When curl and libcurl are built with some protocols disabled, they stop
setting and receiving some options that don't make sense with those
protocols. In particular, when HTTP is disabled many options aren't set
that are used only by HTTP. However, some options that appear to be
HTTP-only are actually used by other protocols as well (some despite
having HTTP in the name) and should be set, but weren't. This change now
causes some of these options to be set and used for more (or for all)
protocols. In particular, this fixes tests 646 through 649 in an
HTTP-disabled build, which use the MIME API in the mail protocols.
A connection can only be reused if the flags "conn_to_host" and
"conn_to_port" match. Therefore it is not necessary to copy these flags
in reuse_conn().
Closes#1918
So far, all of the SSL backends' private data has been declared as
part of the ssl_connect_data struct, in one big #if .. #elif .. #endif
block.
This can only work as long as the SSL backend is a compile-time option,
something we want to change in the next commits.
Therefore, let's encapsulate the exact data needed by each SSL backend
into a private struct, and let's avoid bleeding any SSL backend-specific
information into urldata.h. This is also necessary to allow multiple SSL
backends to be compiled in at the same time, as e.g. OpenSSL's and
CyaSSL's headers cannot be included in the same .c file.
To avoid too many malloc() calls, we simply append the private structs
to the connectdata struct in allocate_conn().
This requires us to take extra care of alignment issues: struct fields
often need to be aligned on certain boundaries e.g. 32-bit values need to
be stored at addresses that divide evenly by 4 (= 32 bit / 8
bit-per-byte).
We do that by assuming that no SSL backend's private data contains any
fields that need to be aligned on boundaries larger than `long long`
(typically 64-bit) would need. Under this assumption, we simply add a
dummy field of type `long long` to the `struct connectdata` struct. This
field will never be accessed but acts as a placeholder for the four
instances of ssl_backend_data instead. the size of each ssl_backend_data
struct is stored in the SSL backend-specific metadata, to allow
allocate_conn() to know how much extra space to allocate, and how to
initialize the ssl[sockindex]->backend and proxy_ssl[sockindex]->backend
pointers.
This would appear to be a little complicated at first, but is really
necessary to encapsulate the private data of each SSL backend correctly.
And we need to encapsulate thusly if we ever want to allow selecting
CyaSSL and OpenSSL at runtime, as their headers cannot be included within
the same .c file (there are just too many conflicting definitions and
declarations for that).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The entire idea of introducing the Curl_ssl struct to describe SSL
backends is to prepare for choosing the SSL backend at runtime.
To that end, convert all the #ifdef have_curlssl_* style conditionals
to use bit flags instead.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The required low-level logic was already available as part of
`libssh2` (via `LIBSSH2_FLAG_COMPRESS` `libssh2_session_flag()`[1]
option.)
This patch adds the new `libcurl` option `CURLOPT_SSH_COMPRESSION`
(boolean) and the new `curl` command-line option `--compressed-ssh`
to request this `libssh2` feature. To have compression enabled, it
is required that the SSH server supports a (zlib) compatible
compression method and that `libssh2` was built with `zlib` support
enabled.
