
|
|
|
if(@stdintest) {
|
|
my $stdinfile="$LOGDIR/stdin-for-$testnum";
|
|
writearray($stdinfile, \@stdintest);
|
|
|
|
$cmdargs .= " <$stdinfile";
|
|
}
|
|
my $CMDLINE;
|
|
|
|
if(!$tool) {
|
|
$CMDLINE="$CURL";
|
|
}
|
|
else {
|
|
$CMDLINE="$LIBDIR/$tool";
|
|
if(! -f $CMDLINE) {
|
|
print "The tool set in the test case for this: '$tool' does not exist\n";
|
|
timestampskippedevents($testnum);
|
|
return -1;
|
|
}
|
|
$DBGCURL=$CMDLINE;
|
|
}
|
|
|
|
my $usevalgrind;
|
|
if($valgrind) {
|
|
my @valgrindoption = getpart("verify", "valgrind");
|
|
if((!@valgrindoption) || ($valgrindoption[0] !~ /disable/)) {
|
|
$usevalgrind = 1;
|
|
my $valgrindcmd = "$valgrind ";
|
|
$valgrindcmd .= "$valgrind_tool " if($valgrind_tool);
|
|
$valgrindcmd .= "--leak-check=yes ";
|
|
$valgrindcmd .= "--num-callers=16 ";
|
|
$valgrindcmd .= "${valgrind_logfile}=$LOGDIR/valgrind$testnum";
|
|
$CMDLINE = "$valgrindcmd $CMDLINE";
|
|
}
|
|
}
|
|
|
|
$CMDLINE .= "$cmdargs >>$STDOUT 2>>$STDERR";
|
|
|
|
if($verbose) {
|
|
logmsg "$CMDLINE\n";
|
|
}
|
|
|
|
print CMDLOG "$CMDLINE\n";
|
|
|
|
unlink("core");
|
|
|
|
my $dumped_core;
|
|
my $cmdres;
|
|
|
|
# Apr 2007: precommand isn't being used and could be removed
|
|
my @precommand= getpart("client", "precommand");
|
|
if($precommand[0]) {
|
|
# this is pure perl to eval!
|
|
my $code = join("", @precommand);
|
|
eval $code;
|
|
if($@) {
|
|
logmsg "perl: $code\n";
|
|
logmsg "precommand: $@";
|
|
stopservers($verbose);
|
|
timestampskippedevents($testnum);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
if($gdbthis) {
|
|
my $gdbinit = "$TESTDIR/gdbinit$testnum";
|
|
open(GDBCMD, ">$LOGDIR/gdbcmd");
|
|
print GDBCMD "set args $cmdargs\n";
|
|
print GDBCMD "show args\n";
|
|
print GDBCMD "source $gdbinit\n" if -e $gdbinit;
|
|
close(GDBCMD);
|
|
}
|
|
|
|
# timestamp starting of test command
|
|
$timetoolini{$testnum} = Time::HiRes::time() if($timestats);
|
|
|
|
# run the command line we built
|
|
if ($torture) {
|
|
$cmdres = torture($CMDLINE,
|
|
"$gdb --directory libtest $DBGCURL -x $LOGDIR/gdbcmd");
|
|
}
|
|
elsif($gdbthis) {
|
|
runclient("$gdb --directory libtest $DBGCURL -x $LOGDIR/gdbcmd");
|
|
$cmdres=0; # makes it always continue after a debugged run
|
|
}
|
|
else {
|
|
$cmdres = runclient("$CMDLINE");
|
|
my $signal_num = $cmdres & 127;
|
|
$dumped_core = $cmdres & 128;
|
|
|
|
if(!$anyway && ($signal_num || $dumped_core)) {
|
|
$cmdres = 1000;
|
|
}
|
|
else {
|
|
$cmdres >>= 8;
|
|
$cmdres = (2000 + $signal_num) if($signal_num && !$cmdres);
|
|
}
|
|
}
|
|
|
|
# timestamp finishing of test command
|
|
$timetoolend{$testnum} = Time::HiRes::time() if($timestats);
|
|
|
|
if(!$dumped_core) {
|
|
if(-r "core") {
|
|
# there's core file present now!
|
|
$dumped_core = 1;
|
|
}
|
|
}
|
|
|
|
if($dumped_core) {
|
|
logmsg "core dumped\n";
|
|
if(0 && $gdb) {
|
|
logmsg "running gdb for post-mortem analysis:\n";
|
|
open(GDBCMD, ">$LOGDIR/gdbcmd2");
|
|
print GDBCMD "bt\n";
|
|
close(GDBCMD);
|
|
runclient("$gdb --directory libtest -x $LOGDIR/gdbcmd2 -batch $DBGCURL core ");
|
|
# unlink("$LOGDIR/gdbcmd2");
|
|
}
|
|
}
|
|
|
|
# If a server logs advisor read lock file exists, it is an indication
|
|
# that the server has not yet finished writing out all its log files,
|
|
# including server request log files used for protocol verification.
|
|
# So, if the lock file exists the script waits here a certain amount
|
|
# of time until the server removes it, or the given time expires.
|
|
|
|
if($serverlogslocktimeout) {
|
|
my $lockretry = $serverlogslocktimeout * 20;
|
|
while((-f $SERVERLOGS_LOCK) && $lockretry--) {
|
|
select(undef, undef, undef, 0.05);
|
|
}
|
|
if(($lockretry < 0) &&
|
|
($serverlogslocktimeout >= $defserverlogslocktimeout)) {
|
|
logmsg "Warning: server logs lock timeout ",
|
|
"($serverlogslocktimeout seconds) expired\n";
