In order to make curl_multi_timeout() return suitable "sleep" times even
when there's no socket to wait for while the name is being resolved in a
helper thread.
It will increases the timeouts as time passes.
Closes#2419
If a connection has received a GOAWAY frame while not being used, the
function now reads frames off the connection before trying to reuse it
to avoid reusing connections the server has told us not to use.
Reported-by: Alex Baines
Fixes#1967Closes#2402
Currently CMake cannot detect Brotli support. This adds detection of the
libraries and associated header files. It also adds this to the
generated config.
Closes#2392
This patch adds CURLOPT_DNS_SHUFFLE_ADDRESSES to explicitly request
shuffling of IP addresses returned for a hostname when there is more
than one. This is useful when the application knows that a round robin
approach is appropriate and is willing to accept the consequences of
potentially discarding some preference order returned by the system's
implementation.
Closes#1694
When a transfer is requested to get done and it is put in the pending
queue when limited by number of connections, total or per-host, libcurl
would previously very aggressively retry *ALL* pending transfers to get
them transferring. That was very time consuming.
By reducing the aggressiveness in how pending are being retried, we
waste MUCH less time on putting transfers back into pending again.
Some test cases got a factor 30(!) speed improvement with this change.
Reported-by: Cyril B
Fixes#2369Closes#2383
Especially unpausing a transfer might have to move the socket back to the
"currently used sockets" hash to get monitored. Otherwise it would never get
any more data and get stuck. Easily triggered with pausing using the
multi_socket API.
Reported-by: Philip Prindeville
Bug: https://curl.haxx.se/mail/lib-2018-03/0048.htmlFixes#2393Closes#2391
Due to very frequent updates of the rate limit "window", it could
attempt to rate limit within the same milliseconds and that then made
the calculations wrong, leading to it not behaving correctly on very
fast transfers.
This new logic updates the rate limit "window" to be no shorter than the
last three seconds and only updating the timestamps for this when
switching between the states TOOFAST/PERFORM.
Reported-by: 刘佩东
Fixes#2386Closes#2388
Refuse to operate when given path components featuring byte values lower
than 32.
Previously, inserting a %00 sequence early in the directory part when
using the 'singlecwd' ftp method could make curl write a zero byte
outside of the allocated buffer.
Test case 340 verifies.
CVE-2018-1000120
Reported-by: Duy Phan Thanh
Bug: https://curl.haxx.se/docs/adv_2018-9cd6.html
gss_seal/gss_unseal have been deprecated in favor of
gss_wrap/gss_unwrap with GSS-API v2 from January 1997 [1]. The first
version of "The Kerberos Version 5 GSS-API Mechanism" [2] from June
1996 already says "GSS_Wrap() (formerly GSS_Seal())" and
"GSS_Unwrap() (formerly GSS_Unseal())".
Use the nondeprecated functions to avoid deprecation warnings.
[1] https://tools.ietf.org/html/rfc2078
[2] https://tools.ietf.org/html/rfc1964
Closes https://github.com/curl/curl/pull/2356
On MinGW and Cygwin, GCC and clang have been complaining about macro
redefinitions since 4272a0b0fc. Fix this
by undefining the macros before redefining them as suggested in
https://github.com/curl/curl/pull/2269.
Suggested-by: Daniel Stenberg
When targeting x64, MinGW-w64 complains about conversions between
32-bit long and 64-bit pointers. Fix this by reusing the
GNUTLS_POINTER_TO_SOCKET_CAST / GNUTLS_SOCKET_TO_POINTER_CAST logic
from gtls.c, moving it to warnless.h as CURLX_POINTER_TO_INTEGER_CAST /
CURLX_INTEGER_TO_POINTER_CAST.
Closes https://github.com/curl/curl/pull/2341
- Add new option CURLOPT_RESOLVER_START_FUNCTION to set a callback that
will be called every time before a new resolve request is started
(ie before a host is resolved) with a pointer to backend-specific
resolver data. Currently this is only useful for ares.
- Add new option CURLOPT_RESOLVER_START_DATA to set a user pointer to
pass to the resolver start callback.
