The preprocessor check that sets up the 32bit defines for non-configure
builds didn't work properly for MIPS systems as __mips__ is defined for
both 32bit and 64bit. Now __LP64__ is also checked and indicates 64bit.
Reported-by: Tomas Jakobsson
Fixes#813
Previously, when a stream was closed with other than NGHTTP2_NO_ERROR
by RST_STREAM, underlying TCP connection was dropped. This is
undesirable since there may be other streams multiplexed and they are
very much fine. This change introduce new error code
CURLE_HTTP2_STREAM, which indicates stream error that only affects the
relevant stream, and connection should be kept open. The existing
CURLE_HTTP2 means connection error in general.
Ref: https://github.com/curl/curl/issues/659
Ref: https://github.com/curl/curl/pull/663
As these two options provide identical functionality, the former for
SOCK5 proxies and the latter for HTTP proxies, merged the two options
together.
As such CURLOPT_SOCKS5_GSSAPI_SERVICE is marked as deprecated as of
7.49.0.
So that we only do the extra typedefs in curl_memory.h when we really
need to and avoid double typedefs.
follow-up commit to 7218b52c49
Thanks-to: Steve Holme
The define is not in our name space and is therefore not protected by
our API promises.
It was only really used by libcurl internals but was mostly erased from
there already in 8aabbf5 (March 2015). This is supposedly the final
death blow to that define from everywhere.
As a side-effect, making sure _MPRINTF_REPLACE is gone and not used, I
made the lib tests in tests/libtest/ use curl_printf.h for its redefine
magic and then subsequently the use of sprintf() got banned in the tests
as well (as it is in libcurl internals) and I then replaced them all
with snprintf().
In the unlikely event that any users is actually using this define and
gets sad by this change, it is very easily copied to the user's own
code.
Supports HTTP/2 over clear TCP
- Optimize switching to HTTP/2 by removing calls to init and setup
before switching. Switching will eventually call setup and setup calls
init.
- Supports new version to “force” the use of HTTP/2 over clean TCP
- Add common line parameter “--http2-prior-knowledge” to the Curl
command line tool.
The two options are almost the same, except in the case of OpenSSL:
CURLINFO_TLS_SESSION OpenSSL session internals is SSL_CTX *.
CURLINFO_TLS_SSL_PTR OpenSSL session internals is SSL *.
For backwards compatibility we couldn't modify CURLINFO_TLS_SESSION to
return an SSL pointer for OpenSSL.
Also, add support for the 'internals' member to point to SSL object for
the other backends axTLS, PolarSSL, Secure Channel, Secure Transport and
wolfSSL.
Bug: https://github.com/curl/curl/issues/234
Reported-by: dkjjr89@users.noreply.github.com
Bug: https://curl.haxx.se/mail/lib-2015-09/0127.html
Reported-by: Michael König
Some TFTP server implementations ignore the "TFTP Option extension"
(RFC 1782-1784, 2347-2349), or implement it in a flawed way, causing
problems with libcurl. Another switch for curl_easy_setopt
"CURLOPT_TFTP_NO_OPTIONS" is introduced which prevents libcurl from
sending TFTP option requests to a server, avoiding many problems caused
by faulty implementations.
Bug: https://github.com/curl/curl/issues/481
The name of the header guard in lwIP's <lwip/opt.h> has changed from
'__LWIP_OPT_H__' to 'LWIP_HDR_OPT_H' (bug #35874 in May 2015).
Other fixes:
- In curl_setup.h, the problem with an old PSDK doesn't apply if lwIP is
used.
- In memdebug.h, the 'socket' should be undefined first due to lwIP's
lwip_socket() macro.
- In curl_addrinfo.c lwIP's getaddrinfo() + freeaddrinfo() macros need
special handling because they were undef'ed in memdebug.h.
- In select.c we can't use preprocessor conditionals inside select if
MSVC and select is a macro, as it is with lwIP.
http://curl.haxx.se/mail/lib-2015-12/0023.htmlhttp://curl.haxx.se/mail/lib-2015-12/0024.html
Fixes a name space pollution at the cost of programs using one of these
defines will no longer compile. However, the vast majority of libcurl
programs that do multipart formposts use curl_formadd() to build this
list.
Closes#506
This patch addresses known bug #76, where on 64-bit Windows SOCKET is 64
bits wide, but long is only 32, making CURLINFO_LASTSOCKET unreliable.
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
- Add new option CURLOPT_DEFAULT_PROTOCOL to allow specifying a default
protocol for schemeless URLs.