|
|
}
|
|
}
|
|
|
|
# Test harness ssh server does not have this synchronization mechanism,
|
|
# this implies that some ssh server based tests might need a small delay
|
|
# once that the client command has run to avoid false test failures.
|
|
|
|
sleep($postcommanddelay) if($postcommanddelay);
|
|
|
|
# timestamp removal of server logs advisor read lock
|
|
$timesrvrlog{$testnum} = Time::HiRes::time() if($timestats);
|
|
|
|
# test definition might instruct to stop some servers
|
|
# stop also all servers relative to the given one
|
|
|
|
my @killtestservers = getpart("client", "killserver");
|
|
if(@killtestservers) {
|
|
#
|
|
# All servers relative to the given one must be stopped also
|
|
#
|
|
my @killservers;
|
|
foreach my $server (@killtestservers) {
|
|
chomp $server;
|
|
if($server =~ /^(ftp|http|imap|pop3|smtp)s(.*)$/) {
|
|
# given an ssl server, also kill non-ssl underlying one
|
|
push @killservers, "${1}${2}";
|
|
}
|
|
elsif($server =~ /^(ftp|http|imap|pop3|smtp)(.*)$/) {
|
|
# given a non-ssl server, also kill ssl piggybacking one
|
|
push @killservers, "${1}s${2}";
|
|
}
|
|
elsif($server =~ /^(socks)(.*)$/) {
|
|
# given an socks server, also kill ssh underlying one
|
|
push @killservers, "ssh${2}";
|
|
}
|
|
elsif($server =~ /^(ssh)(.*)$/) {
|
|
# given an ssh server, also kill socks piggybacking one
|
|
push @killservers, "socks${2}";
|
|
}
|
|
push @killservers, $server;
|
|
}
|
|
#
|
|
# kill sockfilter processes for pingpong relative servers
|
|
#
|
|
foreach my $server (@killservers) {
|
|
if($server =~ /^(ftp|imap|pop3|smtp)s?(\d*)(-ipv6|)$/) {
|
|
my $proto = $1;
|
|
my $idnum = ($2 && ($2 > 1)) ? $2 : 1;
|
|
my $ipvnum = ($3 && ($3 =~ /6$/)) ? 6 : 4;
|
|
killsockfilters($proto, $ipvnum, $idnum, $verbose);
|
|
}
|
|
}
|
|
#
|
|
# kill server relative pids clearing them in %run hash
|
|
#
|
|
my $pidlist;
|
|
foreach my $server (@killservers) {
|
|
if($run{$server}) {
|
|
$pidlist .= "$run{$server} ";
|
|
$run{$server} = 0;
|
|
}
|
|
$runcert{$server} = 0 if($runcert{$server});
|
|
}
|
|
killpid($verbose, $pidlist);
|
|
#
|
|
# cleanup server pid files
|
|
#
|
|
foreach my $server (@killservers) {
|
|
my $pidfile = $serverpidfile{$server};
|
|
my $pid = processexists($pidfile);
|
|
if($pid > 0) {
|
|
logmsg "Warning: $server server unexpectedly alive\n";
|
|
killpid($verbose, $pid);
|
|
}
|
|
unlink($pidfile) if(-f $pidfile);
|
|
}
|
|
}
|
|
|
|
# remove the test server commands file after each test
|
|
unlink($FTPDCMD);
|
|
|
|
# run the postcheck command
|
|
my @postcheck= getpart("client", "postcheck");
|
|
if(@postcheck) {
|
|
$cmd = $postcheck[0];
|
|
chomp $cmd;
|
|
subVariables \$cmd;
|
|
if($cmd) {
|
|
logmsg "postcheck $cmd\n" if($verbose);
|
|
my $rc = runclient("$cmd");
|
|
# Must run the postcheck command in torture mode in order
|
|
# to clean up, but the result can't be relied upon.
|
|
if($rc != 0 && !$torture) {
|
|
logmsg " postcheck FAILED\n";
|
|
# timestamp test result verification end
|
|
$timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
|
|
return 1;
|
|
}
|
|
}
|
|
}
|
|
|
|
# restore environment variables that were modified
|
|
if(%oldenv) {
|
|
foreach my $var (keys %oldenv) {
|
|
if($oldenv{$var} eq 'notset') {
|
|
delete $ENV{$var} if($ENV{$var});
|
|
}
|
|
else {
|
|
$ENV{$var} = "$oldenv{$var}";
|
|
}
|
|
}
|
|
}
|
|
|
|
# Skip all the verification on torture tests
|
|
if ($torture) {
|
|
if(!$cmdres && !$keepoutfiles) {
|
|
cleardir($LOGDIR);
|
|
}
|
|
# timestamp test result verification end
|
|
$timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
|
|
return $cmdres;
|
|
}
|
|
|
|
my @err = getpart("verify", "errorcode");
|
|
my $errorcode = $err[0] || "0";
|
|
my $ok="";
|
|
my $res;
|
|
if (@validstdout) {
|
|
# verify redirected stdout
|
|
my @actual = loadarray($STDOUT);
|
|
|
|
# variable-replace in the stdout we have from the test case file
|
|
@validstdout = fixarray(@validstdout);
|
|
|
|
# get all attributes
|
|
my %hash = getpartattr("verify", "stdout");
|
|
|
|
# get the mode attribute
|
|
my $filemode=$hash{'mode'};
|
|
if($filemode && ($filemode eq "text") && $has_textaware) {
|
|
# text mode when running on windows: fix line endings
|
|
map s/\r\n/\n/g, @actual;
|
|
}
|
|
|
|
if($hash{'nonewline'}) {
|
|
# Yes, we must cut off the final newline from the final line
|
|
# of the protocol data
|
|
chomp($validstdout[$#validstdout]);
|
|
}
|
|
|
|
$res = compare("stdout", \@actual, \@validstdout);
|
|
if($res) {
|
|
# timestamp test result verification end
|
|
$timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
|
|
return 1;
|
|
}
|
|
$ok .= "s";
|
|
}
|
|
else {
|
|
$ok .= "-"; # stdout not checked
|
|
}
|
|
|
|
my %replyattr = getpartattr("reply", "data");
|
|
if(!$replyattr{'nocheck'} && (@reply || $replyattr{'sendzero'})) {
|
|
# verify the received data
|
|
my @out = loadarray($CURLOUT);
|
|
my %hash = getpartattr("reply", "data");
|
|
# get the mode attribute
|
|
my $filemode=$hash{'mode'};
|
|
if($filemode && ($filemode eq "text") && $has_textaware) {
|
|
# text mode when running on windows: fix line endings
|
|
map s/\r\n/\n/g, @out;
|
|
}
|
|
|
|
$res = compare("data", \@out, \@reply);
|
|
if ($res) {
|
|
# timestamp test result verification end
|
|
$timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
|
|
return 1;
|
|
}
|
|
$ok .= "d";
|
|
}
|
|
else {
|
|
$ok .= "-"; # data not checked
|
|
}
|
|
|
|
if(@upload) {
|
|
# verify uploaded data
|
|
my @out = loadarray("$LOGDIR/upload.$testnum");
|
|
$res = compare("upload", \@out, \@upload);
|
|
if ($res) {
|
|
# timestamp test result verification end
|
|
$timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
|
|
return 1;
|
|
}
|
|
$ok .= "u";
|
|
}
|
|
else {
|
|
$ok .= "-"; # upload not checked
|
|
}
|
|
|
|
if(@protocol) {
|
|
# Verify the sent request
|
|
my @out = loadarray($SERVERIN);
|
|
|
|
# what to cut off from the live protocol sent by curl
|
|
my @strip = getpart("verify", "strip");
|
|
|
|
my @protstrip=@protocol;
|
|
|
|
# check if there's any attributes on the verify/protocol section
|
|
my %hash = getpartattr("verify", "protocol");
|
|
|
|
if($hash{'nonewline'}) {
|
|
# Yes, we must cut off the final newline from the final line
|
|
# of the protocol data
|
|
chomp($protstrip[$#protstrip]);
|
|
}
|
|
|
|
for(@strip) {
|
|
# strip off all lines that match the patterns from both arrays
|
|
chomp $_;
|
|
@out = striparray( $_, \@out);
|
|
@protstrip= striparray( $_, \@protstrip);
|
|
}
|
|
|
|
# what parts to cut off from the protocol
|
|
my @strippart = getpart("verify", "strippart");
|
|
my $strip;
|
|
for $strip (@strippart) {
|
|
chomp $strip;
|
|
for(@out) {
|
|
eval $strip;
|
|
}
|
|
}
|
|
|
|
$res = compare("protocol", \@out, \@protstrip);
|
|
if($res) {
|
|
# timestamp test result verification end
|
|
$timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
|
|
return 1;
|
|
}
|
|
|
|
$ok .= "p";
|
|
|
|
}
|
|
else {
|
|
$ok .= "-"; # protocol not checked
|
|
}
|
|
|
|
my @outfile=getpart("verify", "file");
