Yang Tse
21ee1c2d01
Allow --enable-largefile and --disable-largefile configurations.
...
Configure process no longer needs nor checks size of curl_off_t.
Library will now be built with _REENTRANT symbol defined.
2008-07-15 16:43:39 +00:00
Yang Tse
a00febe1a0
add comment for include paths
2008-07-15 13:54:30 +00:00
Yang Tse
1e7125ae7b
add comment for include paths
2008-07-15 05:46:49 +00:00
Dan Fandrich
aa4a7471dd
Added test1042 and test1043 to test -C - on HTTP.
2008-07-15 04:12:15 +00:00
Dan Fandrich
69a03ce23c
Added test1040 and test1041 to test -C - on HTTP. Test 1041 failed so it's
...
added to DISABLED.
2008-07-15 03:36:38 +00:00
Yang Tse
0f50cd7623
Move _REENTRANT definition earlier in lib/setup.h
2008-07-14 17:31:39 +00:00
Yang Tse
669c555874
Removed inclusion of remaining system header files from configuration files.
...
These are included from lib/setup.h or specific source code file.
2008-07-14 16:58:34 +00:00
Yang Tse
1cfb73a129
Inclusion of <extra/stricmp.h> and <extra/strdup.h> is moved to lib/setup.h
2008-07-14 16:10:29 +00:00
Yang Tse
2a585c2fba
Remove duplicate file inclusions. These are already done in lib/setup.h
...
and lib/setup_once.h
2008-07-14 15:58:02 +00:00
Yang Tse
32a83128e6
Remove duplicate file inclusions. These are already done in lib/setup.h
2008-07-14 15:30:26 +00:00
Yang Tse
fe7bb33af8
HTTP_ONLY definition check in lib/setup.h is now done once that configuration
...
file has been included. In this way if symbol is defined in the config file
it will no longer be ignored.
2008-07-14 12:39:50 +00:00
Yang Tse
da6fa34f02
fix multiple header inclusion prevention definition
2008-07-11 18:59:00 +00:00
Yang Tse
37a358ab93
move multiple header inclusion prevention definition to top of file
2008-07-11 18:52:35 +00:00
Yang Tse
3452c8d693
Added missing multiple header inclusion prevention definition
2008-07-11 18:42:30 +00:00
Dan Fandrich
336992cc54
Fixed test 553 to pass the torture test.
2008-07-11 18:23:06 +00:00
Dan Fandrich
13afcbd1eb
Avoid a potential zombie process when killing an old ftpserver
2008-07-11 17:18:37 +00:00
Daniel Stenberg
e58a3fd0aa
document the exit codes 82 and 83 that are new in 7.19.0
2008-07-11 10:50:30 +00:00
Daniel Stenberg
57625b6c4c
indent and comment cleanup (no code change)
2008-07-11 09:18:30 +00:00
Daniel Stenberg
0d058d2174
- Daniel Fandrich found out we didn't pass on the user-agent properly when
...
doing "proxy-tunnels" with non-HTTP prototols and that was simply because
the code assumed the user-agent was only needed for HTTP.
2008-07-11 09:08:27 +00:00
Dan Fandrich
8d49a8f278
Added test cases 1038 and 1039 to test Adrian Kreher's report that ftp
...
uploads with -C - didn't resume properly, but the tests pass.
2008-07-11 05:08:06 +00:00
Dan Fandrich
b4b6cfdb1c
Changed slightly the SFTP quote commands chmod, chown and chgrp to only
...
set the attribute that has changed instead of all possible ones. Hopefully,
this will solve the "Permission denied" problem that Nagarajan Sreenivasan
reported when setting some modes, but regardless, it saves a protocol
round trip in the chmod case.
2008-07-11 04:38:11 +00:00
Daniel Stenberg
6b7ccde156
(Added in the section for CURLOPT_DNS_CACHE_TIMEOUT, pointed out on the
...
curl-library list on July 9th 2008 by Mathew Hounsell)
NOTE: the name resolve functions of various libc implementations don't re-read
name server information unless explicitly told so (by for example calling
Ires_init(3). This may cause libcurl to keep using the older server even
if DHCP has updated the server info, and this may look like a DNS cache issue
to the casual libcurl-app user.
2008-07-10 22:24:11 +00:00
Daniel Stenberg
9b0fd007fd
--remote-name-all
2008-07-10 20:29:27 +00:00
Dan Fandrich
6f3ef94836
Fixed another OOM problem, this time with test 64.
2008-07-10 18:15:22 +00:00
Yang Tse
08ac9866e0
Peter Lamberg filed bug report #2015126 : "poll gives WSAEINVAL when POLLPRI
...
is set in fdset.events" (http://curl.haxx.se/bug/view.cgi?id=2015126 ) which
exactly pinpointed the problem only triggered on Windows Vista, provided
reference to docs and also a fix. There is much work behind Peter Lamberg's
excellent bug report. Thank You!
