Following the addition of informational commands to the SMTP protocol,
the test server is no longer required to return the verified server
information in responses that curl only outputs in verbose mode.
Instead, a similar detection mechanism to that used by FTP, IMAP and
POP3 can now be used.
Following changes to ftpserver.pl fixed the mail from address to be a
correctly formatted address otherwise the server response will be 501
Invalid address.
The specified curl binary will then be used to verify the running
server(s) instead of the development version. This is very useful in
some cases when the development version fails to verify correctly as
then the test case may not run at all.
The actual test will still be run with the "normal" curl executable
(unless the test case specifies something differently).
This function is meant to work *exactly* as curl_easy_perform() but will
use the event-based libcurl API internally instead of
curl_multi_perform(). To avoid relying on an actual event-based library
and to not use non-portable functions (like epoll or similar), there's a
rather inefficient emulation layer implemented on top of Curl_poll()
instead.
There's currently some convenience logging done in curl_easy_perform_ev
which helps when tracking down problems. They may be suitable to remove
or change once things seem to be fine enough.
curl has a new --test-event option when built with debug enabled that
then uses curl_easy_perform_ev() instead of curl_easy_perform(). If
built without debug, using --test-event will only output a warning
message.
NOTE: curl_easy_perform_ev() is not part if the public API on purpose.
It is only present in debug builds of libcurl and MUST NOT be considered
stable even then. Use it for libcurl-testing purposes only.
runtests.pl now features an -e command line option that makes it use
--test-event for all curl command line tests. The man page is updated.
These verfy that the 'memory tracking' subsystem is actually doing its
job when using curl tool (#96), a test in libtest (#558) and also a unit
test (#1330), in order to prevent regressions in this functionallity.
Introducing a number of options to the multi interface that
allows for multiple pipelines to the same host, in order to
optimize the balance between the penalty for opening new
connections and the potential pipelining latency.
Two new options for limiting the number of connections:
CURLMOPT_MAX_HOST_CONNECTIONS - Limits the number of running connections
to the same host. When adding a handle that exceeds this limit,
that handle will be put in a pending state until another handle is
finished, so we can reuse the connection.
CURLMOPT_MAX_TOTAL_CONNECTIONS - Limits the number of connections in total.
When adding a handle that exceeds this limit,
that handle will be put in a pending state until another handle is
finished. The free connection will then be reused, if possible, or
closed if the pending handle can't reuse it.
Several new options for pipelining:
CURLMOPT_MAX_PIPELINE_LENGTH - Limits the pipeling length. If a
pipeline is "full" when a connection is to be reused, a new connection
will be opened if the CURLMOPT_MAX_xxx_CONNECTIONS limits allow it.
If not, the handle will be put in a pending state until a connection is
ready (either free or a pipe got shorter).
CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE - A pipelined connection will not
be reused if it is currently processing a transfer with a content
length that is larger than this.
CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE - A pipelined connection will not
be reused if it is currently processing a chunk larger than this.
CURLMOPT_PIPELINING_SITE_BL - A blacklist of hosts that don't allow
pipelining.
CURLMOPT_PIPELINING_SERVER_BL - A blacklist of server types that don't allow
pipelining.
See the curl_multi_setopt() man page for details.
Remove internal separated behavior of the easy vs multi intercace.
curl_easy_perform() is now using the multi interface itself.
Several minor multi interface quirks and bugs have been fixed in the
process.
Much help with debugging this has been provided by: Yang Tse
lib/objnames.inc provides definition of curl_10char_object_name() shell
function. The intended purpose of this function is to transliterate a
(*.c) source file name that may be longer than 10 characters, or not,
into a string with at most 10 characters which may be used as an OS/400
object name.
Test case 1221 does unit testng of this function and also verifies
that it is possible to generate distinct short object names for all
curl and libcurl *.c source file names.
lib/objnames-test.sh is the shell script used for test case 1221.
tests/runtests.pl modified to accept shell script test cases.
More details inside lib/objnames.inc and lib/objnames-test.sh
runtests.pl -am now uses the "PASS/FAIL: [desc]" output for each
executed test. You can run 'make test-am' in the root build directory to
invoke that. The reason for this output style is to better allow generic
test suite parsers to also grok our test output.
The test Makefile now also tests that perl was indeed found and that the
PERL variable points to an executable before it tries to run the main
test perl script runtests.pl,
Replaced the Windows real path from mount hack with a more
reliable and simpler hack: the MSYS shell has a builtin pwd
which understands a -W option which does convertion to Windows
paths. Tested and confirmed that this works on all MSYS versions
I have back to a 3 year old one.
When a <file> part is now specified with no contents at all, this
will actually verify that the specified file has no contents at all.
