If an empty string is passed to CURLOPT_SSH_PUBLIC_KEYFILE, libcurl will
pass no public key to libssh2 which then tries to compute it from the
private key. This is known to work when libssh2 1.4.0+ is linked against
OpenSSL.
This change replaces RFC 2818 based hostname check in OpenSSL build with
RFC 6125 [1] based one.
The hostname check in RFC 2818 is ambiguous and each project implements
it in the their own way and they are slightly different. I check curl,
gnutls, Firefox and Chrome and they are all different.
I don't think there is a bug in current implementation of hostname
check. But it is not as strict as the modern browsers do. Currently,
curl allows multiple wildcard character '*' and it matches '.'. (as
described in the comment in ssluse.c).
Firefox implementation is also based on RFC 2818 but it only allows at
most one wildcard character and it must be in the left-most label in the
pattern and the wildcard must not be followed by any character in the
label.[2] Chromium implementation is based on RFC 6125 as my patch does.
Firefox and Chromium both require wildcard in the left-most label in the
presented identifier.
This patch is more strict than the current implementation, so there may
be some cases where old curl works but new one does not. But at the same
time I think it is good practice to follow the modern browsers do and
follow the newer RFC.
[1] http://tools.ietf.org/html/rfc6125#section-6.4.3
[2] https://bugzilla.mozilla.org/show_bug.cgi?id=159483
With FOLLOWLOCATION enabled. When a 3xx page is downloaded and the
download size was known (like with a Content-Length header), but the
subsequent URL (transfered after the 3xx page) was chunked encoded, then
the previous "known download size" would linger and cause the progress
meter to get incorrect information, ie the former value would remain
being sent in. This could easily result in downloads that were WAY
larger than "expected" and would cause >100% outputs with the curl
command line tool.
Test case 599 was created and it was used to repeat the bug and then
verify the fix.
Bug: http://curl.haxx.se/bug/view.cgi?id=3510057
Reported by: Michael Wallner
It is now possible to calculate the md5 sum as the stream of buffers
becomes known where as previously it was only possible to calculate the
md5 sum of a pre-prepared buffer.
This feature allows the user to specify and use additional POP3
commands such as UIDL and DELE via libcurl's CURLOPT_CUSTOMREQUEST or
curl's -X command line option.
Simplified the code to remove the need for a separate "LIST <msg id>"
command handler and state machine and instead use the LIST command
handler for both operations.
Moved the server greeting response handling code from the statemach_act
functions to separate response functions. This makes the code simpler
to follow and provides consistency with the other responses that are
handled here.
The commit e650dbde86 that stripped off [brackets] from ipv6-only host
headers for the sake of cookie parsing wrongly incremented the host
pointer which would cause a bad free() call later on.
The refactoring of HTTP CONNECT handling in commit 41b0237834 that
made it protocol independent broke it for the multi interface. This fix
now introduce a better state handling and moved some logic to the
http_proxy.c source file.
Reported by: Yang Tse
Bug: http://curl.haxx.se/mail/lib-2012-03/0162.html
Changed the returned curl error codes for EHLO and HELO responses from
CURLE_LOGIN_DENIED to CURLE_REMOTE_ACCESS_DENIED as a negative response
from these commands represents no service as opposed to a login error.
An alternative would be:
1. specify HTTPS_CA_DIR and/or HTTPS_CA_FILE
2. ensure that Net::SSL is being used, and IO::Socket::SSL is NOT being
used
This question and answer explain:
http://stackoverflow.com/questions/74358/
Curl_protocol_connect() now does the tunneling through the HTTP proxy if
requested instead of letting each protocol specific connection function
do it.
Commit 466150bc64 fixed the Host: header with CONNECT, but I then
forgot the preceeding request-line. Now this too uses [brackets]
properly if a ipv6 numerical address was given.
Bug: http://curl.haxx.se/bug/view.cgi?id=3493129
Reported by: "Blacat"
Set the conn->data->info.httpcode variable in smtp_statemach_act() to
allow Curl_getinfo() to return the SMTP response code via the
CURLINFO_RESPONSE_CODE action.
Curl_pop3_write() would drop the final CRLF of a message as it was
considered part of the EOB as opposed to part of the message. Whilst
the EOB sequence needs to be searched for by the function only the
final 3 characters should be removed as per RFC-1939 section 3.
Reported by: Rich Gray
Bug: http://curl.haxx.se/mail/lib-2012-02/0051.html
Curl_smtp_escape_eob() would leave off final CRLFs from emails ending
in multiple blank lines additionally leaving the smtpc->eob variable
with the character count in, which would cause problems for additional
emails when sent through multiple calls to curl_easy_perform() after a
CURLOPT_CONNECT_ONLY.
