#!/usr/bin/env perl #*************************************************************************** # _ _ ____ _ # Project ___| | | | _ \| | # / __| | | | |_) | | # | (__| |_| | _ <| |___ # \___|\___/|_| \_\_____| # # Copyright (C) 1998 - 2008, Daniel Stenberg, , et al. # # This software is licensed as described in the file COPYING, which # you should have received as part of this distribution. The terms # are also available at http://curl.haxx.se/docs/copyright.html. # # You may opt to use, copy, modify, merge, publish, distribute and/or sell # copies of the Software, and permit persons to whom the Software is # furnished to do so, under the terms of the COPYING file. # # This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY # KIND, either express or implied. # # $Id$ #*************************************************************************** # Starts sshd for use in the SCP, SFTP and SOCKS curl test harness tests. # Also creates the ssh configuration files needed for these tests. # Options: # # -v # -d # -u user # -l listen address # -p SCP/SFTP server port # -s SOCKS4/5 server port use strict; #use warnings; use Cwd; #*************************************************************************** # Variables and subs imported from sshhelp module # use sshhelp qw( $sshdexe $sshexe $sftpexe $sshkeygenexe $sshdconfig $sshconfig $knownhosts $sshdlog $sshlog $hstprvkeyf $hstpubkeyf $cliprvkeyf $clipubkeyf display_sshdconfig display_sshconfig display_sshdlog display_sshlog dump_array find_sshd find_ssh find_sftp find_sshkeygen logmsg sshversioninfo ); #*************************************************************************** my $verbose = 0; # set to 1 for debugging my $debugprotocol = 0; # set to 1 for protocol debugging my $port = 8999; # our default SCP/SFTP server port my $socksport = $port + 1; # our default SOCKS4/5 server port my $listenaddr = '127.0.0.1'; # default address on which to listen my $path = getcwd(); # current working directory my $username = $ENV{USER}; # default user my $error; my @cfgarr; #*************************************************************************** # Parse command line options # while(@ARGV) { if($ARGV[0] eq '-v') { $verbose = 1; } elsif($ARGV[0] eq '-d') { $verbose = 1; $debugprotocol = 1; } elsif($ARGV[0] eq '-u') { $username = $ARGV[1]; shift @ARGV; } elsif($ARGV[0] eq '-l') { $listenaddr = $ARGV[1]; shift @ARGV; } elsif($ARGV[0] eq '-p') { if($ARGV[1] =~ /^(\d+)$/) { $port = $1; } shift @ARGV; } elsif($ARGV[0] eq '-s') { if($ARGV[1] =~ /^(\d+)$/) { $socksport = $1; } shift @ARGV; } shift @ARGV; }; #*************************************************************************** # Logging level for ssh server and client # my $loglevel = $debugprotocol?'DEBUG3':'DEBUG2'; #*************************************************************************** # Validate username # if(!$username) { $error = 'Will not run ssh server without a user name'; } elsif($username eq 'root') { $error = 'Will not run ssh server as root to mitigate security risks'; } if($error) { logmsg $error; exit 1; } #*************************************************************************** # Find out ssh daemon canonical file name # my $sshd = find_sshd(); if(!$sshd) { logmsg "cannot find $sshdexe"; exit 1; } #*************************************************************************** # Find out ssh daemon version info # my ($sshdid, $sshdvernum, $sshdverstr, $sshderror) = sshversioninfo($sshd); if(!