Add a new type of callback to Curl_handler which performs checks on
the connection. Alter RTSP so that it uses this callback to do its
own check on connection health.
mk-lib1521.pl generates a test program (lib1521.c) that calls
curl_easy_setopt() for every known option with a few typical values to
make sure they work (ignoring the return codes).
Some small changes were necessary to avoid asserts and NULL accesses
when doing this.
The perl script needs to be manually rerun when we add new options.
Closes#1543
... since the total amount is low this is faster, easier and reduces
memory overhead.
Also, Curl_expire_done() can now mark an expire timeout as done so that
it never times out.
Closes#1472
A) reduces the timeout lists drastically
B) prevents a lot of superfluous loops for timers that expires "in vain"
when it has actually already been extended to fire later on
This fixes the following clang warnings:
http2.c:184:27: error: no previous extern declaration for non-static
variable 'Curl_handler_http2' [-Werror,-Wmissing-variable-declarations]
http2.c:204:27: error: no previous extern declaration for non-static
variable 'Curl_handler_http2_ssl'
[-Werror,-Wmissing-variable-declarations]
When removing an easy handler from a multi before it completed its
transfer, and it had pushed streams, it would segfault due to the pushed
counted not being cleared.
Fixed-by: zelinchen@users.noreply.github.comFixes#1249
- In Curl_http2_switched don't call memcpy when src is NULL.
Curl_http2_switched can be called like:
Curl_http2_switched(conn, NULL, 0);
.. and prior to this change memcpy was then called like:
memcpy(dest, NULL, 0)
.. causing address sanitizer to warn:
http2.c:2057:3: runtime error: null pointer passed as argument 2, which
is declared to never be null
... by making sure we don't count down the "upload left" counter when the
uploaded size is unknown and then it can be allowed to continue forever.
Fixes#996
With HTTP/2 each transfer is made in an indivial logical stream over the
connection, making most previous errors that caused the connection to get
forced-closed now instead just kill the stream and not the connection.
Fixes#941
Since the server can at any time send a HTTP/2 frame to us, we need to
wait for the socket to be readable during all transfers so that we can
act on incoming frames even when uploading etc.
Reminded-by: Tatsuhiro Tsujikawa
After a few wasted hours hunting down the reason for slowness during a
TLS handshake that turned out to be because of TCP_NODELAY not being
set, I think we have enough motivation to toggle the default for this
option. We now enable TCP_NODELAY by default and allow applications to
switch it off.
This also makes --tcp-nodelay unnecessary, but --no-tcp-nodelay can be
used to disable it.
Thanks-to: Tim Rühsen
Bug: https://curl.haxx.se/mail/lib-2016-06/0143.html
Previously, passing a timeout of zero to Curl_expire() was a magic code
for clearing all timeouts for the handle. That is now instead made with
the new Curl_expire_clear() function and thus a 0 timeout is fine to set
and will trigger a timeout ASAP.
This will help removing short delays, in particular notable when doing
HTTP/2.
curl's representation of HTTP/2 responses involves transforming the
response to a format that is similar to HTTP/1.1. Prior to this change,
curl would do this by separating header names and values with only a
colon, without introducing a space after the colon.
While this is technically a valid way to represent a HTTP/1.1 header
block, it is much more common to see a space following the colon. This
change introduces that space, to ensure that incautious tools are safely
able to parse the header block.
This also ensures that the difference between the HTTP/1.1 and HTTP/2
response layout is as minimal as possible.
Bug: https://github.com/curl/curl/issues/797Closes#798Fixes#797
curl_printf.h defines printf to curl_mprintf, etc. This can cause
problems with external headers which may use
__attribute__((format(printf, ...))) markers etc.
To avoid that they cause problems with system includes, we include
curl_printf.h after any system headers. That makes the three last
headers to always be, and we keep them in this order:
curl_printf.h
curl_memory.h
memdebug.h
None of them include system headers, they all do funny #defines.