|
|
if(@outfile) {
|
|
# we're supposed to verify a dynamically generated file!
|
|
my %hash = getpartattr("verify", "file");
|
|
|
|
my $filename=$hash{'name'};
|
|
if(!$filename) {
|
|
logmsg "ERROR: section verify=>file has no name attribute\n";
|
|
stopservers($verbose);
|
|
# timestamp test result verification end
|
|
$timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
|
|
return -1;
|
|
}
|
|
my @generated=loadarray($filename);
|
|
|
|
# what parts to cut off from the file
|
|
my @stripfile = getpart("verify", "stripfile");
|
|
|
|
my $filemode=$hash{'mode'};
|
|
if($filemode && ($filemode eq "text") && $has_textaware) {
|
|
# text mode when running on windows means adding an extra
|
|
# strip expression
|
|
push @stripfile, "s/\r\n/\n/";
|
|
}
|
|
|
|
my $strip;
|
|
for $strip (@stripfile) {
|
|
chomp $strip;
|
|
for(@generated) {
|
|
eval $strip;
|
|
}
|
|
}
|
|
|
|
@outfile = fixarray(@outfile);
|
|
|
|
$res = compare("output", \@generated, \@outfile);
|
|
if($res) {
|
|
# timestamp test result verification end
|
|
$timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
|
|
return 1;
|
|
}
|
|
|
|
$ok .= "o";
|
|
}
|
|
else {
|
|
$ok .= "-"; # output not checked
|
|
}
|
|
|
|
# accept multiple comma-separated error codes
|
|
my @splerr = split(/ *, */, $errorcode);
|
|
my $errok;
|
|
foreach my $e (@splerr) {
|
|
if($e == $cmdres) {
|
|
# a fine error code
|
|
$errok = 1;
|
|
last;
|
|
}
|
|
}
|
|
|
|
if($errok) {
|
|
$ok .= "e";
|
|
}
|
|
else {
|
|
if(!$short) {
|
|
printf("\n%s returned $cmdres, %d was expected\n",
|
|
(!$tool)?"curl":$tool, $errorcode);
|
|
}
|
|
logmsg " exit FAILED\n";
|
|
# timestamp test result verification end
|
|
$timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
|
|
return 1;
|
|
}
|
|
|
|
if($curl_debug) {
|
|
if(! -f $memdump) {
|
|
logmsg "\n** ALERT! memory debugging with no output file?\n";
|
|
}
|
|
else {
|
|
my @memdata=`$memanalyze $memdump`;
|
|
my $leak=0;
|
|
for(@memdata) {
|
|
if($_ ne "") {
|
|
# well it could be other memory problems as well, but
|
|
# we call it leak for short here
|
|
$leak=1;
|
|
}
|
|
}
|
|
if($leak) {
|
|
logmsg "\n** MEMORY FAILURE\n";
|
|
logmsg @memdata;
|
|
# timestamp test result verification end
|
|
$timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
|
|
return 1;
|
|
}
|
|
else {
|
|
$ok .= "m";
|
|
}
|
|
}
|
|
}
|
|
else {
|
|
$ok .= "-"; # memory not checked
|
|
}
|
|
|
|
if($valgrind) {
|
|
if($usevalgrind) {
|
|
unless(opendir(DIR, "$LOGDIR")) {
|
|
logmsg "ERROR: unable to read $LOGDIR\n";
|
|
# timestamp test result verification end
|
|
$timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
|
|
return 1;
|
|
}
|
|
my @files = readdir(DIR);
|
|
closedir(DIR);
|
|
my $vgfile;
|
|
foreach my $file (@files) {
|
|
if($file =~ /^valgrind$testnum(\..*|)$/) {
|
|
$vgfile = $file;
|
|
last;
|
|
}
|
|
}
|
|
if(!$vgfile) {
|
|
logmsg "ERROR: valgrind log file missing for test $testnum\n";
|
|
# timestamp test result verification end
|
|
$timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
|
|
return 1;
|
|
}
|
|
my @e = valgrindparse($srcdir, $feature{'SSL'}, "$LOGDIR/$vgfile");
|
|
if(@e && $e[0]) {
|
|
logmsg " valgrind ERROR ";
|
|
logmsg @e;
|
|
# timestamp test result verification end
|
|
$timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
|
|
return 1;
|
|
}
|
|
$ok .= "v";
|
|
}
|
|
else {
|
|
if(!$short) {
|
|
logmsg " valgrind SKIPPED\n";
|
|
}
|
|
$ok .= "-"; # skipped
|
|
}
|
|
}
|
|
else {
|
|
$ok .= "-"; # valgrind not checked
|
|
}
|
|
|
|
logmsg "$ok " if(!$short);
|
|
|
|
my $sofar= time()-$start;
|
|
my $esttotal = $sofar/$count * $total;
|
|
my $estleft = $esttotal - $sofar;
|
|
my $left=sprintf("remaining: %02d:%02d",
|
|
$estleft/60,
|
|
$estleft%60);
|
|
printf "OK (%-3d out of %-3d, %s)\n", $count, $total, $left;
|
|
|
|
# the test succeeded, remove all log files
|
|
if(!$keepoutfiles) {
|
|
cleardir($LOGDIR);
|
|
}
|
|
|
|
# timestamp test result verification end
|
|
$timevrfyend{$testnum} = Time::HiRes::time() if($timestats);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#######################################################################
|
|
# Stop all running test servers
|
|
sub stopservers {
|
|
my $verbose = $_[0];
|
|
#
|
|
# kill sockfilter processes for all pingpong servers
|
|
#
|
|
killallsockfilters($verbose);
|
|
#
|
|
# kill all server pids from %run hash clearing them
|
|
#
|
|