$sshdid) { # Not an OpenSSH or SunSSH ssh daemon logmsg $sshderror if($verbose); logmsg 'SCP, SFTP and SOCKS tests require OpenSSH 2.9.9 or later'; exit 1; } logmsg "ssh server found $sshd is $sshdverstr" if($verbose); #*************************************************************************** # ssh daemon command line options we might use and version support # # -e: log stderr : OpenSSH 2.9.0 and later # -f: sshd config file : OpenSSH 1.2.1 and later # -D: no daemon forking : OpenSSH 2.5.0 and later # -o: command-line option : OpenSSH 3.1.0 and later # -t: test config file : OpenSSH 2.9.9 and later # -?: sshd version info : OpenSSH 1.2.1 and later # # -e: log stderr : SunSSH 1.0.0 and later # -f: sshd config file : SunSSH 1.0.0 and later # -D: no daemon forking : SunSSH 1.0.0 and later # -o: command-line option : SunSSH 1.0.0 and later # -t: test config file : SunSSH 1.0.0 and later # -?: sshd version info : SunSSH 1.0.0 and later #*************************************************************************** # Verify minimum ssh daemon version # if((($sshdid =~ /OpenSSH/) && ($sshdvernum < 299)) || (($sshdid =~ /SunSSH/) && ($sshdvernum < 100))) { logmsg 'SCP, SFTP and SOCKS tests require OpenSSH 2.9.9 or later'; exit 1; } #*************************************************************************** # Find out sftp server plugin canonical file name # my $sftp = find_sftp(); if(!$sftp) { logmsg "cannot find $sftpexe"; exit 1; } logmsg "sftp server plugin found $sftp" if($verbose); #*************************************************************************** # Find out ssh keygen canonical file name # my $sshkeygen = find_sshkeygen(); if(!$sshkeygen) { logmsg "cannot find $sshkeygenexe"; exit 1; } logmsg "ssh keygen found $sshkeygen" if($verbose); #*************************************************************************** # Find out ssh client canonical file name # my $ssh = find_ssh(); if(!$ssh) { logmsg "cannot find $sshexe"; exit 1; } #*************************************************************************** # Find out ssh client version info # my ($sshid, $sshvernum, $sshverstr, $ssherror) = sshversioninfo($ssh); if(!$sshid) { # Not an OpenSSH or SunSSH ssh client logmsg $ssherror if($verbose); logmsg 'SCP, SFTP and SOCKS tests require OpenSSH 2.9.9 or later'; exit 1; } logmsg "ssh client found $ssh is $sshverstr" if($verbose); #*************************************************************************** # ssh client command line options we might use and version support # # -D: dynamic app port forwarding : OpenSSH 2.9.9 and later # -F: ssh config file : OpenSSH 2.9.9 and later # -N: no shell/command : OpenSSH 2.1.0 and later # -p: connection port : OpenSSH 1.2.1 and later # -v: verbose messages : OpenSSH 1.2.1 and later # -vv: increase verbosity : OpenSSH 2.3.0 and later # -V: ssh version info : OpenSSH 1.2.1 and later # # -D: dynamic app port forwarding : SunSSH 1.0.0 and later # -F: ssh config file : SunSSH 1.0.0 and later # -N: no shell/command : SunSSH 1.0.0 and later # -p: connection port : SunSSH 1.0.0 and later # -v: verbose messages : SunSSH 1.0.0 and later # -vv: increase verbosity : SunSSH 1.0.0 and later # -V: ssh version info : SunSSH 1.0.0 and later #*************************************************************************** # Verify minimum ssh client version # if((($sshid =~ /OpenSSH/) && ($sshvernum < 299)) || (($sshid =~ /SunSSH/) && ($sshvernum < 100))) { logmsg 'SCP, SFTP and SOCKS tests require OpenSSH 2.9.9 or later'; exit 1; } #*************************************************************************** # ssh keygen command line options we actually use and version support # # -C: identity comment : OpenSSH 1.2.1 and later # -f: key filename : OpenSSH 1.2.1 and later # -N: new passphrase : OpenSSH 1.2.1 and later # -q: quiet keygen : OpenSSH 1.2.1 and later # -t: key type : OpenSSH 2.5.0 and later # # -C: identity comment : SunSSH 1.0.0 and later # -f: key filename : SunSSH 1.0.0 and later # -N: new passphrase : SunSSH 1.0.0 and later # -q: quiet keygen : SunSSH 1.0.0 and later # -t: key type : SunSSH 1.0.0 and later #*************************************************************************** # Generate host and client key files for curl's tests # if((! -e $hstprvkeyf) || (! -e $hstpubkeyf) || (! -e $cliprvkeyf) || (! -e $clipubkeyf)) { # Make sure all files are gone so ssh-keygen doesn't complain unlink($hstprvkeyf, $hstpubkeyf, $cliprvkeyf, $clipubkeyf); logmsg 'generating host keys...' if($verbose); if(system "$sshkeygen -q -t dsa -f $hstprvkeyf -C 'curl test server' -N ''") { logmsg 'Could not generate host key'; exit 1; } logmsg 'generating client keys...' if($verbose); if(system "$sshkeygen -q -t dsa -f $cliprvkeyf -C 'curl test client' -N ''") { logmsg 'Could not generate client key'; exit 1; } } #*************************************************************************** # ssh daemon configuration file options we might use and version support # # AFSTokenPassing : OpenSSH 1.2.1 and later [1] # AcceptEnv : OpenSSH 3.9.0 and later # AddressFamily : OpenSSH 4.0.0 and later # AllowGroups : OpenSSH 1.2.1 and later # AllowTcpForwarding : OpenSSH 2.3.0 and later # AllowUsers : OpenSSH 1.2.1 and later # AuthorizedKeysFile : OpenSSH 2.9.9 and later # AuthorizedKeysFile2 : OpenSSH 2.9.9 and later # Banner : OpenSSH 2.5.0 and later # ChallengeResponseAuthentication : OpenSSH 2.5.0 and later # Ciphers : OpenSSH 2.1.0 and later [3] # ClientAliveCountMax : OpenSSH 2.9.0 and later # ClientAliveInterval : OpenSSH 2.9.0 and later # Compression : OpenSSH 3.3.0 and later # DenyGroups : OpenSSH 1.2.1 and later # DenyUsers : OpenSSH 1.2.1 and later # ForceCommand : OpenSSH 4.4.0 and later [3] # GatewayPorts : OpenSSH 2.1.0 and later # GSSAPIAuthentication : OpenSSH 3.7.0 and later [1] # GSSAPICleanupCredentials : OpenSSH 3.8.0 and later [1] # HostbasedAuthentication : OpenSSH 2.9.0 and later # HostbasedUsesNameFromPacketOnly : OpenSSH 2.9.0 and later # HostKey : OpenSSH 1.2.1 and later # IgnoreRhosts : OpenSSH 1.2.1 and later # IgnoreUserKnownHosts : OpenSSH 1.2.1 and later # KbdInteractiveAuthentication : OpenSSH 2.3.0 and later # KeepAlive : OpenSSH 1.2.1 and later # KerberosAuthentication : OpenSSH 1.2.1 and later [1] # KerberosGetAFSToken : OpenSSH 3.8.0 and later [1] # KerberosOrLocalPasswd : OpenSSH 1.2.1 and later [1] # KerberosTgtPassing : OpenSSH 1.2.1 and later [1] # KerberosTicketCleanup : OpenSSH 1.2.1 and later [1] # KeyRegenerationInterval : OpenSSH 1.2.1 and later # ListenAddress : OpenSSH 1.2.1 and later # LoginGraceTime : OpenSSH 1.2.1 and later # LogLevel : OpenSSH 1.2.1 and later # LookupClientHostnames : SunSSH 1.0.0 and later # MACs : OpenSSH 2.5.0 and later [3] # Match : OpenSSH 4.4.0 and later [3] # MaxAuthTries : OpenSSH 3.9.0 and later # MaxStartups : OpenSSH 2.2.0 and later # PAMAuthenticationViaKbdInt : OpenSSH 2.9.0 and later [2] # PasswordAuthentication : OpenSSH 1.2.1 and later # PermitEmptyPasswords : OpenSSH 1.2.1 and later # PermitOpen : OpenSSH 4.4.0 and later [3] # PermitRootLogin : OpenSSH 1.2.1 and later # PermitTunnel : OpenSSH 4.3.0 and later # PermitUserEnvironment : OpenSSH 3.5.0 and later # PidFile : OpenSSH 2.1.0 and later # Port : OpenSSH 1.2.1 and later # PrintLastLog : OpenSSH 2.9.0 and later # PrintMotd : OpenSSH 1.2.1 and later # Protocol : OpenSSH 2.1.0 and later # PubkeyAuthentication : OpenSSH 2.5.0 and later # RhostsAuthentication : OpenSSH 1.2.1 and later # RhostsRSAAuthentication : OpenSSH 1.2.1 and later # RSAAuthentication : OpenSSH 1.2.1 and later # ServerKeyBits : OpenSSH 1.2.1 and later # SkeyAuthentication : OpenSSH 1.2.1 and later [1] # StrictModes : OpenSSH 1.2.1 and later # Subsystem : OpenSSH 2.2.0 and later # SyslogFacility : OpenSSH 1.2.1 and later # TCPKeepAlive : OpenSSH 3.8.0 and later # UseDNS : OpenSSH 3.7.0 and later # UseLogin : OpenSSH 1.2.1 and later # UsePAM : OpenSSH 3.7.0 and later [1][2] # UsePrivilegeSeparation : OpenSSH 3.2.2 and later # VerifyReverseMapping : OpenSSH 3.1.0 and later # X11DisplayOffset : OpenSSH 1.2.1 and later [3] # X11Forwarding : OpenSSH 1.2.1 and later # X11UseLocalhost : OpenSSH 3.1.0 and later # XAuthLocation : OpenSSH 2.1.1 and later [3] # # [1] Option only available if activated at compile time # [2] Option specific for portable versions # [3] Option not used in our ssh server config file #*************************************************************************** # Initialize sshd config with options actually supported in OpenSSH 2.9.9 # logmsg 'generating ssh server config file...' if($verbose); @cfgarr = (); push @cfgarr, '# This is a generated file. Do not edit.'; push @cfgarr, "# $sshdverstr sshd configuration file for curl testing"; push @cfgarr, '#'; push @cfgarr, "DenyUsers !$username"; push @cfgarr, "AllowUsers $username"; push @cfgarr, 'DenyGroups'; push @cfgarr, 'AllowGroups'; push @cfgarr, '#'; push @cfgarr, "AuthorizedKeysFile $path/$clipubkeyf"; push @cfgarr, "AuthorizedKeysFile2 $path/$clipubkeyf"; push @cfgarr, "HostKey $path/$hstprvkeyf"; push @cfgarr, "PidFile $path/.ssh.pid"; push @cfgarr, '#'; push @cfgarr, "Port $port"; push @cfgarr, "ListenAddress $listenaddr"; push @cfgarr, 'Protocol 2'; push @cfgarr, '#'; push @cfgarr, 'AllowTcpForwarding yes'; push @cfgarr, 'Banner none'; push @cfgarr, 'ChallengeResponseAuthentication no'; push @cfgarr, 'ClientAliveCountMax 3'; push @cfgarr, 'ClientAliveInterval 0'; push @cfgarr, 'GatewayPorts no'; push @cfgarr, 'HostbasedAuthentication no'; push @cfgarr, 'HostbasedUsesNameFromPacketOnly no'; push @cfgarr, 'IgnoreRhosts yes'; push @cfgarr, 'IgnoreUserKnownHosts yes'; push @cfgarr, 'KeyRegenerationInterval 0'; push @cfgarr, 'LoginGraceTime 30'; push @cfgarr, "LogLevel $loglevel"; push @cfgarr, 'MaxStartups 5'; push @cfgarr, 'PasswordAuthentication no'; push @cfgarr, 'PermitEmptyPasswords no'; push @cfgarr, 'PermitRootLogin no'; push @cfgarr, 'PrintLastLog no'; push @cfgarr, 'PrintMotd no'; push @cfgarr, 'PubkeyAuthentication yes'; push @cfgarr, 'RhostsRSAAuthentication no'; push @cfgarr, 'RSAAuthentication no'; push @cfgarr, 'ServerKeyBits 768'; push @cfgarr, 'StrictModes no'; push @cfgarr, "Subsystem sftp $sftp"; push @cfgarr, 'SyslogFacility AUTH'; push @cfgarr, 'UseLogin no'; push @cfgarr, 'X11Forwarding no'; push @cfgarr, '#'; #*************************************************************************** # Write out initial sshd configuration file for curl's tests # $error = dump_array($sshdconfig, @cfgarr); if($error) { logmsg $error; exit 1; } #*************************************************************************** # Verifies at run time if sshd supports a given configuration file option # sub sshd_supports_opt { my ($option, $value) = @_; my $err; # if((($sshdid =~ /OpenSSH/) && ($sshdvernum >= 310)) || ($sshdid =~ /SunSSH/)) { # ssh daemon supports command line options -t -f and -o $err = grep /((Unsupported)|(Bad configuration)|(Deprecated)) option.*$option/, qx($sshd -t -f $sshdconfig -o $option=$value 2>&1); return !$err; } if(($sshdid =~ /OpenSSH/) && ($sshdvernum >= 299)) { # ssh daemon supports command line options -t and -f $err = dump_array($sshdconfig, (@cfgarr, "$option $value")); if($err) { logmsg $err; return 0; } $err = grep /((Unsupported)|(Bad configuration)|(Deprecated)) option.*$option/, qx($sshd -t -f $sshdconfig 2>&1); unlink $sshdconfig; return !$err; } return 0; } #*************************************************************************** # Kerberos Authentication support may have not been built into sshd # if(sshd_supports_opt('KerberosAuthentication','no')) { push @cfgarr, 'KerberosAuthentication no'; } if(sshd_supports_opt('KerberosGetAFSToken','no')) { push @cfgarr, 'KerberosGetAFSToken no'; } if(sshd_supports_opt('KerberosOrLocalPasswd','no')) { push @cfgarr, 'KerberosOrLocalPasswd no'; } if(sshd_supports_opt('KerberosTgtPassing','no')) { push @cfgarr, 'KerberosTgtPassing no'; } if(sshd_supports_opt('KerberosTicketCleanup','yes')) { push @cfgarr, 'KerberosTicketCleanup yes'; } #*************************************************************************** # Andrew File System support may have not been built into sshd # if(sshd_supports_opt('AFSTokenPassing','no')) { push @cfgarr, 'AFSTokenPassing no'; } #*************************************************************************** # S/Key authentication support may have not been built into sshd # if(sshd_supports_opt('SkeyAuthentication','no')) { push @cfgarr, 'SkeyAuthentication no'; } #*************************************************************************** # GSSAPI Authentication support may have not been built into sshd # my $sshd_builtwith_GSSAPI; if(sshd_supports_opt('GSSAPIAuthentication','no')) { push @cfgarr, 'GSSAPIAuthentication no'; $sshd_builtwith_GSSAPI = 1; } if(sshd_supports_opt('GSSAPICleanupCredentials','yes')) { push @cfgarr, 'GSSAPICleanupCredentials yes'; } push @cfgarr, '#'; #*************************************************************************** # Options that might be supported or not in sshd OpenSSH 2.9.9 and later # if(sshd_supports_opt('AcceptEnv','')) { push @cfgarr, 'AcceptEnv'; } if(sshd_supports_opt('AddressFamily','any')) { # Address family must be specified before ListenAddress splice @cfgarr, 14, 0, 'AddressFamily any'; } if(sshd_supports_opt('Compression','no')) { push @cfgarr, 'Compression no'; } if(sshd_supports_opt('KbdInteractiveAuthentication','no')) { push @cfgarr, 'KbdInteractiveAuthentication no'; } if(sshd_supports_opt('KeepAlive','no')) { push @cfgarr, 'KeepAlive no'; } if(sshd_supports_opt('LookupClientHostnames','no')) { push @cfgarr, 'LookupClientHostnames no'; } if(sshd_supports_opt('MaxAuthTries','10')) { push @cfgarr, 'MaxAuthTries 10'; } if(sshd_supports_opt('PAMAuthenticationViaKbdInt','no')) { push @cfgarr, 'PAMAuthenticationViaKbdInt no'; } if(sshd_supports_opt('PermitTunnel','no')) { push @cfgarr, 'PermitTunnel no'; } if(sshd_supports_opt('PermitUserEnvironment','no')) { push @cfgarr, 'PermitUserEnvironment no'; } if(sshd_supports_opt('RhostsAuthentication','no')) { push @cfgarr, 'RhostsAuthentication no'; } if(sshd_supports_opt('TCPKeepAlive','no')) { push @cfgarr, 'TCPKeepAlive no'; } if(sshd_supports_opt('UseDNS','no')) { push @cfgarr, 'UseDNS no'; } if(sshd_supports_opt('UsePAM','no')) { push @cfgarr, 'UsePAM no'; } if(sshd_supports_opt('UsePrivilegeSeparation','no')) { push @cfgarr, 'UsePrivilegeSeparation no'; } if(sshd_supports_opt('VerifyReverseMapping','no')) { push @cfgarr, 'VerifyReverseMapping no'; } if(sshd_supports_opt('X11UseLocalhost','yes')) { push @cfgarr, 'X11UseLocalhost yes'; } push @cfgarr, '#'; #*************************************************************************** # Write out resulting sshd configuration file for curl's tests # $error = dump_array($sshdconfig, @cfgarr); if($error) { logmsg $error; exit 1; } #*************************************************************************** # Verify that sshd actually supports our generated configuration file # if(system "$sshd -t -f $sshdconfig > $sshdlog 2>&1") { logmsg "sshd configuration file $sshdconfig failed verification"; display_sshdlog(); display_sshdconfig(); exit 1; } #*************************************************************************** # Generate ssh client host key database file for curl's tests # if(! -e $knownhosts) { logmsg 'generating ssh client known hosts file...' if($verbose); if(open(DSAKEYFILE, "<$hstpubkeyf")) { my @dsahostkey = do { local $/ = ' '; }; if(close(DSAKEYFILE)) { if(open(KNOWNHOSTS, ">$knownhosts")) { print KNOWNHOSTS "$listenaddr ssh-dss $dsahostkey[1]\n"; if(!close(KNOWNHOSTS)) { $error = "Error: cannot close file $knownhosts"; } } else { $error = "Error: cannot write file $knownhosts"; } } else { $error = "Error: cannot close file $hstpubkeyf"; } } else { $error = "Error: cannot read file $hstpubkeyf"; } if($error) { logmsg $error; exit 1; } } #*************************************************************************** # ssh client configuration file options we might use and version support # # AddressFamily : OpenSSH 3.7.0 and later # BatchMode : OpenSSH 1.2.1 and later # BindAddress : OpenSSH 2.9.9 and later # ChallengeResponseAuthentication : OpenSSH 2.5.0 and later # CheckHostIP : OpenSSH 1.2.1 and later # Cipher : OpenSSH 1.2.1 and later [3] # Ciphers : OpenSSH 2.1.0 and later [3] # ClearAllForwardings : OpenSSH 2.9.9 and later # Compression : OpenSSH 1.2.1 and later # CompressionLevel : OpenSSH 1.2.1 and later [3] # ConnectionAttempts : OpenSSH 1.2.1 and later # ConnectTimeout : OpenSSH 3.7.0 and later # ControlMaster : OpenSSH 3.9.0 and later # ControlPath : OpenSSH 3.9.0 and later # DynamicForward : OpenSSH 2.9.0 and later # EnableSSHKeysign : OpenSSH 3.6.0 and later # EscapeChar : OpenSSH 1.2.1 and later [3] # ExitOnForwardFailure : OpenSSH 4.4.0 and later # ForwardAgent : OpenSSH 1.2.1 and later # ForwardX11 : OpenSSH 1.2.1 and later # ForwardX11Trusted : OpenSSH 3.8.0 and later # GatewayPorts : OpenSSH 1.2.1 and later # GlobalKnownHostsFile : OpenSSH 1.2.1 and later # GSSAPIAuthentication : OpenSSH 3.7.0 and later [1] # GSSAPIDelegateCredentials : OpenSSH 3.7.0 and later [1] # HashKnownHosts : OpenSSH 4.0.0 and later # Host : OpenSSH 