Closes https://github.com/curl/curl/pull/2311
- In keeping with the naming of our other connect timeout options rename
CURLOPT_HAPPY_EYEBALLS_TIMEOUT to CURLOPT_HAPPY_EYEBALLS_TIMEOUT_MS.
This change adds the _MS suffix since the option expects milliseconds.
This is more intuitive for our users since other connect timeout options
that expect milliseconds use _MS such as CURLOPT_TIMEOUT_MS,
CURLOPT_CONNECTTIMEOUT_MS, CURLOPT_ACCEPTTIMEOUT_MS.
The tool option already uses an -ms suffix, --happy-eyeballs-timeout-ms.
Follow-up to 2427d94 which added the lib and tool option yesterday.
Ref: https://github.com/curl/curl/pull/2260
- Add new option CURLOPT_HAPPY_EYEBALLS_TIMEOUT to set libcurl's happy
eyeball timeout value.
- Add new optval macro CURL_HET_DEFAULT to represent the default happy
eyeballs timeout value (currently 200 ms).
- Add new tool option --happy-eyeballs-timeout-ms to expose
CURLOPT_HAPPY_EYEBALLS_TIMEOUT. The -ms suffix is used because the
other -timeout options in the tool expect seconds not milliseconds.
Closes https://github.com/curl/curl/pull/2260
This enables users to preresolve but still take advantage of happy
eyeballs and trying multiple addresses if some are not connecting.
Ref: https://github.com/curl/curl/pull/2260
Previously, it would only check for max length if the existing alloc
buffer was to small to fit it, which often would make the header still
get used.
Reported-by: Guido Berhoerster
Bug: https://curl.haxx.se/mail/lib-2018-02/0056.htmlCloses#2315
The list of state names (used in debug builds) was out of sync in
relation to the list of states (used in all builds).
I now added an assert to make sure the sizes of the two lists match, to
aid in detecting this mistake better in the future.
Regression since c92d2e14cf, shipped in 7.58.0.
Reported-by: Somnath Kundu
Fixes#2312Closes#2313
RFC 5321 4.1.1.4 specifies the CRLF terminating the DATA command
should be taken into account when chasing the <CRLF>.<CRLF> end marker.
Thus a leading dot character in data is also subject to escaping.
Tests 911 and test server are adapted to this situation.
New tests 951 and 952 check proper handling of initial dot in data.
Closes#2304
Some servers return a "content-encoding" header with a non-standard
"none" value.
Add "none" as an alias to "identity" as a work-around, to avoid
unrecognised content encoding type errors.
Signed-off-by: Mohammad AlSaleh <CE.Mohammad.AlSaleh@gmail.com>
Closes https://github.com/curl/curl/pull/2298
Windows 10.0.17061 SDK introduces support for Unix Domain Sockets.
Added the necessary include file to curl_addrinfo.c.
Note: The SDK (which is considered beta) has to be installed, VS 2017
project file has to be re-targeted for Windows 10.0.17061 and #define
enabled in config-win32.h.
When peer verification is disabled, calling
SSL_CTX_load_verify_locations is not necessary. Only call it when
verification is enabled to save resources and increase performance.
Closes#2290
Reduce code duplication by making Curl_mime_contenttype available and
used by the formdata function. This also makes the formdata function
recognize a set of more file extensions by default.
PR #2280 brought this to my attention.
Closes#2282
Whenever an expected pattern syntax rule cannot be matched, the
character starting the rule loses its special meaning and the parsing
is resumed:
- backslash at the end of pattern string matches itself.
- Error in [:keyword:] results in set containing :\[dekorwy.
Unit test 1307 updated for this new situation.
Closes#2273
... since the libc provided one are locale dependent in a way we don't
want. Also, the "native" isalnum() (for example) works differently on
different platforms which caused test 1307 failures on macos only.
Closes#2269
Make curl_getdate() handle dates before 1970 as well (returning negative
values).
Make test 517 test dates for 64 bit time_t.