my $pidlist;
|
|
foreach my $server (keys %run) {
|
|
if($run{$server}) {
|
|
if($verbose) {
|
|
my $prev = 0;
|
|
my $pids = $run{$server};
|
|
foreach my $pid (split(' ', $pids)) {
|
|
if($pid != $prev) {
|
|
logmsg sprintf("* kill pid for %s => %d\n",
|
|
$server, $pid);
|
|
$prev = $pid;
|
|
}
|
|
}
|
|
}
|
|
$pidlist .= "$run{$server} ";
|
|
$run{$server} = 0;
|
|
}
|
|
$runcert{$server} = 0 if($runcert{$server});
|
|
}
|
|
killpid($verbose, $pidlist);
|
|
#
|
|
# cleanup all server pid files
|
|
#
|
|
foreach my $server (keys %serverpidfile) {
|
|
my $pidfile = $serverpidfile{$server};
|
|
my $pid = processexists($pidfile);
|
|
if($pid > 0) {
|
|
logmsg "Warning: $server server unexpectedly alive\n";
|
|
killpid($verbose, $pid);
|
|
}
|
|
unlink($pidfile) if(-f $pidfile);
|
|
}
|
|
}
|
|
|
|
#######################################################################
|
|
# startservers() starts all the named servers
|
|
#
|
|
# Returns: string with error reason or blank for success
|
|
|
|
sub startservers {
|
|
my @what = @_;
|
|
my ($pid, $pid2);
|
|
for(@what) {
|
|
my (@whatlist) = split(/\s+/,$_);
|
|
my $what = lc($whatlist[0]);
|
|
$what =~ s/[^a-z0-9-]//g;
|
|
|
|
my $certfile;
|
|
if($what =~ /^(ftp|http|imap|pop3|smtp)s(.*)$/) {
|
|
$certfile = ($whatlist[1]) ? $whatlist[1] : 'stunnel.pem';
|
|
}
|
|
|
|
if(($what eq "pop3") ||
|
|
($what eq "ftp") ||
|
|
($what eq "imap") ||
|
|
($what eq "smtp")) {
|
|
if(!$run{$what}) {
|
|
($pid, $pid2) = runpingpongserver($what, "", $verbose);
|
|
if($pid <= 0) {
|
|
return "failed starting ". uc($what) ." server";
|
|
}
|
|
printf ("* pid $what => %d %d\n", $pid, $pid2) if($verbose);
|
|
$run{$what}="$pid $pid2";
|
|
}
|
|
}
|
|
elsif($what eq "ftp2") {
|
|
if(!$run{'ftp2'}) {
|
|
($pid, $pid2) = runpingpongserver("ftp", "2", $verbose);
|
|
if($pid <= 0) {
|
|
return "failed starting FTP2 server";
|
|
}
|
|
printf ("* pid ftp2 => %d %d\n", $pid, $pid2) if($verbose);
|
|
$run{'ftp2'}="$pid $pid2";
|
|
}
|
|
}
|
|
elsif($what eq "ftp-ipv6") {
|
|
if(!$run{'ftp-ipv6'}) {
|
|
($pid, $pid2) = runpingpongserver("ftp", "", $verbose, "ipv6");
|
|
if($pid <= 0) {
|
|
return "failed starting FTP-IPv6 server";
|
|
}
|
|
logmsg sprintf("* pid ftp-ipv6 => %d %d\n", $pid,
|
|
$pid2) if($verbose);
|
|
$run{'ftp-ipv6'}="$pid $pid2";
|
|
}
|
|
}
|
|
elsif($what eq "http") {
|
|
if(!$run{'http'}) {
|
|
($pid, $pid2) = runhttpserver($verbose);
|
|
if($pid <= 0) {
|
|
return "failed starting HTTP server";
|
|
}
|
|
printf ("* pid http => %d %d\n", $pid, $pid2) if($verbose);
|
|
$run{'http'}="$pid $pid2";
|
|
}
|
|
}
|
|
elsif($what eq "http-ipv6") {
|
|
if(!$run{'http-ipv6'}) {
|
|
($pid, $pid2) = runhttpserver($verbose, "IPv6");
|
|
if($pid <= 0) {
|
|
return "failed starting HTTP-IPv6 server";
|
|
}
|
|
logmsg sprintf("* pid http-ipv6 => %d %d\n", $pid, $pid2)
|
|
if($verbose);
|
|
$run{'http-ipv6'}="$pid $pid2";
|
|
}
|
|
}
|
|
elsif($what eq "rtsp") {
|
|
if(!$run{'rtsp'}) {
|
|
($pid, $pid2) = runrtspserver($verbose);
|
|
if($pid <= 0) {
|
|
return "failed starting RTSP server";
|
|
}
|
|
printf ("* pid rtsp => %d %d\n", $pid, $pid2) if($verbose);
|
|
$run{'rtsp'}="$pid $pid2";
|
|
}
|
|
}
|
|
elsif($what eq "rtsp-ipv6") {
|
|
if(!$run{'rtsp-ipv6'}) {
|
|
($pid, $pid2) = runrtspserver($verbose, "IPv6");
|
|
if($pid <= 0) {
|
|
return "failed starting RTSP-IPv6 server";
|
|
}
|
|
logmsg sprintf("* pid rtsp-ipv6 => %d %d\n", $pid, $pid2)
|
|
if($verbose);
|
|
$run{'rtsp-ipv6'}="$pid $pid2";
|
|
}
|
|
}
|
|
|
|
elsif($what eq "ftps") {
|
|
if(!$stunnel) {
|
|
# we can't run ftps tests without stunnel
|
|
return "no stunnel";
|
|
}
|
|
if(!$ssl_version) {
|
|
# we can't run ftps tests if libcurl is SSL-less
|
|
return "curl lacks SSL support";
|
|
}
|
|
if($runcert{'ftps'} && ($runcert{'ftps'} ne $certfile)) {
|
|
# stop server when running and using a different cert
|
|
stopserver('ftps');
|
|
}
|
|
if(!$run{'ftp'}) {
|
|
($pid, $pid2) = runpingpongserver("ftp", "", $verbose);
|
|
if($pid <= 0) {
|
|
return "failed starting FTP server";
|
|
}
|
|
printf ("* pid ftp => %d %d\n", $pid, $pid2) if($verbose);
|
|
$run{'ftp'}="$pid $pid2";
|
|
}
|
|
if(!$run{'ftps'}) {
|
|
($pid, $pid2) = runftpsserver($verbose, "", $certfile);
|
|
if($pid <= 0) {
|
|
return "failed starting FTPS server (stunnel)";
|
|
}
|
|
logmsg sprintf("* pid ftps => %d %d\n", $pid, $pid2)
|
|
if($verbose);
|
|
$run{'ftps'}="$pid $pid2";
