Daniel Stenberg
1003628103
Only active the engine code if ssl is enabled. This is how the actual engine
...
member in the struct is used.
2004-09-28 07:11:32 +00:00
Daniel Stenberg
c189687188
allow setting CURLOPT_SSLENGINE to NULL even if no SSL engine is supported
2004-09-25 21:28:26 +00:00
Daniel Stenberg
6a06667cc0
Added CURLOPT_FTPSSLAUTH
2004-09-16 21:45:16 +00:00
Daniel Stenberg
b8b56248bd
- Bug report #1025986 . When following a Location: with a custom Host: header
...
replacement, curl only replaced the Host: header on the initial request
and didn't replace it on the following ones. This resulted in requests with
two Host: headers.
Now, curl checks if the location is on the same host as the initial request
and then continues to replace the Host: header. And when it moves to another
host, it doesn't replace the Host: header but it also doesn't make the
second Host: header get used in the request.
This change is verified by the two new test cases 184 and 185.
2004-09-10 20:58:51 +00:00
Daniel Stenberg
2646af106b
allow a custom "Accept-Encoding:" header override the internally set one
...
that gets set with CURLOPT_ENCODING
2004-08-16 13:25:30 +00:00
Daniel Stenberg
d5bdf5f89c
Ok, setting CURLOPT_POST to 0 will now convert the request to a GET (this
...
remains undocumented as this is not the way we recommend)
2004-08-10 13:21:32 +00:00
Daniel Stenberg
0cfa9b52ae
prevent all the sig and alarm stuff when using ares
2004-07-29 08:06:33 +00:00
Daniel Stenberg
b9f1dd7691
Bertrand Demiddelaer fixed the host name to get setup properly even when
...
a connection is re-used, when a proxy is in use.
2004-07-28 21:27:33 +00:00
Gunter Knauf
03cb3b9db1
ifdef keep_sigact since its only used when SIGALRM is defined.
2004-07-10 23:11:22 +00:00
Daniel Stenberg
17841a20e3
explicit typecasts when converting from long to int to avoid warnings
2004-07-04 21:37:35 +00:00
Daniel Stenberg
d2e6a0583a
made 'connectindex' a long variable to prevent compiler warnings when
...
implicitly converting it to int
2004-07-04 21:36:14 +00:00
Daniel Stenberg
f05d47ddd6
variable type cleanup to fix picky compiler warnings
2004-07-01 07:43:20 +00:00
Daniel Stenberg
185baf036b
NOBODY set TRUE after a POST makes a good HEAD now
2004-06-30 11:09:16 +00:00
Daniel Stenberg
00ee738fdd
typecasts to prevent warnings
2004-06-24 09:14:59 +00:00
Daniel Stenberg
c39858aac0
Source cleanups. The major one being that we now _always_ use a Curl_addrinfo
...
linked list for name resolved data, even on hosts/systems with only IPv4
stacks as this simplifies a lot of code.
2004-06-24 07:43:48 +00:00
Daniel Stenberg
d73425061a
Moved the "About to connect() to" text to the place where the host name is
...
actually known, as before this text lied when used in i.e FTP.
2004-06-22 15:23:01 +00:00
Daniel Stenberg
bd3d5a17b4
Gisle's "SSL patch" from June 16th 2004, modified by me as discussed on the
...
mailing list.
2004-06-18 06:20:43 +00:00
Daniel Stenberg
9f341f9ce5
Gisle Vanem's improved verbose output and timeout handling when connecting to
...
a host name that resolves to multiple IP addresses.
2004-06-10 11:06:21 +00:00
Daniel Stenberg
90037b85d1
Alexander Krasnostavsky's fix to make libcurl build fine with configure
...
--disable-http, which thus builds a libcurl without HTTP support.
2004-06-09 08:23:55 +00:00
Daniel Stenberg
ea81dd9e2e
Alexander Krasnostavsky's FTP third party transfer (proxy) support
2004-06-03 11:41:05 +00:00
Daniel Stenberg
d3f796ac59
Made CURLOPT_UPLOAD and CURLOPT_PUT mean the same thing internally (the
...
previous difference was not clear nor documented properly). They can now both
be used interchangeably, but we prefer UPLOAD to PUT since it is a more
generic term.
2004-06-02 13:57:38 +00:00
Daniel Stenberg
aca79af7de
check for failing strdup()s
2004-05-28 09:56:59 +00:00
Daniel Stenberg
2c43d64302
Added a new 'bit' in the connect struct named 'tunnel_proxy' that is set
...
if a connection is tunneled through a proxy. A tunnel is done with CONNECT,
either when using HTTPS or FTPS, or if explicitly enabled by the app.