This fixes bug (3) mentioned in #2238Closes#2250
... unless CURLOPT_UNRESTRICTED_AUTH is set to allow them. This matches how
curl already handles Authorization headers created internally.
Note: this changes behavior slightly, for the sake of reducing mistakes.
Added test 317 and 318 to verify.
Reported-by: Craig de Stigter
Bug: https://curl.haxx.se/docs/adv_2018-b3bf.html
In case an identity didn't match[0], the state machine would fail in
state SSH_AUTH_AGENT instead of progressing to the next identity in
ssh-agent. As a result, ssh-agent authentication only worked if the
identity required happened to be the first added to ssh-agent.
This was introduced as part of commit c4eb10e2f0, which
stated that the "else" statement was required to prevent getting stuck
in state SSH_AUTH_AGENT. Given the state machine's logic and libssh2's
interface I couldn't see how this could happen or reproduce it and I
also couldn't find a more detailed description of the problem which
would explain a test case to reproduce the problem this was supposed to
fix.
[0] libssh2_agent_userauth returning LIBSSH2_ERROR_AUTHENTICATION_FAILED
Closes#2248
Follow-up to 84fcaa2e7. libressl does not have the API even if it says it is
late OpenSSL version...
Fixes#2246Closes#2247
Reported-by: jungle-boogie on github
1. don't use "ULL" suffix since unsupported in older MSVC
2. use curl_off_t instead of custom long long ifdefs
3. make get_posix_time() not do unaligned data access
Fixes#2211Closes#2240
Reported-by: Chester Liu
A mime tree attached to an easy handle using CURLOPT_MIMEPOST is
strongly bound to the handle: there is a pointer to the easy handle in
each item of the mime tree and following the parent pointer list
of mime items ends in a dummy part stored within the handle.
Because of this binding, a mime tree cannot be shared between different
easy handles, thus it needs to be cloned upon easy handle duplication.
There is no way for the caller to get the duplicated mime tree
handle: it is then set to be automatically destroyed upon freeing the
new easy handle.
New test 654 checks proper mime structure duplication/release.
Add a warning note in curl_mime_data_cb() documentation about sharing
user data between duplicated handles.
Closes#2235
Prior to this change the stored byte count of each trailer was
miscalculated and 1 less than required. It appears any trailer
after the first that was passed to Curl_client_write would be truncated
or corrupted as well as the size. Potentially the size of some
subsequent trailer could be erroneously extracted from the contents of
that trailer, and since that size is used by client write an
out-of-bounds read could occur and cause a crash or be otherwise
processed by client write.
The bug appears to have been born in 0761a51 (precedes 7.49.0).
Closes https://github.com/curl/curl/pull/2231
Decoding loop implementation did not concern the case when all
received data is consumed by Brotli decoder and the size of decoded
data internally hold by Brotli decoder is greater than CURL_MAX_WRITE_SIZE.
For content with unencoded length greater than CURL_MAX_WRITE_SIZE this
can result in the loss of data at the end of content.
Closes#2194
Move curl_mime_initpart() and curl_mime_cleanpart() calls to lower-level
functions dealing with UserDefined structure contents.
This avoids memory leakages on curl-generated part mime headers.
New test 2073 checks this using the cli tool --next option: it
triggers a valgrind error if bug is present.
Bug: https://curl.haxx.se/mail/lib-2017-12/0060.html
Reported-by: Martin Galvan
- When zlib version is < 1.2.0.4, process gzip trailer before considering
extra data as an error.
- Inflate with Z_BLOCK instead of Z_SYNC_FLUSH to maximize correct data
and minimize corrupt data output.
- Do not try to restart deflate decompression in raw mode if output has
started or if the leading data is not available anymore.
- New test 232 checks inflating raw-deflated content.
Closes#2068
scan-build would warn on a potential access of an uninitialized
buffer. I deem it a false positive and had to add this somewhat ugly
work-around to silence it.
Fixed undefined symbol of getenv() which does not exist when compiling
for Windows 10 App (CURL_WINDOWS_APP). Replaced getenv() with
curl_getenv() which is aware of getenv() absence when CURL_WINDOWS_APP
is defined.