|
|
}
|
|
}
|
|
elsif($what eq "file") {
|
|
# we support it but have no server!
|
|
}
|
|
elsif($what eq "https") {
|
|
if(!$stunnel) {
|
|
# we can't run ftps tests without stunnel
|
|
return "no stunnel";
|
|
}
|
|
if(!$ssl_version) {
|
|
# we can't run ftps tests if libcurl is SSL-less
|
|
return "curl lacks SSL support";
|
|
}
|
|
if($runcert{'https'} && ($runcert{'https'} ne $certfile)) {
|
|
# stop server when running and using a different cert
|
|
stopserver('https');
|
|
}
|
|
if(!$run{'http'}) {
|
|
($pid, $pid2) = runhttpserver($verbose);
|
|
if($pid <= 0) {
|
|
return "failed starting HTTP server";
|
|
}
|
|
printf ("* pid http => %d %d\n", $pid, $pid2) if($verbose);
|
|
$run{'http'}="$pid $pid2";
|
|
}
|
|
if(!$run{'https'}) {
|
|
($pid, $pid2) = runhttpsserver($verbose, "", $certfile);
|
|
if($pid <= 0) {
|
|
return "failed starting HTTPS server (stunnel)";
|
|
}
|
|
logmsg sprintf("* pid https => %d %d\n", $pid, $pid2)
|
|
if($verbose);
|
|
$run{'https'}="$pid $pid2";
|
|
}
|
|
}
|
|
elsif($what eq "tftp") {
|
|
if(!$run{'tftp'}) {
|
|
($pid, $pid2) = runtftpserver("", $verbose);
|
|
if($pid <= 0) {
|
|
return "failed starting TFTP server";
|
|
}
|
|
printf ("* pid tftp => %d %d\n", $pid, $pid2) if($verbose);
|
|
$run{'tftp'}="$pid $pid2";
|
|
}
|
|
}
|
|
elsif($what eq "tftp-ipv6") {
|
|
if(!$run{'tftp-ipv6'}) {
|
|
($pid, $pid2) = runtftpserver("", $verbose, "IPv6");
|
|
if($pid <= 0) {
|
|
return "failed starting TFTP-IPv6 server";
|
|
}
|
|
printf("* pid tftp-ipv6 => %d %d\n", $pid, $pid2) if($verbose);
|
|
$run{'tftp-ipv6'}="$pid $pid2";
|
|
}
|
|
}
|
|
elsif($what eq "sftp" || $what eq "scp" || $what eq "socks4" || $what eq "socks5" ) {
|
|
if(!$run{'ssh'}) {
|
|
($pid, $pid2) = runsshserver("", $verbose);
|
|
if($pid <= 0) {
|
|
return "failed starting SSH server";
|
|
}
|
|
printf ("* pid ssh => %d %d\n", $pid, $pid2) if($verbose);
|
|
$run{'ssh'}="$pid $pid2";
|
|
}
|
|
if($what eq "socks4" || $what eq "socks5") {
|
|
if(!$run{'socks'}) {
|
|
($pid, $pid2) = runsocksserver("", $verbose);
|
|
if($pid <= 0) {
|
|
return "failed starting socks server";
|
|
}
|
|
printf ("* pid socks => %d %d\n", $pid, $pid2) if($verbose);
|
|
$run{'socks'}="$pid $pid2";
|
|
}
|
|
}
|
|
if($what eq "socks5") {
|
|
if(!$sshdid) {
|
|
# Not an OpenSSH or SunSSH ssh daemon
|
|
logmsg "Not OpenSSH or SunSSH; socks5 tests need at least OpenSSH 3.7\n";
|
|
return "failed starting socks5 server";
|
|
}
|
|
elsif(($sshdid =~ /OpenSSH/) && ($sshdvernum < 370)) {
|
|
# Need OpenSSH 3.7 for socks5 - http://www.openssh.com/txt/release-3.7
|
|
logmsg "$sshdverstr insufficient; socks5 tests need at least OpenSSH 3.7\n";
|
|
return "failed starting socks5 server";
|
|
}
|
|
elsif(($sshdid =~ /SunSSH/) && ($sshdvernum < 100)) {
|
|
# Need SunSSH 1.0 for socks5
|
|
logmsg "$sshdverstr insufficient; socks5 tests need at least SunSSH 1.0\n";
|
|
return "failed starting socks5 server";
|
|
}
|
|
}
|
|
}
|
|
elsif($what eq "none") {
|
|
logmsg "* starts no server\n" if ($verbose);
|
|
}
|
|
else {
|
|
warn "we don't support a server for $what";
|
|
return "no server for $what";
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
##############################################################################
|
|
# This function makes sure the right set of server is running for the
|
|
# specified test case. This is a useful design when we run single tests as not
|
|
# all servers need to run then!
|
|
#
|
|
# Returns: a string, blank if everything is fine or a reason why it failed
|
|
#
|
|
|
|
sub serverfortest {
|
|
my ($testnum)=@_;
|
|
|
|
my @what = getpart("client", "server");
|
|
|
|
if(!$what[0]) {
|
|
warn "Test case $testnum has no server(s) specified";
|
|
return "no server specified";
|
|
}
|
|
|
|
for (@what) {
|
|
my $proto = lc($_);
|
|
chomp $proto;
|
|
$proto =~ s/\s.*//g; # take first word
|
|
if (! grep /^$proto$/, @protocols) {
|
|
if (substr($proto,0,5) ne "socks") {
|
|
return "curl lacks $proto support";
|
|
}
|
|
}
|
|
}
|
|
|
|
return &startservers(@what);
|
|
}
|
|
|
|
#######################################################################
|
|
# runtimestats displays test-suite run time statistics
|
|
#
|
|
sub runtimestats {
|
|
my $lasttest = $_[0];
|
|
|
|
return if(not $timestats);
|
|
|
|
logmsg "\nTest suite total running time breakdown per task...\n\n";
|
|
|
|
my @timesrvr;
|
|
my @timeprep;
|
|
my @timetool;
|
|
my @timelock;
|
|
my @timevrfy;
|
|
my @timetest;
|
|
my $timesrvrtot = 0.0;
|
|
my $timepreptot = 0.0;
|
|
my $timetooltot = 0.0;
|
|
my $timelocktot = 0.0;
|
|
my $timevrfytot = 0.0;
|
|
my $timetesttot = 0.0;
|
|
my $counter;
|
|
|
|
for my $testnum (1 .. $lasttest) {
|
|
if($timesrvrini{$testnum}) {
|
|
$timesrvrtot += $timesrvrend{$testnum} - $timesrvrini{$testnum};
|
|
$timepreptot +=
|
|
(($timetoolini{$testnum} - $timeprepini{$testnum}) -
|
|
($timesrvrend{$testnum} - $timesrvrini{$testnum}));
|
|
$timetooltot += $timetoolend{$testnum} - $timetoolini{$testnum};
|
|
$timelocktot += $timesrvrlog{$testnum} - $timetoolend{$testnum};
|
|
$timevrfytot += $timevrfyend{$testnum} - $timesrvrlog{$testnum};
|
|
$timetesttot += $timevrfyend{$testnum} - $timeprepini{$testnum};
|
|
push @timesrvr, sprintf("%06.3f %04d",
|
|
$timesrvrend{$testnum} - $timesrvrini{$testnum}, $testnum);
|
|
push @timeprep, sprintf("%06.3f %04d",
|
|
($timetoolini{$testnum} - $timeprepini{$testnum}) -
|
|
($timesrvrend{$testnum} - $timesrvrini{$testnum}), $testnum);
|
|
push @timetool, sprintf("%06.3f %04d",
|
|
$timetoolend{$testnum} - $timetoolini{$testnum}, $testnum);
|
|
push @timelock, sprintf("%06.3f %04d",
|
|
$timesrvrlog{$testnum} - $timetoolend{$testnum}, $testnum);
|
|
push @timevrfy, sprintf("%06.3f %04d",
|
|
$timevrfyend{$testnum} - $timesrvrlog{$testnum}, $testnum);
|
|
push @timetest, sprintf("%06.3f %04d",
|
|
$timevrfyend{$testnum} - $timeprepini{$testnum}, $testnum);
|
|
}
|
|
}
|
|
|
|
{
|
|
no warnings 'numeric';
|
|
@timesrvr = sort { $b <=> $a } @timesrvr;
|
|
@timeprep = sort { $b <=> $a } @timeprep;
|
|
@timetool = sort { $b <=> $a } @timetool;
|
|
@timelock = sort { $b <=> $a } @timelock;
|
|
@timevrfy = sort { $b <=> $a } @timevrfy;
|
|
@timetest = sort { $b <=> $a } @timetest;
|
|
}
|
|
|
|
logmsg "Spent ". sprintf("%08.3f ", $timesrvrtot) .
|
|
"seconds starting and verifying test harness servers.\n";
|
|
logmsg "Spent ". sprintf("%08.3f ", $timepreptot) .
|
|
"seconds reading definitions and doing test preparations.\n";
|
|
logmsg "Spent ". sprintf("%08.3f ", $timetooltot) .
