When this define was set, libcurl would check the environment variable
named CURL_CA_BUNDLE at run-time and use that CA cert bundle. This
feature was only defined by the watcom and m32 makefiles and caused
inconsistent behaviours among libcurls built on different platforms.
The curl tool does already feature its own similar logic and the library
does not really need it, and it isn't documented libcurl behavior. So
this change removes it.
Ref: #1538
Prior to this change it was possible for libcurl to be built with both
Windows' native IDN lib (normaliz) and libidn2 enabled. It appears that
doesn't offer any benefit --and could cause a bug-- since libcurl's IDN
handling is written to use either one but not both.
Bug: https://github.com/curl/curl/issues/1441#issuecomment-297689856
Reported-by: Gisle Vanem
In that case, use libcurl's internal MD4 routine. This fixes tests 1013
and 1014 which were failing due to configure assuming NTLM and SMB were
always available whenever mbed TLS was in use (which is now true).
system.h is aimed to replace curlbuild.h at a later point in time when
we feel confident system.h works sufficiently well.
curl/system.h is currently used in parallel with curl/curlbuild.h
curl/system.h determines a data sizes, data types and include file
status based on available preprocessor defines instead of getting
generated at build-time. This, in order to avoid relying on a build-time
generated file that makes it complicated to do 32 and 64 bit bields from
the same installed set of headers.
Test 1541 verifies that system.h comes to the same conclusion that
curlbuild.h offers.
Closes#1373
NTLM support with mbedTLS was added in 497e7c9 but requires that mbedTLS
is built with the MD4 functions available, which it isn't in default
builds. This now adapts if the funtion isn't there and builds libcurl
without NTLM support if so.
Fixes#1004
Use getaddrinfo() to resolve the IPv4 address literal on iOS/Mac OS X.
If the current network interface doesn’t support IPv4, but supports
IPv6, NAT64, and DNS64.
Closes#866Fixes#863
WinSock destroys recv() buffer if send() is failed. As result - server
response may be lost if server sent it while curl is still sending
request. This behavior noticeable on HTTP server short replies if
libcurl use several send() for request (usually for POST request).
To workaround this problem, libcurl use recv() before every send() and
keeps received data in intermediate buffer for further processing.
Fixes: #657Closes: #668
As of https://boringssl-review.googlesource.com/#/c/6980/, almost all of
BoringSSL #ifdefs in cURL should be unnecessary:
- BoringSSL provides no-op stubs for compatibility which replaces most
#ifdefs.
- DES_set_odd_parity has been in BoringSSL for nearly a year now. Remove
the compatibility codepath.
- With a small tweak to an extend_key_56_to_64 call, the NTLM code
builds fine.
- Switch OCSP-related #ifdefs to the more generally useful
OPENSSL_NO_OCSP.
The only #ifdefs which remain are Curl_ossl_version and the #undefs to
work around OpenSSL and wincrypt.h name conflicts. (BoringSSL leaves
that to the consumer. The in-header workaround makes things sensitive to
include order.)
This change errs on the side of removing conditionals despite many of
the restored codepaths being no-ops. (BoringSSL generally adds no-op
compatibility stubs when possible. OPENSSL_VERSION_NUMBER #ifdefs are
bad enough!)
Closes#640
The name of the header guard in lwIP's <lwip/opt.h> has changed from
'__LWIP_OPT_H__' to 'LWIP_HDR_OPT_H' (bug #35874 in May 2015).
Other fixes:
- In curl_setup.h, the problem with an old PSDK doesn't apply if lwIP is
used.
- In memdebug.h, the 'socket' should be undefined first due to lwIP's
lwip_socket() macro.
- In curl_addrinfo.c lwIP's getaddrinfo() + freeaddrinfo() macros need
special handling because they were undef'ed in memdebug.h.
- In select.c we can't use preprocessor conditionals inside select if
MSVC and select is a macro, as it is with lwIP.
http://curl.haxx.se/mail/lib-2015-12/0023.htmlhttp://curl.haxx.se/mail/lib-2015-12/0024.html
- Change fopen calls to use FOPEN_READTEXT instead of "r" or "rt"
- Change fopen calls to use FOPEN_WRITETEXT instead of "w" or "wt"
This change is to explicitly specify when we need to read/write text.
Unfortunately 't' is not part of POSIX fopen so we can't specify it
directly. Instead we now have FOPEN_READTEXT, FOPEN_WRITETEXT.