Fixed the use of angled brackets "<>" in the optional AUTH parameter as
per RFC-2554 section 5. The address should not include them but an
empty address should be replaced by them.
Added a new CURLOPT_MAIL_AUTH option that allows the calling program to
set the optional AUTH parameter in the MAIL FROM command.
When this option is specified and an authentication mechanism is used
to communicate with the mail server then the AUTH parameter will be
included in the MAIL FROM command. This is particularly useful when the
calling program is acting as a relay in a trusted environment and
performing server to server communication, as it allows the relaying
server to specify the address of the mailbox that was used to
authenticate and send the original email.
Modify configure.ac to test for new CyaSSL Init function and remove
default install path to system. Change to CyaSSL OpenSSL header and
proper Init in code as well.
Note that this no longer detects or works with CyaSSL before v2
Fixed incorrect behavior in smtp_done() which would cause the end of
block data to be sent to the SMTP server if libcurl was operating in
connect only mode. This would cause the server to return an error as
data would not be expected which in turn caused libcurl to return
CURLE_RECV_ERROR.
... by making sure that the string is always freed after the invoke as
parse_proxy will always copy the data and this way there's a single
free() instead of multiple ones.
The proxy parser function strips off trailing slashes off the proxy name
which could lead to a mistaken zero length proxy name which would be
treated as no proxy at all by subsequent functions!
This is now detected and an error is returned. Verified by the new test
1329.
Reported by: Chandrakant Bagul
Bug: http://curl.haxx.se/mail/lib-2012-02/0000.html
Allow an appliction to set libcurl specific SSL options. The first and
only options supported right now is CURLSSLOPT_ALLOW_BEAST.
It will make libcurl to disable any work-arounds the underlying SSL
library may have to address a known security flaw in the SSL3 and TLS1.0
protocol versions.
This is a reaction to us unconditionally removing that behavior after
this security advisory:
http://curl.haxx.se/docs/adv_20120124B.html
... it did however cause a lot of programs to fail because of old
servers not liking this work-around. Now programs can opt to decrease
the security in order to interoperate with old servers better.
This adds three new options to control the behavior of TCP keepalives:
- CURLOPT_TCP_KEEPALIVE: enable/disable probes
- CURLOPT_TCP_KEEPIDLE: idle time before sending first probe
- CURLOPT_TCP_KEEPINTVL: delay between successive probes
While not all operating systems support the TCP_KEEPIDLE and
TCP_KEEPINTVL knobs, the library will still allow these options to be
set by clients, silently ignoring the values.
When CURLOPT_REFERER has been used, curl_easy_reset() did not properly
clear it.
Verified with the new test 598
Bug: http://curl.haxx.se/bug/view.cgi?id=3481551
Reported by: Michael Day
When the target host was given as a IPv6 numerical address, it was not
properly put within square brackets for the Host: header in the CONNECT
request. The "normal" request did fine.
Reported by: "zooloo"
Bug: http://curl.haxx.se/bug/view.cgi?id=3482093
When connecting to a domain with multiple IP addresses, allow different,
decreasing connection timeout values. This should guarantee some
connections attempts with sufficiently long timeouts, while still
providing fallback.
With advice from Nikos Mavrogiannopoulos, changed the priority string to
add "actual priorities" and favour ARCFOUR. This makes libcurl work
better when enforcing SSLv3 with GnuTLS. Both in the sense that the
libmicrohttpd test is now working again but also that it mitigates a
weakness in the older SSL/TLS protocols.
Bug: http://curl.haxx.se/mail/lib-2012-01/0225.html
Reported by: Christian Grothoff
Protocols (IMAP, POP3 and SMTP) that use the path part of a URL in a
decoded manner now use the new Curl_urldecode() function to reject URLs
with embedded control codes (anything that is or decodes to a byte value
less than 32).
URLs containing such codes could easily otherwise be used to do harm and
allow users to do unintended actions with otherwise innocent tools and
applications. Like for example using a URL like
pop3://pop3.example.com/1%0d%0aDELE%201 when the app wants a URL to get
a mail and instead this would delete one.
This flaw is considered a security vulnerability: CVE-2012-0036
Security advisory at: http://curl.haxx.se/docs/adv_20120124.html
Reported by: Dan Fandrich
OpenSSL added a work-around for a SSL 3.0/TLS 1.0 CBC vulnerability
(http://www.openssl.org/~bodo/tls-cbc.txt). In 0.9.6e they added a bit
to SSL_OP_ALL that _disables_ that work-around despite the fact that
SSL_OP_ALL is documented to do "rather harmless" workarounds.
The libcurl code uses the SSL_OP_ALL define and thus logically always
disables the OpenSSL fix.
In order to keep the secure work-around workding, the
SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS bit must not be set and this change
makes sure of this.