Previously file contents would be ignored.
This is done introducing tags <file1> to <file4> besides existing <file> one,
as well as corresponding <stripfile1> to <stripfile4> ones, that can be used
in the <verify> section in the same way as the non-numbered ones.
Don't set the "has_openssl" variable if yassl or polarssl is found as
they will simply not work as 100% drop-in replacements for some of the
stuff the "OpenSSL" feature is used for.
I spotted this problem when doing test runs with PolarSSL builds.
There's a new 'http-proxy' server for tests that runs on a separate port
and lets clients do HTTP CONNECT to other ports on the same host to
allow us to test HTTP "tunneling" properly.
Test cases now have a <proxy> section in <verify> to check that the
proxy protocol part matches correctly.
Test case 80, 83, 95, 275, 503 and 1078 have been converted. Test 1316
was added.
Ensure verification takes place with no server commands file.
Ignore verbose setting for running server precheck.
Tweak unresponsive server message, to allow detection by haxx.se scripts.
When running torture tests, verify before each test case that required
pingpong servers which are supposed to be alive are actually responsive.
If found not responsive then restart them.
Feature string literal NTLM_SSO renamed to NTLM_WB.
Preprocessor symbol USE_NTLM_SSO renamed to WINBIND_NTLM_AUTH_ENABLED.
curl's 'long' option 'ntlm-sso' renamed to 'ntlm-wb'.
Fix some comments to make clear that this is actually a NTLM delegation.
The stopserver function would append pids to kill and could append them
without separating them with space properly. The result would be a very
large number that by (some implementations of) kill would be interpreted
as a negative number and that process group would be wiped...
Bug: http://curl.haxx.se/bug/view.cgi?id=3188836
Reported by: Greg Pratt
Removed the "netrc_debug" keyword replaced with --netrc-file additions.
Removed the debug code from Curl_parsenetrc as it is superseeded by
--netrc-file.
The test runner script now knows if unittests can run and the unit test
setup file says it is one. I also made runtests.pl deal with no
<command> tag set, so that the description file can get even simpler.
configure.ac: Test harness libhostname library will not be built for Windows.
runtests.pl: LD_PRELOAD mechanism will not be used to load libhostname
library on operating systems which lack LD_PRELOAD support.
Failed HTTPS tests: 301, 306, 311, 312, 313, 560
311, 312 need more detailed error reporting from axTLS.
313 relates to CRL, which hasn't been implemented yet.
If a command is set type="perl", it can now specify a perl program that will
be run instead of an ordinary curl or built tool.
A perl test automatically disables memory and valgrind debugging.
Due to the layout of the singletest function there are situations where
it returns before it clears the environment variables that were
especially set for the single specific test case. That could lead to
subsequent tests getting executed with environment variables sticking
around from a previous test which could lead to badness.
This change makes sure to clear all custom variables that may be laying
around from a previous round, before running a test case.
Reported by: Kamil Dudka
Bug: http://curl.haxx.se/mail/lib-2010-08/0141.html
A shared library tests/libtest/.libs/lihostname.so is preloaded in NTLM
test-cases to override the system implementation of gethostname(). It
makes it possible to test the NTLM authentication for exact match, and
this way test the implementation of MD4 and DES.
If LD_PRELOAD doesn't work, a debug build willl also workk as debug
builds are now made to prefer a specific environment variable and will
then return that content as host name instead of the actual one.
Kamil wrote the bulk of this, Daniel Stenberg polished it.
This is Hoi-Ho Chan's patch with some minor fixes by me. There
are some potential issues in this, but none worse than we can
sort out on the list and over time.
present in the tests/data/Makefile.am and outputs a notice message on the
screen if not. Each test file has to be included in that Makefile.am to get
included in release archives and forgetting to add files there is a common
mistake. This is an attempt to make it harder to forget.
given file, serverpid sub is renamed to pidfromfile. In addition it is
enhanced to make sure that it always returns zero unless a numerical
positive value is returned.
- To better reflect that only process existance is actually checked,
checkserver sub is renamed to processexists. In addition it is enhanced
making it remove the given pid file when the extracted pid is no longer
alive.
each test, so that the test suite can now be used to actually test the
verification of cert names etc. This made an error show up in the OpenSSL-
specific code where it would attempt to match the CN field even if a
subjectAltName exists that doesn't match. This is now fixed and verified
in test 311.
With the curl memory tracking feature decoupled from the debug build feature,
CURLDEBUG and DEBUGBUILD preprocessor symbol definitions are used as follows:
CURLDEBUG used for curl debug memory tracking specific code (--enable-curldebug)
DEBUGBUILD used for debug enabled specific code (--enable-debug)