|
|
"seconds actually running test tools.\n";
|
|
logmsg "Spent ". sprintf("%08.3f ", $timelocktot) .
|
|
"seconds awaiting server logs lock removal.\n";
|
|
logmsg "Spent ". sprintf("%08.3f ", $timevrfytot) .
|
|
"seconds verifying test results.\n";
|
|
logmsg "Spent ". sprintf("%08.3f ", $timetesttot) .
|
|
"seconds doing all of the above.\n";
|
|
|
|
$counter = 25;
|
|
logmsg "\nTest server starting and verification time per test ".
|
|
sprintf("(%s)...\n\n", (not $fullstats)?"top $counter":"full");
|
|
logmsg "-time- test\n";
|
|
logmsg "------ ----\n";
|
|
foreach my $txt (@timesrvr) {
|
|
last if((not $fullstats) && (not $counter--));
|
|
logmsg "$txt\n";
|
|
}
|
|
|
|
$counter = 10;
|
|
logmsg "\nTest definition reading and preparation time per test ".
|
|
sprintf("(%s)...\n\n", (not $fullstats)?"top $counter":"full");
|
|
logmsg "-time- test\n";
|
|
logmsg "------ ----\n";
|
|
foreach my $txt (@timeprep) {
|
|
last if((not $fullstats) && (not $counter--));
|
|
logmsg "$txt\n";
|
|
}
|
|
|
|
$counter = 25;
|
|
logmsg "\nTest tool execution time per test ".
|
|
sprintf("(%s)...\n\n", (not $fullstats)?"top $counter":"full");
|
|
logmsg "-time- test\n";
|
|
logmsg "------ ----\n";
|
|
foreach my $txt (@timetool) {
|
|
last if((not $fullstats) && (not $counter--));
|
|
logmsg "$txt\n";
|
|
}
|
|
|
|
$counter = 15;
|
|
logmsg "\nTest server logs lock removal time per test ".
|
|
sprintf("(%s)...\n\n", (not $fullstats)?"top $counter":"full");
|
|
logmsg "-time- test\n";
|
|
logmsg "------ ----\n";
|
|
foreach my $txt (@timelock) {
|
|
last if((not $fullstats) && (not $counter--));
|
|
logmsg "$txt\n";
|
|
}
|
|
|
|
$counter = 10;
|
|
logmsg "\nTest results verification time per test ".
|
|
sprintf("(%s)...\n\n", (not $fullstats)?"top $counter":"full");
|
|
logmsg "-time- test\n";
|
|
logmsg "------ ----\n";
|
|
foreach my $txt (@timevrfy) {
|
|
last if((not $fullstats) && (not $counter--));
|
|
logmsg "$txt\n";
|
|
}
|
|
|
|
$counter = 50;
|
|
logmsg "\nTotal time per test ".
|
|
sprintf("(%s)...\n\n", (not $fullstats)?"top $counter":"full");
|
|
logmsg "-time- test\n";
|
|
logmsg "------ ----\n";
|
|
foreach my $txt (@timetest) {
|
|
last if((not $fullstats) && (not $counter--));
|
|
logmsg "$txt\n";
|
|
}
|
|
|
|
logmsg "\n";
|
|
}
|
|
|
|
#######################################################################
|
|
# Check options to this test program
|
|
#
|
|
|
|
my $number=0;
|
|
my $fromnum=-1;
|
|
my @testthis;
|
|
my %disabled;
|
|
while(@ARGV) {
|
|
if ($ARGV[0] eq "-v") {
|
|
# verbose output
|
|
$verbose=1;
|
|
}
|
|
elsif($ARGV[0] =~ /^-b(.*)/) {
|
|
my $portno=$1;
|
|
if($portno =~ s/(\d+)$//) {
|
|
$base = int $1;
|
|
}
|
|
}
|
|
elsif ($ARGV[0] eq "-c") {
|
|
# use this path to curl instead of default
|
|
$DBGCURL=$CURL=$ARGV[1];
|
|
shift @ARGV;
|
|
}
|
|
elsif ($ARGV[0] eq "-d") {
|
|
# have the servers display protocol output
|
|
$debugprotocol=1;
|
|
}
|
|
elsif ($ARGV[0] eq "-f") {
|
|
# run fork-servers, which makes the server fork for all new
|
|
# connections This is NOT what you wanna do without knowing exactly
|
|
# why and for what
|
|
$forkserver=1;
|
|
}
|
|
elsif ($ARGV[0] eq "-g") {
|
|
# run this test with gdb
|
|
$gdbthis=1;
|
|
}
|
|
elsif($ARGV[0] eq "-s") {
|
|
# short output
|
|
$short=1;
|
|
}
|
|
elsif($ARGV[0] eq "-n") {
|
|
# no valgrind
|
|
undef $valgrind;
|
|
}
|
|
elsif($ARGV[0] =~ /^-t(.*)/) {
|
|
# torture
|
|
$torture=1;
|
|
my $xtra = $1;
|
|
|
|
if($xtra =~ s/(\d+)$//) {
|
|
$tortalloc = $1;
|
|
}
|
|
# we undef valgrind to make this fly in comparison
|
|
undef $valgrind;
|
|
}
|
|
elsif($ARGV[0] eq "-a") {
|
|
# continue anyway, even if a test fail
|
|
$anyway=1;
|
|
}
|
|
elsif($ARGV[0] eq "-p") {
|
|
$postmortem=1;
|
|
}
|
|
elsif($ARGV[0] eq "-l") {
|
|
# lists the test case names only
|
|
$listonly=1;
|
|
}
|
|
elsif($ARGV[0] eq "-k") {
|
|
# keep stdout and stderr files after tests
|
|
$keepoutfiles=1;
|
|
}
|
|
elsif($ARGV[0] eq "-r") {
|
|
# run time statistics needs Time::HiRes
|
|
if($Time::HiRes::VERSION) {
|
|
keys(%timeprepini) = 1000;
|
|
keys(%timesrvrini) = 1000;
|
|
keys(%timesrvrend) = 1000;
|
|
keys(%timetoolini) = 1000;
|
|
keys(%timetoolend) = 1000;
|
|
keys(%timesrvrlog) = 1000;
|
|
keys(%timevrfyend) = 1000;
|
|
$timestats=1;
|
|
$fullstats=0;
|
|
}
|
|
}
|
|
elsif($ARGV[0] eq "-rf") {
|
|
# run time statistics needs Time::HiRes
|
|
if($Time::HiRes::VERSION) {
|
|
keys(%timeprepini) = 1000;
|
|
keys(%timesrvrini) = 1000;
|
|
keys(%timesrvrend) = 1000;
|
|
keys(%timetoolini) = 1000;
|
|
keys(%timetoolend) = 1000;
|
|
keys(%timesrvrlog) = 1000;
|
|
keys(%timevrfyend) = 1000;
|
|
$timestats=1;
|
|
$fullstats=1;
|
|
}
|
|
}
|
|
elsif(($ARGV[0] eq "-h") || ($ARGV[0] eq "--help")) {
|
|
# show help text
|
|
print <<EOHELP
|
|
Usage: runtests.pl [options] [test selection(s)]
|
|
-a continue even if a test fails
|
|
-bN use base port number N for test servers (default $base)
|
|
-c path use this curl executable
|
|
-d display server debug info
|
|
-g run the test case with gdb
|
|
-h this help text
|
|
