This fixes the error: 'for' loop initial declaration used outside C99
mode by declaring the loop increment variable in the beginning of the
block instead of inside the for loop.
Fixes#5254
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
In libcurl, CURLINFO_CONDITION_UNMET is used to avoid writing to the
output file if the server did not transfered a file based on time
condition. In the same manner, getting a 304 HTTP response back from the
server, for example after passing a custom If-Match-* header, also
fulfill this condition.
Fixes#5181Closes#5183
Currently, the TLS backend used by vquic/ngtcp2.c is selected at compile
time. Therefore OpenSSL support needs to be explicitly disabled.
Signed-off-by: Daiki Ueno <dueno@redhat.com>
Closes#5148
Previously it rendered the page from files matching "*.d" in the correct
directory, which worked fine in git builds when the files were added but
made it easy to forget adding the files to the dist.
Now, only man page sections listed in DPAGES in Makefile.inc will be
used, thus "forcing" us to update this to get the man page right and get
it included in the dist at the same time.
Ref: #5146Closes#5149
Reported by the new script 'scripts/copyright.pl'. The script has a
regex whitelist for the files that don't need copyright headers.
Removed three (mostly usesless) README files from docs/
Closes#5141
- Implement new option CURLSSLOPT_REVOKE_BEST_EFFORT and
--ssl-revoke-best-effort to allow a "best effort" revocation check.
A best effort revocation check ignores errors that the revocation check
was unable to take place. The reasoning is described in detail below and
discussed further in the PR.
---
When running e.g. with Fiddler, the schannel backend fails with an
unhelpful error message:
Unknown error (0x80092012) - The revocation function was unable
to check revocation for the certificate.
Sadly, many enterprise users who are stuck behind MITM proxies suffer
the very same problem.
This has been discussed in plenty of issues:
https://github.com/curl/curl/issues/3727,
https://github.com/curl/curl/issues/264, for example.
In the latter, a Microsoft Edge developer even made the case that the
common behavior is to ignore issues when a certificate has no recorded
distribution point for revocation lists, or when the server is offline.
This is also known as "best effort" strategy and addresses the Fiddler
issue.
Unfortunately, this strategy was not chosen as the default for schannel
(and is therefore a backend-specific behavior: OpenSSL seems to happily
ignore the offline servers and missing distribution points).
To maintain backward-compatibility, we therefore add a new flag
(`CURLSSLOPT_REVOKE_BEST_EFFORT`) and a new option
(`--ssl-revoke-best-effort`) to select the new behavior.
Due to the many related issues Git for Windows and GitHub Desktop, the
plan is to make this behavior the default in these software packages.
The test 2070 was added to verify this behavior, adapted from 310.
Based-on-work-by: georgeok <giorgos.n.oikonomou@gmail.com>
Co-authored-by: Markus Olsson <j.markus.olsson@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Closes https://github.com/curl/curl/pull/4981
- If an easy handle is owned by a multi different from the one specified
then return CURLM_BAD_EASY_HANDLE.
Prior to this change I assume user error could cause corruption.
Closes https://github.com/curl/curl/pull/5116
This commit adds support to generate JSON via the writeout feature:
-w "%{json}"
It leverages the existing infrastructure as much as possible. Thus,
generating the JSON on STDERR is possible by:
-w "%{stderr}%{json}"
This implements a variant of
https://github.com/curl/curl/wiki/JSON#--write-out-json.
Closes#4870
- Tell the user to call curl_free() to free the pointer returned by
curl_getenv().
Prior to this change the user was directed to call free(), but that
would not work in cases where the library and application use separate C
runtimes and therefore have separate heap memory management.
Closes https://github.com/curl/curl/pull/5016
To simplify our code and since earlier versions lack important function
calls libcurl needs to function correctly.
nghttp2 1.12.0 was relased on June 26, 2016.
Closes#4961
... so that we know we got the whole and not a partial line.
Also, changed the formatting of the fields away from a table again since
the table format requires a github-markdown tool version that we don't
run on the web server atm.
Reported-by: Sunny Bean
Fixes#4946Closes#4947
The alt-svc cache survives a call to curl_easy_reset fine, but the file
name to use for saving the cache was cleared. Now the alt-svc cache has
a copy of the file name to survive handle resets.
Added test 1908 to verify.
Reported-by: Craig Andrews
Fixes#4898Closes#4902
... so that the subsequent logic below can use a single known define to know
when built on Windows (as we don't define WIN32 anymore).
Follow-up to 1adebe7886
Reported-by: crazydef on github
Assisted-by: Marcel Raad
Fixes#4854Closes#4855
- Removed from global_init since it isn't thread-safe. The symbol will
still remain to not break compiles, it just won't have any effect going
forward.
- make the internals NOT loop on EINTR (the opposite from previously).
It only risks returning from the select/poll/wait functions early, and that
should be risk-free.
Closes#4840
- Copy CURLOPT_SSL_OPTIONS.3 description to CURLOPT_PROXY_SSL_OPTIONS.3.
Prior to this change CURLSSLOPT_NO_PARTIALCHAIN was missing from the
CURLOPT_PROXY_SSL_OPTIONS description.
As detailed in DEPRECATE.md, the polarssl support is now removed after
having been disabled for 6 months and nobody has missed it.
The threadlock files used by mbedtls are renamed to an 'mbedtls' prefix
instead of the former 'polarssl' and the common functions that
previously were shared between mbedtls and polarssl and contained the
name 'polarssl' have now all been renamed to instead say 'mbedtls'.