1.2.1 and later # HostbasedAuthentication : OpenSSH 2.9.0 and later # HostKeyAlgorithms : OpenSSH 2.9.0 and later [3] # HostKeyAlias : OpenSSH 2.5.0 and later [3] # HostName : OpenSSH 1.2.1 and later # IdentitiesOnly : OpenSSH 3.9.0 and later # IdentityFile : OpenSSH 1.2.1 and later # KeepAlive : OpenSSH 1.2.1 and later # KbdInteractiveAuthentication : OpenSSH 2.3.0 and later # KbdInteractiveDevices : OpenSSH 2.3.0 and later [3] # LocalCommand : OpenSSH 4.3.0 and later [3] # LocalForward : OpenSSH 1.2.1 and later [3] # LogLevel : OpenSSH 1.2.1 and later # MACs : OpenSSH 2.5.0 and later [3] # NoHostAuthenticationForLocalhost : OpenSSH 3.0.0 and later # NumberOfPasswordPrompts : OpenSSH 1.2.1 and later # PasswordAuthentication : OpenSSH 1.2.1 and later # PermitLocalCommand : OpenSSH 4.3.0 and later # Port : OpenSSH 1.2.1 and later # PreferredAuthentications : OpenSSH 2.5.2 and later # Protocol : OpenSSH 2.1.0 and later # ProxyCommand : OpenSSH 1.2.1 and later [3] # PubkeyAuthentication : OpenSSH 2.5.0 and later # RekeyLimit : OpenSSH 3.7.0 and later # RemoteForward : OpenSSH 1.2.1 and later [3] # RhostsRSAAuthentication : OpenSSH 1.2.1 and later # RSAAuthentication : OpenSSH 1.2.1 and later # SendEnv : OpenSSH 3.9.0 and later # ServerAliveCountMax : OpenSSH 3.8.0 and later # ServerAliveInterval : OpenSSH 3.8.0 and later # SmartcardDevice : OpenSSH 2.9.9 and later [1][3] # StrictHostKeyChecking : OpenSSH 1.2.1 and later # TCPKeepAlive : OpenSSH 3.8.0 and later # Tunnel : OpenSSH 4.3.0 and later # TunnelDevice : OpenSSH 4.3.0 and later [3] # UsePAM : OpenSSH 3.7.0 and later [1][2][3] # UsePrivilegedPort : OpenSSH 1.2.1 and later # User : OpenSSH 1.2.1 and later # UserKnownHostsFile : OpenSSH 1.2.1 and later # VerifyHostKeyDNS : OpenSSH 3.8.0 and later # XAuthLocation : OpenSSH 2.1.1 and later [3] # # [1] Option only available if activated at compile time # [2] Option specific for portable versions # [3] Option not used in our ssh client config file #*************************************************************************** # Initialize ssh config with options actually supported in OpenSSH 2.9.9 # logmsg 'generating ssh client config file...' if($verbose); @cfgarr = (); push @cfgarr, '# This is a generated file. Do not edit.'; push @cfgarr, "# $sshverstr ssh client configuration file for curl testing"; push @cfgarr, '#'; push @cfgarr, 'Host *'; push @cfgarr, '#'; push @cfgarr, "Port $port"; push @cfgarr, "HostName $listenaddr"; push @cfgarr, "User $username"; push @cfgarr, 'Protocol 2'; push @cfgarr, '#'; push @cfgarr, "BindAddress $listenaddr"; push @cfgarr, "DynamicForward $socksport"; push @cfgarr, '#'; push @cfgarr, "IdentityFile $path/curl_client_key"; push @cfgarr, "UserKnownHostsFile $path/$knownhosts"; push @cfgarr, '#'; push @cfgarr, 'BatchMode yes'; push @cfgarr, 'ChallengeResponseAuthentication no'; push @cfgarr, 'CheckHostIP no'; push @cfgarr, 'ClearAllForwardings no'; push @cfgarr, 'Compression no'; push @cfgarr, 'ConnectionAttempts 3'; push @cfgarr, 'ForwardAgent no'; push @cfgarr, 'ForwardX11 no'; push @cfgarr, 'GatewayPorts no'; push @cfgarr, 'GlobalKnownHostsFile /dev/null'; push @cfgarr, 'HostbasedAuthentication no'; push @cfgarr, 'KbdInteractiveAuthentication no'; push @cfgarr, "LogLevel $loglevel"; push @cfgarr, 'NumberOfPasswordPrompts 0'; push @cfgarr, 'PasswordAuthentication no'; push @cfgarr, 'PreferredAuthentications publickey'; push @cfgarr, 'PubkeyAuthentication