2004-05-26 08:54:36 +00:00
Daniel Stenberg
fd802db39f
initial support for "uploading" to file:// URLs
2004-05-25 21:47:29 +00:00
Daniel Stenberg
0912015a5c
preprocessor magic around the libidn idn_free() stuff to remain workable
...
both with older libidn versions without idn_free() and with libidn versions
that gets installed without idn-free.h
2004-05-25 12:00:15 +00:00
Daniel Stenberg
85b2056dc7
only idn_free() if built with libidn
2004-05-24 08:19:37 +00:00
Daniel Stenberg
24420c2191
Simon Josefsson added a idn_free() function in libidn 0.4.5 as a reaction to
...
Gisle's previous mail. We now use this function, and thus we require libidn
0.4.5 or later. No earler version will do.
2004-05-24 07:40:00 +00:00
Daniel Stenberg
59f904d8de
Robert D. Young reported that CURLOPT_COOKIEFILE and CURLOPT_COOKIE could
...
not be used both in one request. Fixed it and added test case 172 to verify.
2004-05-24 07:13:48 +00:00
Daniel Stenberg
cdd70596df
killed trailing whitespace
2004-05-19 09:25:00 +00:00
Daniel Stenberg
8001921112
I made Curl_done() take a pointer-pointer in the first argument instead, and
...
if the connection is killed it blanks the pointer it points to, to make it
easier to detect usage problems whereever Curl_done() is used.
2004-05-17 08:05:46 +00:00
Daniel Stenberg
b121e41ec3
bail out when no memory occurs
2004-05-13 14:12:49 +00:00
Daniel Stenberg
aa3ae01878
clean up and return better on out of memory
2004-05-12 13:05:01 +00:00
Daniel Stenberg
d60c22572b
Curl_done() and the protocol-specific conn->curl_done() functions now all
...
take a CURLcode as a second argument, that is non-zero when Curl_done()
is called after an error was returned from Curl_do() (or similar).
2004-05-12 12:06:39 +00:00
Daniel Stenberg
d301d69fbf
bail out if we can't allocate the new range string, and make use of aprintf()
...
instead of using snprintf() + strdup().
2004-05-12 08:26:56 +00:00
Daniel Stenberg
2f60e91a9b
removed another jhrg-reference in a comment
2004-05-12 07:56:01 +00:00
Daniel Stenberg
98f968f2ee
fixed Curl_open() to not leak anything if one malloc() fails, fix by
...
James Bursa only modified by me.
2004-05-11 21:17:03 +00:00
Daniel Stenberg
bbafb2eb27
curl_global_init_mem() allows the memory functions to be replaced.
...
memory.h is included everywhere for this.
2004-05-11 11:30:23 +00:00
Daniel Stenberg
3394c01826
We don't support any long protocol names so we can use a smaller buffer.
...
Also, make sure we have room for the trailing zero, only scan to size-1.
Gisle Vanem reported.
2004-05-07 18:46:28 +00:00
Daniel Stenberg
91c8be3628
removed two odd comments
2004-05-06 15:17:10 +00:00
Daniel Stenberg
7591e07b7c
do the alarm time-left math using unsigned longs since that is what alarm()
...
returns and uses as input and converting to signed generates warnings and
actually risks loss of accuracy
2004-05-05 07:17:37 +00:00
Daniel Stenberg
35ab93f484
fix_hostname() now (void)s the conn argument to prevent warnings on non-idn
...
enabled builds
2004-05-05 07:08:31 +00:00
Daniel Stenberg
4d9517f0b4
prevent warnings when using the gcc option -Wunreachable-code
2004-05-05 06:57:26 +00:00
Daniel Stenberg
fc6eff13b5
General HTTP authentication cleanup and fixes
2004-05-04 07:52:53 +00:00
Daniel Stenberg
59907ebc0e
fixed the host/proxy name issue when re-using a connection and made IDN names
...
work when using proxy by converting the IDN-name to the ACE-encoded version
before the request-URL is passed to the proxy.
2004-04-29 13:41:48 +00:00
Daniel Stenberg
8ca37dd1c7
encode the correct name
2004-04-29 11:57:52 +00:00
Daniel Stenberg
4b9f8e766d
Made host name and proxy name get stored in a 'struct hostname' and set
...
all things up to work with encoded host names internally, as well as keeping
'display names' to show in debug messages. IDN resolves work for me now using
ipv6, ipv4 and ares resolving. Even cookies on IDN sites seem to do right.
2004-04-27 13:56:23 +00:00
Daniel Stenberg
e218811ca3
made the verbose connect use the proper host name string even when using
...
a proxy
2004-04-26 15:19:55 +00:00
Daniel Stenberg
a9f2274bd8
NI_MAXHOST is not generally available, we use plain 256 bytes for the hostname
...
instead, its only for debug verbose output anyway
2004-04-26 15:14:19 +00:00
Daniel Stenberg
245e3122df
Made defines instead of plain numbers for the Curl_resolv() return code to
...
make the code easier to read
2004-04-26 14:18:00 +00:00
Daniel Stenberg
f5042cce34
IDN adjustments and host cleanups by Gisle
2004-04-26 14:03:25 +00:00