Closes#4825
... and refer to that file from from CURLOPT_COOKIEFILE.3 and
CURLOPT_COOKIELIST.3
Assisted-by: Jay Satiro
Reported-by: bsammon on github
Fixes#4805Closes#4806
- Add new error code CURLE_QUIC_CONNECT_ERROR for QUIC connection
errors.
Prior to this change CURLE_FAILED_INIT was used, but that was not
correct.
Closes https://github.com/curl/curl/pull/4754
For compatibility with `fwrite`, the `CURLOPT_HEADERFUNCTION` callback
is passed two `size_t` parameters which, when multiplied, designate the
number of bytes of data passed in. In practice, CURL always sets the
first parameter (`size`) to 1.
This practice is also enshrined in documentation and cannot be changed
in future. The documentation states that the default callback is
`fwrite`, which means `fwrite` must be a suitable function for this
purpose. However, the documentation also states that the callback must
return the number of *bytes* it successfully handled, whereas ISO C
`fwrite` returns the number of items (each of size `size`) which it
wrote. The only way these numbers can be equal is if `size` is 1.
Since `size` is 1 and can never be changed in future anyway, document
that fact explicitly and let users rely on it.
Reported-by: Frank Gevaerts
Commit-message-by: Christopher Head
Ref: https://github.com/curl/curl/pull/2787
Fixes https://github.com/curl/curl/issues/4758
The comment was confusing and suggested that setting CURLOPT_NOPROGRESS
to 0L would both enable and disable debug output at the same time, like
a Schrödinger's cat of CURLOPTs.
Closes#4745
This commit adds curl_multi_wakeup() which was previously in the TODO
list under the curl_multi_unblock name.
On some platforms and with some configurations this feature might not be
available or can fail, in these cases a new error code
(CURLM_WAKEUP_FAILURE) is returned from curl_multi_wakeup().
Fixes#4418Closes#4608
Starting with this change when doing parallel transfers, without this
option set, curl will prefer to create new transfers multiplexed on an
existing connection rather than creating a brand new one.
--parallel-immediate can be set to tell curl to prefer to use new
connections rather than to wait and try to multiplex.
libcurl-wise, this means that curl will set CURLOPT_PIPEWAIT by default
on parallel transfers.
Suggested-by: Tom van der Woerdt
Closes#4500
The disable-scan script used in test 1165 is extended to also verify
that the docs cover all used defines and all defines offered by
configure.
Reported-by: SLDiggie on github
Fixes#4545Closes#4587
With the `isdigit` implementation that comes with MSYS2, the argument
is used as an array subscript, resulting in a -Wchar-subscripts
warning. `isdigit`'s behavior is undefined if the argument is negative
and not EOF [0]. As done in lib/curl_ctype.h, cast the `char` variable
to `unsigned char` to avoid that.
[0] https://en.cppreference.com/w/c/string/byte/isdigit
Closes https://github.com/curl/curl/pull/4503
Prior to this change some users did not understand that the "request"
starts when the handle is added to the multi handle, or probably they
did not understand that some of those transfers may be queued and that
time is included in timeout.
Reported-by: Jeroen Ooms
Fixes https://github.com/curl/curl/issues/4486
Closes https://github.com/curl/curl/pull/4489
New option that allows a user to ONLY switch off curl's progress meter
and leave everything else in "talkative" mode.
Reported-by: Piotr Komborski
Fixes#4422Closes#4470
... just say that limiting operations risk aborting otherwise fine
working transfers. If that means seconds, minutes or hours, we leave to
the user.
Reported-by: Martin Gartner
Closes#4469
CURLU_NO_AUTHORITY is intended for use with unknown schemes (i.e. not
"file:///") to override cURL's default demand that an authority exists.
Closes#4349
Double-underscored or underscore plus uppercase letter at least.
... as they're claimed to be reserved.
Reported-by: patnyb on github
Fixes#4254Closes#4255
For a long time (since 7.28.1) we've returned error when setting the
value to 1 to make applications notice that we stopped supported the old
behavior for 1. Starting now, we treat 1 and 2 exactly the same.
Closes#4241
RFC 7838 section 5:
When using an alternative service, clients SHOULD include an Alt-Used
header field in all requests.
Removed CURLALTSVC_ALTUSED again (feature is still EXPERIMENTAL thus
this is deemed ok).
You can disable sending this header just like you disable any other HTTP
header in libcurl.
Closes#4199
Even though it cannot fall-back to a lower HTTP version automatically. The
safer way to upgrade remains via CURLOPT_ALTSVC.
CURLOPT_H3 no longer has any bits that do anything and might be removed
before we remove the experimental label.
Updated the curl tool accordingly to use "--http3".
Closes#4197
This is only the libcurl part that provides the information. There's no
user of the parsed value. This change includes three new tests for the
parser.
Ref: #3794
Added the ability for the calling program to specify the authorisation
identity (authzid), the identity to act as, in addition to the
authentication identity (authcid) and password when using SASL PLAIN
authentication.
Fixes#3653Closes#3790
NOTE: This commit was cherry-picked and is part of a series of commits
that added the authzid feature for upcoming 7.66.0. The series was
temporarily reverted in db8ec1f so that it would not ship in a 7.65.x
patch release.
Closes https://github.com/curl/curl/pull/4186
