The --create-file-mode code logic accepted the value but never actually
passed it on to libcurl!
Follow-up to a7696c7343 (shipped in 7.75.0)
Reported-by: Johannes Lesr
Fixes#6657Closes#6666
openssl: use SSL_get_version to get connection protocol
Replace our bespoke get_ssl_version_txt in favor of SSL_get_version.
We can get rid of few lines of code, since SSL_get_version achieve
the exact same thing
Closes#6665
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Signed-off-by: Jean-Philippe Menil <jpmenil@gmail.com>
Commit e06fa7462a removed support for libgcrypt leaving only
support for nettle which has been the default crypto library in
GnuTLS for a long time. There were however a few conditionals on
USE_GNUTLS_NETTLE which cause compilation errors in the metalink
code (as it used the gcrypt fallback instead as a result). See the
below autobuild for an example of the error:
https://curl.se/dev/log.cgi?id=20210225123226-30704#prob1
This removes all uses of USE_GNUTLS_NETTLE and also removes the
gcrypt support from the metalink code while at it.
Closes#6656
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Previously only a single -b cookie parameter was supported with the last
one winning. This adds support for supplying multiple -b params to have
them serialized semicolon separated. Both cookiefiles and cookies can be
entered multiple times.
Closes#6649
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Align header with project style of using named parameters in the
function prototypes to aid readability and self-documentation.
Closes#6653
Reviewed-by: Daniel Stenberg <daniel@haxx.se>
Previously, configure would look for hyper by default, and use it if
found; otherwise it would not use hyper, and not error.
Now, configure will not look for hyper unless --with-hyper is passed. If
configure looks for hyper and fails, it will error.
Also, add -ld -lpthread -lm to Hyper's libs. I think they are required.
Closes#6598
... since the state machine might go to RATELIMITING and then back to
PERFORMING doing once-per-transfer inits in that function is wrong and
it caused problems with receiving chunked HTTP and it set the
PRETRANSFER time much too often...
Regression from b68dc34af3 (shipped in 7.75.0)
Reported-by: Amaury Denoyelle
Fixes#6640Closes#6641
... the link would only work if browsed on GitHub, while this link now
takes the user to the website instead and thus should work on either.
Reported-by: David Demelier
(Unless 32-bit `time_t` is selected manually via the `_USE_32BIT_TIME_T`
mingw macro.)
Previously, 64-bit `time_t` was enabled on VS2005 and newer only, and
32-bit `time_t` was used on all other Windows builds.
Assisted-by: Jay Satiro
Closes#6636
- Use atexit to register a dbg cleanup function that closes the logfile.
LeakSantizier (LSAN) calls _exit() instead of exit() when a leak is
detected on exit so the logfile must be closed explicitly or data could
be lost. Though _exit() does not call atexit handlers such as this,
LSAN's call to _exit() comes after the atexit handlers are called.
Prior to this change the logfile was not explicitly closed so it was
possible that if LSAN detected a leak and called _exit (which does
not flush or close files like exit) then the logfile could be missing
data. That could then cause curl's memanalyze to report false leaks
(eg a malloc was recorded to the logfile but the corresponding free was
discarded from the buffer instead of written to the logfile, then
memanalyze reports that as a leak).
Ref: https://github.com/google/sanitizers/issues/1374
Bug: https://github.com/curl/curl/pull/6591#issuecomment-780396541
Closes https://github.com/curl/curl/pull/6620
- Change the Windows char <-> UTF-8 conversion functions to return an
allocated copy of the passed in string instead of the original.
Prior to this change the curlx_convert_ functions would, as what I
assume was an optimization, not make a copy of the passed in string if
no conversion was required. No conversion is required in non-UNICODE
Windows builds since our tchar strings are type char and remain in
whatever the passed in encoding is, which is assumed to be UTF-8 but may
be other encoding.
In contrast the UNICODE Windows builds require conversion
(wchar <-> char) and do return a copy. That inconsistency could lead to
programming errors where the developer expects a copy, and does not
realize that won't happen in all cases.
Closes https://github.com/curl/curl/pull/6602
- add CURLINFO_REFERER libcurl option
- add --write-out '%{referer}' command-line option
- extend --xattr command-line option to fill user.xdg.referrer.url extended
attribute with the referrer (if there was any)
Closes#6591
... with the help of Curl_resolver_error() which now is moved from
asyn-thead.c and is provided globally for this purpose.
Follow-up to 35ca04ce1b
Makes test 1188 work for c-ares builds
Closes#6626
An updated freebsd-12-2 image was added a few months ago, and this
older one is consistently failing to go past `pkginstall`:
```
Newer FreeBSD version for package py37-mlt:
To ignore this error set IGNORE_OSVERSION=yes
- package: 1202000
- running kernel: 1201000
Ignore the mismatch and continue? [Y/n]: pkg: repository FreeBSD contains packages for wrong OS version: FreeBSD:12:amd64
```
FreeBSD thread suggests that 12.1 is EOL, and best to avoid.