Closes#2171
Prune the DNS cache immediately after the dns entry is unlocked in
multi_done. Timed out entries will then get discarded in a more orderly
fashion.
Test506 is updated
Reported-by: Oleg Pudeyev
Fixes#2169Closes#2170
Prior to this change SSLKEYLOGFILE used line buffering on WIN32 just
like it does for other platforms. However, the Windows CRT does not
actually support line buffering (_IOLBF) and will use full buffering
(_IOFBF) instead. We can't use full buffering because multiple processes
may be writing to the file and that could lead to corruption, and since
full buffering is the only buffering available this commit disables
buffering for Windows SSLKEYLOGFILE entirely (_IONBF).
Ref: https://github.com/curl/curl/pull/1346#issuecomment-350530901
These are OS/2-specific things added to the code in the year 2000. They
were always ugly. If there's any user left, they still don't need it
done this way.
Closes#2166
- Allow proxy_ssl to be checked for pending data even when connssl does
not yet have an SSL handle.
This change is for posterity. Currently there doesn't seem to be a code
path that will cause a pending data check when proxyssl could have
pending data and the connssl handle doesn't yet exist [1].
[1]: Recall that an https proxy connection starts out in connssl but if
the destination is also https then the proxy SSL backend data is moved
from connssl to proxyssl, which means connssl handle is temporarily
empty until an SSL handle for the destination can be created.
Ref: https://github.com/curl/curl/commit/f4a6238#commitcomment-24396542
Closes https://github.com/curl/curl/pull/1916
Connections that are used for HTTP/1.1 Pipelining or HTTP/2 multiplexing
only get additional transfers added to them if the existing connection
is held by the same multi or easy handle. libcurl does not support doing
HTTP/2 streams in different threads using a shared connection.
Closes#2152
If the lock is released before the dealings with the bundle is over, it may
have changed by another thread in the mean time.
Fixes#2132Fixes#2151Closes#2139
For pop3/imap/smtp, added test 891 to somewhat verify the pop3
case.
For this, I enhanced the pingpong test server to be able to send back
responses with LF-only instead of always using CRLF.
Closes#2150
Figured out while reviewing code in the libssh backend. The pointer was
checked for NULL after having been dereferenced, so we know it would
always equal true or it would've crashed.
Pointed-out-by: Nikos Mavrogiannopoulos
Bug #2143Closes#2148
The previous code was incorrectly following the libssh2 error detection
for libssh2_sftp_statvfs, which is not correct for libssh's sftp_statvfs.
Fixes#2142
Signed-off-by: Nikos Mavrogiannopoulos <nmav@gnutls.org>
The SFTP back-end supports asynchronous reading only, limited
to 32-bit file length. Writing is synchronous with no other
limitations.
This also brings keyboard-interactive authentication.
Signed-off-by: Nikos Mavrogiannopoulos <nmav@gnutls.org>
That also updates tests to expect the right error code
libssh2 back-end returns CURLE_SSH error if the remote file
is not found. Expect instead CURLE_REMOTE_FILE_NOT_FOUND
which is sent by the libssh backend.
Signed-off-by: Nikos Mavrogiannopoulos <nmav@redhat.com>
libssh is an alternative library to libssh2.
https://www.libssh.org/
That patch set also introduces support for ECDSA
ed25519 keys, as well as gssapi authentication.
Signed-off-by: Nikos Mavrogiannopoulos <nmav@redhat.com>
Absent any 'symbol map' or script to limit what gets exported, static
linking of libraries previously resulted in a libcurl with curl's and
those other symbols being (re-)exported.
This did not happen if 'versioned symbols' were enabled (which is not
the default) because then a version script is employed.
This limits exports to everything starting in 'curl_*'., which is
what "libcurl.vers" exports.
This avoids strange side-effects such as with mixing methods
from system libraries and those erroneously offered by libcurl.