-k keep stdout and stderr files present after tests
|
|
-l list all test case names/descriptions
|
|
-n no valgrind
|
|
-p print log file contents when a test fails
|
|
-r run time statistics
|
|
-rf full run time statistics
|
|
-s short output
|
|
-t[N] torture (simulate memory alloc failures); N means fail Nth alloc
|
|
-v verbose output
|
|
[num] like "5 6 9" or " 5 to 22 " to run those tests only
|
|
[!num] like "!5 !6 !9" to disable those tests
|
|
[keyword] like "IPv6" to select only tests containing the key word
|
|
[!keyword] like "!cookies" to disable any tests containing the key word
|
|
EOHELP
|
|
;
|
|
exit;
|
|
}
|
|
elsif($ARGV[0] =~ /^(\d+)/) {
|
|
$number = $1;
|
|
if($fromnum >= 0) {
|
|
for($fromnum .. $number) {
|
|
push @testthis, $_;
|
|
}
|
|
$fromnum = -1;
|
|
}
|
|
else {
|
|
push @testthis, $1;
|
|
}
|
|
}
|
|
elsif($ARGV[0] =~ /^to$/i) {
|
|
$fromnum = $number+1;
|
|
}
|
|
elsif($ARGV[0] =~ /^!(\d+)/) {
|
|
$fromnum = -1;
|
|
$disabled{$1}=$1;
|
|
}
|
|
elsif($ARGV[0] =~ /^!(.+)/) {
|
|
$disabled_keywords{$1}=$1;
|
|
}
|
|
elsif($ARGV[0] =~ /^([-[{a-zA-Z].*)/) {
|
|
$enabled_keywords{$1}=$1;
|
|
}
|
|
else {
|
|
print "Unknown option: $ARGV[0]\n";
|
|
exit;
|
|
}
|
|
shift @ARGV;
|
|
}
|
|
|
|
if(@testthis && ($testthis[0] ne "")) {
|
|
$TESTCASES=join(" ", @testthis);
|
|
}
|
|
|
|
if($valgrind) {
|
|
# we have found valgrind on the host, use it
|
|
|
|
# verify that we can invoke it fine
|
|
my $code = runclient("valgrind >/dev/null 2>&1");
|
|
|
|
if(($code>>8) != 1) {
|
|
#logmsg "Valgrind failure, disable it\n";
|
|
undef $valgrind;
|
|
} else {
|
|
|
|
# since valgrind 2.1.x, '--tool' option is mandatory
|
|
# use it, if it is supported by the version installed on the system
|
|
runclient("valgrind --help 2>&1 | grep -- --tool > /dev/null 2>&1");
|
|
if (($? >> 8)==0) {
|
|
$valgrind_tool="--tool=memcheck";
|
|
}
|
|
open(C, "<$CURL");
|
|
my $l = <C>;
|
|
if($l =~ /^\#\!/) {
|
|
# A shell script. This is typically when built with libtool,
|
|
$valgrind="../libtool --mode=execute $valgrind";
|
|
}
|
|
close(C);
|
|
|
|
# valgrind 3 renamed the --logfile option to --log-file!!!
|
|
my $ver=join(' ', runclientoutput("valgrind --version"));
|
|
# cut off all but digits and dots
|
|
$ver =~ s/[^0-9.]//g;
|
|
|
|
if($ver =~ /^(\d+)/) {
|
|
$ver = $1;
|
|
if($ver >= 3) {
|
|
$valgrind_logfile="--log-file";
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if ($gdbthis) {
|
|
# open the executable curl and read the first 4 bytes of it
|
|
open(CHECK, "<$CURL");
|
|
my $c;
|
|
sysread CHECK, $c, 4;
|
|
close(CHECK);
|
|
if($c eq "#! /") {
|
|
# A shell script. This is typically when built with libtool,
|
|
$libtool = 1;
|
|
$gdb = "libtool --mode=execute gdb";
|
|
}
|
|
}
|
|
|
|
$HTTPPORT = $base++; # HTTP server port
|
|
$HTTPSPORT = $base++; # HTTPS server port
|
|
$FTPPORT = $base++; # FTP server port
|
|
$FTPSPORT = $base++; # FTPS server port
|
|
$HTTP6PORT = $base++; # HTTP IPv6 server port (different IP protocol
|
|
# but we follow the same port scheme anyway)
|
|
$FTP2PORT = $base++; # FTP server 2 port
|
|
$FTP6PORT = $base++; # FTP IPv6 port
|
|
$TFTPPORT = $base++; # TFTP (UDP) port
|
|
$TFTP6PORT = $base++; # TFTP IPv6 (UDP) port
|
|
$SSHPORT = $base++; # SSH (SCP/SFTP) port
|
|
$SOCKSPORT = $base++; # SOCKS port
|
|
$POP3PORT = $base++;
|
|
$POP36PORT = $base++;
|
|
$IMAPPORT = $base++;
|
|
$IMAP6PORT = $base++;
|
|
$SMTPPORT = $base++;
|
|
$SMTP6PORT = $base++;
|
|
$RTSPPORT = $base++;
|
|
$RTSP6PORT = $base++;
|
|
|
|
#######################################################################
|
|
# clear and create logging directory:
|
|
#
|
|
|
|
cleardir($LOGDIR);
|
|
mkdir($LOGDIR, 0777);
|
|
|
|
#######################################################################
|
|
# initialize some variables
|
|
#
|
|
|
|
get_disttests();
|
|
init_serverpidfile_hash();
|
|
|
|
#######################################################################
|
|
# Output curl version and host info being tested
|
|
#
|
|
|
|
if(!$listonly) {
|
|
checksystem();
|
|
}
|
|
|
|
#######################################################################
|
|
# If 'all' tests are requested, find out all test numbers
|
|
#
|
|
|
|
if ( $TESTCASES eq "all") {
|
|
# Get all commands and find out their test numbers
|
|
opendir(DIR, $TESTDIR) || die "can't opendir $TESTDIR: $!";
|
|
my @cmds = grep { /^test([0-9]+)$/ && -f "$TESTDIR/$_" } readdir(DIR);
|
|
closedir(DIR);
|
|
|
|
open(D, "<$TESTDIR/DISABLED");
|
|
while(<D>) {
|
|
if(/^ *\#/) {
|
|
# allow comments
|
|
next;
|
|
}
|
|
if($_ =~ /(\d+)/) {
|
|
$disabled{$1}=$1; # disable this test number
|
|
}
|
|
}
|
|
close(D);
|
|
|
|
$TESTCASES=""; # start with no test cases
|
|
|
|
# cut off everything but the digits
|
|
for(@cmds) {
|
|
$_ =~ s/[a-z\/\.]*//g;
|
|
}
|
|
# sort the numbers from low to high
|
|
foreach my $n (sort { $a <=> $b } @cmds) {
|
|
if($disabled{$n}) {
|
|
# skip disabled test cases
|
|
my $why = "configured as DISABLED";
|
|
$skipped++;
|
|
$skipped{$why}++;
|
|
$teststat[$n]=$why; # store reason for this test case