Ref: https://forums.freebsd.org/threads/78856/
Reviewed-by: Daniel Stenberg
Closes#6622
Using the %NOLISTENPORT to trigger a connection failure is somewhat
"risky" (since it isn't guaranteed to not be listened to) and caused
occasional CI problems. This fix changes the infused error to be a more
reliable one but still verifies the --write-out functionality properly -
which is the purpose of this test.
Reported-by: Jay Satiro
Fixes#6621Closes#6623
This caused a memory leak as the session id cache entry was still
erroneously stored with a NULL sessionid and that would later be treated
as not needed to get freed.
Reported-by: Gisle Vanem
Fixes#6616Closes#6617
While working on documenting the states it dawned on me that step one is
to use more descriptive names on the states. This also changes prefix on
the states to make them shorter in the source.
State names NOT ending with *ing are transitional ones.
Closes#6612
Previously an empty 'Referer:' header was added to the HTTP request when
passing `--referer ';auto'` or `--referer ''` on the command-line. This
patch makes `--referer` work like `--header 'Referer:'` and will only add
the header if it has a non-zero length value.
Reviewed-by: Jay Satiro
Closes#6610
The Curl_easy pointer struct entry in connectdata is now gone. Just
before commit 215db086e0 landed on January 8, 2021 there were 919
references to conn->data.
Closes#6608
- Share the shared object from the user's easy handle with the DOH
handles.
Prior to this change if the user had set a shared object with shared
cached DNS (CURL_LOCK_DATA_DNS) for their easy handle then that wasn't
used by any associated DOH handles, since they used the multi's default
hostcache.
This change means all the handles now use the same hostcache, which is
either the shared hostcache from the user created shared object if it
exists or if not then the multi's default hostcache.
Reported-by: Manuj Bhatia
Fixes https://github.com/curl/curl/issues/6589
Closes https://github.com/curl/curl/pull/6607
... but instead use a private alternative that points to the "driving
transfer" from the connection. We set the "user data" associated with
the connection to be the connectdata struct, but when we drive transfers
the code still needs to know the pointer to the transfer. We can change
the user data to become the Curl_easy handle, but with older nghttp2
version we cannot dynamically update that pointer properly when
different transfers are used over the same connection.
Closes#6520
We still make the trace callback function get the connectdata struct
passed to it, since the callback is anchored on the connection.
Repeatedly updating the callback pointer to set 'data' with
SSL_CTX_set_msg_callback_arg() doesn't seem to work, probably because
there might already be messages in the queue with the old pointer.
This code therefore makes sure to set the "logger" handle before using
OpenSSL calls so that the right easy handle gets used for tracing.
Closes#6522
- New libcurl options CURLOPT_DOH_SSL_VERIFYHOST,
CURLOPT_DOH_SSL_VERIFYPEER and CURLOPT_DOH_SSL_VERIFYSTATUS do the
same as their respective counterparts.
- New curl tool options --doh-insecure and --doh-cert-status do the same
as their respective counterparts.
Prior to this change DOH SSL certificate verification settings for
verifyhost and verifypeer were supposed to be inherited respectively
from CURLOPT_SSL_VERIFYHOST and CURLOPT_SSL_VERIFYPEER, but due to a bug
were not. As a result DOH verification remained at the default, ie
enabled, and it was not possible to disable. This commit changes
behavior so that the DOH verification settings are independent and not
inherited.
Ref: https://github.com/curl/curl/pull/4579#issuecomment-554723676
Fixes https://github.com/curl/curl/issues/4578
Closes https://github.com/curl/curl/pull/6597
- Guard some Curl_async accesses with USE_CURL_ASYNC instead of
!CURLRES_SYNCH.
This is another follow-up to 8335c64 which moved the async struct from
the connectdata struct into the Curl_easy struct. A previous follow-up
6cd167a fixed building for sync resolver by guarding some async struct
accesses with !CURLRES_SYNCH. The problem is since DOH (DNS-over-HTTPS)
is available as an asynchronous secondary resolver the async struct may
be used even when libcurl is built for the sync resolver. That means
that CURLRES_SYNCH and USE_CURL_ASYNC may be defined at the same time.
Closes https://github.com/curl/curl/pull/6603
HTTP auth "accidentally" worked before this cleanup since the code would
always overwrite the connection credentials with the credentials from
the most recent transfer and since HTTP auth is typically done first
thing, this has not been an issue. It was still wrong and subject to
possible race conditions or future breakage if the sequence of functions
would change.
The data.set.str[] strings MUST remain unmodified exactly as set by the
user, and the credentials to use internally are instead set/updated in
state.aptr.*
Added test 675 to verify different credentials used in two requests done
over a reused HTTP connection, which previously behaved wrongly.
Fixes#6542Closes#6545