[1] https://www.libssh2.org/libssh2_session_flag.html
Ref: https://github.com/curl/curl/issues/1732
Closes https://github.com/curl/curl/pull/1735
Fixes the below leak:
$ valgrind --leak-check=full ~/install-curl-git/bin/curl --proxy "http://a:b@/x" http://127.0.0.1
curl: (5) Couldn't resolve proxy name
==5048==
==5048== HEAP SUMMARY:
==5048== in use at exit: 532 bytes in 12 blocks
==5048== total heap usage: 5,288 allocs, 5,276 frees, 445,271 bytes allocated
==5048==
==5048== 2 bytes in 1 blocks are definitely lost in loss record 1 of 12
==5048== at 0x4C2DB8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==5048== by 0x4E6CB79: parse_login_details (url.c:5614)
==5048== by 0x4E6BA82: parse_proxy (url.c:5091)
==5048== by 0x4E6C46D: create_conn_helper_init_proxy (url.c:5346)
==5048== by 0x4E6EA18: create_conn (url.c:6498)
==5048== by 0x4E6F9B4: Curl_connect (url.c:6967)
==5048== by 0x4E86D05: multi_runsingle (multi.c:1436)
==5048== by 0x4E88432: curl_multi_perform (multi.c:2160)
==5048== by 0x4E7C515: easy_transfer (easy.c:708)
==5048== by 0x4E7C74A: easy_perform (easy.c:794)
==5048== by 0x4E7C7B1: curl_easy_perform (easy.c:813)
==5048== by 0x414025: operate_do (tool_operate.c:1563)
==5048==
==5048== 2 bytes in 1 blocks are definitely lost in loss record 2 of 12
==5048== at 0x4C2DB8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==5048== by 0x4E6CBB6: parse_login_details (url.c:5621)
==5048== by 0x4E6BA82: parse_proxy (url.c:5091)
==5048== by 0x4E6C46D: create_conn_helper_init_proxy (url.c:5346)
==5048== by 0x4E6EA18: create_conn (url.c:6498)
==5048== by 0x4E6F9B4: Curl_connect (url.c:6967)
==5048== by 0x4E86D05: multi_runsingle (multi.c:1436)
==5048== by 0x4E88432: curl_multi_perform (multi.c:2160)
==5048== by 0x4E7C515: easy_transfer (easy.c:708)
==5048== by 0x4E7C74A: easy_perform (easy.c:794)
==5048== by 0x4E7C7B1: curl_easy_perform (easy.c:813)
==5048== by 0x414025: operate_do (tool_operate.c:1563)
Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=2984
Credit to OSS Fuzz for discovery
Closes#1761
... to make all libcurl internals able to use the same data types for
the struct members. The timeval struct differs subtly on several
platforms so it makes it cumbersome to use everywhere.
Ref: #1652Closes#1693
Add a new type of callback to Curl_handler which performs checks on
the connection. Alter RTSP so that it uses this callback to do its
own check on connection health.
If libcurl was built with GSS-API support, it unconditionally advertised
GSS-API authentication while connecting to a SOCKS5 proxy. This caused
problems in environments with improperly configured Kerberos: a stock
libcurl failed to connect, despite libcurl built without GSS-API
connected fine using username and password.
This commit introduces the CURLOPT_SOCKS5_AUTH option to control the
allowed methods for SOCKS5 authentication at run time.
Note that a new option was preferred over reusing CURLOPT_PROXYAUTH
for compatibility reasons because the set of authentication methods
allowed by default was different for HTTP and SOCKS5 proxies.
Bug: https://curl.haxx.se/mail/lib-2017-01/0005.html
Closes https://github.com/curl/curl/pull/1454
... to enable sending "OPTIONS *" which wasn't possible previously.
This option currently only works for HTTP.
Added test cases 1298 + 1299 to verify
Fixes#1280Closes#1462
... all other non-HTTP protocol schemes are now defaulting to "tunnel
trough" mode if a HTTP proxy is specified. In reality there are no HTTP
proxies out there that allow those other schemes.
Assisted-by: Ray Satiro, Michael Kaufmann
Closes#1505
mk-lib1521.pl generates a test program (lib1521.c) that calls
curl_easy_setopt() for every known option with a few typical values to
make sure they work (ignoring the return codes).
Some small changes were necessary to avoid asserts and NULL accesses
when doing this.
The perl script needs to be manually rerun when we add new options.
Closes#1543
Some code (e.g. Curl_fillreadbuffer) assumes that this buffer is not
exceedingly tiny and will break if it is. This same check is already
done at run time in the CURLOPT_BUFFERSIZE option.