Closes#2127
Originally, my idea was to allocate the two structures (or more
precisely, the connectdata structure and the four SSL backend-specific
strucutres required for ssl[0..1] and proxy_ssl[0..1]) in one go, so
that they all could be free()d together.
However, getting the alignment right is tricky. Too tricky.
So let's just bite the bullet and allocate the SSL backend-specific
data separately.
As a consequence, we now have to be very careful to release the memory
allocated for the SSL backend-specific data whenever we release any
connectdata.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Closes#2119
commit d3ab7c5a21 broke the boringssl build since it doesn't have
RSA_flags(), so we disable that code block for boringssl builds.
Reported-by: W. Mark Kubacki
Fixes#2117
This bit is no longer used. It is not clear what it meant for users to
"init the TLS" in a world with different TLS backends and since the
introduction of multissl, libcurl didn't properly work if inited without
this bit set.
Not a single user responded to the call for users of it:
https://curl.haxx.se/mail/lib-2017-11/0072.html
Reported-by: Evgeny Grin
Assisted-by: Jay Satiro
Fixes#2089Fixes#2083Closes#2107
- Align the array of ssl_backend_data on a max 32 byte boundary.
8 is likely to be ok but I went with 32 for posterity should one of
the ssl_backend_data structs change to contain a larger sized variable
in the future.
Prior to this change (since dev 70f1db3, release 7.56) the connectdata
structure was undersized by 4 bytes in 32-bit builds with ssl enabled
because long long * was mistakenly used for alignment instead of
long long, with the intention being an 8 byte boundary. Also long long
may not be an available type.
The undersized connectdata could lead to oob read/write past the end in
what was expected to be the last 4 bytes of the connection's secondary
socket https proxy ssl_backend_data struct (the secondary socket in a
connection is used by ftp, others?).
Closes https://github.com/curl/curl/issues/2093
CVE-2017-8818
Bug: https://curl.haxx.se/docs/adv_2017-af0a.html
With this check present, scan-build warns that we might dereference this
point in other places where it isn't first checked for NULL. Thus, if it
*can* be NULL we have a problem on a few places. However, this pointer
should not be possible to be NULL here so I remove the check and thus
also three different scan-build warnings.
Closes#2111
* LOTS of comment updates
* explicit error for SMB shares (e.g. "file:////share/path/file")
* more strict handling of authority (i.e. "//localhost/")
* now accepts dodgy old "C:|" drive letters
* more precise handling of drive letters in and out of Windows
(especially recognising both "file:c:/" and "file:/c:/")
Closes#2110
The new API added in Linux 4.11 only requires setting a socket option
before connecting, without the whole sento() machinery.
Notably, this makes it possible to use TFO with SSL connections on Linux
as well, without the need to mess around with OpenSSL (or whatever other
SSL library) internals.
Closes#2056
Host names like "127.0.0.1 moo" would otherwise be accepted by some
getaddrinfo() implementations.
Updated test 1034 and 1035 accordingly.
Fixes#2073Closes#2092
... so that IPv6 addresses can be passed like they can for connect-to
and how they're used in URLs.
Added test 1324 to verify
Reported-by: Alex Malinovich
Fixes#2087Closes#2091
There is a conflict on symbol 'free_func' between openssl/crypto.h and
zlib.h on AIX. This is an attempt to resolve it.
Bug: https://curl.haxx.se/mail/lib-2017-11/0032.html
Reported-By: Michael Felt
The --interface command (CURLOPT_INTERFACE option) already uses
SO_BINDTODEVICE on Linux, but it tries to parse it as an interface or IP
address first, which fails in case the user passes a VRF.
Try to use the socket option immediately and parse it as a fallback
instead. Update the documentation to mention this feature, and that it
requires the binary to be ran by root or with CAP_NET_RAW capabilities
for this to work.
Closes#2024
... previously it would store it already in the happy eyeballs stage
which could lead to the IPv6 bit being set for an IPv4 connection,
leading to curl not wanting to do EPSV=>PASV for FTP transfers.
Closes#2053
- Don't call zlib's inflate() when avail_in stream bytes is 0.