Reported-by: David Benjamin
Fixes#743
- Error if a header line is larger than supported.
- Warn if cumulative header line length may be larger than supported.
- Allow spaces when parsing the path component.
- Make sure each header line ends in \r\n. This fixes an out of bounds.
- Disallow header continuation lines until we decide what to do.
Ref: https://github.com/curl/curl/issues/659
Ref: https://github.com/curl/curl/pull/663
This commit ensures that streams which was closed in on_stream_close
callback gets passed to http2_handle_stream_close. Previously, this
might not happen. To achieve this, we increment drain property to
forcibly call recv function for that stream.
To more accurately check that we have no pending event before shutting
down HTTP/2 session, we sum up drain property into
http_conn.drain_total. We only shutdown session if that value is 0.
With this commit, when stream was closed before reading response
header fields, error code CURLE_HTTP2_STREAM is returned even if
HTTP/2 level error is NO_ERROR. This signals the upper layer that
stream was closed by error just like TCP connection close in HTTP/1.
Ref: https://github.com/curl/curl/issues/659
Ref: https://github.com/curl/curl/pull/663
This commit ensures that data from network are processed before HTTP/2
session is terminated. This is achieved by pausing nghttp2 whenever
different stream than current easy handle receives data.
This commit also fixes the bug that sometimes processing hangs when
multiple HTTP/2 streams are multiplexed.
Ref: https://github.com/curl/curl/issues/659
Ref: https://github.com/curl/curl/pull/663
Previously, when a stream was closed with other than NGHTTP2_NO_ERROR
by RST_STREAM, underlying TCP connection was dropped. This is
undesirable since there may be other streams multiplexed and they are
very much fine. This change introduce new error code
CURLE_HTTP2_STREAM, which indicates stream error that only affects the
relevant stream, and connection should be kept open. The existing
CURLE_HTTP2 means connection error in general.
Ref: https://github.com/curl/curl/issues/659
Ref: https://github.com/curl/curl/pull/663
... but ignore EAGAIN if the stream has ended so that we don't end up in
a loop. This is a follow-up to c8ab613 in order to avoid the problem
d261652 was made to fix.
Reported-by: Jay Satiro
Clues-provided-by: Tatsuhiro Tsujikawa
Discussed in #750
It turns out the google GFE HTTP/2 servers send a PING frame immediately
after a stream ends and its last DATA has been received by curl. So if
we don't drain that from the socket, it makes the socket readable in
subsequent checks and libcurl then (wrongly) assumes the connection is
dead when trying to reuse the connection.
Reported-by: Joonas Kuorilehto
Discussed in #750
It offers extra info from nghttp2 in certain error cases. Like for
example when trying prior-knowledge http2 on a server that doesn't speak
http2 at all. The error message is passed on as a verbose message to
libcurl.
Discussed in #722
The error callback was added in nghttp2 1.9.0
Since commit a5aec58 the handler schemes need to match for the
connections to be reused and for HTTP/2 multiplexing to work, reusing
connections is very important!
Closes#736
Check that the trailer buffer exists before attempting a client write
for trailers on stream close.
Refer to comments in https://github.com/bagder/curl/pull/564
This commit adds trailer support in HTTP/2. In HTTP/1.1, chunked
encoding must be used to send trialer fields. HTTP/2 deprecated any
trandfer-encoding, including chunked. But trailer fields are now
always available.
Since trailer fields are relatively rare these days (gRPC uses them
extensively though), allocating buffer for trailer fields is done when
we detect that HEADERS frame containing trailer fields is started. We
use Curl_add_buffer_* functions to buffer all trailers, just like we
do for regular header fields. And then deliver them when stream is
closed. We have to be careful here so that all data are delivered to
upper layer before sending trailers to the application.
We can deliver trailer field one by one using NGHTTP2_ERR_PAUSE
mechanism, but current method is far more simple.