The function IsPipeliningPossible() would return TRUE if either
pipelining OR HTTP/2 were possible on a connection, which would lead to
it returning TRUE even for POSTs on HTTP/1 connections.
It now returns a bitmask so that the caller can differentiate which kind
the connection allows.
Fixes#1481Closes#1483
Reported-by: stootill at github
This fixes the following clang warnings:
macro is not used [-Wunused-macros]
will never be executed [-Wunreachable-code]
Closes https://github.com/curl/curl/pull/1448
get_protocol_family() is not defined static even though there is a
static local forward declaration. Let's simply make the definition match
it's declaration.
Bug: https://curl.haxx.se/mail/lib-2017-04/0127.html
The data->req.uploadbuf struct member served no good purpose, instead we
use ->state.uploadbuffer directly. It makes it clearer in the code which
buffer that's being used.
Removed the 'SingleRequest *' argument from the readwrite_upload() proto
as it can be derived from the Curl_easy struct. Also made the code in
the readwrite_upload() function use the 'k->' shortcut to all references
to struct fields in 'data->req', which previously was made with a mix of
both.
- Don't free postponed data on a connection that will be reused since
doing so can cause data loss when pipelining.
Only Windows builds are affected by this.
Closes https://github.com/curl/curl/issues/1380
When using basic-auth, connections and proxy connections
can be re-used with different Authorization headers since
it does not authenticate the connection (like NTLM does).
For instance, the below command should re-use the proxy
connection, but it currently doesn't:
curl -v -U alice:a -x http://localhost:8181http://localhost/
--next -U bob:b -x http://localhost:8181http://localhost/
This is a regression since refactoring of ConnectionExists()
as part of: cb4e2be7c6
Fix the above by removing the username and password compare
when re-using proxy connection at proxy_info_matches().
However, this fix brings back another bug would make curl
to re-print the old proxy-authorization header of previous
proxy basic-auth connection because it wasn't cleared.
For instance, in the below command the second request should
fail if the proxy requires authentication, but would succeed
after the above fix (and before aforementioned commit):
curl -v -U alice:a -x http://localhost:8181http://localhost/
--next -x http://localhost:8181http://localhost/
Fix this by clearing conn->allocptr.proxyuserpwd after use
unconditionally, same as we do for conn->allocptr.userpwd.
Also fix test 540 to not expect digest auth header to be
resent when connection is reused.
Signed-off-by: Isaac Boukris <iboukris@gmail.com>
Closes https://github.com/curl/curl/pull/1350
- Add new option CURLOPT_SUPPRESS_CONNECT_HEADERS to allow suppressing
proxy CONNECT response headers from the user callback functions
CURLOPT_HEADERFUNCTION and CURLOPT_WRITEFUNCTION.
- Add new tool option --suppress-connect-headers to expose
CURLOPT_SUPPRESS_CONNECT_HEADERS and allow suppressing proxy CONNECT
response headers from --dump-header and --include.
Assisted-by: Jay Satiro
Assisted-by: CarloCannas@users.noreply.github.com
Closes https://github.com/curl/curl/pull/783
This commit introduces the CURL_SSLVERSION_MAX_* constants as well as
the --tls-max option of the curl tool.
Closes https://github.com/curl/curl/pull/1166
... because it causes confusion with users. Example URLs:
"http://[127.0.0.1]:11211:80" which a lot of languages' URL parsers will
parse and claim uses port number 80, while libcurl would use port number
11211.
"http://user@example.com:80@localhost" which by the WHATWG URL spec will
be treated to contain user name 'user@example.com' but according to
RFC3986 is user name 'user' for the host 'example.com' and then port 80
is followed by "@localhost"
Both these formats are now rejected, and verified so in test 1260.
Reported-by: Orange Tsai
If the compile-time CURL_CA_BUNDLE location is defined use it as the
default value for the proxy CA bundle location, which is the same as
what we already do for the regular CA bundle location.
Ref: https://github.com/curl/curl/pull/1257