|
|
next;
|
|
}
|
|
$TESTCASES .= " $n";
|
|
}
|
|
}
|
|
|
|
#######################################################################
|
|
# Start the command line log
|
|
#
|
|
open(CMDLOG, ">$CURLLOG") ||
|
|
logmsg "can't log command lines to $CURLLOG\n";
|
|
|
|
#######################################################################
|
|
|
|
# Display the contents of the given file. Line endings are canonicalized
|
|
# and excessively long files are elided
|
|
sub displaylogcontent {
|
|
my ($file)=@_;
|
|
if(open(SINGLE, "<$file")) {
|
|
my $linecount = 0;
|
|
my $truncate;
|
|
my @tail;
|
|
while(my $string = <SINGLE>) {
|
|
$string =~ s/\r\n/\n/g;
|
|
$string =~ s/[\r\f\032]/\n/g;
|
|
$string .= "\n" unless ($string =~ /\n$/);
|
|
$string =~ tr/\n//;
|
|
for my $line (split("\n", $string)) {
|
|
$line =~ s/\s*\!$//;
|
|
if ($truncate) {
|
|
push @tail, " $line\n";
|
|
} else {
|
|
logmsg " $line\n";
|
|
}
|
|
$linecount++;
|
|
$truncate = $linecount > 1000;
|
|
}
|
|
}
|
|
if(@tail) {
|
|
my $tailshow = 200;
|
|
my $tailskip = 0;
|
|
my $tailtotal = scalar @tail;
|
|
if($tailtotal > $tailshow) {
|
|
$tailskip = $tailtotal - $tailshow;
|
|
logmsg "=== File too long: $tailskip lines omitted here\n";
|
|
}
|
|
for($tailskip .. $tailtotal-1) {
|
|
logmsg "$tail[$_]";
|
|
}
|
|
}
|
|
close(SINGLE);
|
|
}
|
|
}
|
|
|
|
sub displaylogs {
|
|
my ($testnum)=@_;
|
|
opendir(DIR, "$LOGDIR") ||
|
|
die "can't open dir: $!";
|
|
my @logs = readdir(DIR);
|
|
closedir(DIR);
|
|
|
|
logmsg "== Contents of files in the $LOGDIR/ dir after test $testnum\n";
|
|
foreach my $log (sort @logs) {
|
|
if($log =~ /\.(\.|)$/) {
|
|
next; # skip "." and ".."
|
|
}
|
|
if($log =~ /^\.nfs/) {
|
|
next; # skip ".nfs"
|
|
}
|
|
if(($log eq "memdump") || ($log eq "core")) {
|
|
next; # skip "memdump" and "core"
|
|
}
|
|
if((-d "$LOGDIR/$log") || (! -s "$LOGDIR/$log")) {
|
|
next; # skip directory and empty files
|
|
}
|
|
if(($log =~ /^stdout\d+/) && ($log !~ /^stdout$testnum/)) {
|
|
next; # skip stdoutNnn of other tests
|
|
}
|
|
if(($log =~ /^stderr\d+/) && ($log !~ /^stderr$testnum/)) {
|
|
next; # skip stderrNnn of other tests
|
|
}
|
|
if(($log =~ /^upload\d+/) && ($log !~ /^upload$testnum/)) {
|
|
next; # skip uploadNnn of other tests
|
|
}
|
|
if(($log =~ /^curl\d+\.out/) && ($log !~ /^curl$testnum\.out/)) {
|
|
next; # skip curlNnn.out of other tests
|
|
}
|
|
if(($log =~ /^test\d+\.txt/) && ($log !~ /^test$testnum\.txt/)) {
|
|
next; # skip testNnn.txt of other tests
|
|
}
|
|
if(($log =~ /^file\d+\.txt/) && ($log !~ /^file$testnum\.txt/)) {
|
|
next; # skip fileNnn.txt of other tests
|
|
}
|
|
if(($log =~ /^valgrind\d+/) && ($log !~ /^valgrind$testnum(\..*|)$/)) {
|
|
next; # skip valgrindNnn of other tests
|
|
}
|
|
logmsg "=== Start of file $log\n";
|
|
displaylogcontent("$LOGDIR/$log");
|
|
logmsg "=== End of file $log\n";
|
|
}
|
|
}
|
|
|
|
#######################################################################
|
|
# The main test-loop
|
|
#
|
|
|
|
my $failed;
|
|
my $testnum;
|
|
my $ok=0;
|
|
my $total=0;
|
|
my $lasttest=0;
|
|
my @at = split(" ", $TESTCASES);
|
|
my $count=0;
|
|
|
|
$start = time();
|
|
|
|
foreach $testnum (@at) {
|
|
|
|
$lasttest = $testnum if($testnum > $lasttest);
|
|
$count++;
|
|
|
|
my $error = singletest($testnum, $count, scalar(@at));
|
|
if($error < 0) {
|
|
# not a test we can run
|
|
next;
|
|
}
|
|
|
|
$total++; # number of tests we've run
|
|
|
|
if($error>0) {
|
|
$failed.= "$testnum ";
|
|
if($postmortem) {
|
|
# display all files in log/ in a nice way
|
|
displaylogs($testnum);
|
|
}
|
|
if(!$anyway) {
|
|
# a test failed, abort
|
|
logmsg "\n - abort tests\n";
|
|
last;
|
|
}
|
|
}
|
|
elsif(!$error) {
|
|
$ok++; # successful test counter
|
|
}
|
|
|
|
# loop for next test
|
|
}
|
|
|
|
my $sofar = time() - $start;
|
|
|
|
#######################################################################
|
|
# Close command log
|
|
#
|
|
close(CMDLOG);
|
|
|
|
# Tests done, stop the servers
|
|
stopservers($verbose);
|
|
|
|
my $all = $total + $skipped;
|
|
|
|
runtimestats($lasttest);
|
|
|
|
if($total) {
|
|
logmsg sprintf("TESTDONE: $ok tests out of $total reported OK: %d%%\n",
|
|
$ok/$total*100);
|
|
|
|
if($ok != $total) {
|
|
logmsg "TESTFAIL: These test cases failed: $failed\n";
|
|
}
|
|
}
|
|
else {
|
|
logmsg "TESTFAIL: No tests were performed\n";
|
|
}
|
|
|
|
if($all) {
|
|
logmsg "TESTDONE: $all tests were considered during ".
|
|
sprintf("%.0f", $sofar) ." seconds.\n";
|
|
}
|
|
|
|
if($skipped) {
|
|
my $s=0;
|
|
logmsg "TESTINFO: $skipped tests were skipped due to these restraints:\n";
|
|
|
|
for(keys %skipped) {
|
|
my $r = $_;
|
|
printf "TESTINFO: \"%s\" %d times (", $r, $skipped{$_};
|
|
|
|
# now show all test case numbers that had this reason for being
|
|
# skipped
|
|
my $c=0;
|
|
for(0 .. scalar @teststat) {
|
|
my $t = $_;
|
|
if($teststat[$_] && ($teststat[$_] eq $r)) {
|
|
logmsg ", " if($c);
|
|
logmsg $_;
|
|
$c++;
|
|
}
|
|
}
|
|
logmsg ")\n";
|
|
}
|
|
}
|
|
|
|
if($total && ($ok != $total)) {
|
|
exit 1;
|
|
}
|