yes'; push @cfgarr, 'RhostsRSAAuthentication no'; push @cfgarr, 'RSAAuthentication no'; push @cfgarr, 'StrictHostKeyChecking yes'; push @cfgarr, 'UsePrivilegedPort no'; push @cfgarr, '#'; #*************************************************************************** # Options supported in ssh client newer than OpenSSH 2.9.9 # if(($sshid =~ /OpenSSH/) && ($sshvernum >= 370)) { push @cfgarr, 'AddressFamily any'; } if((($sshid =~ /OpenSSH/) && ($sshvernum >= 370)) || (($sshid =~ /SunSSH/) && ($sshvernum >= 120))) { push @cfgarr, 'ConnectTimeout 30'; } if(($sshid =~ /OpenSSH/) && ($sshvernum >= 390)) { push @cfgarr, 'ControlMaster no'; } if(($sshid =~ /OpenSSH/) && ($sshvernum >= 420)) { push @cfgarr, 'ControlPath none'; } if(($sshid =~ /OpenSSH/) && ($sshvernum >= 360)) { push @cfgarr, 'EnableSSHKeysign no'; } if(($sshid =~ /OpenSSH/) && ($sshvernum >= 440)) { push @cfgarr, 'ExitOnForwardFailure yes'; } if((($sshid =~ /OpenSSH/) && ($sshvernum >= 380)) || (($sshid =~ /SunSSH/) && ($sshvernum >= 120))) { push @cfgarr, 'ForwardX11Trusted no'; } if(($sshd_builtwith_GSSAPI) && ($sshdid eq $sshid) && ($sshdvernum == $sshvernum)) { push @cfgarr, 'GSSAPIAuthentication no'; push @cfgarr, 'GSSAPIDelegateCredentials no'; if($sshid =~ /SunSSH/) { push @cfgarr, 'GSSAPIKeyExchange no'; } } if((($sshid =~ /OpenSSH/) && ($sshvernum >= 400)) || (($sshid =~ /SunSSH/) && ($sshvernum >= 120))) { push @cfgarr, 'HashKnownHosts no'; } if(($sshid =~ /OpenSSH/) && ($sshvernum >= 390)) { push @cfgarr, 'IdentitiesOnly yes'; } if((($sshid =~ /OpenSSH/) && ($sshvernum < 380)) || ($sshid =~ /SunSSH/)) { push @cfgarr, 'KeepAlive no'; } if((($sshid =~ /OpenSSH/) && ($sshvernum >= 300)) || ($sshid =~ /SunSSH/)) { push @cfgarr, 'NoHostAuthenticationForLocalhost no'; } if(($sshid =~ /OpenSSH/) && ($sshvernum >= 430)) { push @cfgarr, 'PermitLocalCommand no'; } if((($sshid =~ /OpenSSH/) && ($sshvernum >= 370)) || (($sshid =~ /SunSSH/) && ($sshvernum >= 120))) { push @cfgarr, 'RekeyLimit 1G'; } if(($sshid =~ /OpenSSH/) && ($sshvernum >= 390)) { push @cfgarr, 'SendEnv'; } if((($sshid =~ /OpenSSH/) && ($sshvernum >= 380)) || (($sshid =~ /SunSSH/) && ($sshvernum >= 120))) { push @cfgarr, 'ServerAliveCountMax 3'; push @cfgarr, 'ServerAliveInterval 0'; } if(($sshid =~ /OpenSSH/) && ($sshvernum >= 380)) { push @cfgarr, 'TCPKeepAlive no'; } if(($sshid =~ /OpenSSH/) && ($sshvernum >= 430)) { push @cfgarr, 'Tunnel no'; } if(($sshid =~ /OpenSSH/) && ($sshvernum >= 380)) { push @cfgarr, 'VerifyHostKeyDNS no'; } push @cfgarr, '#'; #*************************************************************************** # Write out resulting ssh client configuration file for curl's tests # $error = dump_array($sshconfig, @cfgarr); if($error) { logmsg $error; exit 1; } @cfgarr = (); #*************************************************************************** # Start the ssh server daemon without forking it # my $rc = system "$sshd -e -D -f $sshdconfig > $sshdlog 2>&1"; if($rc == -1) { logmsg "$sshd failed with: $!"; } elsif($rc & 127) { logmsg sprintf("$sshd died with signal %d, and %s coredump", ($rc & 127), ($rc & 128)?'a':'no'); } elsif($verbose && ($rc >> 8)) { logmsg sprintf("$sshd exited with %d", $rc >> 8); } #*************************************************************************** # Clean up once the server has stopped # unlink($hstprvkeyf, $hstpubkeyf, $cliprvkeyf, $clipubkeyf, $knownhosts); unlink($sshdconfig, $sshconfig); exit 0;