Another possibility is use chunked encoding internally for HTTP/2
traffic. I have not tested it, but it could add another overhead.
Closes#564
When NGHTTP2_ERR_PAUSE is returned from data_source_read_callback, we
might not process DATA frame fully. Calling nghttp2_session_mem_recv()
again will continue to process DATA frame, but if there is no incoming
frames, then we have to call it again with 0-length data. Without this,
on_stream_close callback will not be called, and stream could be hanged.
Bug: http://curl.haxx.se/mail/lib-2015-11/0103.html
Reported-by: Francisco Moraes
They tend to never get updated anyway so they're frequently inaccurate
and we never go back to revisit them anyway. We document issues to work
on properly in KNOWN_BUGS and TODO instead.
Removed wrong assert()s
The 'conn' passed in as userdata can be used and there can be other
sessionhandles ('data') than the single one this checked for.
For a single-stream download from localhost, we managed to increase
transfer speed from 1.6MB/sec to around 400MB/sec, mostly because of
this single fix.
... only call it when there is data arriving for another handle than the
one that is currently driving it.
Improves single-stream download performance quite a lot.
Thanks-to: Tatsuhiro Tsujikawa
Bug: http://curl.haxx.se/mail/lib-2015-09/0097.html
RFC 7540 section 8.1.2.2 states: "An endpoint MUST NOT generate an
HTTP/2 message containing connection-specific header fields; any message
containing connection-specific header fields MUST be treated as
malformed"
Closes#401
Return 0 instead of NGHTTP2_ERR_CALLBACK_FAILURE if we can't locate the
SessionHandle. Apparently mod_h2 will sometimes send a frame for a
stream_id we're finished with.
Use nghttp2_session_get_stream_user_data and
nghttp2_session_set_stream_user_data to identify SessionHandles instead
of a hash.
Closes#372
Otherwise it would never be called for an HTTP/2 connection, which has
its own disconnect handler.
I spotted this while debugging <https://bugzilla.redhat.com/1248389>
where the http_disconnect() handler was called on an FTP session handle
causing 'dnf' to crash. conn->data->req.protop of type (struct FTP *)
was reinterpreted as type (struct HTTP *) which resulted in SIGSEGV in
Curl_add_buffer_free() after printing the "Connection cache is full,
closing the oldest one." message.
A previously working version of libcurl started to crash after it was
recompiled with the HTTP/2 support despite the HTTP/2 protocol was not
actually used. This commit makes it work again although I suspect the
root cause (reinterpreting session handle data of incompatible protocol)
still has to be fixed. Otherwise the same will happen when mixing FTP
and HTTP/2 connections and exceeding the connection cache limit.
Reported-by: Tomas Tomecek
Bug: https://bugzilla.redhat.com/1248389
Since we do prefix match using given header by application code
against header name pair in format "NAME:VALUE", and VALUE part can
contain ":", we have to careful about existence of ":" in header
parameter. ":" should be allowed to match HTTP/2 pseudo-header field,
and other use of ":" in header must be treated as error, and
curl_pushheader_byname should return NULL. This commit implements
this behaviour.
Previously, after seeing upgrade to HTTP/2, we feed data followed by
upgrade response headers directly to nghttp2_session_mem_recv() in
Curl_http2_switched(). But it turns out that passed buffer, mem, is
part of stream->mem, and callbacks called by
nghttp2_session_mem_recv() will write stream specific data into
stream->mem, overwriting input data. This will corrupt input, and
most likely frame length error is detected by nghttp2 library. The
fix is first copy the passed data to HTTP/2 connection buffer,
httpc->inbuf, and call nghttp2_session_mem_recv().
Coverity CID 1299426 warned about possible NULL dereference otherwise,
but that would only ever happen if we get invalid HTTP/2 data with
frames for stream 0. Avoid this risk by returning early when stream 0 is
used.