2008-07-10 18:01:44 +00:00
Daniel Stenberg
a17fadea3a
updated to match current reality
2008-07-10 13:40:59 +00:00
Yang Tse
e30bbfd85d
fix compiler warning
2008-07-10 08:21:48 +00:00
Daniel Stenberg
120f9d81b2
s/muse/must
2008-07-10 08:00:05 +00:00
Daniel Stenberg
fa38839a80
document --remote-name-all
2008-07-10 07:53:10 +00:00
Yang Tse
d8f109176c
fallback to gettimeofday when monotonic clock is unavailable at run-time
2008-07-10 07:16:45 +00:00
Dan Fandrich
bbb1b99ce1
Added tests 1036 and 1037 to verify resumed ftp downloads with -C -
2008-07-10 06:09:03 +00:00
Daniel Stenberg
0cd8840dba
- Andreas Schuldei improved Phil Blundell's patch for IPv6 using c-ares, and I
...
edited it slightly. Now you should be able to use IPv6 addresses fine even
with libcurl built to use c-ares.
2008-07-09 18:39:49 +00:00
Dan Fandrich
d4b253ba3e
Fixed an OOM handling problem that cause test 11 to fail the torture test.
2008-07-09 18:33:35 +00:00
Yang Tse
aee7fc118b
since Jun 30 2008 MAXHOSTNAMELEN define is no longer used
2008-07-09 16:38:55 +00:00
Dan Fandrich
60f0b4fffe
Fixed test 554 to pass the torture test.
2008-07-08 21:16:18 +00:00
Gisle Vanem
a95e600eb0
Added libidn libs as needed. Added compilation of sendrecv.c
...
and cookie_interface.c.
2008-07-08 13:55:20 +00:00
Dan Fandrich
a25959184e
Added test cases 1034 & 1035 to test IDN name conversion failures.
2008-07-07 23:52:52 +00:00
Daniel Stenberg
0e5da5b8bc
- Scott Barrett provided a test case for a segfault in the FTP code and the
...
fix for it. It occured when you did a FTP transfer using
CURLFTPMETHOD_SINGLECWD and then did another one on the same easy handle but
switched to CURLFTPMETHOD_NOCWD. Due to the "dir depth" variable not being
cleared properly. Scott's test case is now known as test 539 and it
verifies the fix.
2008-07-07 20:37:07 +00:00
Patrick Monnerat
ddfa4b8896
New options added to OS400 wrapper and ILERPG definitions.
...
Wrong defines (typos) for QSSL layer fixed.
2008-07-07 10:39:46 +00:00
Yang Tse
d816a11bca
fix c-ares version reported in generated libcares.pc file when building
...
from CVS tree.
2008-07-07 02:11:21 +00:00
Yang Tse
7820391cb9
fix compiler warning: empty body in an if-statement
2008-07-05 03:31:41 +00:00
Yang Tse
148866bc73
mention that egrep and ar are also mandatory
2008-07-05 03:12:47 +00:00
Yang Tse
0b57c47547
egrep and ar are also mandatory
2008-07-04 04:03:55 +00:00
Daniel Stenberg
02db4450df
just to clarify that c-ares actually have some ipv6 support
2008-07-03 11:41:11 +00:00
Daniel Stenberg
ed7af82bdf
ares_gethostbyname() fallback from AAA to A records with CNAME present
2008-07-03 11:34:34 +00:00
Daniel Stenberg
e3b5673e98
- Phil Blundell: If you ask ares_gethostbyname() to do an AF_INET6 lookup and
...
the target host has only A records, it automatically falls back to an
AF_INET lookup and gives you the A results. However, if the target host has
a CNAME record, this behaviour is defeated since the original query does
return some data even though ares_parse_aaa_reply() doesn't consider it
relevant. Here's a small patch to make it behave the same with and without
the CNAME.
2008-07-03 11:32:35 +00:00
Daniel Stenberg
82412f218f
Phil Blundell provided a fix for libcurl's treatment of unexpected 1xx
...
response codes. Previously libcurl would hang on such occurances. I added
test case 1033 to verify.
2008-07-03 08:47:53 +00:00
Daniel Stenberg
7c648782bc
Introcuding a new timestamp for curl_easy_getinfo():
...
CURLINFO_APPCONNECT_TIME. This is set with the "application layer"
handshake/connection is completed (typically SSL, TLS or SSH). By using this
you can figure out the application layer's own connect time. You can extract
the time stamp using curl's -w option and the new variable named
'time_appconnect'. This feature was sponsored by Lenny Rachitsky at NeuStar.
2008-07-03 06:56:03 +00:00
Dan Fandrich
ee64d14733
Support Open Watcom C on Linux (as well as Windows).
2008-07-02 18:34:00 +00:00
Yang Tse
bfaab6ed6b
The configure process will now halt when sed or grep are unavailable
2008-07-02 17:42:08 +00:00