Reported by: product-security at Apple
Using a URL with embedded user name and password didn't work if the host
was given as a numerical IPv6 string, like ftp://user:password@[::1]/
Reported by: Brandon Wang
Bug: http://curl.haxx.se/mail/archive-2012-01/0047.html
SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG option enabling allowed successfull
interoperability with web server Netscape Enterprise Server 2.0.1 released
back in 1996 more than 15 years ago.
Due to CVE-2010-4180, option SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG has
become ineffective as of OpenSSL 0.9.8q and 1.0.0c. In order to mitigate
CVE-2010-4180 when using previous OpenSSL versions we no longer enable
this option regardless of OpenSSL version and SSL_OP_ALL definition.
Some functions using getaddrinfo and gethostbyname were still
mistakingly being used/linked even if c-ares was selected as resolver
backend.
Reported by: Arthur Murray
Bug: http://curl.haxx.se/mail/lib-2012-01/0160.html
Previously the code would create a dummy socket while resolving just to
have curl_multi_fdset() return something but the non-win32 version
doesn't do it this way and the creation and use of a socket that isn't
made with the common create-socket callback can be confusing to apps
using the multi_socket API etc.
This change removes the dummy socket and thus will cause
curl_multi_fdset() to return with maxfd == -1 more often.
Fixed a problem in POP3 and IMAP where a connection would fail when
CURLUSESSL_TRY was specified for a server that didn't support
SSL/TLS connections rather than continuing.
The STARTTLS response code in SMTP, POP3 and IMAP would return
CURLE_LOGIN_DENIED rather than CURLE_USE_SSL_FAILED when SSL/TLS
was not available on the server.
Reported by: Gokhan Sengun
Bug: http://curl.haxx.se/mail/lib-2012-01/0018.html
Unfortunately we have no test cases for this and I have no SSPI build or
server to verify this with. The change seems simple enough though.
Bug: http://curl.haxx.se/bug/view.cgi?id=3466497
Reported by: Patrice Guerin
When the buffer gets realloced to hold the file name in the
SSH_SFTP_READDIR_LINK state, the counter was not bumped accordingly.
Reported by: Armel Asselin
Patch by: Armel Asselin
Bug: http://curl.haxx.se/mail/lib-2011-12/0249.html
When a HTTP connection is re-used for a subsequent request without
proxy, it would always re-use the Host: header of the first request. As
host names are case insensitive it would make curl send another host
name case that what the particular request used.
Now it will instead always use the most recent host name to always use
the desired casing.
Added test case 1318 to verify.
Bug: http://curl.haxx.se/mail/lib-2011-12/0314.html
Reported by: Alex Vinnik
The load host names to DNS cache function was moved to hostip.c and it
now makes sure to not add host names that already are present in the
cache. It would previously lead to memory leaks when for example using
the --resolve and multiple URLs on the command line.
The commit 9dd85bc unintentionally changed the way we compute the time
spent waiting for 100-continue. In particular, when using a SSL client
certificate, the time spent by SSL handshake was included and could
cause the CURL_TIMEOUT_EXPECT_100 timeout to be mistakenly fired up.
Bug: https://bugzilla.redhat.com/767490
Reported by: Mamoru Tasaka
ftp_do_more() returns after accepting the server connect however it
needs to fall through and set "*complete" to TRUE before exit from the
function.
Bug: http://curl.haxx.se/mail/lib-2011-12/0250.html
Reported by: Gokhan Sengun
In the recent do_more fix the new logic was mistakenly checking the
pointer instead of what it points to.
Reported by: Gokhan Sengun
Bug: http://curl.haxx.se/mail/lib-2011-12/0250.html
When sending quote command to a SFTP server and 'mkdir' was used, it
would send fixed permissions and not use the CURLOPT_NEW_DIRECTORY_PERMS
as it should.
Reported by: Armel
Patch by: Armel
Bug: http://curl.haxx.se/mail/lib-2011-12/0249.html
CURLOPT_RESOLVE populates the DNS cache with entries that are marked as
eternally in use. Those entries need to be taken care of when the cache
is killed off.
Bug: http://curl.haxx.se/bug/view.cgi?id=3463121
Reported by: "tw84452852"
First off the timeout for accepting a server connect back must of course
respect a global timeout. Then the timeleft function is only used by ftp
code so it was moved to ftp.c and made static.
"wait_data_conn" was added to the connectionbits in commit c834213ad5 for
handling active FTP connections but as it is purely FTP specific and now
only ever accessed by ftp.c I moved it into the FTP connection struct.
Backpedaled out the funny double-change of state in the multi state
machine by adding a new argument to the do_more() function to signal
completion. This way it can remain in the DO_MORE state properly until
done. Long term, the entire DO_MORE logic should be moved into the FTP
code and be hidden from the multi code as the logic is only used for
FTP.