- Add new tool option --proto-default to expose
CURLOPT_DEFAULT_PROTOCOL.
In the case of schemeless URLs libcurl will behave in this way:
When the option is used libcurl will use the supplied default.
When the option is not used, libcurl will follow its usual plan of
guessing from the hostname and falling back to 'http'.
New tool option --ssl-no-revoke.
New value CURLSSLOPT_NO_REVOKE for CURLOPT_SSL_OPTIONS.
Currently this option applies only to WinSSL where we have automatic
certificate revocation checking by default. According to the
ssl-compared chart there are other backends that have automatic checking
(NSS, wolfSSL and DarwinSSL) so we could possibly accommodate them at
some later point.
Bug: https://github.com/bagder/curl/issues/264
Reported-by: zenden2k <zenden2k@gmail.com>
This option can be used to enable/disable certificate status verification using
the "Certificate Status Request" TLS extension defined in RFC6066 section 8.
This also adds the CURLE_SSL_INVALIDCERTSTATUS error, to be used when the
certificate status verification fails, and the Curl_ssl_cert_status_request()
function, used to check whether the SSL backend supports the status_request
extension.
For consistency, as we seem to have a bit of a mixed bag, changed all
instances of ipv4 and ipv6 in comments and documentations to use the
correct case.
The ability to do HTTP requests over a UNIX domain socket has been
requested before, in Apr 2008 [0][1] and Sep 2010 [2]. While a
discussion happened, no patch seems to get through. I decided to give it
a go since I need to test a nginx HTTP server which listens on a UNIX
domain socket.
One patch [3] seems to make it possible to use the
CURLOPT_OPENSOCKETFUNCTION function to gain a UNIX domain socket.
Another person wrote a Go program which can do HTTP over a UNIX socket
for Docker[4] which uses a special URL scheme (though the name contains
cURL, it has no relation to the cURL library).
This patch considers support for UNIX domain sockets at the same level
as HTTP proxies / IPv6, it acts as an intermediate socket provider and
not as a separate protocol. Since this feature affects network
operations, a new feature flag was added ("unix-sockets") with a
corresponding CURL_VERSION_UNIX_SOCKETS macro.
A new CURLOPT_UNIX_SOCKET_PATH option is added and documented. This
option enables UNIX domain sockets support for all requests on the
handle (replacing IP sockets and skipping proxies).
A new configure option (--enable-unix-sockets) and CMake option
(ENABLE_UNIX_SOCKETS) can disable this optional feature. Note that I
deliberately did not mark this feature as advanced, this is a
feature/component that should easily be available.
[0]: http://curl.haxx.se/mail/lib-2008-04/0279.html
[1]: http://daniel.haxx.se/blog/2008/04/14/http-over-unix-domain-sockets/
[2]: http://sourceforge.net/p/curl/feature-requests/53/
[3]: http://curl.haxx.se/mail/lib-2008-04/0361.html
[4]: https://github.com/Soulou/curl-unix-socket
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
As the list has gotten a little messy and hard to read, especially with
the introduction of deprecated items, aligned the values and comments
into clean columns and reworked some of the comments in the process.
Option --pinnedpubkey takes a path to a public key in DER format and
only connect if it matches (currently only implemented with OpenSSL).
Provides CURLOPT_PINNEDPUBLICKEY for curl_easy_setopt().
Extract a public RSA key from a website like so:
openssl s_client -connect google.com:443 2>&1 < /dev/null | \
sed -n '/-----BEGIN/,/-----END/p' | openssl x509 -noout -pubkey \
| openssl rsa -pubin -outform DER > google.com.der
Removing defines, even obsolete ones that haven't been used for a very
long time, still break a lot of applications.
Bug: https://github.com/bagder/curl/pull/106
1 - fixes the warnings when built without http2 support
2 - adds CURLE_HTTP2, a new error code for errors detected by nghttp2
basically when they are about http2 specific things.
- Replace CURLAUTH_GSSNEGOTIATE with CURLAUTH_NEGOTIATE
- CURL_VERSION_GSSNEGOTIATE is deprecated which
is served by CURL_VERSION_SSPI, CURL_VERSION_GSSAPI and
CURUL_VERSION_SPNEGO now.
- Remove display of feature 'GSS-Negotiate'
We now provide the "real" names in the CINIT() macro setup for CURLOPT_*
symbols, and we provide backwards compatibility defines for the old
symbols as defines instead of vice versa.
This allows us to better use the CINIT() list to check for existing and
current option names.
Daniel Stenberg
Travis Burtrum