Prior to this change we had an issue on Windows if an application that
uses libcurl overrides the default file mode to binary. The default file
mode in Windows is normally text mode (translation mode) and that's what
libcurl expects.
Bug: https://github.com/bagder/curl/pull/258#issuecomment-107093055
Reported-by: Orgad Shaneh
SSLeay was the name of the library that was subsequently turned into
OpenSSL many moons ago (1999). curl does not work with the old SSLeay
library since years. This is now reflected by only using USE_OPENSSL in
code that depends on OpenSSL.
USE_NTLM would only be defined if: HTTP support was enabled, NTLM and
cryptography weren't disabled, and either a supporting cryptography
library or Windows SSPI was being compiled against.
This means it was not possible to build libcurl without HTTP support
and use NTLM for other protocols such as IMAP, POP3 and SMTP. Rather
than introduce a new SASL pre-processor definition, removed the HTTP
prerequisite just like USE_SPNEGO and USE_KRB5.
Note: Winbind support still needs to be dependent on CURL_DISABLE_HTTP
as it is only available to HTTP at present.
This bug dates back to August 2011 when I started to add support for
NTLM to SMTP.
Typically the USE_WINDOWS_SSPI definition would not be used when the
CURL_DISABLE_CRYPTO_AUTH define is, however, it is still a valid build
configuration and, as such, the SASL Kerberos V5 (GSSAPI) authentication
data structures and functions would incorrectly be used when they
shouldn't be.
Introduced a new USE_KRB5 definition that takes into account the use of
CURL_DISABLE_CRYPTO_AUTH like USE_SPNEGO and USE_NTLM do.
- Replace CURLAUTH_GSSNEGOTIATE with CURLAUTH_NEGOTIATE
- CURL_VERSION_GSSNEGOTIATE is deprecated which
is served by CURL_VERSION_SSPI, CURL_VERSION_GSSAPI and
CURUL_VERSION_SPNEGO now.
- Remove display of feature 'GSS-Negotiate'
Following commit 0aafd77fa4, replaced the internal usage of
FORMAT_OFF_T and FORMAT_OFF_TU with the external versions that we
expect API programmers to use.
This negates the need for separate definitions which were subtly
different under different platforms/compilers.
This reverts commit 7ed25cc, reinstating commit 8ec2cb5.
As of 18-jul-2013 we still do have code in libcurl that makes use of these
memory functions. Commit 8ec2cb5 comment still applies and is yet valid.
These memory functions are solely used in Windows builds, so all related
code is protected with '#ifdef WIN32' preprocessor conditional compilation
directives.
Specifically, wcsdup() _wcsdup() are used when building a Windows target with
UNICODE and USE_WINDOWS_SSPI preprocessor symbols defined. This is the case
when building a Windows UNICODE target with Windows native SSL/TLS support
enabled.
Realizing that wcsdup() _wcsdup() are used is a bit tricky given that usage
of these is hidden behind _tcsdup() which is MS way of dealing with code
that must tolerate UNICODE and non-UNICODE compilation. Additionally, MS
header files and those compatible from other compilers use this preprocessor
conditional compilation directive in order to select at compilation time
whether 'wide' or 'ansi' MS API functions are used.
Without this code, Windows build targets with Windows native SSL/TLS support
enabled and MemoryTracking support enabled misbehave in tracking memory usage,
regardless of being a UNICODE enabled build or not.
This reverts commit 8ec2cb5544.
We don't have any code anywhere in libcurl (or the curl tool) that use
wcsdup so there's no such memory use to track. It seems to cause mild
problems with the Borland compiler though that we may avoid by reverting
this change again.
Bug: http://curl.haxx.se/mail/lib-2013-05/0070.html
As of 25-mar-2013 wcsdup() _wcsdup() and _tcsdup() are only used in
WIN32 specific code, so tracking of these has not been extended for
other build targets. Without this fix, memory tracking system on
WIN32 builds, when using these functions, would provide misleading
results.
In order to properly extend this support for all targets curl.h
would have to define curl_wcsdup_callback prototype and consequently
wchar_t should be visible before that in curl.h. IOW curl_wchar_t
defined in curlbuild.h and this pulling whatever system header is
required to get wchar_t definition.
Additionally a new curl_global_init_mem() function that also receives
user defined wcsdup() callback would be required.