This is a follow up to the parent commit 19e66e5. Prior to that change
libcurl's inflate_stream could call zlib's inflate even when no bytes
were available, causing inflate to return Z_BUF_ERROR, and then
inflate_stream would treat that as a hard error and return
CURLE_BAD_CONTENT_ENCODING.
According to the zlib FAQ, Z_BUF_ERROR is not fatal.
This bug would happen randomly since packet sizes are arbitrary. A test
of 10,000 transfers had 55 fail (ie 0.55%).
Ref: https://zlib.net/zlib_faq.html#faq05
Closes https://github.com/curl/curl/pull/2060
This uses the brotli external library (https://github.com/google/brotli).
Brotli becomes a feature: additional curl_version_info() bit and
structure fields are provided for it and CURLVERSION_NOW bumped.
Tests 314 and 315 check Brotli content unencoding with correct and
erroneous data.
Some tests are updated to accomodate with the now configuration dependent
parameters of the Accept-Encoding header.
This is implemented as an output streaming stack of unencoders, the last
calling the client write procedure.
New test 230 checks this feature.
Bug: https://github.com/curl/curl/pull/2002
Reported-By: Daniel Bankhead
Since CURLSSH_AUTH_ANY (aka CURLSSH_AUTH_DEFAULT) is ~0 an arg value
check on this option is incorrect; we have to accept any value.
Prior to this change since f121575 (7.56.1+) CURLOPT_SSH_AUTH_TYPES
erroneously rejected CURLSSH_AUTH_ANY with CURLE_BAD_FUNCTION_ARGUMENT.
Bug: https://github.com/curl/curl/commit/f121575#commitcomment-25347120
... which is valid according to documentation. Regression since
f121575c0b.
Verified now in test 501.
Reported-by: cbartl on github
Fixes#2038Closes#2039
.. also add same arg value check to CURLOPT_POSTFIELDSIZE_LARGE.
Prior to this change since f121575 (7.56.1+) CURLOPT_POSTFIELDSIZE
erroneously rejected -1 value with CURLE_BAD_FUNCTION_ARGUMENT.
Bug: https://curl.haxx.se/mail/lib-2017-11/0000.html
Reported-by: Andrew Lambert
The config files define curl and libcurl targets as imported targets
CURL::curl and CURL::libcurl. For backward compatibility with CMake-
provided find-module the CURL_INCLUDE_DIRS and CURL_LIBRARIES are
also set.
Closes#1879
returning 'time_t' is problematic when that type is unsigned and we
return values less than zero to signal "already expired", used in
several places in the code.
Closes#2021
If WINAPI_FAMILY is defined, it should be safe to try to include
winapifamily.h to check what the define evaluates to.
This should fix detection of CURL_WINDOWS_APP if building with
_WIN32_WINNT set to 0x0600.
Closes#2025
- When uploading via chunked-encoding don't compare file size to bytes
sent to determine whether the upload has finished.
Chunked-encoding adds its own overhead which why the bytes sent is not
equal to the file size. Prior to this change if a file was uploaded in
chunked-encoding and its size was known it was possible that the upload
could end prematurely without sending the final few chunks. That would
result in a server hang waiting for the remaining data, likely followed
by a disconnect.
The scope of this bug is limited to some arbitrary file sizes which have
not been determined. One size that triggers the bug is 475020.
Bug: https://github.com/curl/curl/issues/2001
Reported-by: moohoorama@users.noreply.github.com
Closes https://github.com/curl/curl/pull/2010
... by using curl_off_t for the typedef if time_t is larger than 4
bytes.
Reported-by: Gisle Vanem
Bug: b9d25f9a6b (co)
mmitcomment-25205058
Closes#2019
... since the 'tv' stood for timeval and this function does not return a
timeval struct anymore.
Also, cleaned up the Curl_timediff*() functions to avoid typecasts and
clean up the descriptive comments.
Closes#2011
... to cater for systems with unsigned time_t variables.
- Renamed the functions to curlx_timediff and Curl_timediff_us.
- Added overflow protection for both of them in either direction for
both 32 bit and 64 bit time_ts
- Reprefixed the curlx_time functions to use Curl_*
Reported-by: Peter Piekarski
Fixes#2004Closes#2005
... that are multiplied by 1000 when stored.
For 32 bit long systems, the max value accepted (2147483 seconds) is >
596 hours which is unlikely to ever be set by a legitimate application -
and previously it didn't work either, it just caused undefined behavior.
Also updated the man pages for these timeout options to mention the
return code.
Closes#1938
Allow to ovverride certain build tools, making it possible to
use LLVM/Clang to build curl. The default behavior is unchanged.
To build with clang (as offered by MSYS2), these settings can
be used:
CURL_CC=clang
CURL_AR=llvm-ar
CURL_RANLIB=llvm-ranlib
Closes https://github.com/curl/curl/pull/1993
Use memset() to initialize a structure to avoid LLVM/Clang warning:
ldap.c:193:39: warning: missing field 'UserLength' initializer [-Wmissing-field-initializers]
Closes https://github.com/curl/curl/pull/1992
Now VERIFYHOST, VERIFYPEER and VERIFYSTATUS options change during active
connection updates the current connection's (i.e.'connectdata'
structure) appropriate ssl_config (and ssl_proxy_config) structures
variables, making these options effective for ongoing connection.
This functionality was available before and was broken by the
following change:
"proxy: Support HTTPS proxy and SOCKS+HTTP(s)"
CommitId: cb4e2be7c6.
Bug: https://github.com/curl/curl/issues/1941
Closes https://github.com/curl/curl/pull/1951
Those were temporary things we'd add and remove for our own convenience
long ago. The last few stayed around for too long as an oversight but
have since been removed. These days we have a running
BORINGSSL_API_VERSION counter which is bumped when we find it
convenient, but 2015-11-19 was quite some time ago, so just check
OPENSSL_IS_BORINGSSL.
Closes#1979
This reverts commit f3e03f6c0a.
Caused memory leaks in the fuzzer, needs to be done differently.
Disable test 1553 for now too, as it causes memory leaks without this
commit!
When imap_done() got called before a connection is setup, it would try
to "finish up" and dereffed a NULL pointer.
Test case 1553 managed to reproduce. I had to actually use a host name
to try to resolve to slow it down, as using the normal local server IP
will make libcurl get a connection in the first curl_multi_perform()
loop and then the bug doesn't trigger.
Fixes#1953
Assisted-by: Max Dymond
... fixes a memory leak with at least IMAP when remove_handle is never
called and the transfer is abruptly just abandoned early.
Test 1552 added to verify
Detected by OSS-fuzz
Assisted-by: Max Dymond
Closes#1954
The source code is now prepared to handle the case when both
Win32 Crypto and OpenSSL/NSS crypto backends are enabled
at the same time, making it now possible to enable `USE_WIN32_CRYPTO`
whenever the targeted Windows version supports it. Since this
matches the minimum Windows version supported by curl
(Windows 2000), enable it unconditionally for the Win32 platform.
This in turn enables SMB (and SMBS) protocol support whenever
Win32 Crypto is available, regardless of what other crypto backends
are enabled.
Ref: https://github.com/curl/curl/pull/1840#issuecomment-325682052
Closes https://github.com/curl/curl/pull/1943
- New `CURL_DLL_SUFFIX` envvar will add a suffix to the generated
libcurl dll name. Useful to add `-x64` to 64-bit builds so that
it can live in the same directory as the 32-bit one. By default
this is empty.
- New `CURL_DLL_A_SUFFIX` envvar to customize the suffix of the
generated import library (implib) for libcurl .dll. It defaults
to `dll`, and it's useful to modify that to `.dll` to have the
standard naming scheme for mingw-built .dlls, i.e. `libcurl.dll.a`.
Closes https://github.com/curl/curl/pull/1942
Compare these settings in Curl_ssl_config_matches():
- verifystatus (CURLOPT_SSL_VERIFYSTATUS)
- random_file (CURLOPT_RANDOM_FILE)
- egdsocket (CURLOPT_EGDSOCKET)
Also copy the setting "verifystatus" in Curl_clone_primary_ssl_config(),
and copy the setting "sessionid" unconditionally.
This means that reusing connections that are secured with a client
certificate is now possible, and the statement "TLS session resumption
is disabled when a client certificate is used" in the old advisory at
https://curl.haxx.se/docs/adv_20170419.html is obsolete.
Reviewed-by: Daniel Stenberg
Closes#1917
... a single double quote could leave the entry path buffer without a zero
terminating byte. CVE-2017-1000254
Test 1152 added to verify.
Reported-by: Max Dymond
Bug: https://curl.haxx.se/docs/adv_20171004.html
When curl and libcurl are built with some protocols disabled, they stop
setting and receiving some options that don't make sense with those
protocols. In particular, when HTTP is disabled many options aren't set
that are used only by HTTP. However, some options that appear to be
HTTP-only are actually used by other protocols as well (some despite
having HTTP in the name) and should be set, but weren't. This change now
causes some of these options to be set and used for more (or for all)
protocols. In particular, this fixes tests 646 through 649 in an
HTTP-disabled build, which use the MIME API in the mail protocols.
The timer should be started after conn->connecttime is set. Otherwise
the timer could expire without this condition being true:
/* should we try another protocol family? */
if(i == 0 && conn->tempaddr[1] == NULL &&
curlx_tvdiff(now, conn->connecttime) >= HAPPY_EYEBALLS_TIMEOUT) {
Ref: #1928
A connection can only be reused if the flags "conn_to_host" and
"conn_to_port" match. Therefore it is not necessary to copy these flags
in reuse_conn().
Closes#1918
.. and include the core NTLM header in all NTLM-related source files.
Follow up to 6f86022. Since then http_ntlm checks NTLM_NEEDS_NSS_INIT
but did not include vtls.h where it was defined.
Closes https://github.com/curl/curl/pull/1911
With the recently introduced MultiSSL support multiple SSL backends
can be compiled into cURL That means that now the order of the SSL
One option would be to use the same SSL backend as was configured
via `curl_global_sslset()`, however, NTLMv2 support would appear
to be available only with some SSL backends. For example, when
eb88d778e (ntlm: Use Windows Crypt API, 2014-12-02) introduced
support for NTLMv1 using Windows' Crypt API, it specifically did
*not* introduce NTLMv2 support using Crypt API at the same time.
So let's select one specific SSL backend for NTLM support when
compiled with multiple SSL backends, using a priority order such
that we support NTLMv2 even if only one compiled-in SSL backend can
be used for that.
Ref: https://github.com/curl/curl/pull/1848
In some cases the RSA key does not support verifying it because it's
located on a smart card, an engine wants to hide it, ...
Check the flags on the key before trying to verify it.
OpenSSL does the same thing internally; see ssl/ssl_rsa.c
Closes#1904
... instead of truncating them.
There's no fixed limit for acceptable cookie names in RFC 6265, but the
entire cookie is said to be less than 4096 bytes (section 6.1). This is
also what browsers seem to implement.
We now allow max 5000 bytes cookie header. Max 4095 bytes length per
cookie name and value. Name + value together may not exceed 4096 bytes.
Added test 1151 to verify
Bug: https://curl.haxx.se/mail/lib-2017-09/0062.html
Reported-by: Kevin Smith
Closes#1894
lib/vtls/openssl.c uses OpenSSL APIs from BUF_MEM and BIO APIs. Include
their headers directly rather than relying on other OpenSSL headers
including things.
Closes https://github.com/curl/curl/pull/1891
If the INTERLEAVEFUNCTION is defined, then use that plus the
INTERLEAVEDATA information when writing RTP. Otherwise, use
WRITEFUNCTION and WRITEDATA.
Fixes#1880Closes#1884
If the default write callback is used and no destination has been set, a
NULL pointer would be passed to fwrite()'s 4th argument.
OSS-fuzz bug https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=3327
(not publicly open yet)
Detected by OSS-fuzz
Closes#1874
